Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Magnetism in EuAlSi and the Eu 1−𝑥 ⁢Sr 𝑥 ⁢ AlSi solid solution solid solution

The magnetic properties of EuAlSi, a compound comprising a honeycomb lattice of Al/Si atoms and a triangular lattice of Eu atoms, are presented. By means of single-crystal x-ray diffraction, we find that EuAlSi crystallizes in an AlB 2 -type structure with space group 𝑃⁢6/mmm and unit cell parameters 𝑎 = 4.2229⁢ (10) ⁢Å and 𝑐 = 4.5268 ⁢(12)⁢ Å. Our magnetic measurements indicate that EuAlSi is a soft ferromagnetic material with 𝑇 Curie = 25.8 K. The susceptibility follows the Curie-Weiss law at high temperatures, which allowed us to determine the paramagnetic Curie temperature 𝜃 𝑃 = 36.2 ⁢(1) ⁢K and an effective magnetic moment 𝜇 eff = 8.07 ⁢(1)⁢ µ 𝐵 /Eu. This value is in agreement with the theoretical value of 7.9 µ 𝐵 for Eu 2+ free ion. Moreover, we have prepared the Eu 1−𝑥 ⁢Sr 𝑥 ⁢ AlSi solid solution, where the atoms in the triangular lattice were systematically exchanged, in order to study the evolution of the collective quantum properties from the ferromagnetic EuAlSi toward the superconducting SrAlSi. Across the Eu 1−𝑥 ⁢Sr 𝑥 AlSi solid solution, the unit cell parameters change linearly, following Vegard’s law, and making the system reliable for studying composition dependence of the interplay between the crystal structure and physical properties. As the Sr content increases, i.e., 𝑥 increases, we note a consistent reduction of 𝜇 eff and 𝑇 Curie . Long-range magnetic order in Eu 1−𝑥 ⁢Sr 𝑥 ⁢ AlSi persists up to 𝑥 = 0.95, whereas superconductivity is only observed for samples with 𝑥 > 0.97.

Walicka, Dorota I. [University of Geneva (Switzerl↗
DOE OSTI2026

A first principles approach for determining solute effect on electrical resistivity of Aluminum solid solution

There are no general approaches for predicting the effect of solutes on electrical resistivity changes in aluminum (Al) solid solutions. Here, we introduce a first principles-based approach for predicting temperature-dependent electrical resistivity of Al solid solutions. A combination of electronic structure methods was applied to calculate electronic scattering effects on chemical disorder and temperature induced atomic vibrations or phonons. Our calculations are validated by contrasting experimental resistivity measurements for two elements in Al solid solution: at 0.3 at. % concentration, Sn (an sp-valence solute) increases the residual resistivity by 0.2 μΩ·m, whereas Zr (a d-valence solute) causes a 2.5 μΩ·m increase. This trend may deviate for solute elements in Al that form semiconductors in pure state, like Si. Our findings provide an understanding of the role of valence electron character of solute atoms in determining electrical resistivity of Al alloys.

Samolyuk, German [ORNL] (ORCID:0000000168778255)↗
NASA NTRS2026

Thermodynamic Properties of Uranium-Zirconium Carbide Solid Solutions with Oxygen

Uranium-zirconium carbide solid solutions are potential candidates for fuel in space nuclear reactors. To support development of advanced robust fuels for space applications, (U y Zr 1-y )C x O z solid solutions were synthesized via carbothermic reduction with uranium, carbon, and oxygen contents raging from y=0.05 – 0.3, x=0.95 – 0.98, and z = 0.02 – 0.07. These solid solutions were subsequently characterized by X-ray diffraction and elemental combustion analysis. High-temperature oxidative drop solution calorimetry in molten sodium molybdate solvent at 1073 K was employed to determine the formation, oxidation, and mixing enthalpies of (U y Zr 1-y )C x O z solid solutions, and thereby for evaluating their thermodynamic stability. The solid solutions are enthalpically less stable than the UC and ZrC end members. They also become less stable and more reactive towards oxidation with increasing uranium content. Incorporation of oxygen into solid solutions increases their solid solution-stability and improves their oxidation resistance.

Calorimetry↗
NASA NTRS2006

Development and Characterization of Improved NiTiPd High-Temperature Shape-Memory Alloys by Solid-Solution Strengthening and Thermomechanical Processing

The need for compact, solid-state actuation systems for use in the aerospace, automotive, and other transportation industries is currently motivating research in high-temperature shape-memory alloys (HTSMA) with transformation temperatures greater than 100 C. One of the basic high-temperature alloys investigated to fill this need is Ni(19.5)Ti(50.5)Pd30. Initial testing has indicated that this alloy, while having acceptable work characteristics, suffers from significant permanent deformation (or ratcheting) during thermal cycling under load. In an effort to overcome this deficiency, various solid-solution alloying and thermomechanical processing schemes were investigated. Solid-solution strengthening was achieved by substituting 5at% gold or platinum for palladium in Ni(19.5)Ti(50.5)Pd30, the so-called baseline alloy, to strengthen the martensite and austenite phases against slip processes and improve thermomechanical behavior. Tensile properties, work behavior, and dimensional stability during repeated thermal cycling under load for the ternary and quaternary alloys were compared. The relative difference in yield strength between the martensite and austenite phases and the dimensional stability of the alloy were improved by the quaternary additions, while work output was only minimally impacted. The three alloys were also thermomechanically processed by cycling repeatedly through the transformation range under a constant stress. This so-called training process dramatically improved the dimensional stability in these samples and also recovered the slight decrease in work output caused by quaternary alloying. An added benefit of the solid-solution strengthening was maintenance of enhanced dimensional stability of the trained material to higher temperatures compared to the baseline alloy, providing a greater measure of over-temperature capability.

