Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “strength”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2006

New Accurate Oscillator Strengths and Electron Excitation Collision Strengths for N1

The nonorthogonal orbitals technique in a multiconfiguration Hartree-Fock approach is used to calculate oscillator strengths and transition probabilities of N(I) lines. The relativistic effects are allowed by means of Breit-Pauli operators. The length and velocity forms of oscillator strengths show good agreement for most transitions. The B-spline R-matrix with pseudostates approach has been used to calculate electron excitation collision strengths and rates. The nonorthogonal orbitals are used for an accurate description of both target wave functions and the R-matrix basis functions. The 24 spectroscopic bound and autoionizing states together with 15 pseudostates are included in the close-coupling expansion. The collision strengths for transitions between fine-structure levels are calculated by transforming the LS-coupled K-matrices to K-matrices in an intermediate coupling scheme. Thermally averaged collision strengths have been determined by integrating collision strength over a Maxwellian distribution of electron energies over a temperature range suitable for the modeling of astrophysical plasmas. The oscillator strengths and thermally averaged collision strengths are presented for transitions between the fine-structure levels of the 2s(sup 2)p(sup 3) (sup 4)S(sup 0), (sup 2)D(sup 0), (sup 2)P(sup 0), 2s2p(sup 4) (sup 4)P, 2s(sup 2)2p(sup 2)3s (sup 4)P, and (sup 2)P terms and from these levels to the levels of the 2s(sup 2)2p(sup 2)3p (sup 2)S(sup 0), (sup 4)D(sup 0), (sup 4)P(sup 0), (sup 4)S(sup 0), (sup 2)D(sup 0), (sup 2)P(sup 0),2s(sup 2)2p(sup 2)3s(sup 2)D, 2s(sup 2)2p(sup 2)4s(sup 4)P, (sup 2)P, 2s(sup 2)2p(sup 2)3d(sup 2)P, (sup 4)F,(sup 2)F,(sup 4)P, (sup 4)D, and (sup 2)D terms. Thermally averaged collision strengths are tabulated over a temperature range from 500 to 50,000 K.

Tayal, S. S.↗
NASA NTRS1993

A comparison of hand grasp breakaway strengths and bare-handed grip strengths of the astronauts, SML 3 test subjects, and the subjects from the general population

Astronauts have the task of retrieving and deploying satellites and handling massive objects in a around the payload bay. Concerns were raised that manual handling of such massive objects might induce loads to the shuttle suits exceeding the design-certified loads. The Crew and Thermal Division of NASA JSC simulated the satellite handling tasks (Satellite Manload Tests 1 and 3) and determined the maximum possible load that a suited member could impart onto the suit. In addition, the tests revealed that the load to the suit by an astronaut could be calculated from the astronaut's maximum hand grasp breakaway strength. Thus, this study was conducted to document that hand grasp breakaway strengths of the astronauts who were scheduled to perform EVA during the upcoming missions. In addition, this study verified whether the SML 3 test results were sufficient for documenting the maximum possible load. An attempt was made to predict grasp strength from grip strength and hand anthropometry. Based on the results from this study, the SML 3 test results were deemed sufficient to document the maximum possible load on the suit. Finally, prediction of grasp strength from grip strength was not as accurate as expected. Hence, it was recommended that grasp strength be collected from the astronauts in order to obtain accurate load estimation.

Rajulu, Sudhakar L.↗
NASA NTRS2013

Notched Strength Allowables and Inplane Shear Strength of AS4/VRM-34 Textile Laminates

Notched and unnotched strength allowables were developed for a textile composite to provide input data to analytical structural models based on the Pultruded Rod Stiffened Efficient Unitized Structure (PRSEUS) concept. Filled-hole tensile strength, filled-hole compressive strength, and inplane shear strength along stitch lines have been measured. The material system evaluated in this study is based on warp-knitted preforms of AS4 carbon fibers and VRM-34 epoxy resin, which have been processed via resin infusion and oven curing. All specimens were tested in as-fabricated (dry) condition. Filled-hole strengths were evaluated with and without through-thickness stitching. The effects of scaling on filled-hole tensile strength were evaluated by testing specimens in two widths, but with identical width / hole-diameter ratios. Inplane shear specimens were stitched in two configurations, and two specimen thicknesses were tested for each stitch configuration.

