Calculation of functionals of matrices arising in solid state physics and quantum chemistry
Analytic function calculation of matrices in solid state physics and quantum chemistry
ANALYTIC FUNCTION↗
SEARCH · Engineering Papers
Results for “solid state chemistry”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Radiation-induced D/H Exchange Rate Constants in Aliphatics Embedded in Water Ice
Gas-phase and solid-state chemistry in low-temperature interstellar clouds and cores leads to a D/H enhancement in interstellar ices, which is eventually inherited by comets, meteorites, and even planetary satellites. Hence, the D/H ratio has been widely used as a tracer for the origins of extraterrestrial chemistry. However, the D/H ratio can also be influenced by cosmic rays, which are ubiquitous and can penetrate even dense interstellar molecular cores. The effects of such high-energy radiation on deuterium fractionation have not been studied in a quantitative manner. In this study, we present rate constants for radiation-induced D-to-H exchange for fully deuterated small (1–2 C) hydrocarbons embedded in H2O ice at 20 K and H-to-D exchange for the protiated forms of these molecules in D2O ice at 20 K. We observed larger rate constants for H-to-D exchange in the D2O ice versus D-to-H exchange in H2O ice, which we have attributed to the greater bond strength of C–D versus C–H. We find that the H-to-D exchange rate constants are smaller for protiated methane than ethane, in agreement with bond energies from the literature. We are unable to obtain rate constants for the unsaturated and reactive hydrocarbons ethylene and acetylene. Interpretation of the rate constants suggest that D/H exchange products are formed in abundance alongside radiolysis products. We discuss how our quantitative and qualitative data can be used to interpret the D/H ratios of aliphatic compounds observed throughout space.
Ice destruction↗
Interpretable Tree-Based and Graph Neural Network Approaches for Novel Solid State Electrolyte Design
All-solid-state batteries with Li metal anode can address the safety issues surrounding traditional Li-ion batteries as well as the demand for higher energy densities. However, the development of solid electrolytes simultaneously possessing high ionic conductivity and good chemical and electrochemical stabilities has proven to be a challenge. I will present our informatics approach to explore the Li compound space for promising solid electrolytes using high-throughput multi-property screening and interpretable machine learning. This is accomplished through the generation of a large database of battery-related materials properties of Li compounds. We use tree-based ensemble learning methods and graph neural network approaches to accurately learn relationships between crystal structures and corresponding thermodynamic and kinetic properties, with interpretability being a major focus. Our models give us the ability to enable rapid discovery and design of novel solid-state battery chemistries.
Materials discovery↗
Twinning, Epitaxy and Domain Switching in Ferroelastic Inclusion Compounds
Our research is in the area of solid-state organic chemistry, which lies at the interface between physical organic chemistry and materials science. We use crystalline solids as models to probe fundamental issues about physical processes, molecular interactions and chemical reactions that are important for fabrication, stabilization and application of technological materials. Much of our most recent work has focused on the phenomena of ferroelastic and ferroelectric domain switching, in which application of an external force or electric field to a crystal causes the molecules inside the crystal to reorient, in tandem, to a new orientational state. To better understand and control the domain switching process, we have designed and synthesized over twenty closely related, ferroelastic organic crystals. Our approach has been to use crystalline inclusion compounds, in which one molecule (the guest) is trapped within the crystalline framework of a second molecule (the host). By keeping the host constant and varying the proportions and kinds of guests, it has been possible to tailor these materials so that domain switching is rapid and reversible (which is desirable for high technology applications). Inclusion compounds therefore serve as powerful systems for understanding the specific molecular mechanisms that control domain switching.
Hollingsworth, Mark D.↗
A materials-informatics based study of solid electrolytes and protective coatings for Li batteries
All-solid-state batteries with Li metal anode can address the safety issues surrounding traditional Li-ion batteries as well as the demand for higher energy densities. However, the development of solid electrolytes and protective coatings simultaneously possessing high ionic conductivity and wide electrochemical stability has proven to be a challenge. Here, we present a data-driven approach to explore the Li compound space for promising solid electrolytes and coatings. This is accomplished through the generation of a large database of battery-related materials properties of Li compounds by computing Li+ migration barriers using bond-valence-based pair potentials, and stability windows using density functional theory energies. Using this database, we implement machine learning models that can accurately predict migration barriers and electrochemical stability windows for any new Li compound. Through feature engineering, we ensure that our models are both accurate and interpretable. We perform feature importance analysis on our models to highlight materials properties that can be tuned for future design of coatings/electrolytes. Our database and informatics approach provide a valuable tool for the rapid discovery of new solid-state battery chemistries.
