Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “support effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Investigating Uncertainty in Predicting Carbon Dynamics in North American Biomes: Putting Support-Effect Bias in Perspective

A fundamental strategy in NASA's Earth Observing System's (EOS) monitoring of vegetation and its contribution to the global carbon cycle is to rely on deterministic, process-based ecosystem models to make predictions of carbon flux over large regions. These models are parameterized (that is, the input variables are derived) using remotely sensed images such as those from the Moderate Resolution Imaging Spectroradiometer (MODIS), ground measurements and interpolated maps. Since early applications of these models, investigators have noted that results depend partly on the spatial support of the input variables. In general, the larger the support of the input data, the greater the chance that the effects of important components of the ecosystem will be averaged out. A review of previous work shows that using large supports can cause either positive or negative bias in carbon flux predictions. To put the magnitude and direction of these biases in perspective, we must quantify the range of uncertainty on our best measurements of carbon-related variables made on equivalent areas. In other words, support-effect bias should be placed in the context of prediction uncertainty from other sources. If the range of uncertainty at the smallest support is less than the support-effect bias, more research emphasis should probably be placed on support sizes that are intermediate between those of field measurements and MODIS. If the uncertainty range at the smallest support is larger than the support-effect bias, the accuracy of MODIS-based predictions will be difficult to quantify and more emphasis should be placed on field-scale characterization and sampling. This talk will describe methods to address these issues using a field measurement campaign in North America and "upscaling" using geostatistical estimation and simulation.

Dungan, Jennifer L.↗

An Experimental Investigation of Sting-Support Effects on Drag and a Comparison with Jet Effects at Transonic Speeds

This paper presents the results of an investigation of sting-support interference on afterbody drag at transonic speeds. Stings with varying diameter, cone angle, and cylindrical length were tested at the rea r of a model with various afterbody shapes. The data were obtained at an angle of attack of O deg. and at Mach numbers from 0.80 to 1.10. It was found that, in general, the addition of a sting caused a drag reduction. A method is presented whereby approximate sting-interferen ce corrections may be made to models with afterbodies and sting suppo rts of similar size and scale to those of this paper provided the bou ndary layer is turbulent at the model base and the Reynolds numbers a re of the same order of magnitude. Reynolds number of the tests prese nted varied from 15.0 x 10 (exp 6) to 17.4 x 10 (exp 6) based on body length. Sting effects from this investigation are compared with data of jet effects on the same afterbodies. The results of this comparis on indicate that for the more gradually contoured afterbodies, a stin g shape can be found which will duplicate the jet effects, but that f or blunt afterbodies no solid sting shape will duplicate the jet effe cts.

Cahn, Maurice S.↗

Periodic weight support effects on rat soleus fibers after hindlimb suspension

The morphological and histochemical properties of rat soleus muscles were investigated following one week of hindlimb suspension. Short-duration daily weight support activity is shown to ameliorate, but not prevent, soleus atrophy induced by hindlimb suspension. The results indicate that fiber cross-sectional area is more responsive to periodic weight support in dark than light ATPas fibers, and that muscle fiber atrophy need not be associated with a loss in succinate dehydrogenase activity.

Hauschka, Edward O.↗

An experimental investigation of sting-support effects on drag and a comparison with jet effects at transonic speeds

Various dummy stings were tested on the rear of a related series of afterbody shapes for Mach numbers from 0.80 to 1.10 and Reynolds numbers based on body length from 15.0 x 16 to the 6th power to 17.4 x 10 to the 6th power. A method is presented whereby approximate sting interference corrections can be made to models having afterbody shapes and sting supports similar to those of these tests if the Reynolds numbers are of the same order of magnitude and a turbulent boundary layer exists at the model base. Also presented is an analysis of jet duplication by use of a sting.

Cahn, Maurice S↗

Weighting Statistical Inputs for Data Used to Support Effective Decision Making During Severe Emergency Weather and Environmental Events

National Aeronautical and Space Administration (NASA) weather and atmospheric environmental organizations are insatiable consumers of geophysical, hydrometeorological and solar weather statistics. The expanding array of internet-worked sensors producing targeted physical measurements has generated an almost factorial explosion of near real-time inputs to topical statistical datasets. Normalizing and value-based parsing of such statistical datasets in support of time-constrained weather and environmental alerts and warnings is essential, even with dedicated high-performance computational capabilities. What are the optimal indicators for advanced decision making? How do we recognize the line between sufficient statistical sampling and excessive, mission destructive sampling ? How do we assure that the normalization and parsing process, when interpolated through numerical models, yields accurate and actionable alerts and warnings? This presentation will address the integrated means and methods to achieve desired outputs for NASA and consumers of its data.

