Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solar irradiance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Modeled soft X-ray solar irradiances

Solar soft X-rays have historically been inaccurately modeled in both relative variations and absolute magnitudes by empirical solar extreme ultraviolet (EUV) irradiance models. This is a result of the use of a limited number of rocket data sets which were primarily associated with the calibration of the AE-E satellite EUV data set. In this work, the EUV91 solar EUV irradiance model has been upgraded to improve the accuracy of the 3.0 to 5.0 nm relative irradiance variations. The absolute magnitude estimate of the flux in this wavelength range has also been revised upwards. The upgrade was accomplished by first digitizing the SOLRAD 11 satellite 4.4 to 6.0 nm measured energy flux data set, then extracting and extrapolating a derived 3.0 to 5.0 nm photon flux from these data, and finally by performing a correlation between these derived data and the daily and 81-day mean 10.7 cm radio flux emission using a multiple linear regression technique. A correlation coefficient of greater than 0.9 was obtained between the dependent and independent data sets. The derived and modeled 3.0 to 5.0 nm flux varies by more than an order of magnitude over a solar cycle, ranging from a flux below 1 x 10(exp 8) to a flux greater than 1 x 10(exp 9) photons per sq cm per sec. Solar rotational (27-day) variations in the flux magnitude are a factor of 2. The derived and modeled irradiance absolute values are an order of magnitude greater than previous values from rocket data sets related to the calibration of the AE-E satellite.

Tobiska, W. Kent↗

SOLAR SPECTRAL IRRADIANCE, SOLAR ACTIVITY, AND THE NEAR-ULTRA-VIOLET

The previous calculations of the Solar Spectral Irradiance (SSI) by the Solar Radiation Physical Modeling, version 2 system, are updated in this work by including new molecular photodissociation cross-sections of important species, and many more levels and lines in its treatment of non-LTE radiative transfer. The current calculations including the new molecular photodissociation opacities produce a reduced over-ionizaton of heavy elements in the lower chromosphere and solve the problems with prior studies of the UV SSI in the wavelength range 160–400 nm and now reproduce the available observations with much greater accuracy. Calculations and observations of the near-UV at 0.1 nm resolution and higher are compared. The current set of physical models includes four quiet-Sun and five active-region components, from which radiance is computed for ten observing angles. These radiances are combined with images of the solar disk to obtain the SSI and Total Solar Irradiance and their variations. The computed SSI is compared with measurements from space at several nm resolution and agreement is found within the accuracy level of these measurements. An important result is that the near-UV SSI increase with solar activity is significant for the photodissociation of ozone in the terrestrial atmosphere because a number of highly variable upper chromospheric lines overlap the ozone Hartley band.

79 ASTRONOMY AND ASTROPHYSICS↗

Toward Improved Modeling of Spectral Solar Irradiance for Solar Energy Applications: Preprint

This study introduces the National Renewable Energy Laboratory's (NREL's) recent efforts to extend the capability of the Fast All-sky Radiation Model for Solar applications (FARMS) by computing spectral solar irradiances over both horizontal and inclined surfaces. A new model is developed by computing the optical thickness of the atmosphere using a spectral irradiance model for clear-sky conditions, SMARTS2. A comprehensive lookup table (LUT) of cloud bidirectional transmittance distribution functions (BTDFs) is precomputed for 2002 wavelength bands using an atmospheric radiative transfer model, libRadtran. The solar radiation transmitted through the atmosphere is given by considering all possible paths of photon transmission and the relevent scattering and absorption attenuation. Our results indicate that this new model has an accuracy that is similar to that of state-of-the-art radiative transfer models, but it is significantly more efficient.

14 SOLAR ENERGY↗

Comparison of High-Frequency Solar Irradiance: Ground Measured vs. Satellite-Derived

High-frequency solar variability is an important to grid integration studies, but ground measurements are scarce. The high resolution irradiance algorithm (HRIA) has the ability to produce 4-sceond resolution global horizontal irradiance (GHI) samples, at locations across North America. However, the HRIA has not been extensively validated. In this work, we evaluate the HRIA against a database of 10 high-frequency ground-based measurements of irradiance. The evaluation focuses on variability-based metrics. This results in a greater understanding of the errors in the HRIA as well as suggestions for improvement to the HRIA.