Solid state batteries↗
Fundamentals of tribology at the atomic level
Tribology, the science and engineering of solid surfaces in moving contact, is a field that encompasses many disciplines: solid state physics, chemistry, materials science, and mechanical engineering. In spite of the practical importance and maturity of the field, the fundamental understanding of basic phenomena has only recently been attacked. An attempt to define some of these problems and indicate some profitable directions for future research is presented. There are three broad classifications: (1) fluid properties (compression, rheology, additives and particulates); (2) material properties of the solids (deformation, defect formation and energy loss mechanisms); and (3) interfacial properties (adhesion, friction chemical reactions, and boundary films). Research in the categories has traditionally been approached by considering macroscopic material properties. Recent activity has shown that some issues can be approached at the atomic level: the atoms in the materials can be manipulated both experimentally and theoretically, and can produce results related to macroscopic phenomena.
Ferrante, John↗
Research on the physics of solid materials semiannual status report no. 11, 1 may - 31 oct. 1964
Environmental effects on electric properties of n-p-n silicon transistors
METALLURGY↗
The formation of peroxonitrites and oxygen on Mars
When Martian regolith samples are moistened with water, a strong oxidant and oxygen gas are released. The many possible oxidants which have been suggested as present, including superoxide (O2(-)) hydrogen peroxide (H2O2(-)), and manganese (IV) oxide (MnO2), as well as peroxonitrite (ONOO(-)), can be distinguished by their ability to account for the numerous observations of the Viking Labelled Release (LR) and Gas Exchange (GEX) experiments. The magnitudes, kinetics, and heat labilities of the LR experiments and the magnitudes and heat labilities of the GEX experiments have been quantitatively replicated with peroxonitrites. Further, it is to be expected from information about the photochemistry of nitrogen in the atmosphere, the calculated fluxes of the NO(x) to the surface, the known reactions of NO(x) with carbonates to produce nitrates and photolysis studies of nitrates, that peroxonitrites are present on Mars. However, considerable uncertainty has existed about the form in which oxygen is stored in photolyzed nitrate crystals. Models have ranged from micropores of O2 to chemically bound oxygen as peroxonitrite (O2NOO(-)), as well as peroxonitrite. Studies of the solution chemistry and solid state photochemistry were completed, which show that much of the oxygen evolved on wetting comes from thermal breakdown of peroxonitrite after it is dissolved. A chemical model is developed for the photochemical processes occurring during UV irradiation of solid nitrates which resolves the several contradictory models discussed in the literature in recent years.
Plumb, Robert C.↗
Interpretable ML Approaches for Novel Solid State Electrolyte Design
All-solid-state batteries with Li metal anode can address the safety issues surrounding traditional Li-ion batteries as well as the demand for higher energy densities. However, the development of solid electrolytes simultaneously possessing high ionic conductivity and good chemical and electrochemical stabilities has proven to be a challenge. I will present our informatics approach to explore the Li compound space for promising solid electrolytes using high-throughput multi-property screening and interpretable machine learning. This is accomplished through the generation of a large database of battery-related materials properties of Li compounds. We use tree-based ensemble learning methods and graph neural network approaches to accurately learn relationships between crystal structures and corresponding thermodynamic and kinetic properties, with interpretability being a major focus. Our models give us the ability to enable rapid discovery and design of novel solid-state battery chemistries.
