Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “spread spectrum communication”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2011

Quantum Spread Spectrum Communication

We show that communication of single-photon quantum states in a multi-user environment is improved by using spread spectrum communication techniques. We describe a framework for spreading, transmitting, despreading, and detecting single-photon spectral states that mimics conventional spread spectrum techniques. We show in the cases of inadvertent detection, unintentional interference, and multi-user management, that quantum spread spectrum communications may minimize receiver errors by managing quantum channel access.

99 GENERAL AND MISCELLANEOUS↗
NASA NTRS1972

A surface wave spread spectrum communication link.

This development has resulted in a fast lock-up, 8-MHz bandwidth, 8-KHz data rate, spread spectrum communication link breadboard that is implemented using surface wave devices as the primary signal generators and signal processing elements. It uses surface wave tapped delay lines (SWTDL's) in the transmitter to generate the signals and in the receiver to match filter detect them. The system also incorporates a re-entry delay line (circulating integrator) which increases the effective code length per data bit by eight-fold.

Fugit, B. R.↗
NASA NTRS1971

Spread spectrum communication link using surface wave devices

A fast lock-up, 8-MHz bandwidth 8,000 bit per second data rate spread spectrum communication link breadboard is described that is implemented using surface wave devices as the primary signal generators and signal processing elements. It uses surface wave tapped delay lines in the transmitter to generate the signals and in the receiver to detect them. The breadboard provides a measured processing gain for Gaussian noise of 31.5 dB which is within one dB of the theoretical optimum. This development demonstrates that spread spectrum receivers implemented with surface wave devices have sensitivities and complexities comparable to those of serial correlation receivers, but synchronization search times which are two to three orders of magnitude smaller.

Hunsinger, B. J.↗
NASA NTRS1985

Spread spectrum communications. Volume 1, 2 & 3

The design and operation of spread-spectrum (SS) communication systems are examined in an introductory text intended for graduate engineering students and practicing engineers. Chapters are devoted to an overview of SS systems, the historical origins of SS, basic concepts and system models, antijam communication systems, pseudonoise generators, coherent direct-sequence systems, noncoherent frequency-hopped systems, coherent and differentially coherent modulation techniques, pseudonoise acquisition and tracking in direct-sequence receivers, time and frequency synchronization of frequency-hopped receivers, low-probability-of-intercept communication, and multiple-access communication. Graphs, diagrams, and photographs are provided.

Simon, M. K.↗
DOE OSTI2016

Novel Maximum-based Timing Acquisition for Spread-Spectrum Communications

This paper proposes and analyzes a new packet detection and timing acquisition method for spread spectrum systems. The proposed method provides an enhancement over the typical thresholding techniques that have been proposed for direct sequence spread spectrum (DS-SS). The effective implementation of thresholding methods typically require accurate knowledge of the received signal-to-noise ratio (SNR), which is particularly difficult to estimate in spread spectrum systems. Instead, we propose a method which utilizes a consistency metric of the location of maximum samples at the output of a filter matched to the spread spectrum waveform to achieve acquisition, and does not require knowledge of the received SNR. Through theoretical study, we show that the proposed method offers a low probability of missed detection over a large range of SNR with a corresponding probability of false alarm far lower than other methods. Computer simulations that corroborate our theoretical results are also presented. Although our work here has been motivated by our previous study of a filter bank multicarrier spread-spectrum (FB-MC-SS) system, the proposed method is applicable to DS-SS systems as well.

99 GENERAL AND MISCELLANEOUS↗
NASA NTRS1979

Timing and frequency considerations in the worldwide testing of a spread spectrum communication system

During 1978 and 1979, an Air Force C-135 test aircraft was flown to various locations in the North and South Atlantic and Pacific Oceans for satellite communications experiments. A part of the equipment tested on the aircraft was the SEACOM spread spectrum modem. The SEACOM modem operated at X band frequency from the aircraft via the DSCS II satellite to a ground station. For data to be phased successfully, it was necessary to maintain independent time and frequency accuracy over relatively long periods of time (up to two weeks) on the aircraft and at the ground station. To achieve this goal, two Efratom atomic frequency standards were used. The performance of these frequency standards as used in the spread spectrum modem is discussed, including the effects of high relative velocity, synchronization and the effects of the frequency standards on data performance is discussed. The aircraft environment, which includes extremes of temperature, as well as long periods of shutdown followed by rapid warmup requirements, is also discussed.

