Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “structural alignment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Structural Alignment Sensor Feasibility Demonstration

A structural alignment sensor (SAS) was developed for use with large deployable antenna systems for contour measurement and/or active control. The SAS is a laser ranging system using frequency modulation and accurate phase measurement to determine distance. Work was done with a CO2 and HeNe laser. The capability of the SAS to measure antenna rib contours was studied over ranges of 50 meters to a resolution of 100 microns. Initial resolution data was taken with the CO2 system. This data shows that it will indeed meet the SAS requirements. The development of the HeNe system was initiated because it offers substantial improvement in size, weight, and power over the CO2 system. The final demonstration was made with the HeNe system and it too showed that the SAS requirements could be met with this alternate approach. The projection of these results to a conceptual design for a flight system and its application are described.

Anderson, R. H.↗
NASA NTRS1978

Structural alignment sensor

Comparative Michelson interferometers are discussed as well as the operating range potential of a structural alignment sensor (SAS) which requires only one laser mode. Schematics are presented for the distance measurement logic, the basic SAS system, the SAS optical layout, the coarse measurement signal processor, and the measured range resolution.

Davis, L.↗
NASA NTRS2001

Multiple Radially Aligned Plasmaspheric Structures as Evidence of Standing Hydromagnetic Waves: IMAGE EUV Observations and Forward Modeling

The IMAGE EUV imager has observed several instances where the outer plasmasphere is populated by multiple radially aligned structures resembling "plasmaspheric fingers". The observation of these plasmaspheric structures suggests the presence of an azimuthal standing hydromagnetic wave mode. Eiganmodes appear to explain finger-like. nearly radial density structures that sometimes divide into two structures with increasing radial distance. The implication is of boundaries at fixed local times, which results in a widening "box" in which standing waves are developed. The structures also suggest a single driving frequency for the source of the waves. We present EUV observations of plasmaspheric fingers observed on August 2000 as well as plasmaspheric modeling of azimuthal wave modes in an effort to quantify the origin of these observed structures

Gallagher, D. L.↗
NASA NTRS1990

A self-consistent two-dimensional resistive fluid theory of field-aligned potential structures including charge separation and magnetic and velocity shear

A self-consistent two-fluid theory that includes the magnetic field and shear patterns is developed to model stationary electrostatic structures with field-aligned potential drops. Shear flow is also included in the theory since this seems to be a prominent feature of the structures of interest. In addition, Ohmic dissipation, a Hall term, and pressure gradients in a generalized Ohm's law, modified for cases without quasi-neutrality, are included. In the analytic theory, the electrostatic force is balanced by field-aligned pressure gradients (i.e., thermal effects in the direction of the magnetic field) and by pressure gradients and magnetic stresses in the perpendicular direction. Within this theory, simple examples of applications are presented to demonstrate the kind of solutions resulting from the model. The results show how the effects of charge separation and shear in the magnetic field and the velocity can be combined to form self-consistent structures such as are found to exist above the aurora, suggested also in association with solar flares.

Hesse, Michael↗
NASA NTRS1986

The dynamic behavior of plasmas observed near geosynchronous orbit

The behavior of plasmas observed by the ATS-6, ATS-5, and SCATHA spacecraft in the vicinity of synchronous orbit in the earth's magnetosphere is investigated. Two predominant features noted are the sudden appearance of injections, and the presence of marked magnetic field-aligned structure. Injections are geosynchronous manifestations of the global acceleration process producing the aurora. Field-aligned fluxes can be as much as two order of magnitude larger than perpendicular fluxes, and ions and electrons often display different field-aligned structure which changes with energy, suggesting field-aligned acceleration processes. Other observed phenomena include particle and field wave activity, and various kinds of plasma heating. Spacecraft charging events illustrate the effects of the hot magnetospheric plasma on material objects.

Mcilwain, C. E.↗
NASA NTRS1991

Quick-Connect/Disconnect Joint For Truss Structures

Simple connector used for temporary structures and pipes. Truss connector joins and aligns structural members. Consists of two sections, one flanged and other with mating internal groove. When flanged half inserted in groove, moves lever of trigger mechanism upward. Cone then shoots into grooved half. Attached without tools in less than 2 seconds and taken apart just as quickly and easily. Developed for assembling structures in outer space, also useful for temporary terrestrial structures like scaffolds and portable bleachers. With modifications, used to join sections of pipelines carrying liquids or gases.