Bigelow, Glen↗
NASA NTRS1994

CoSb(sub 3)-IrSb(sub 3)Solid Solutions: Preparations and Characterization

The binary antimonide compounds of the skutterudite family have a good potential for thermoelectric applications as recent results at JPL have shown. However, the room temperature thermal conductivity of these materials is about 10 Wm(sup -1)K(sup -1) with an 80 % contribution from the lattice. To achieve maximum ZT values, the lattice thermal conductivity needs to be lowered. Because the lattice thermal conductivity of solid solutions can substantially decrease due to the addition of point defect phonon scattering (all state-of-the-art thermoelectric materials are solid solutions), a study of the formation of solid solutions between the antimonide skutterudite compounds is of interest. The preparation and characterization of both p-type and n-type CoSb(sub 3)-IrSb(sub 3) solid solutions by several techniques is reviewed in this paper. Experimental results showed that solid solutions were successfully formed in a wide range of compositions. The changes in the thermoelectric properties indicated the influence of a strong point defect scattering, resulting in large decreases in Hall mobility and thermal conductivity. The potential for high ZT values in CoSb(sub 3)-IrSb(sub 3) solid solutions is discussed.

mobility↗
DOE OSTI2024

Utilization of Novel (KNbO 3 ) 1− x (Ba 2 FeNbO 6 ) x ( x = 0.1, 0.2, 0.3) Solid Solutions for Efficient Photo‐Assisted Fenton Degradation of Methylene Blue Dye

Novel (KNbO 3 ) 1− x (Ba 2 FeNbO 6 ) x ( x = 0.1, 0.2, 0.3) solid solutions corresponding to K 0.82 Ba 0.18 Fe 0.09 Nb 0.91 O 3 , K 0.64 Ba 0.36 Fe 0.18 Nb 0.82 O 3 , and K 0.46 Ba 0.54 Fe 0.27 Nb 0.73 O 3 compounds have been synthesized via molten salt method. X‐ray diffraction confirms the formation of solid solutions, while transmission electron microscopy combined with energy‐dispersive spectroscopy results demonstrates a homogeneous distribution of elements. The obtained solid solutions crystallized in a cubic crystal structure, whereas the parent KNbO 3 possesses an orthorhombic structure. The wide bandgap semiconductor KNbO 3 transformed into a visible‐light‐active material, with its bandgap energy reduced from 3.56 eV to ≈2.4 eV. The substitution of K in KNbO 3 with Ba is responsible for structural modification from orthorhombic to cubic symmetry, whereas both structural modification and the substitution of Nb with Fe correlated with optical properties. The photocatalytic activities of all obtained solid solutions are improved compared with the parent KNbO 3 and Ba 2 FeNbO 6 compounds for photocatalytic degradation of methylene blue (MB) dye. Among the series of solid solutions, K 0.82 Ba 0.18 Fe 0.09 Nb 0.91 O 3 photocatalysts show the highest MB removal efficiency owing to its relatively higher surface area, suppressed charge carrier recombination, and more negative conduction band edge. Moreover, K 0.82 Ba 0.18 Fe 0.09 Nb 0.91 O 3 photocatalyst (0.1 g) combined with hydrogen peroxide (H 2 O 2 ) to form a novel photo‐Fenton system, achieving almost complete degradation of 100 mL of 10 mg L −1 MB dye in 30 min.

Avcıoğlu, Celal [Technische Universität Berlin, Fa↗
NASA NTRS1982

Investigation of compositional segregation during unidirectional solidification of solid solution semiconducting alloys

Compositional segregation of solid solution semiconducting alloys in the radial direction during unidirectional solidification was investigated by calculating the effect of a curved solid liquid interface on solute concentration at the interface on the solid. The formulation is similar to that given by Coriell, Boisvert, Rehm, and Sekerka except that a more realistic cylindrical coordinate system which is moving with the interface is used. Analytical results were obtained for very small and very large values of beta with beta = VR/D, where V is the velocity of solidification, R the radius of the specimen, and D the diffusivity of solute in the liquid. For both very small and very large beta, the solute concentration at the interface in the solid C(si) approaches C(o) (original solute concentration) i.e., the deviation is minimal. The maximum deviation of C(si) from C(o) occurs for some intermediate value of beta.