14 SOLAR ENERGY↗

Prediction of Solar Irradiance and Photovoltaic Solar Energy Product Based on Cloud Coverage Estimation Using Machine Learning Methods

Cloud cover estimation from images taken by sky-facing cameras can be an important input for analyzing current weather conditions and estimating photovoltaic power generation. The constant change in position, shape, and density of clouds, however, makes the development of a robust computational method for cloud cover estimation challenging. Accurately determining the edge of clouds and hence the separation between clouds and clear sky is difficult and often impossible. Toward determining cloud cover for estimating photovoltaic output, we propose using machine learning methods for cloud segmentation. We compare several methods including a classical regression model, deep learning methods, and boosting methods that combine results from the other machine learning models. To train each of the machine learning models with various sky conditions, we supplemented the existing Singapore whole sky imaging segmentation database with hazy and overcast images collected by a camera-equipped Waggle sensor node. We found that the U-Net architecture, one of the deep neural networks we utilized, segmented cloud pixels most accurately. However, the accuracy of segmenting cloud pixels did not guarantee high accuracy of estimating solar irradiance. We confirmed that the cloud cover ratio is directly related to solar irradiance. Additionally, we confirmed that solar irradiance and solar power output are closely related; hence, by predicting solar irradiance, we can estimate solar power output. This study demonstrates that sky-facing cameras with machine learning methods can be used to estimate solar power output. This ground-based approach provides an inexpensive way to understand solar irradiance and estimate production from photovoltaic solar facilities.

14 SOLAR ENERGY↗

Solar irradiance variations and solar activity

A mean value for the 1 AU total solar irradiance of 1368.2 W/sq m and a downward trend of 0.05% per year were derived from measurements by the Active Cavity Radiometer Irradiance Monitor (ACRIM) experiment on the Solar Maximum Mission during 1980. Distinct temporary solar irradiance decreases associated with solar activity maxima were observed with a series of nine dips from April to October recurring at fairly regular intervals averaging 24 days. The decreases correlate inversely with sunspot area, 2800-MHz flux, and Zurich sunspot number. Dominant periods common to the irradiance and sunspot area power spectra link the irradiance decreases to sunspot flux deficit in solar active regions. Evidence of significant total irradiance modulation by facular flux excess is cited. A persistent radiative cycle of active regions consistent with the ACRIM irradiance results and the morphology of solar active regions was found. The pattern of regularly recurrent active region maxima between April and October suggests an asymmetry in solar activity generation during this period.

Willson, R. C.↗

Future Satellite Observations of Solar Irradiance

Required solar irradiance measurements for climate studies include those now being made by the Total Irradiance Monitor (TIM) and the Spectral Irradiance Monitor (SIM) onboard the SORCE satellite, part of the Earth Observing System fleet of NASA satellites. Equivalent or better measures of Total Solar Irradiance (TSI) and Spectral Solar Irradiance (SSI, 200 to 2000 nm) are planned for the post-2010 satellites of the National Polar-orbiting Operational Environmental Satellite System ("OESS). The design life of SORCE is 5 years, so a "Solar Irradiance Gap Filler" EOS mission is being planned for launch in the 2007 time frame, to include the same TSI and SSI measurements. Besides avoiding any gap, overlap of the data sources is also necessary for determination of possible multi-decadal trends in solar irradiance. We discuss these requirements and the impacts of data gaps, and data overlaps, that may occur in the monitoring of the critical solar radiative forcing.