Sprague, Benny B.↗
NASA NTRS1983

Control of large thermal distortions in a cryogenic wind tunnel

The National Transonic Facility (NTF) is a research wind tunnel capable of operation at temperatures down to 89K (160 R) and pressures up to 900,000 Pa (9 atmospheres) to achieve Reynolds numbers approaching 120,000,000. Wide temperature excursions combined with the precise alignment requirements of the tunnel aerodynamic surfaces imposed constraints on the mechanisms supporting the internal structures of the tunnel. The material selections suitable for this application were also limited. A general design philosophy of utilizing a single fixed point for each linear degree of freedom and guiding the expansion as required was adopted. These support systems allow thermal expansion to take place in a manner that minimizes the development of thermally induced stresses while maintaining structural alignment and resisting high aerodynamic loads. Typical of the support mechanisms are the preload brackets used in the fan shroud system and the Watts linkage used to support the upstream nacelle. The design of these mechanisms along with the basic design requirements and the constraints imposed by the tunnel system are discussed.

Gustafson, J. C.↗
NASA NTRS1993

The vertical disk structure of the edge-on spiral galaxy NGC 3079

NGC 3079 is an edge-on SB(s)c galaxy at a redshift of 1225 km/s relative to the Local Group. Earlier researchers found a spectacular 'figure-eight' radio structure aligned along the minor axis of the galaxy, centered on the nucleus, and extending 3 kpc above and below the plane. The geometry of this structure and the evidence of unusually high nuclear gas velocities suggest that a wind-type outflow from the nucleus is taking place. The disk of NGC 3079 is also remarkable: it is extremely rich in H 2 regions and is the only unambiguous example of a galaxy outside M31 and our own Galaxy to exhibit 'Heiles-like' shells. Other researchers have also identified a nebulosity with a ragged X-shaped morphology formed by a system of lumpy filaments with individual lengths of 3 - 5 kpc. They suggest that this material is ambient halo gas entrained into the boundary layers of the nuclear outflow. The complex structure of the line emission in NGC 3079 makes this object an ideal target for an imaging spectroscopic study. The present paper reports the preliminary results of such a study.

Veilleux, S.↗
NASA NTRS1983

Latitudinal and field-aligned cosmic ray gradients 2 to 5 AU Voyagers 1 and 2 and IMP 8

Results are presented showing that the contemporary picture of a relatively small heliocentric radial gradient is generally correct. They emphasize that such a gradient should really be thought of in terms of field-aligned structures since the cosmic ray populations tend to 'corotate' locally with the interplanetary field structure. Nonuniform latitudinal gradients of approximately 2 to 5 percent/deg in structures lasting 10 to 30 days are identified unambiguously. Additional evidence is seen for somewhat smaller latitudinal gradients often north to south and probably mixed with small field-aligned gradients of less than 1 percent/AU that persist for several solar rotations. It is suggested that these smallest ephemeral latitudinal gradients manifest themselves by affecting the degree of irregularity in diurnal variations of high latitude neutron monitors.

Roelof, E. C.↗
NASA NTRS2023

Anisotropic Mach Cone Aligned Mesh Adaptation for Low Boom Simulations

An automated off-body Mach cone aligned structured curvilinear grid generation procedure is presented for near-field computational fluid dynamics simulations. This procedure combines output-based indicators and mesh redistribution to perform anisotropic mesh adaptation while maintaining Mach cone alignment. Automation is achieved through a novel direction-based adaptation indicator formulation. The adaptation procedure is demonstrated on the JAXA Wing Body geometry and X-59 C608 demonstrator model from the Second and Third AIAA Sonic Boom Prediction Workshops, respectively. It is demonstrated that anisotropic mesh adaptation may result in a greater than fifty percent reduction in resource usage required to achieve the same level of accuracy as uniform and user constructed Mach cone aligned grids for near-field pressure signatures, ground-level overpressure signatures, and loudness metrics.

CST↗
NASA NTRS2023

Anisotropic Mach Cone Aligned Mesh Adaptation for Low Boom Simulations

An automated off-body Mach cone aligned structured curvilinear grid generation procedure is presented for near-field computational fluid dynamics simulations. This procedure combines output-based indicators and mesh redistribution to perform anisotropic mesh adaptation while maintaining Mach cone alignment. Automation is achieved through a novel direction-based adaptation indicator formulation. The adaptation procedure is demonstrated on the JAXA Wing Body geometry and X-59 C608 demonstrator model from the Second and Third AIAA Sonic Boom Prediction Workshops, respectively. It is demonstrated that anisotropic mesh adaptation may result in a greater than fifty percent reduction in resource usage required to achieve the same level of accuracy as uniform and user constructed Mach cone aligned grids for near-field pressure signatures, ground-level overpressure signatures, and loudness metrics.

