Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “structural buckling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Higher-order topology induced by structural buckling

Abstract Higher-order topological insulator (HOTI) states, such as two-dimension (2D) HOTI featured with topologically protected corner modes at the intersection of two gapped crystalline boundaries, have attracted much recent interest. However, the physical mechanism underlying the formation of HOTI states is not fully understood, which has hindered our fundamental understanding and discovery of HOTI materials. Here we propose a mechanistic approach to induce higher-order topological phases via structural buckling of 2D topological crystalline insulators (TCIs). While in-plane mirror symmetry is broken by structural buckling, which destroys the TCI state, the combination of mirror and rotation symmetry is preserved in the buckled system, which gives rise to the HOTI state. We demonstrate that this approach is generally applicable to various 2D lattices with different symmetries and buckling patterns, opening a horizon of possible materials to realize 2D HOTIs. The HOTIs so generated are also shown to be robust against buckling height fluctuation and in-plane displacement. A concrete example is given for the buckled $\beta $-Sb monolayer from first-principles calculations. Our finding not only enriches our fundamental understanding of higher-order topology, but also opens a new route to discovering HOTI materials.

42 ENGINEERING↗
DOE OSTI2021

Metastable piezoelectric group-IV monochalcogenide monolayers with a buckled honeycomb structure

Multiple two-dimensional materials are being naïvely termed stable on the grounds of displaying phonon dispersions with no negative frequencies and of not collapsing on molecular dynamics calculations at fixed volume. But, if these phases do not possess the smallest possible structural energy, how does one understand and establish their actual meta stability? To answer this question, twelve two-dimensional group-IV monochalcogenide monolayers (SiS, SiSe, SiTe, GeS, GeSe, GeTe, SnS, SnSe, SnTe, PbS, PbSe, and PbTe) with a buckled honeycomb atomistic structure—belonging to symmetry group P3m1—displaying an out-of-plane intrinsic electric polarization are shown to be metastable by three independent methods. First, we uncover a coordination-preserving structural transformation from the low-buckled honeycomb structure onto the lower-energy Pnm2 1 (or Pmmn for PbS, PbSe, and PbTe) phase to estimate energy barriers E B that must be overcome during such structural transformation. Using the curvature of the local minima and E B as inputs to Kramers escape formula, large escape times are found, implying the structural metastability of the buckled honeycomb phase (with the exception of PbS and PbSe, these phases display escape times ranging from 700 years to multiple times the age of the universe and can be considered “stable” for practical purposes in that relative sense). The second demonstration is provided by phonon dispersion relations that include the effect of long-range Coulomb forces and display no negative vibrational modes. The third and final demonstration of structural metastability is furnished by room-temperature ab initio molecular dynamics for selected compounds. Here, the magnitude of the electronic band gap evolves with chemical composition. Different from other binary two-dimensional compounds such as transition metal dichalcogenide monolayers and hexagonal boron nitride monolayers which only develop an in-plane piezoelectric response, the twelve group-IV monochalcogenide monolayers with a buckled honeycomb structure also display out-of-plane piezoelectric properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Hierarchical domain structures in buckled ferroelectric free sheets

Flat elastic sheets tend to display wrinkles and folds. From pieces of clothing down to two-dimensional crystals, these corrugations appear in response to strain generated by sheet compression or stretching, thermal or mechanical mismatch with other elastic layers, or surface tension. Extensively studied in metals, polymers and, — more recently — in van der Waals exfoliated layers, with the advent of thin single crystal freestanding films of complex oxides, researchers are now paying attention to novel microstructural effects induced by bending ferroelectric-ferroelastics, where polarization is strongly coupled to lattice deformation. Here we show that wrinkle undulations in BaTiO3 sheets bonded to a viscoelastic substrate transform into a buckle delamination geometry when transferred onto a rigid substrate. Using spatially resolved techniques at different scales (Raman, scanning probe and electron microscopy), we show how these delaminations in the free BaTiO3 sheets display a self-organization of ferroelastic domains along the buckle profile that strongly differs from the more studied sinusoidal wrinkle geometry. Moreover, we disclose the hierarchical distribution of a secondary set of domains induced by the misalignment of these folding structures from the preferred in-plane crystallographic orientations. Our results disclose the relevance of the morphology and orientation of buckling instabilities in ferroelectric free sheets, for the stabilization of different domain structures, pointing to new routes for domain engineering of ferroelectrics in flexible oxide sheets.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Systems for mechanical logic based on additively manufacturable micro-mechanical logic gates