Shreyas J Honrao↗
Research on the physics of solid materials semiannual status report no. 12, 1 nov. 1964 - 30 apr. 1965
Solid state physics, physical metallurgy, and chemistry of solids - development of advanced crystal growing facilities for materials science and solid state physics groups
SOLID STATE PHYSICS↗
Latent Hardeners for the Assembly of Epoxy Composites
Large-scale composite structures are commonly joined by secondary bonding of molded-and-cured thermoset components. This approach may result in unpredictable joint strengths. In contrast, assemblies made by co-curing, although limited in size by the mold, result in stable structures, and are certifiable for commercial aviation because of structural continuity through the joints. Multifunctional epoxy resins were prepared that should produce fully-cured subcomponents with uncured joining surfaces, enabling them to be assembled by co-curing in a subsequent out-of-autoclave process. Aromatic diamines were protected by condensation with a ketone or aldehyde to form imines. Properties of the amine-cured epoxy were compared with those of commercially available thermosetting epoxy resins and rheology and thermal analysis were used to demonstrate the efficacy of imine protection. Optimum conditions to reverse the protecting chemistry in the solid state using moisture and acid catalysis were determined. Alternative chemistries were also investigated. For example, chain reaction depolymerization and photoinitiated catalysts would be expected to minimize liberation of volatile organic content upon deprotection and avoid residual reactive species that could damage the resin. Results from the analysis of protected and deprotected resins will be presented.
Palmieri, Frank↗
Chemistry of electronic ceramic materials. Proceedings of the International Conference on the Chemistry of Electronic Ceramic Materials
The conference was held at Jackson Hole, Wyoming from August 17 to 22, 1990, and in an attempt to maximize the development of this rapidly moving, multidisciplinary field, this conference brought together major national and international researchers to bridge the gap between those primarily interested in the pure chemistry of inorganic solids and those interested in the physical and electronic properties of ceramics. With the many major discoveries that have occurred over the last decade, one of the goals of this meeting was to evaluate the current understanding of the chemistry of electronic ceramic materials, and to assess the state of a field that has become one of the most important areas of advanced materials research. The topics covered include: crystal chemistry; dielectric ceramics; low temperature synthesis and characterization; solid state synthesis and characterization; surface chemistry; superconductors; theory and modeling.
Davies, P. K.↗
Dielectrics for long term space exposure and spacecraft charging: A briefing
Charging of dielectrics is a bulk, not a surface property. Radiation driven charge stops within the bulk and is not quickly conducted to the surface. Very large electric fields develop in the bulk due to this stopped charge. At space radiation levels, it typically requires hours or days for the internal electric fields to reach steady state. The resulting electric fields are large enough to produce electrical failure within the insulator. This type failure is thought to produce nearly all electric discharge anomalies. Radiation also induces bond breakage, creates reactive radicals, displaces atoms and, in general, severely changes the chemistry of the solid state material. Electric fields can alter this process by reacting with charged species, driving them through the solid. Irradiated polymers often lose as much as a percent of their mass, or more, at exposures typical in space. Very different aging or contaminant emission can be induced by the stopped charge electric fields. These radiation effects are detailed.
Frederickson, A. R.↗
Applications of surface analysis and surface theory in tribology
Tribology, the study of adhesion, friction and wear of materials is a complex field which requires a knowledge of solid state physics, surface physics, chemistry, material science and mechanical engineering. It has been dominated, however, by the more practical need to make equipment work. With the advent of surface analysis and advances in surface and solid state theory, a new dimension has been added to the analysis of interactions at tribological interfaces. In this paper the applications of tribological studies and their limitations are presented. Examples from research at the NASA Lewis Research Center are given. Emphasis is on fundamental studies involving the effects of monolayer coverage and thick films on friction and wear. A summary of the current status of theoretical calculations of defect energetics is presented. In addition, some new theoretical techniques which enable simplified quantitative calculations of adhesion, fracture and friction are discussed.
Ferrante, John↗
Applications of surface analysis and surface theory in tribology
Tribology, the study of adhesion, friction and wear of materials, is a complex field which requires a knowledge of solid state physics, surface physics, chemistry, material science, and mechanical engineering. It has been dominated, however, by the more practical need to make equipment work. With the advent of surface analysis and advances in surface and solid-state theory, a new dimension has been added to the analysis of interactions at tribological interfaces. In this paper the applications of tribological studies and their limitations are presented. Examples from research at the NASA Lewis Research Center are given. Emphasis is on fundamental studies involving the effects of monolayer coverage and thick films on friction and wear. A summary of the current status of theoretical calculations of defect energetics is presented. In addition, some new theoretical techniques which enable simplified quantitative calculations of adhesion, fracture, and friction are discussed.