Gardner, Adrian↗

Use of a multimission system for cost effective support of planetary science data processing

JPL's Multimission Operations Systems Office (MOSO) provides a multimission facility at JPL for processing science instrument data from NASA's planetary missions. This facility, the Multimission Image Processing System (MIPS), is developed and maintained by MOSO to meet requirements that span the NASA family of planetary missions. Although the word 'image' appears in the title, MIPS is used to process instrument data from a variety of science instruments. This paper describes the design of a new system architecture now being implemented within the MIPS to support future planetary mission activities at significantly reduced operations and maintenance cost.

Green, William B.↗

Unified User Interface to Support Effective and Intuitive Data Discovery, Dissemination, and Analysis at NASA GES DISC

Goddard Earth Sciences Data and Information Services Center (GES DISC) has been providing access to scientific data sets since 1990s. Beginning as one of the first Earth Observing System Data and Information System (EOSDIS) archive centers, GES DISC has evolved to offer a wide range of science-enabling services. With a growing understanding of needs and goals of its science users, GES DISC continues to improve and expand on its broad set of data discovery and access tools, sub-setting services, and visualization tools. Nonetheless, the multitude of the available tools, a partial overlap of functionality, and independent and uncoupled interfaces employed by these tools often leave the end users confused as of what tools or services are the most appropriate for a task at hand. As a result, some the services remain underutilized or largely unknown to the users, significantly reducing the availability of the data and leading to a great loss of scientific productivity. In order to improve the accessibility of GES DISC tools and services, we have designed and implemented UUI, the Unified User Interface. UUI seeks to provide a simple, unified, and intuitive one-stop shop experience for the key services available at GES DISC, including sub-setting (Simple Subset Wizard), granule file search (Mirador), plotting (Giovanni), and other services. In this poster, we will discuss the main lessons, obstacles, and insights encountered while designing the UUI experience. We will also present the architecture and technology behind UUI, including NodeJS, Angular, and Mongo DB, as well as speculate on the future of the tool at GES DISC as well as in a broader context of the Space Science Informatics.

web portal↗

Space shuttle launch vehicle (13 P-OTS) strut support interference effects study in the Rockwell International 7- by 7-foot trisonic wind tunnel (IA68)

Strut support interference investigations were conducted on an 0.004-(-) scale representation of the space shuttle launch vehicle in order to determine transonic and supersonic model support interference effects for use in a future exhaust plume effects study. Strut configurations were also tested. Orbiter, external tank, and solid rocket booster pressures were recorded at Mach numbers 0.9, 1.2, 1.5, and 2.0. Angle of attack and angle of sideslip were varied between plus or minus 4 degrees in 2 degree increments. Parametric variations consisted only of the strut configurations.

Rogge, R. L.↗

The effects of supports on the flow behind a body

Two cases in a supersonic flow with a turbulent boundary layer are studied in order to determine the effects of supports on models with a flat base. The first concerns the effect of various obstacles situated upstream of the two dimensional base, at Mach 2. The second relates to a body of revolution passing through the throat of the jet from upstream to downstream. The interference of obstacles simulating supporting masts is examined for the base, both bare and with a sting, at Mach 1.94. Without any support, the drag of a conical-cylindrical body of revolution was measured by means of the ONERA magnetic suspension. The interference of various stings was studied at Mach 2.4 with a laminary boundary layer and with a separated turbulent boundary layer. The mechanism of the interference of a sting, progressively approached axially to the base, was determined.

Rebuffet, P.↗

Jet exhaust and support interference effects on the transonic aerodynamic characteristics of a fighter model with two widely spaced engines

Jet exhaust, nozzle installation, and model support interference effects on the longitudinal aerodynamic characteristics of a twin-engine fighter model were determined. Realistic jet exhaust nozzle configurations and a reference configuration with a simulated vertical-tail support were tested. Free-stream Mach number was varied from 0.6 to 1.2, and model angle of attack from 0 deg to 9 deg. The jet exhaust affected drag more than it affected lift and pitching moment. The largest effects occurred at a Mach number of 0.9 and for the afterburning mode of exhaust nozzle operation. The combined differences between the aerodynamic characteristics of the realistic and reference configurations (which were due to afterbody and nozzle contours, jet operation, and simulated reference support interference) were considerably different from those for the jet interference alone.