Woodring, D. G.↗
DOE OSTI2017

Fault Tolerant Key Generation and Secure Spread Spectrum Communication

This study presents a secure information transmission system compromised of two main parts. The first component makes use of the principle of reciprocity in frequency-selective wireless channels to derive a pair of keys for two legitimate parties. The proposed key generation algorithm allows for two asynchronous transceivers to derive a pair of similar keys. Moreover, we apply a unique augmentation - called strongest path cancellation (SPC) - to the keys and have validated through simulation and real-world measurements that this technique significantly boosts the security level of the overall design. In the second part of the secure information transmission system, we introduce the concept of artificial noise to multi-carrier spread-spectrum (MC-SS) systems. The keys generated in the first part are used as spreading code sequences for MC-SS and artificial noise is added to further enhance the security of this communication setup. Two different attacks on our proposed system are evaluated. First, a passive adversary who follows the exact same steps as the legitimate users to detect confidential information is considered. In the second attack, we evaluate the design in presence of an adversary with significant blind detection capabilities.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2025

Multicarrier Spread Spectrum Communications With Noncontiguous Subcarrier Bands for HF Skywave Links

Existing high-frequency (HF) radio platforms offer robust performance against the volatile HF propagation channel. However, the growing traffic across the band contests the reliability of these systems. While techniques to mitigate the effects of narrowband interference have been thoroughly explored, they are insufficient against wideband interference or when the transmission band is occupied by numerous scattered users. To improve reliability in these congested channel conditions, we propose a filter-bank based multicarrier spread-spectrum waveform with noncontiguous subcarrier bands. Using noncontiguous subcarrier bands enables the system to at once leverage the robustness of a wideband system while retaining the frequency agility of a narrowband system. In this study, we modify a filter-bank transmitter structure to accommodate noncontiguous subcarrier bands and consider several immediate impacts of this change, such as elevated peak-to-average-power ratios (PAPRs). A receiver architecture to process the noncontiguous spread-spectrum signal is also introduced, along with details regarding wideband channel estimation. Finally, we develop efficient transmitter and receiver structures to support practical system implementations. We conclude by comparing the performance of contiguous and noncontiguous systems through both simulation and over-the-air testing. The results show that the noncontiguous system remains robust in typical HF channels while significantly outperforming the contiguous system in congested spectral conditions.

(PAPR↗
NASA NTRS1982

Error correction coding for frequency-hopping multiple-access spread spectrum communication systems

A communication system which would effect channel coding for frequency-hopped multiple-access is described. It is shown that in theory coding can increase the spectrum utilization efficiency of a system with mutual interference to 100 percent. Various coding strategies are discussed and some initial comparisons are given. Some of the problems associated with implementing the type of system described here are discussed.

Healy, T. J.↗
NASA NTRS1990

Spread spectrum mobile communication experiment using ETS-V satellite

The spread spectrum technique is attractive for application to mobile satellite communications, because of its random access capability, immunity to inter-system interference, and robustness to overloading. A novel direct sequence spread spectrum communication equipment is developed for land mobile satellite applications. The equipment is developed based on a matched filter technique to improve the initial acquisition performance. The data rate is 2.4 kilobits per sec. and the PN clock rate is 2.4552 mega-Hz. This equipment also has a function of measuring the multipath delay profile of land mobile satellite channel, making use of a correlation property of a PN code. This paper gives an outline of the equipment and the field test results with ETS-V satellite.

Ikegami, Tetsushi↗
DOE OSTI2019

Spread Spectrum Digital Communications Modeling in Electronic Warfare Modeling and Simulation Software