Wang, J. C.↗
NASA NTRS1974

Single crystals of metal solid solutions

The following definitions were sought in the research on single crystals of metal solid solutions: (1) the influence of convection and/or gravity present during crystallization on the substructure of a metal solid solution; (2) the influence of a magnetic field applied during crystallization on the substructure of a metal solid solution; and (3) requirements for a space flight experiment to verify the results. Growth conditions for the selected silver-zinc alloy system are described, along with pertinent technical and experimental details of the project.

Miller, J. F.↗
NASA NTRS1971

Thermodynamic properties of carbon in b.c.c. and f.c.c. iron-silicon-carbon solid solutions.

The equilibrium between hydrogen-methane gas mixtures and Fe-Si-C solid solutions has been investigated both as a function of temperature and carburizing gas composition. The thermodynamic properties of the carbon atoms in both b.c.c. and f.c.c. solid solution have been derived from the equilibrium measurements. The results found have been compared with those of earlier investigations and with the predictions of recent theoretical models on ternary solid solutions containing both substitutional and interstitial solute atoms.

Chraska, P.↗
NASA NTRS1993

Nucleation of the diamond phase in aluminium-solid solutions

Precipitation was studied from fcc solid solutions with silicon, germanium, copper and magnesium. Of all these elements only silicon and germanium form diamond cubic (DC) precipitates in fcc Al. Nucleation of the DC structure is enhanced if both types of atom are dissolved in the fcc lattice. This is interpreted as due to atomic size effects in the prenucleation stage. There are two modes of interference of fourth elements with nucleation of the DC phase in Al + Si, Ge. The formation of the DC phase is hardly affected if the atoms (for example, copper) are rejected from the (Si, Ge)-rich clusters. If additional types of atom are attracted by silicon and/or germanium, DC nuclei are replaced by intermetallic compounds (for example Mg2Si).

Hornbogen, E.↗
NASA NTRS1977

Pressureless sintered beta-prime-Si3N4 solid solution - Fabrication, microstructure, and strength

Pressureless sintering of beta-prime-Si3N4 solid solution was studied as a function of temperature using Si3N4, A1N, and Al2O3 as basic constituents. Y2O3-SiO2 additions were used to promote liquid-phase sintering. The sintered specimens were characterized with respect to density, microstructure, strength, oxidation, and thermal shock resistance. Density greater than 98 percent of theoretical was achieved by pressureless sintering at 1750 C. The microstructure consisted essentially of fine-grained beta-prime-Si3N4 solid solution as the major phase. Modulus of rupture strengths up to 483 M Pa were achieved at moderate temperature (1000 C), but decreased to 228 M Pa at 1380 C. This substantial strength loss was attributed to a 'glassy' grain boundary phase formed during cooling from the sintering temperature. The best oxidation resistance was exhibited by a composition containing 3 mol % Y2O3-SiO2 additives. Water quench thermal shock resistance was equivalent to that of reaction sintered silicon nitride but lower than hot-pressed silicon nitride.

Dutta, S.↗
DOE OSTI2025

Prediction of defect properties in concentrated solid solutions using a Langmuir-like model

The alleged existence of sluggish diffusion in high-entropy alloys has drawn controversy. In high-entropy alloys and, in general, in all solids, transport properties are controlled by point defect concentration, which must be known before performing atomistic simulations to compute transport coefficients. In this work, we present a general Langmuir-like model for defect concentration in an arbitrarily complex solid solution and apply this model to generate expressions for concentrations of vacancies and small interstitial atoms. We then calculate the vacancy concentration as a function of temperature in the equiatomic CoNiCrFeMn and FeAl alloys with modified embedded-atom-method potentials for various chemical orderings, showing there is no clear correlation between vacancy thermodynamics and chemical ordering in the CoNiCrFeMn alloy, but clear systematic patterns for FeAl. We believe this is due to the high stability of disordered, random, and ordered intermetallic phases, respectively, in the CoNiCrFeMn and FeAl systems. Finally, this work provides future avenues to the prediction of thermal interstitials and vacancies in solid solutions, which is necessary for models of nonequilibrium behavior of solid solutions.

composition↗
DOE OSTI2025

Super-expansive thermo-reversible interstitial solid solution of nanocrystal superlattices with mesogens

Designing superlattices of nanocrystals to mimic and extend the properties of atomic crystals has been a long-standing motivation in materials chemistry. Interstitial solid solutions, such as steel, are well-studied atomic lattices in which mobile components move among the interstices. These materials exhibit unique properties, including reversible structural changes and phase transitions. Interstitial solid solutions possess unique dynamic structures and reversible responses, which motivate the creation of their colloidal equivalents. Here, in this study, we report a fully thermo-reversible colloidal interstitial solid solution by combining liquid crystals and nanocrystals functionalized with promesogenic ligands. Mesogen molecules fill and diffuse among the interstices of a superlattice, resulting in a super-large thermal expansivity. The approach uses a modular design of interparticle interactions, allowing control of interparticle distance, microstructure and transition between crystallographic forms.

77 NANOSCIENCE AND NANOTECHNOLOGY↗