The present disclosure is directed to various mechanical logic gates. In one example a mechanical logic NOT gate system is formed which has a first pair of bi-stable buckling structures each being operatively connected at a first connection point thereof to one another, and also to a first rigid structure at second connection points, the first rigid structure being held stationary. A second pair of bi-stable buckling flexures is each operatively connected at first connection points thereof to each other and at second connection points thereof to a second rigid structure being held stationary. An output element is coupled a first one of each of the first and second pairs of bi-stable buckling structures. An input element is coupled to a second one of each of the first and second pairs of bi-stable buckling structures. The output element moves from a logic 1 position to a logic 0 position in response to movement of the input element from a logic 0 position to a logic 1 positions, respectively.

42 ENGINEERING↗
DOE OSTI2020

Topological band structure transitions and goniopolar transport in honeycomb antimonene as a function of buckling

The electronic band topology of monolayer β-Sb (antimonene) is studied from the flat honeycomb to the equilibrium buckled structure using first-principles calculations and analyzed using a tight-binding model and low-energy Hamiltonians. In flat monolayer Sb, the Fermi level occurs near the intersection of two warped Dirac cones, one associated with the pz orbitals, and one with the {p x , p y } orbitals. The differently oriented threefold warping of these two cones leads to an unusually shaped nodal line, which leads to anisotropic in-plane transport properties and goniopolarity. A slight buckling opens a gap along the nodal line except at six remaining Dirac points, protected by symmetry. Under increasing buckling, pairs of Dirac points of opposite winding number annihilate at a critical buckling angle. At a second critical angle, the remaining Dirac points disappear when the band structure opens a gap. Spin-orbit coupling and edge states are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Tunable polar distortions and magnetism in Gd 𝑥 ⁢La 1−𝑥 ⁢PtSb epitaxial films

Hexagonal 𝐴⁢𝐵⁢𝐶 intermetallics are predicted to have tunable ferroelectric, topological, and magnetic properties as a function of the polar buckling of 𝐵⁢𝐶 atomic planes. Here, we report the impact of isovalent lanthanide substitution on the buckling, structural phase transitions, and electronic and magnetic properties of Gd 𝑥 ⁢La 1−𝑥 ⁢PtSb films grown by molecular beam epitaxy (MBE) on 𝑐 plane sapphire substrates. The Gd 𝑥 ⁢La 1−𝑥 ⁢PtSb films form a solid solution from 𝑥=0 to 𝑥=1 and retain the polar hexagonal structure (𝑃⁢6 3 ⁢𝑚⁢𝑐) out to 𝑥 ≤ 0.95. With increasing 𝑥, the PtSb buckling increases and the out-of-plane lattice constant 𝑐 decreases due to the lanthanide contraction. While hexagonal LaPtSb is a highly conductive polar metal, the carrier density decreases with 𝑥 until an abrupt phase transition to a zero band overlap semimetal is found for cubic GdPtSb at 𝑥=1. The magnetic susceptibility peaks at small but finite 𝑥, which we attribute to Ruderman-Kittel-Kasuya-Yosida (RKKY) coupling between localized 4⁢𝑓 moments, whose concentration increases with 𝑥, and free carriers that decrease with 𝑥. Samples with 𝑥≥0.3 show antiferromagnetic Curie-Weiss behavior and a Neel temperature that increases with 𝑥. The Gd 𝑥 ⁢La 1−𝑥 ⁢PtSb system provides opportunities to dramatically alter the polar buckling and concentration of local 4⁢𝑓 moments.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Giant anisotropic in-plane thermal conduction induced by Anomalous phonons in pentagonal PdSe 2

In two-dimensional materials, different atomic stacking induces anisotropic atomic interactions and phonon dispersions, leading to the anisotropy of in-plane thermal transport. In this work, we report an exceptional case in layered pentagonal PdSe 2 , where the bonding, force constants, and lattice constants are nearly-equal along the in-plane crystallographic axis directions, while the thermal conductivity is surprisingly much greater along b-axis than along a-axis with a ratio up to 1.8. Such strong anisotropy is not only unexpected in in-plane uniform structured materials, but also 2 comparable to the record high in-plane anisotropic thermal conductivity in the nonuniform structured material reported to date (the ratio is ~2.0 in TiS 3 ). By combining the inelastic X-ray scattering measurement and the first-principles calculations, we attribute such high anisotropy to the low-energy phonons along a-axis, particularly their lower group velocities and “avoided-crossing” behavior. The different buckling structures between a- (zigzag-type) and b-axis (flat-type) are mainly responsible for such unique phonon dynamics properties of PdSe 2 . This finding helps to discover materials with high anisotropic in-plane thermal conductivity in uniform structures and reveals new physics of anisotropy of in-plane thermal conduction. Due to the unique features in structure and thermal transport properties, PdSe 2 may serve as a new platform for designing novel devices to route heat flow precisely at the nanoscale.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Zero-Valent Palladium Single-Atoms Catalysts Confined in Black Phosphorus for Efficient Semi-Hydrogenation

