Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “stochastic approaches”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Rate of excited-nucleus fission within a multidimensional stochastic approach

A stochastic approach to describing the dynamics of the nuclear-fission process is applied to study the effect of the number of dimensions on the fission rate within the dynamical model used. The time dependence of the fission rate is calculated on the basis of a multidimensional Langevin equation without taking into account particle evaporation. The one-, two-, and three-dimensional cases are considered for the example of the 'c, h, {alpha}' parametrization of nuclear-surface shapes. The calculations are performed for a large number of compound nuclei whose parameter Z{sup 2}/A falls within the range 20 {<=} Z{sup 2}/A {<=} 40. The stationary level of the fission rate is found to increase considerably upon going over from the one- to the three-dimensional case. This increase is especially pronounced for light fissile nuclei in the vicinity of the Businaro-Gallone point. Also, the stationary fission-rate level obtained from our dynamical simulation is compared with its counterpart calculated by the Kramers formula generalized to the multidimensional case.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A stochastic approach to uncertainty in the equations of MHD kinematics

The magnetohydrodynamic (MHD) kinematics model describes the electromagnetic behavior of an electrically conducting fluid when its hydrodynamic properties are assumed to be known. In particular, the MHD kinematics equations can be used to simulate the magnetic field induced by a given velocity field. While prescribing the velocity field leads to a simpler model than the fully coupled MHD system, this may introduce some epistemic uncertainty into the model. If the velocity of a physical system is not known with certainty, the magnetic field obtained from the model may not be reflective of the magnetic field seen in experiments. Additionally, uncertainty in physical parameters such as the magnetic resistivity may affect the reliability of predictions obtained from this model. By modeling the velocity and the resistivity as random variables in the MHD kinematics model, we seek to quantify the effects of uncertainty in these fields on the induced magnetic field. We develop stochastic expressions for these quantities and investigate their impact within a finite element discretization of the kinematics equations. We obtain mean and variance data through Monte Carlo simulation for several test problems. Toward this end, we develop and test an efficient block preconditioner for the linear systems arising from the discretized equations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Sensitivity of Base-Isolated Systems to Ground Motion Characteristics: A Stochastic Approach

Base isolators dissipate energy through their nonlinear behavior when subjected to earthquake-induced loads. A widely used base isolation system for structures involves installing lead-rubber bearings (LRB) at the foundation level. The force-deformation behavior of LRB isolators can be modeled by a bilinear hysteretic model. This paper investigates the effects of ground motion characteristics on the response of bilinear hysteretic oscillators by using a stochastic approach. Ground shaking is characterized by its power spectral density function (PSDF), which includes corner frequency, seismic moment, moment magnitude, and site effects as its parameters. The PSDF of the oscillator response is calculated by using the equivalent-linearization techniques of random vibration theory for hysteretic nonlinear systems. Knowing the PSDF of the response, we can calculate the mean square and the expected maximum response spectra for a range of natural periods and ductility values. The results show that moment magnitude is a critical factor determining the response. Site effects do not seem to have a significant influence.

58 GEOSCIENCES↗

Poisson-Vlasov in a strong magnetic field: A stochastic solution approach

Stochastic solutions are obtained for the Maxwell-Vlasov equation in the approximation where magnetic field fluctuations are neglected and the electrostatic potential is used to compute the electric field. This is a reasonable approximation for plasmas in a strong external magnetic field. Both Fourier and configuration space solutions are constructed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A stochastic approach to the solution of magnetohydrodynamic equations

The construction of stochastic solutions is a powerful method to obtain localized solutions in configuration or Fourier space and for parallel computation with domain decomposition. Here a stochastic solution is obtained for the magnetohydrodynamics equations. Some details are given concerning the numerical implementation of the solution which is illustrated by an example of generation of long-range magnetic fields by a velocity source.

97 MATHEMATICS AND COMPUTING↗

A one-dimensional stochastic approach to the study of cyclic voltammetry with adsorption effects

In this study, a one-dimensional stochastic model based on the random walk approach is used to simulate cyclic voltammetry. The model takes into account mass transport, kinetics of the redox reactions, adsorption effects and changes in the morphology of the electrode. The model is shown to display the expected behavior. Furthermore, the model shows consistent qualitative agreement with a finite difference solution. This approach allows for an understanding of phenomena on a microscopic level and may be useful for analyzing qualitative features observed in experimentally recorded signals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

