Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “stucture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Tensor spin observables and spin stucture at low Q{sup 2}

We discuss recent spin structure results from Jefferson Lab, and outline an emerging program to study tensor spin observables using solid deuteron targets. These new experiments open the potential to study hidden color, the tensor nature of short range correlations, and to probe for exotic gluonic states.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural studies on Na[subscript 0.75]CoO[subscript 2] thermoelectric material at high pressures

The crystal structure of Na{sub 0.75}CoO{sub 2} was studied at ambient and low temperatures down to 10 K at pressures up to 40 GPa using synchrotron x-rays and a diamond cell in angle dispersion geometry. A reduction in the c/a ratio was observed at both conditions with the application of pressure. An increase in Co-O bond lengths and a decrease in Na-O bond lengths were observed above 10 GPa. The results of the density functional calculations performed agree well with the pressure induced bond length changes. The anomalous change in the c/a ratio and bond lengths indicate a pressure induced isostructural phase transition above 10 GPa. Bulk modulus calculations show this compound is less compressible than its hydrated analogues.

36 MATERIALS SCIENCE↗

Studies on Stuctural and Electrical Properties of (1-X)Ba(Fe{sub 0.5}Nb{sub 0.5})O{sub 3}-xSrTiO{sub 3}, with X = 0, 0.05 Ceramics

A polycrystalline ceramics of (1-x)Ba(Fe{sub 0.5}Nb{sub 0.5})O{sub 3}-xSrTiO{sub 3}, with x = 0, 0.05 was synthesized by high temperature solid-state reaction technique. X-ray diffraction analysis of the powders suggests the formation of a single-phase material with monoclinic structure. SEM images exhibit the uniform distribution of grains of the sample. Sintered pellets were investigated for its dielectric ({epsilon} and tan{delta}) properties in the temperature range of 30 deg. C - 270 deg. C and in the frequency range of 100Hz-5MHz suggest that the compound do not have dielectric anomaly in the studied frequency and temperature ranges.

36 MATERIALS SCIENCE↗

Possible Methods to Estimate Core Location in a Beyond-Design-Basis Accident at a GE BWR with a Mark I Containment Stucture

It is difficult to track to the location of a melted core in a GE BWR with Mark I containment during a beyond-design-basis accident. The Cooper Nuclear Station provided a baseline of normal material distributions and shielding configurations for the GE BWR with Mark I containment. Starting with source terms for a design-basis accident, methods and remote observation points were investigated to allow tracking of a melted core during a beyond-design-basis accident. The design of the GE BWR with Mark-I containment highlights an amazing poverty of expectations regarding a common mode failure of all reactor core cooling systems resulting in a beyond-design-basis accident from the simple loss of electric power. This design is shown in Figure 1. The station blackout accident scenario has been consistently identified as the leading contributor to calculated probabilities for core damage. While NRC-approved models and calculations provide guidance for indirect methods to assess core damage during a beyond-design-basis loss-of-coolant accident (LOCA), there appears to be no established method to track the location of the core directly should the LOCA include a degree of fuel melt. We came to the conclusion that - starting with detailed calculations which estimate the release and movement of gaseous and soluble fission products from the fuel - selected dose readings in specific rooms of the reactor building should allow the location of the core to be verified.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Characterization and Mechanistic Studies of the Dehydrogenation of NHxBHx Materials

In this review we cover the recent developments providing insight into the chemical and physical properties for a series of hydrogen-rich NBHx materials that are of interest as energy storage media for fuel cell power applications. These materials, ammonium borohydride (ABH2, [NH4][BH4]; 240 g H2/kg; 165 g/liter), ammonia borane (AB, [NH3BH3]; 196 g H2/kg; 147 g/liter) and diammoniate of diborane (DADB, [NH3BH2NH3][BH4]; 196 g H2/kg; ca. 151 g/liter), release hydrogen by a series of moderately exothermic reaction pathways. The advantage of these materials is that hydrogen release is kinetically controlled and occurs at relatively low temperatures and moderate pressures. The challenges are devising economical pathways to regenerate the fully charged hydrogen storage materials off board and understanding and controlling the formation of volatile impurities that decrease the purity of the hydrogen available for polymer electrolyte membrane fuel cell applications. The focus of this review is on the solid phase ABH2, AB and DADB materials to complement the coverage of AB in other recent review articles [1-2]. Additional discussion is given on the decomposition products of these materials, polyaminoborane (PAB, [NH2BH2]n) and polyiminoborane (PIB, [NHBH]n). The article is organized into 3 sections, (i) Synthesis and stuctural characterization; (ii) Kinetics and thermodynamics of hydrogen release and (iii) Outstanding challenges for breakthroughs. This work was supported by the US Department of Energy Basic Energy Sciences' Chemical Sciences, Geosciences & Biosciences Division. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