Single-atom catalysts (SACs) represent a new frontier in heterogeneous catalysis due to their remarkable catalytic properties and maximized atomic utilization. However, single atoms often bond to the support with polarized electron density and thus exhibit a high valence state, limiting their catalytic scopes in many chemical transformations. In this study, it is demonstrated that 2D black phosphorus (BP) acts as giant phosphorus (P) ligand to confine a high density of single atoms (e.g., Pd 1 , Pt 1 ) via atomic layer deposition. Unlike other 2D materials, BP with relatively low electronegativity and buckled structure favors the strong confinement of robust zero-valent palladium SACs in the vacancy site. Metallic Pd 1 /BP SAC shows a highly selective semi-hydrogenation of phenylacetylene toward styrene, distinct from metallic Pd nanoparticles that facilitate the formation of fully hydrogenated products. Density functional theory calculations reveal that Pd atom forms covalent-like bonding with adjacent P atoms, wherein H atoms tend to adsorb, aiding the dissociative adsorption of H 2 . Zero-valent Pd in the confined space favors a larger energy gain for the synthesis of partially hydrogenated product over the fully hydrogenated one. This work provides a new route toward the synthesis of zero-valent SACs on BP for organic transformations.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Plumbene: a comprehensive review of theoretical and experimental advances

Plumbene, a two-dimensional (2D) material consisting of a single layer of lead (Pb) atoms in a honeycomb lattice, stands as a pioneering addition to the elemental 2D material family. Here, this comprehensive review encapsulates the theoretical predictions and experimental advancements that underscore its potential. With properties shaped by significant spin-orbit coupling and structural buckling, plumbene offers a playground for phenomena like the quantum spin Hall effect, superconductivity, and topological phase transitions. Despite promising theoretical insights, experimental realization has encountered challenges, primarily due to high reactivity of Pb and the need for precise fabrication conditions. This paper critically examines the electronic, thermal, mechanical, and topological attributes of plumbene, alongside synthesis methods, functionalization techniques, and substrate effects. It further proposes directions for addressing synthesis challenges and integrating plumbene into advanced technologies, particularly in electronic, spintronic, and quantum computing applications. This review aims to bridge the gap between theoretical potential and experimental progress, fostering a deeper understanding of this intriguing material.

2D materials↗
DOE OSTI2021

Structural stability and artificial buckling modes in topology optimization

Abstract This paper demonstrates how a strain energy transition approach can be used to remove artificial buckling modes that often occur in stability constrained topology optimization problems. To simulate the structural response, a nonlinear large deformation hyperelastic simulation is performed, wherein the fundamental load path is traversed using Newton’s method and the critical buckling load levels are estimated by an eigenvalue analysis. The goal of the optimization is to minimize displacement, subject to constraints on the lowest critical buckling loads and maximum volume. The topology optimization problem is regularized via the Helmholtz PDE-filter and the method of moving asymptotes is used to update the design. The stability and sensitivity analyses are outlined in detail. The effectiveness of the energy transition scheme is demonstrated in numerical examples.

Dalklint, Anna (ORCID:0000000346195205)↗
DOE OSTI2020

Noncollinear magnetic structure and magnetoelectric coupling in buckled honeycomb Co 4 Nb 2 O 9 : A single-crystal neutron diffraction study

Through an analysis of single-crystal neutron diffraction data, we present the magnetic structure and magnetoelectric properties of Co 4 Nb 2 O 9 under various magnetic fields. In zero field, neutron diffraction experiments below T N =27K reveal that the Co 2+ moments order in the (ab) plane without any spin canting along the c axis, manifested by the magnetic symmetry C2/c'. Along each Co chain parallel to the c axis, the moments of nearest-neighbor Co atoms order ferromagnetically with a small cant away from the next-nearest-neighbor Co moments. Under the applied magnetic field H ∥ a, three magnetic domains were aligned with their major magnetic moments perpendicular to the magnetic field with no other observable magnetic transitions. The influences of magnetic fields on the magnetic structures associated with the observed magnetoelectric coupling are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Auxetic two-dimensional transition metal selenides and halides