This artifact is an intern project poster. The subject matter is modeling spread spectrum digital communications in electronic warfare modeling and simulation software produced by National and Homeland Security. It contains images of communications coverage analysis from the software, link budget terms, and image depicting the Wireless Spectrum Communications (WSComm) underlay control channel (UCC), and an image of a filter bank multicarrier spread spectrum (FBMCSS) signal. INL National and Homeland Security Electronic Warfare Modeling and Simulation software (EWMSS) is capable of modeling several digital and analog signal types, but it does not currently support spread spectrum techniques such as filter bank multicarrier spread spectrum (FBMCSS). FBMCSS modeling requires "processing gain," which is not present in EWMSS' link budget. Wireless Spectrum Communications (WSComm) Underlay Control Channel (UCC), a product of INL, employs FBMCSS and is modeled in EWMSS for this project. This research shows that by manually accounting for FBMCSS processing gain, EWMSS calculates a link margin that is within 0.023 dB of a link margin in an existing WSComm link budget. These link margins were based on free space path loss, an ideal propagation model. EWMSS has the capability to include terrain and other sophisticated propagation models in its calculations, giving it the potential to provide realistic, location-specific models of WSComm UCC if processing gain is accounted for.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1995

Channel fading for mobile satellite communications using spread spectrum signaling and TDRSS

This paper will present some preliminary results from a propagation experiment which employed NASA's TDRSS and an 8 MHz chip rate spread spectrum signal. Channel fade statistics were measured and analyzed in 21 representative geographical locations covering urban/suburban, open plain, and forested areas. Cumulative distribution Functions (CDF's) of 12 individual locations are presented and classified based on location. Representative CDF's from each of these three types of terrain are summarized. These results are discussed, and the fade depths exceeded 10 percent of the time in three types of environments are tabulated. The spread spectrum fade statistics for tree-lined roads are compared with the Empirical Roadside Shadowing Model.

Jenkins, Jeffrey D.↗
DOE OSTI2013

Security of Classic PN-Spreading Codes for Hybrid DS/FH Spread-Spectrum Systems

Hybrid direct sequence/frequency hopping (DS/FH) spread-spectrum communication systems have recently received considerable interest in commercial applications in addition to their use in military communications because they accommodate high data rates with high link integrity, even in the presence of significant multipath effects and interfering signals. The security of hybrid DS/FH systems strongly depends on the choice of PN-spreading code employed. In this paper, we examine the security, in terms of unicity distance, of linear maximal-length, Gold, and Kasami PN-spreading codes for DS, FH, and hybrid DS/FH spread-spectrum systems without additional encryption methods. The unicity distance is a measure of the minimum amount of ciphertext required by an eavesdropper to uniquely determine the specific key used in a cryptosystem and hence break the cipher. Numerical results are presented to compare the security of the considered PN-spreading codes under known-ciphertext attacks.

direct sequence↗
NASA NTRS2001

Space-based Encoded Telemetry for Range Safety

This work involves the analysis of a communication system that uses the NASA Tracking and Data Relay Satellite/Space Network (TDRSS/SN) to provide range safety and flight termination system support for expendable launch vehicles and the space shuttle. We examined the high-alphabet scheme for flight termination, and considered an analogous digital system. We also considered the bit-rate needed for a flight termination system using the TDRSS system based on the received signal-to-noise ratio, and link margin. We found that a TDRSS spread-spectrum communication system operating in the vicinity of 150 bits/second could satisfy the requirements for flight termination.

Kozaitis, Sam↗
NASA NTRS2002

Space-Based Encoded Telemetry for Range Safety

This work involves the analysis of a communication system that uses the NASA Tracking and Data Relay Satellite/space Network (TDRSS/SN) to provide range safety and flight termination system support for expendable launch vehicles and the space shuttle. We examined the high-alphabet scheme for flight termination, and considered an analogous digital system. We also considered the bit-rate needed for a flight termination system using the TDRSS system based on the received signal-to-noise ratio, and link margin. We found that a TDRSS spread-spectrum communication system operating in the vicinity of 150 bits/second could satisfy the requirements for flight termination.

Kozaitis, Samuel P.↗
DOE OSTI2020

Communication device, spread-spectrum receiver, and related method using normalized matched filter for improving signal-to-noise ratio in harsh environments

A communication device, a method of operating a communication device, and a spread-spectrum receiver are disclosed. The method includes receiving an incoming RF signal, demodulating the incoming RF signal to generate a baseband signal, filtering the baseband signal with a normalized matched filter having filter characteristics matched to a pulse-shaping filter of the transmitter that generated the incoming RF signal, and extracting a received signal from a normalized output generated by the normalized matched filter. As a result, interferences and noise from harsh environments may be suppressed.

42 ENGINEERING↗