08 HYDROGEN↗

Structure, luminescence and thermal quenching properties of Eu doped Sr{sub 2−x}Ba{sub x}Si{sub 5}N{sub 8} red phosphors

Eu{sup 2+} doped Sr{sub 2-x}Ba{sub x}Si{sub 5}N{sub 8} phosphors were synthesized at 1610 ℃ for 4 h via the solid-state reaction method. The XRD results confirm that the complete solid solutions are formed. With the increase of x, the emission spectra show an obvious blue-shift from 610 nm to 585 nm under the excitation of 460 nm. The color tone can be tuned from yellow to red. The corresponding mechanism for the blue-shift of peak-wavelength is studied in detail. The results of decomposed Gaussian spectra and fluorescence lifetime show that the local coordination structure surrounding activator ions changes with increasing x value. It is found that the probability of Eu occupying Sr1 and Sr2 site is dependent on Ba/Sr ratio. The variation of thermal quenching properties and the corresponding mechanism is discussed in detail. The results indicate that Eu{sup 2+} doped Sr{sub 2-x}Ba{sub x}Si{sub 5}N{sub 8} is a promising orange red-emitting phosphor for near UV or blue light-pumped white light-emitting-diodes (wLEDs). - Graphical abstract: Eu{sup 2+} doped Sr{sub 2-x}Ba{sub x}Si{sub 5}N{sub 8} solid solutions were prepared by the solid-state reaction method. The structure, luminescence and thermal quenching properties with varying Ba/Sr ratio were investigated in detail. - Highlights: • The stucture and luminescence properties of Eu doped Sr{sub 2-x}Ba{sub x}Si{sub 5}N{sub 8} phosphors were investigated. • The samples with the intermediate compositions(x=1.0,1.5) show better stability than the end members of both Sr{sub 2}Si{sub 5}N{sub 8}:Eu{sup 2+} and Ba{sub 2}Si{sub 5}N{sub 8}:Eu{sup 2+}. • The possible mechanism for the improvement of thermal quenching properties was proposed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Arsenic induces structural and compositional colonic microbiome change and promotes host nitrogen and amino acid metabolism

Chronic exposure to arsenic in drinking water causes cancer and non-cancer diseases. However, mechanisms for chronic arsenic-induced pathogenesis, especially in response to lower exposure levels, are unclear. In addition, the importance of health impacts from xeniobiotic-promoted microbiome changes is just being realized and effects of arsenic on the microbiome with relation to disease promotion are unknown. To investigate impact of arsenic exposure on both microbiome and host metabolism, the stucture and composition of colonic microbiota, their metabolic phenotype, and host tissue and plasma metabolite levels were compared in mice exposed for 2, 5, or 10 weeks to 0, 10 (low) or 250 (high) ppb arsenite (As(III)). Genotyping of colonic bacteria revealed time and arsenic concentration dependent shifts in community composition, particularly the Bacteroidetes and Firmicutes, relative to those seen in the time-matched controls. Arsenic-induced erosion of bacterial biofilms adjacent to the mucosal lining and changes in the diversity and abundance of morphologically distinct species indicated changes in microbial community structure. Bacterical spores increased in abundance and intracellular inclusions decreased with high dose arsenic. Interestingly, expression of arsenate reductase (arsA) and the As(III) exporter arsB, remained unchanged, while the dissimilatory nitrite reductase (nrfA) gene expression increased. In keeping with the change in nitrogen metabolism, colonic and liver nitrite and nitrate levels and ratios changed with time. In addition, there was a concomitant increase in pathogenic arginine metabolites in the mouse circulation. These data suggest that arsenic exposure impacts the microbiome and microbiome/host nitrogen metabolism to support disease enhancing pathogenic phenotypes. - Highlights: • Arsenic exposure induces changes in host and host nitrogen metabolism that cause progresive change in the microbiome. • A polyphasic approach reveals changes in microbial community structure, composition and nitrite reductase expression. • The profile of nitrogen and nitroamino acid change caused by arsenic may relect increased risk of cardiovascular pathogenesis.

60 APPLIED LIFE SCIENCES↗

An ab initio approach to understanding the specific ion effect

Although there is a consensus that large, polarizable anions will adsorb to the air-water interface, the precise interactions that give rise to surface enhancement are still being debated. Previously, we have demonstrated that there is a significant dependence on the choice of molecular interaction potential for iodide adsorption at the air-water interface. Specifically, density functional theory (DFT) based interaction potentials lead to significantly less adsorption than empirical interaction potentials that include polarization. We have also demonstrated that DFT based interaction potentials can accurately capture the structure of the first solvation shell of both simple and polyatomic anions as compared to multi-edge X-ray absorption fine structure (XAFS) experiments. We continue to push DFT by examining the surface propensity and structure of polyatomic anions that exhibit both chaotropic and kosmotropic characteristics as classified by the Hofmeister series. We will investigate the role of local solvation effects of SCN- and compare to previous studies on I- and IO3- under both bulk and interfacial conditions. A picture emerges where we can correlate local solvation stucture to the Hofmeister series.