Abstract Auxetic two-dimensional (2D) materials provide a promising platform for biomedicine, sensors, and many other applications at the nanoscale. In this work, utilizing a hypothesis-based data-driven approache, we identify multiple materials with remarkable in-plane auxetic behavior in a family of buckled monolayer 2D materials. These materials are transition metal selenides and transition metal halides with the stoichiometry MX (M = V, Cr, Mn, Fe, Co, Cu, Zn, Ag, and X = Se, Cl, Br, I). First-principles calculations reveal that the desirable auxetic behavior of these 2D compounds originates from the interplay between the buckled 2D structure and the weak metal–metal interaction determined by their electronic structures. We observe that the Poisson’s ratio is sensitive to magnetic order and the amount of uniaxial stress applied. A transition from positive Poisson’s ratio (PPR) to negative Poisson’s ratio (NPR) for a subgroup of MX compounds under large uniaxial stress is predicted. The work provides a guideline for the future design of 2D auxetic materials at the nanoscale.

2d materials↗
DOE OSTI2020

Buckled honeycomb antimony: Higher order topological insulator and its relation to the Kekulé lattice

Higher order topological tnsulators are d-spatial dimensional systems featuring topologically protected gapless states at their (d-n)-dimensional boundaries. With the help of ab initio calculations and tight-binding models along with symmetry considerations, we show that monolayer buckled honeycomb structures of group-V elements (Sb, As), which have already been synthesized, belong in this category and have a spinless charge fractionalization of $\frac{e}{2}$ at the corner states as well as weak topological edge states, protected by the S 6 symmetry operation, which classify this system as a quadrupole topological insulator. The robustness of these edge and corner states to perturbations is explicitly demonstrated.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Intercalation And High-Pressure Effects On Structural Phase Transitions In Layered As x P 1-x Alloys

This project was aimed at understanding the role of composition, intercalation, and high pressure on the structural evolution of black phosphorous (BP) and layered arsenic phosphorous alloys, As y P 1-y . Under normal conditions, BP is the most stable phase of phosphorous, known as the α-phase, characterized by an orthorhombic honeycomb puckered crystal structure with the Cmca space group. On the other hand, the most stable phase of arsenic is its β-phase, known as gray arsenic (g-As), which has a rhombohedral buckled layered crystal structure with the R3m space group. In a wide range of compositions (y < 0.83), the arsenic phosphorous alloys form the α-phase, known as black arsenic phosphorous (b-As y P 1-y ) with a similar structure to BP. The project was aimed at the synthesis of BP and b-As y P 1-y with different compositions and at studying the structural evolution of these materials during intercalation with alkali metal (especially Li), and under high-pressure conditions. The main goals were to gain a better understanding of these processes and structural changes taking place under these conditions. In particular, the project was aimed at addressing whether such conditions could induce a structural transition between the α- and β-phases. For this, a series of systematic in-situ studies were conducted, including electrochemical lithium intercalation in an in-situ electrochemical cell, and high-pressure experiments in a diamond anvil cell (DAC). Overall, both types of experiments have shown that above a certain composition-dependent threshold level of intercalation or high pressure, the system undergoes phase segregation rather than phase transition. Specifically, the segregation of the excess arsenic was observed, and a single-phase system of b-As y P 1-y transformed into a two-phase system consisting of b-As y P 1-y and g-As, through the following process: 1∗(b-As y P 1-y ) → 1∗(b As y-δ P 1-y ) + δ∗(g-As). Also, the study showed that intercalation and high-pressure are two competing rather than synergistic processes causing at least a partial cancelation of these two factors

36 MATERIALS SCIENCE↗
DOE OSTI2025

Cage Balancing Enhances Optoelectronic and Lasing Performance in Stable Quasi-2D Tin Iodide Perovskites