New stochastic approach to cumulative weak lensing

We study the weak gravitational lensing effects caused by a stochastic distribution of dark matter halos. We develop a simple approach to calculate the magnification probability distribution function which allows us to easily compute the magnitude bias and dispersion for an arbitrary data sample and a given universe model. As an application we consider the effects of single-mass large-scale cosmic inhomogeneities (M{approx}10{sup 15}h{sup -1}M{sub {center_dot}}) to the SNe magnitude-redshift relation, and conclude that such structures could bias the PDF enough to affect the extraction of cosmological parameters from the limited size of present-day SNe data samples. We also release turboGL[turboGL is available at: http://www.turbogl.org.], a simple and very fast (< or approx. 1 s) Mathematica code based on the method here presented.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An average stochastic approach to two-body dissipation in finite fermion systems

We present average stochastic time-dependent Hartree–Fock (ASTDHF) as a theory for efficient handling of incoherent dynamical correlations in finite fermion systems at fully quantum-mechanical level. The basic time evolution is given by time-dependent mean-field theory. The two-body collisions beyond mean-field propagation are evaluated stochastically in an incoherent ensemble of mean-field states as was done in the previously developed STDHF. The new, and time saving, feature in ASTDHF is that it employs one common mean field throughout the whole ensemble. A detailed presentation of ASTDHF is given and extensive comparison with STDHF and other approaches to dissipation are discussed. ASTDHF is found to be a very efficient approach for well bound systems where mean-field fluctuations remain small.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

TOUGH2-seed: A coupled fluid flow and mechanical-stochastic approach to model injection-induced seismicity

Understanding the injection-induced triggering mechanism is a fundamental step towards controlling the seismicity generated by deep underground exploitation. Here we propose a modeling approach based on coupling the TOUGH2 simulator with a geomechanical-stochastic model. Additionally, the hydro-mechanical-stochastic model provides a good representation of different mechanisms influencing each other during and after the injection phase. Each mechanism affects the induced seismicity in a different way and at different times during the reservoir stimulation, confirming that a complex interaction is in place, and that more sophisticated and physics-based approaches coupled with statistical model are required to explain such a complex interaction. In addition to previous statistical and hybrid models, our approach accounts for a full 3D formulation of both stresses and fluid flow, further including all the TOUGH2 capabilities. Furthermore, it includes interactions between triggered seismic events through calculation of static stress transfer. Here, in this work, we present the main capabilities of TOUGH2-SEED and apply the model to the Basel EGS case, successfully reproducing the injection pressure as well as the evolution of the seismicity.

58 GEOSCIENCES↗

Stochastic Approaches for Calculating and Aggregating Detection Probabilities for Nuclear Material Diversion

The authors built and tested a stochastic simulation to estimate achieved detection probabilities (DPs) on a stratum basis, over a tailorable range of diverted amounts from 0 to 2 significant quantities (SQ), using typical International Atomic Energy Agency (IAEA) inspection data: i.e., SQ in stratum, number of items, number of gross/partial/bias defect measurements conducted, and realistic relative standard deviation (RSD) values for typical IAEA verification measurements. For bulk strata, the model calculates achieved DP at 0.01 SQ diversion increments; for item strata, the model calculates DP using the smallest realistic diversion increment (e.g., a plate, pin, or coupon). After successfully benchmarking against IAEA deterministic models, the simulation was used to test the sensitivity of DP to certain standard assumptions and selected input parameters. First, the equal defect assumption was tested; the results suggest significant complexity in the effectiveness of partial defect measurements. Next, the authors explored the sensitivity of DP to the assumed RSD of attribute tests. Then, the authors compared non-normal models for instrument performance (e.g., logistic, step, or arbitrary functions) to the typical results from a normal distribution (characterized by RSD). This last comparison was supplemented with experimentally derived performance data for an HM-5 gamma spectrometer. The HM-5 was used to make enrichment measurements on both LEU and HEU MTR fuel elements as plates were removed, and the results fit with logistic and step curves and applied in the simulation. These stochastic DP results were compared to DP estimates from a deterministic model assuming a normal curve and typical RSD, yielding insights that could improve effectiveness in the field. These early results illustrate the potential of stochastic models to better understand achieved DP and to improve safeguards effectiveness.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Discussion on “Saving Storage in Climate Ensembles: A Model-Based Stochastic Approach”

Abstract We thank the authors for this interesting paper that highlights important ideas and concepts for the future of climate model ensembles and their storage, as well as future uses of stochastic emulators. Stochastic emulators are particularly relevant because of the statistical nature of climate model ensembles, as discussed in previous work of the authors (Castruccio et al. in J Clim 32:8511–8522, 2019; Hu and Castruccio in J Clim 34:8409–8418, 2021). We thank the authors for sharing of some of their data with us in order to illustrate this discussion. In the following, in Sect. 1 we discuss alternative techniques currently used and studied, namely lossy compression and ideas emerging from the climate modeling community, that could feed the discussion on ensemble and storage. In that section, we also present numerical results of compression performed on the data shared by the authors. In Sect. 2, we discuss the current statistical model proposed by the authors and its context. We discuss other potential uses of stochastic emulators in climate and Earth modeling.