Ferrante, John↗
Solid-state battery designed for electric aviation
The demand for higher energy density batteries increases as the demand for portable electronic devices and electric automotive increases, as well as a variety of other applications requiring substantially higher power and energy than attainable with current lithium-ion capabilities which includes the areas of high performance vehicles, military applications, and electric aviation. However, the improvement of energy density is insufficient alone for enabling electric aviation when considering the high flammability and risk of thermal runaway inherent in current state-of-the-art liquid electrolytes. The development of high energy, high power, and safe batteries are required to enable hybrid and fully electric aircraft. Next generation chemistries such as lithium-sulfur provide high theoretical specific energy density suitable for electric aviation without as strict of volumetric requirements observed in the automotive industry. However, due to the phase transition during discharge where sulfur generates a series of soluble intermediate polysulfides, which are lost to the liquid electrolyte, cause detrimental side effects, and severely limit cycle life battery performance is severely reduced. Additionally, the low electrical conductivity of sulfur requires a large amount of inactive carbon dramatically increasing parasitic mass. The dissolution issue make sulfur a desirable candidate to pair with a solid-state electrolyte in order to avoid polysulfide dissolution and shuttling. In addition, inorganic solid-electrolytes have low flammability providing the improved safety required. Combining this chemistry with a solid-state electrolyte provides a path for achieving the energy and safety required for electric aviation. The development of scalable thin solid-state electrolytes paired with lithium-sulfur chemistry will be discussed and how their development will aid in enabling a unique application.
Donald A. Dornbusch↗
The Origins and Evolution of Molecules in Icy Solids
Astronomical observations of the past few decades have revealed the existence of a variety of molecules in extraterrestrial ices. These molecules include H2O, CO, and CO2, and organics such as CH4, CH30H, and C2H6. Some ices are dominated by polar molecules, while non-polar species appear to dominate others. Observations, mainly in the radio and IR regions, have allowed the inference of other solid-phase molecules whose formation remains difficult to explain by gas-phase chemistry alone. Several laboratory research groups have reported on extensive experiments on the solid-phase reaction chemistry of icy materials, generally as initiated by either ionizing radiation or vacuum-UV photons. These experiments not only permit molecular identifications to be made from astronomical observations, but also allow predictions of yet unidentified molecules. This laboratory approach has evolved over more than 30 years with much of the earliest work focusing on complex mixtures thought to represent either cometary or interstellar ices. Although those early experiments documented a rich solid-state photo- and radiation chemistry, they revealed few details of reactions for particular molecules, partly due to the multi-component nature of the samples. Since then, model systems have been examined that allow the chemistry of individual species and specific reactions to be probed. Reactions involving most of the smaller astronomical molecules have now been studied and specific processes identified. Current laboratory work suggests that a variety of reactions occur in extraterrestrial ices, including acid-base processes, radical dimerizations, proton transfers, oxidations, reductions, and isomerizations. This workshop presentation will focus on chemical reactions relevant to solar system and interstellar ices. While most of the work will be drawn from that to which the speaker has contributed, results from other laboratories also will be included. Suggestions for future studies will be made, with an emphasis on some present deficiencies. The speaker's work has been generously supported by these NASA research programs: Cassini Data Analysis, Exobiology, Mars Fundamental Research, Outer Planets Research, Planetary Atmospheres, Planetary Geology and Geophysics, and the NASA Astrobiology Institute.
Hudson, Reggie L.↗
Tribology theory versus experiment
Tribology, the study of friction and wear of materials, has achieved a new interest because of the need for energy conservation. Fundamental understanding of this field is very complex and requires a knowledge of solid-state physics, material science, chemistry, and mechanical engineering. This paper is meant to be didactic in nature and outlines some of the considerations needed for a tribology research program. The approach is first to present a simple model, a field emission tip in contact with a flat surface, in order to elucidate important considerations, such as contact area, mechanical deformations, and interfacial bonding. Then examples from illustrative experiments are presented. Finally, the current status of physical theories concerning interfacial bonding are presented.
Ferrante, John↗