Compton, W. B., III↗

Support System Effects on the DLR-F6 Transport Configuration in the National Transonic Facility

An experimental investigation of the DLR-F6 generic transport configuration was conducted in the NASA NTF for use in the Drag Prediction Workshop. As data from this experimental investigation was collected, a large difference in drag values was seen between the NTF test and an ONERA test that was conducted several years ago. After much investigation, it was determined that this difference was likely due to a sting effect correction applied to the ONERA data which NTF does not use. This insight led to the present work. In this study, a computational assessment has been undertaken to investigate model support system interference effects on the DLR-F6 transport configuration. The configurations computed during this investigation were the isolated wing-body, the wing-body with the full support system (blade and sting), the wing-body with just the blade, and the wing-body with just the sting. The results from this investigation show the same trends that ONERA saw when they conducted a similar experimental investigation in the S2MA tunnel. Computational results suggest that the blade contributed an interference type of effect, the sting contributed a general blockage effect, and the full support system combined these effects.

Rivers, Melissa B.↗

Further Investigation of the Support System Effects and Wing Twist on the NASA Common Research Model

An experimental investigation of the NASA Common Research Model was conducted in the NASA Langley National Transonic Facility and NASA Ames 11-foot Transonic Wind Tunnel Facility for use in the Drag Prediction Workshop. As data from the experimental investigations was collected, a large difference in moment values was seen between the experiment and computational data from the 4th Drag Prediction Workshop. This difference led to a computational assessment to investigate model support system interference effects on the Common Research Model. The results from this investigation showed that the addition of the support system to the computational cases did increase the pitching moment so that it more closely matched the experimental results, but there was still a large discrepancy in pitching moment. This large discrepancy led to an investigation into the shape of the as-built model, which in turn led to a change in the computational grids and re-running of all the previous support system cases. The results of these cases are the focus of this paper.

Rivers, Melissa B.↗

Wind tunnel blockage and support interference effects on winged-body models at Mach numbers from 0.6 to 1.0

Three sting-mounted winged-body models with tunnel blockages of 0.1, 1.0, and 2.0 percent were tested in the Lewis Research Center's 8- by 6- Foot Supersonic Wind Tunnel. Fuselage pressures were obtained over a Mach number range of 0.6 to 1.0 at angles of attack from 0 deg to 4 deg. Two other types of model support were investigated, which included simulated wing-tip and fuselage support-strut mountings. The effects of tunnel porosity and sidewall geometry were also investigated. Model blockage effects were small up to M sub 0 = 0.95. At higher speeds the major blockage effect observed was a displacement of the local transonic terminal shocks on the model. The effects of the wing-tip type of model support were small up to M sub 0 = 0.95, but disturbances were observed on the fuselage at higher speeds. Changes in local tunnel porosity were effective in reducing the disturbances up to M sub 0 = 0.975, but a change in sidewall geometry was not.

Blaha, B. J.↗

Support System Effects on the NASA Common Research Model

An experimental investigation of the NASA Common Research Model was conducted in the NASA Langley National Transonic Facility and NASA Ames 11-Foot Transonic Wind Tunnel Facility for use in the Drag Prediction Workshop. As data from the experimental investigations was collected, a large difference in moment values was seen between the experimental and the computational data from the 4th Drag Prediction Workshop. This difference led to the present work. In this study, a computational assessment has been undertaken to investigate model support system interference effects on the Common Research Model. The configurations computed during this investigation were the wing/body/tail=0deg without the support system and the wing/body/tail=0deg with the support system. The results from this investigation confirm that the addition of the support system to the computational cases does shift the pitching moment in the direction of the experimental results.

Rivers, S. Melissa B.↗

Designing for Maintainability and System Availability

The final goal for a delivered system (whether a car, aircraft, avionics box or computer) should be its availability to operate and perform its intended function over its expected design life. Hence, in designing a system, we cannot think in terms of delivering the system and just walking away. The system supplier needs to provide support throughout the operating life of the product. Here, supportability requires an effective combination of reliability, maintainability, logistics and operations engineering (as well as safety engineering) to have a system that is available for its intended use throughout its designated mission lifetime. Maintainability is a key driving element in the effective support and upkeep of the system as well as providing the ability to modify and upgrade the system throughout its lifetime. This paper then, will concentrate on maintainability and its integration into the system engineering and design process. The topics to be covered include elements of maintainability, the total cost of ownership, how system availability, maintenance and logistics costs and spare parts cost effect the overall program costs. System analysis and maintainability will show how maintainability fits into the overall systems approach to project development. Maintainability processes and documents will focus on how maintainability is to be performed and what documents are typically generated for a large scale program. Maintainability analysis shows how trade-offs can be performed for various alternative components. The conclusions summarize the paper and are followed by specific problems for hands-on training.

Lalli, Vincent R.↗