97 MATHEMATICS AND COMPUTING↗

Stochastic approach to flat direction during inflation

We revisit the time evolution of a flat and non-flat direction system during inflation. In order to take into account quantum noises in the analysis, we base on stochastic formalism and solve coupled Langevin equations numerically. We focus on a class of models in which tree-level Hubble-induced mass is not generated. Although the non-flat directions can block the growth of the flat direction's variance in principle, the blocking effects are suppressed by the effective masses of the non-flat directions. We find that the fate of the flat direction during inflation is determined by one-loop radiative corrections and non-renormalizable terms as usually considered, if we remove the zero-point fluctuation from the noise terms.

79 ASTRONOMY AND ASTROPHYSICS↗

Stochastic approach to correlations beyond the mean field with the Skyrme interaction

Large-scale calculation based on the multi-configuration Skyrme density functional theory is performed for the light N=Z even-even nucleus, {sup 12}C. Stochastic procedures and the imaginary-time evolution are utilized to prepare many Slater determinants. Each state is projected on eigenstates of parity and angular momentum. Then, performing the configuration mixing calculation with the Skyrme Hamiltonian, we obtain low-lying energy-eigenstates and their explicit wave functions. The generated wave functions are completely free from any assumption and symmetry restriction. Excitation spectra and transition probabilities are well reproduced, not only for the ground-state band, but for negative-parity excited states and the Hoyle state.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

SU-F-T-182: A Stochastic Approach to Daily QA Tolerances On Spot Properties for Proton Pencil Beam Scanning

Purpose: Proton pencil beam scanning is used clinically across the United States. There are no current guidelines on tolerances for daily QA specific to pencil beam scanning, specifically related to the individual spot properties (spot width). Using a stochastic method to determine tolerances has the potential to optimize tolerances on individual spots and decrease the number of false positive failures in daily QA. Individual and global spot tolerances were evaluated. Methods: As part of daily QA for proton pencil beam scanning, a field of 16 spots (corresponding to 8 energies) is measured using an array of ion chambers (Matrixx, IBA). Each individual spot is fit to two Gaussian functions (x,y). The spot width (σ) in × and y are recorded (32 parameters). Results from the daily QA were retrospectively analyzed for 100 days of data. The deviations of the spot widths were histogrammed and fit to a Gaussian function. The stochastic spot tolerance was taken to be the mean ± 3σ. Using these results, tolerances were developed and tested against known deviations in spot width. Results: The individual spot tolerances derived with the stochastic method decreased in 30/32 instances. Using the previous tolerances (± 20% width), the daily QA would have detected 0/20 days of the deviation. Using a tolerance of any 6 spots failing the stochastic tolerance, 18/20 days of the deviation would have been detected. Conclusion: Using a stochastic method we have been able to decrease daily tolerances on the spot widths for 30/32 spot widths measured. The stochastic tolerances can lead to detection of deviations that previously would have been picked up on monthly QA and missed by daily QA. This method could be easily extended for evaluation of other QA parameters in proton spot scanning.

60 APPLIED LIFE SCIENCES↗

Stochastic Approaches for Calculating and Aggregating Detection Probabilities for Nuclear Material Diversion

The goal of this project is to develop statistical methods and tools that can be used to rigorously calculate achieved DPs on individual material strata and then aggregate these to the facility and state levels. In particular, this project is evaluating the utility of stochastic ("Monte Carlo") methods as a potentially more powerful and flexible option to the analytical solutions traditionally employed by IAEA statisticians.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Barkhausen discontinuities and hysteresis of ferromagnetics: New stochastic approach

The magnetization of ferromagnetic material is considered as periodically inhomogeneous Markov process. The theory assumes both statistically independent and correlated Barkhausen discontinuities. The model, based on the chain evolution-type process theory, assumes that the domain structure of a ferromagnet passes successively the steps of: linear growing, exponential acceleration and domains annihilation to zero density at magnetic saturation. The solution of stochastic differential Kolmogorov equation enables the hysteresis loop calculus.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