Ion adsorption to the water/air Interface↗

Synthesis and characterization of NiO nanopowder by sol-gel process

Preparation of nickel oxide (NiO) nanopowder by sol-gel process has been studied. NiO nanopowders were obtained by sol-gel method by using nickel nitrate hexahydrate and sodium hydroxide and aquadest were used as precursor, agent precipitator and solvent, respectively. The powders were formed by drying at 110°C and followed by heating in the furnace at 400°C for 1.5 hours. The product was obtained black powder. The product was characterized by Energy Dispesive X-ray Fluorescence (ED-XRF), X-ray diffraction (XRD) and Scanning Electron Microscopy (SEM). The ED-XRF pattern shows the composition of NiO produced was 97.1%. The XRD pattern showed NiO forms were produced generally in monoclinic stucture. The crystalline size of NiO was obtained in the range 40-85 nm. SEM micrograph clearly showed that powder had a spherical with uniform distribution size is 0.1-1.0 µm approximately.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Density functional theory study of cerium deuterides

Here, we present a density functional theory study of cerium deuterides, varying deuterium content and temperature. Results are discussed in relation to ejecta experiments recently described in [J. Dynam. Mat. Behav. 1, 12 (2017)]. Using quantum molecular dynamics, we calculate diffusion coefficients, radial distribution functions, and heat capacities of these materials. Properties are calculated over temperatures ranging from 500-4000K at near ambient pressure and at 2.37 fold compression. We find that deuterium diffusion occurs rapidly accross this temperature and compression region and that heat capacity calculations are in agreement with approximations made in experiments. For cerium metal, a comparison of self-diffusion coefficient and viscosity with experimental data and analytical models shows excellent agreement. Lastly, we discuss the stucture of cerium deuterides with respect to radial distribution functions and provide fitted equations for diffusion coefficients over temperature.

36 MATERIALS SCIENCE↗

X-ray Crystal Structure of the Bacterial Conjugation Factor PsiB, a Negative Regulator of RecA

During bacterial conjugation, genetic material from one cell is transferred to another as single-stranded DNA. The introduction of single-stranded DNA into the recipient cell would ordinarily trigger a potentially deleterious transcriptional response called SOS, which is initiated by RecA protein filaments formed on the DNA. During F plasmid conjugation, however, the SOS response is suppressed by PsiB, an F-plasmid-encoded protein that binds and sequesters free RecA to prevent filament formation. Among the many characterized RecA modulator proteins, PsiB is unique in using sequestration as an inhibitory mechanism. We describe the crystal structure of PsiB from the Escherichia coli F plasmid. The stucture of PsiB is surprisingly similar to CapZ, a eukaryotic actin filament capping protein. Structure-directed neutralization of electronegative surfaces on PsiB abrogates RecA inhibition whereas neutralization of an electropositive surface element enhances PsiB inhibition of RecA. Together, these studies provide a first molecular view of PsiB and highlight its use as a reagent in studies of RecA activity.

59 BASIC BIOLOGICAL SCIENCES↗

TU-EF-304-08: LET-Based Inverse Planning for IMPT

Purpose: Cell survival experiments suggest that the relative biological effectiveness (RBE) of proton beams depends on linear energy transfer (LET), leading to higher RBE near the end of range. With intensity-modulated proton therapy (IMPT), multiple treatment plans that differ in the dose contribution per field may yield a similar physical dose distribution, but the RBE-weighted dose distribution may be disparate. RBE models currently do not have the required predictive power to be included in an optimization model due to the variations in experimental data. We propose an LET-based planning method that guides IMPT optimization models towards plans with reduced RBE-weighted dose in surrounding organs at risk (OARs) compared to inverse planning based on physical dose alone. Methods: Optimization models for physical dose are extended with a term for dose times LET (doseLET). Monte Carlo code is used to generate the physical dose and doseLET distribution of each individual pencil beam. The method is demonstrated for an atypical meningioma patient where the target volume abuts the brainstem and partially overlaps with the optic nerve. Results: A reference plan optimized based on physical dose alone yields high doseLET values in parts of the brainstem and optic nerve. Minimizing doseLET in these critical structures as an additional planning goal reduces the risk of high RBE-weighted dose. The resulting treatment plan avoids the distal fall-off of the Bragg peaks for shaping the dose distribution in front of critical stuctures. The maximum dose in the OARs evaluated with RBE models from literature is reduced by 8–14\% with our method compared to conventional planning. Conclusion: LET-based inverse planning for IMPT offers the ability to reduce the RBE-weighted dose in OARs without sacrificing target dose. This project was in part supported by NCI - U19 CA 21239.

60 APPLIED LIFE SCIENCES↗