CST↗
NASA NTRS1987

Filamentary structures in the magnetotail lobes

The observations of plasmas which may be the source population for polar cap arcs are reported. This population consists of energetic plasma contained within filamentary structures aligned approximately parallel to the XZ plane. Using a combination of plasma, particle, and magnetic field data for several events, it is established that the filaments have their origin in the plasma sheet or its adjacent boundary layer, and that the structures protrude into the lobe region. In a number of cases, a correlation between the convection pattern and the IMF B(Z) can be inferred. This is in agreement with the observed characteristics of polar cap arcs, observations of which are correlated with a northward directed IMF. The presence of field-aligned currents suggests that field-aligned acceleration may occur between the observing satellite and earth.

Huang, C. Y.↗
NASA NTRS2016

Double Sided Si(Ge)/Sapphire/III-Nitride Hybrid Structure

One aspect of the present invention is a double sided hybrid crystal structure including a trigonal Sapphire wafer containing a (0001) C-plane and having front and rear sides. The Sapphire wafer is substantially transparent to light in the visible and infrared spectra, and also provides insulation with respect to electromagnetic radio frequency noise. A layer of crystalline Si material having a cubic diamond structure aligned with the cubic <111> direction on the (0001) C-plane and strained as rhombohedron to thereby enable continuous integration of a selected (SiGe) device onto the rear side of the Sapphire wafer. The double sided hybrid crystal structure further includes an integrated III-Nitride crystalline layer on the front side of the Sapphire wafer that enables continuous integration of a selected III-Nitride device on the front side of the Sapphire wafer.

Park, Yeonjoon↗
NASA NTRS2017

Method of Fabricating Double Sided Si(Ge)/Sapphire/III-Nitride Hybrid Structure

One aspect of the present invention is a double sided hybrid crystal structure including a trigonal Sapphire wafer containing a (0001) C-plane and having front and rear sides. The Sapphire wafer is substantially transparent to light in the visible and infrared spectra, and also provides insulation with respect to electromagnetic radio frequency noise. A layer of crystalline Si material having a cubic diamond structure aligned with the cubic <111> direction on the (0001) C-plane and strained as rhombohedron to thereby enable continuous integration of a selected (SiGe) device onto the rear side of the Sapphire wafer. The double sided hybrid crystal structure further includes an integrated III-Nitride crystalline layer on the front side of the Sapphire wafer that enables continuous integration of a selected III-Nitride device on the front side of the Sapphire wafer.

Park, Yeonjoon↗
NASA NTRS1999

Electrical Field Effects in Phthalocyanine Film Growth by Vapor Deposition

Phthalocyanine, an organic material, is a very good candidate for non-linear optical application, such as high-speed switching and optical storage devices. Phthalocyanine films have been synthesized by vapor deposition on quartz substrates. Some substrates were coated with a very thin gold film for introducing electrical field. These films have been characterized by surface morphology, material structure, chemical and thermal stability, non-linear optical parameters, and electrical behaviors. The films have excellent chemical and optical stability. However, the surface of these films grown without electrical field shows flower-like morphology. When films are deposited under an electrical field ( an aligned structure is revealed on the surface. A comparison of the optical and electrical properties and the growth mechanism for these films grown with and without an electrical field will be discussed.

Banks, Curtis E.↗
NASA NTRS1992

Multiple jets from the young star IRAS 21334 + 5039

The source IRAS 21334 + 5039, a young stellar object (YSO) with broad CO outflow velocity profiles, was imaged in the 1-2 micron region with broad-band J, H, and K filters, and with a Fabry-Perot set to the molecular hydorgen v = 1-0 S(1) line, the hydrogen Br-gamma recombination line, and the neighboring continua. At 2 microns the source has an elongated continuum emission structure centered on the star. The structure has very blue tips, with a weak VLA 6 cm continuum source coincident with one of them. Strong molecular hydrogen emission appears as bow-shaped arcs oriented along an axis perpendicular to the continuum emission, and as a weaker structure aligned with it. Both the continuum and the molecular hydrogen emission are most likely produced by jets, possibly emanating in multiple directions from the central source at large angles to each other. While jets are a common feature of young stars, this source provides solid evidence for multiple jet structures.

Smith, Howard A.↗
NASA NTRS1977

Directionally solidified ceramic eutectics

The aligned structures which result from the directional solidification (DS) of ceramic eutectics are of interest because of their potential for use in electronic devices and as structural materials. Techniques for growing DS ceramic eutectics are briefly discussed. The principles and controlling parameters of DS eutectic growth are described. The criteria for plane-front growth and the effect of growth rate on interlamellar or interfiber spacing are discussed. Examples of the effect of growth parameters on the alignment of the microstructure are given. Examples of the mechanical properties of directionally solidified oxide-oxide ceramics are also cited.

Ashbrook, R. L.↗