Grenoble, Ray W.↗
NASA NTRS1983

Oscillator strengths and collision strengths for S II

Calculations are presented of the collision strengths for electron impact excitation of S II from the ground 3s(2)3p(3)(4)S0 state to excited states 3s3p(4)(4)p, 3s(2(3p(2)4s(4)P, and 3s(2)3p(2)3d(4)P. The collision strengths are calculated in a close-coupling approximate ion for the energy range up to 10 to the 6th K. In addition, oscillator strengths are given for these transitions, as well as for some UV lines which have lower states 3s(2)3p(3)(2)D(O) and 3s(2)3p(3)(2)P(0). The calculation of the collision strengths involves the use of configuration interaction target wave functions which give oscillator strengths accurate to 30 percent in most cases.

Ho, Y. K.↗
NASA NTRS1984

Oscillator strengths and collision strengths for S III

The present calculation, in a close-coupled approximation for the energy range up to 1,000,000 K, yields collision strengths for the electron impact excitation of S III from the ground 3p2 3P state to the excited states 3s3p3 3D0, 3P0, 3S0, 3d 3D0, 3P0, and 4s 3P0. Also obtained are those transitions' oscillator strengths, and strengths for others involving 3p2 1D and 1S. Configuration-interaction target wave functions yielding oscillator strengths that are accurate to 20 percent are used in collision strength calculations.

Ho, Y. K.↗
NASA NTRS1938

The Crinkling Strength and the Bending Strength of Round Aircraft Tubing

The upper limit of the column strength of structural members composed of thin material is the maximum axial stress such members can carry when short enough to fail locally, by crinkling. This stress is a function of the mechanical properties of the material and of the geometrical shape of the cross section. The bending strength, as measured by the modulus of rupture, of structural members is also a function of these same variables. Tests were made of round tubes of chromium-molybdenum steel and of duralumin to determine the crinkling strengths and the bending strengths in terms of the specified yield strength and the ratio of diameter to thickness. Empirical formulas are given relating these quantities.

Osgood, William R↗
NASA NTRS1977

Line strengths, collision strengths and excitation rates for multiply-charged silicon ions

In the present paper, the line strengths, collision strengths, and rate coefficients are calculated for a variety of transitions in multiply charged silicon ions from Si(VI) to Si(XIV). The line strengths are obtained by using Clementi wave functions for the ground-state configuration, and excited-state wave functions generated by a semiempirical method. The collision strengths are calculated in an LS coupling scheme in the distorted-wave approximation, neglecting exchange except for the helium-like transitions. These results are then integrated over a Maxwellian velocity distribution function to yield rate coefficients. The rates are presented graphically and also in terms of a two-parameter fit.

Davis, J.↗
NASA NTRS1981

Oscillator strengths and collision strengths for S v

Observations of the optical extreme-ultraviolet spectrum of the Jupiter planetary system during the Voyager space mission revealed bright emission lines of some sulfur ions. The spectra of the torus at the orbit of Io are likely to contain S V lines. The described investigation provides oscillator strengths and collision strengths for the first four UV lines. The collision strengths from the ground state to four other excited states are also obtained. Use is made of a two-state calculation which is checked for convergence for some transitions by employing a three-state or a four-state approximation. Target wave functions for S V are calculated so that the oscillator strengths calculated in dipole length and dipole velocity approximations agree within 5%.