Two-dimensional (2D) tin halide perovskites are highly tunable and low-toxicity semiconductors, promising for next-generation optoelectronics. However, achieving air stability and excellent photophysical properties simultaneously necessitates deliberate structure tuning using organic spacer cations and A-site cations. Here, we report a series of new quasi-2D Ruddlesden–Popper tin halide perovskites using a fluorinated aromatic spacer cation, 4-fluorophenethylammonium (4FPEA), and systematically investigate the impacts of layer thickness, spacer cation, and A-site cation on the crystal structures and optical properties of (4FPEA) 2 (A) n−1 S n I 3n+1 . These 4FPEA-based 2D tin perovskites, further tuned by the A-cations, exhibit uniquely undistorted 180° out-of-plane Sn–I–Sn bond angles and low octahedral distortions compared to other quasi-2D perovskites and demonstrate prolonged air stability, excellent photophysics, and amplified spontaneous emission and lasing in exfoliated microflakes. A comprehensive survey of reported n = 2 lead and tin iodide perovskites reveals that all structures can be classified into three types (tilted, balanced, and buckled) based on the structural distortion parameters of their perovskite cages. Notably, (4FPEA) 2 (A)Sn 2 I 7 are among the handful of “balanced” n = 2 perovskites with minimal distortion and excellent optoelectronic performance. Furthermore, the structural insights and cage-balancing approach revealed herein motivate the deliberate design of quasi-2D perovskites through the synergy of the spacer and cage cations, further paving the way for high-performance optoelectronic applications of stable tin halide perovskites.

Cations↗
DOE OSTI2024

TEAMER: Results of Investigating Structural Design Concepts and Alternative Materials for a Wave Power System

Included here are materials from a study on the design of a three-body Wave Energy Converter (WEC) utilizing a heave plate, dual Power Take Offs (PTOs), and single point mooring. A material trade study has been conducted to evaluate the effects of introducing various metallic and fiber-reinforced polymer (FRP) elements to the design. The baseline design is C-Power's patented k2 Wave Power System (WPS). This Testing Expertise and Access for Marine Energy Research (TEAMER) Request for Technical Support (RFTS) 9 effort resulted in alternative designs of the WPS center member, the nacelle. The analysis resulting from this study will inform the design of a lightweight structure with lower manufacturing and operating costs that increases energy conversion and power-to-weight ratio of the device. The dataset contains several components: finite element analysis (FEA) data, hand calculations, and CAD models. FEA files includes those used for and generated by finite element simulations. Calculations include hand calculations performed using Microsoft Excel, which assess core laminate properties, buckling, and other structural aspects in accordance with risk management DNV-RP-C201 standards. CAD materials include Solidworks files for parts, assemblies, and drawings of the evaluated models.

16 TIDAL AND WAVE POWER↗
DOE OSTI2025

Development and assessment of hierarchical multi-reward reinforcement learning based potential for silicene with state-of-the-art models

We develop a new interatomic force field for Silicene, a 2D material with a buckled hexagonal lattice structure with high polymorphism. We introduce new parameterizations of a Tersoff model using a hierarchical multi-reward reinforcement learning (RL) methodology coupled with a continuous Monte Carlo Tree Search optimization. Our model significantly outperforms existing methods by enhancing the accuracy of predictions for the structural and thermodynamic properties of seven silicene polymorphs-including structure, energy, equation of state, elasticity, and phonon dispersion-when compared to established models. We further make a comprehensive comparison of the various models in predicting the mechanical and thermal properties of silicene. We trace the origin of the improved performance to the description of the angular dependence in the bond-order term, suggesting that modifying the angular terms in short-range models is essential to capture the structural diversity in low dimensional systems.

2D materials↗
DOE OSTI2023

Helfrich-Hurault elastic instabilities driven by geometrical frustration

Here, the Helfrich-Hurault (HH) elastic instability is a well-known mechanism behind patterns that form as a result of strain upon liquid crystal systems with periodic ground states. In the HH model, layered structures undulate and buckle in response to local, geometric incompatibilities in order to maintain the preferred layer spacing. Classic HH systems include cholesteric liquid crystals under electromagnetic field distortions and smectic liquid crystals under mechanical strains, where both materials are confined between rigid substrates. However, richer phenomena are observed when undulation instabilities occur in the presence of deformable interfaces and variable boundary conditions. Understanding how the HH instability is affected by deformable surfaces is imperative for applying the instability to a broader range of materials. In this review, the HH mechanism is reexamined and special focus is given to how the boundary conditions influence the response of lamellar systems to geometrical frustration. Lamellar liquid crystals confined within a spherical shell geometry are used as the model system. Made possible by the relatively recent advances in microfluidics within the past 15 years, liquid crystal shells are composed entirely of fluid interfaces and have boundary conditions that can be dynamically controlled at will. Past and recent work that exemplifies how topological constraints, molecular anchoring conditions, and boundary curvature can trigger the HH mechanism in liquid crystals with periodic ground states is examined. The review ends by identifying similar phenomena across a wide variety of materials, both biological and synthetic. The fact that the HH mechanism is a generic and often overlooked response of periodic materials to geometrical frustration is highlighted.

42 ENGINEERING↗