Van Wyngaarden, W. L.↗
NASA NTRS1990

Steady-state and transient Zener parameters in viscoplasticity: Drag strength versus yield strength

A hypothesis is put forth which enables the viscoplastician to formulate a theory of viscoplasticity that reduces, in closed form, to the classical theory of creep. This hypothesis is applied to a variety of drag and yield strength models. Because of two theoretical restrictions that are a consequence of this hypothesis, three different yield strength models and one drag strength model are shown to be theoretically admissible. One of these yield strength models is selected as being the most appropriate representation for isotropic hardening.

Freed, A. D.↗
NASA NTRS1999

Elevated-Temperature "Ultra" Fast Fracture Strength of Advanced Ceramics: An Approach to Elevated-Temperature "Inert" Strength

The determination of "ultra" fast fracture strengths of five silicon nitride ceramics at elevated temperatures has been made by using constant stress-rate ("dynamic fatigue") testing with a series of "ultra" fast test rates. The test material included four monolithic and one SiC whisker-reinforced composite silicon nitrides. Of the five test materials, four silicon nitrides exhibited the elevated -temperature strengths that approaches their respective room-temperature strengths at an "ultra" fast test rate of 3.3 x 10(exp 4) MPa/s. This implies that slow cracks growth responsible for elevated-temperature failure can be eliminated or minimized by using the "ultra" fast test rate. These ongoing experimental results have shed light on laying a theoretical and practical foundation on the concept and definition of elevated-temperature "inert" strength behavior of advanced ceramics.

Choi, S. R.↗
NASA NTRS2011

Comparison of Open-Hole Compression Strength and Compression After Impact Strength on Carbon Fiber/Epoxy Laminates for the Ares I Composite Interstage

Notched (open hole) composite laminates were tested in compression. The effect on strength of various sizes of through holes was examined. Results were compared to the average stress criterion model. Additionally, laminated sandwich structures were damaged from low-velocity impact with various impact energy levels and different impactor geometries. The compression strength relative to damage size was compared to the notched compression result strength. Open-hole compression strength was found to provide a reasonable bound on compression after impact.

Hodge, Andrew J.↗
NASA NTRS1985

Oscillator strengths and collision strengths for neutral sulfur

Configuration-interaction target wave functions are used in the present calculation of collision strengths, for electron impact excitation of neutral sulfur from the group 3p4 3P state to excited states 3p3 4s 3S0, 3p3(4S0)3d 3D0, and 3p3 4s 3P0, in a close coupling approximation for the energy range up to 1,000,000 K. Configuration-interaction target wave functions are used in the calculation of collision strengths, and oscillator strengths for various triplet transitions are reported together with transitions between 3p4 1D and 3p4 1S and other singlet-excited states.

Ho, Y. K.↗
NASA NTRS1982

Oscillator strengths and collision strengths for some ions of oxygen and sulphur

Collision strengths for electron impact excitation of the O II, O III, S II and S III for some transitions in the ultraviolet of the type ns(sup 2) np(sup q) yields ns np(sup q +1), ns(sup 2) np(sup q) yields ns(sup 2) np(sup q-1) (n+1)s and 3s2 3p(sup q) yields 352 3p(sup q -1) 3d are calculated in a close coupling approximation for an energy rate up to one million K. Configuration interaction target wave functions which give oscillator strengths accurate to 10% for O II and O III, and 20-30% for S II and S III, are used in the expansion. Accurate knowledge of the electron impact excitation cross sections is particularly significant for a proper interpretation of the combined ultraviolet observations of the Voyager UVS and IUE results on properties of the Io plasma torus.

Ho, Y. K.↗
NASA NTRS1989

Fatigue strength reduction model: RANDOM3 and RANDOM4 user manual. Appendix 2: Development of advanced methodologies for probabilistic constitutive relationships of material strength models

FORTRAN programs RANDOM3 and RANDOM4 are documented in the form of a user's manual. Both programs are based on fatigue strength reduction, using a probabilistic constitutive model. The programs predict the random lifetime of an engine component to reach a given fatigue strength. The theoretical backgrounds, input data instructions, and sample problems illustrating the use of the programs are included.

Boyce, Lola↗