Cahalan, R. F.↗

A Nonstationary and Non-Gaussian Moving Average Model for Solar Irradiance

Historically, power has flowed from large power plants to customers. Increasing penetration of distributed energy resources such as solar power from rooftop photovoltaic has made the distribution network a two-way-street with power being generated at the customer level. The incorporation of renewables introduces additional uncertainty and variability into the power grid. Distribution network operation studies are being adapted to include renewables; however, such studies require high quality solar irradiance data that adequately reflect realistic meteorological variability. Data from satellite-based products are spatially complete, but temporally coarse, whereas solar irradiances exhibit high frequency variation at very fine timescales. We propose a new stochastic method for temporally downscaling global horizontal irradiance (GHI) to 1 min resolution, but we do not consider the spatial aspect due to limited availability of the in situ irradiance measurements. Solar irradiance's first and second-order structures vary diurnally and seasonally, and our model adapts to such nonstationarity. Empirical irradiance data exhibits highly non-Gaussian behavior; we develop a nonstationary and non-Gaussian moving average model that is shown to capture realistic solar variability at multiple timescales. We also propose a new estimation scheme based on Cholesky factors of empirical autocovariance matrices, bypassing difficult and inaccessible likelihood-based approaches. The model is demonstrated for a case study of three locations that are located in diverse climates through the United States. The model is compared against competitors from the literature and is shown to provide better uncertainty and variability quantification on testing data.

Cholesky factor↗

Solar irradiance variability during solar cycles 21 and 22

Total solar irradiance observations by the Active Cavity Radiometer Irradiance Monitor (ACRIM) on the Solar Maximum Mission, the Nimbus 7/Earth Radiation Budget (ERB), the NASA/Earth Radiation Budget Satellite (ERBS), and NOAA 9/Earth Radiation Budget Experiment (ERBE) are combined to demonstrate the characteristics of the variation of solar luminosity over the solar cycles 21 and 22 between 1978 and 1990. Observations of solar Lyman Alpha and 10.7 MHz fluxes are used to demonstrate a total irradiance variability asymmetry relative to the maximum of solar activity.

Willson, Richard C.↗

Nanostructured Solar Irradiation Control Materials for Solar Energy Conversion

Tailoring the solar absorptivity (alpha(sub s)) and thermal emissivity (epsilon(sub T)) of materials constitutes an innovative approach to solar energy control and energy conversion. Numerous ceramic and metallic materials are currently available for solar absorbance/thermal emittance control. However, conventional metal oxides and dielectric/metal/dielectric multi-coatings have limited utility due to residual shear stresses resulting from the different coefficient of thermal expansion of the layered materials. This research presents an alternate approach based on nanoparticle-filled polymers to afford mechanically durable solar-absorptive and thermally-emissive polymer nanocomposites. The alpha(sub s) and epsilon(sub T) were measured with various nano inclusions, such as carbon nanophase particles (CNPs), at different concentrations. Research has shown that adding only 5 wt% CNPs increased the alpha(sub s) and epsilon(sub T) by a factor of about 47 and 2, respectively, compared to the pristine polymer. The effect of solar irradiation control of the nanocomposite on solar energy conversion was studied. The solar irradiation control coatings increased the power generation of solar thermoelectric cells by more than 380% compared to that of a control power cell without solar irradiation control coatings.

Kang, Jinho↗

SORCE and Future Satellite Observations of Solar Irradiance

With solar activity just passing the maximum of cycle 23, SORCE is beginning a 5 year mission to measure total solar irradiance (TSI) with unprecedented accuracy using phase-sensitive detection, and to measure spectral solar irradiance (SSI) with unprecedented spectral coverage, from 1 to 2000 nm. The new Total Irradiance Monitor (TIM) has 4 active cavity radiometers, any one of which can be used as a fixed-temperature reference against any other that is exposed to the Sun via a shutter that cycles at a rate designed to minimize noise at the shutter frequency. The new Spectral Irradiance Monitor (SIM) is a dual Fery prism spectrometer that can employ either prism as a monochromatic source on the other prism, thus monitoring its transmission during the mission lifetime. Either prism can measure SSI from 200 to 2000 nm, employing the same phase-sensitive electrical substitution strategy as TIM. SORCE also carries dual SOLSTICE instruments to cover the spectral range 100-320 nm, similar to the instruments onboard UARS, and also an XUV Photometer System (XPS) similar to that on TIMED. SSI has now been added to TSI as a requirement of EOS and NPOESS, because different spectral components drive different components of the climate system - UV into upper atmosphere and stratospheric ozone, IR into tropospheric water vapor and clouds, and Visible into the oceans and biosphere. Succeeding satellite missions being planned for 2006 and 2011 will continue to monitor these critical solar variables.

Cahalan, Robert F.↗

Two-parameter model of total solar irradiance variation over the solar cycle

Total solar irradiance measured by the SMM/ACRIM radiometer is modelled from the Photometric Sunspot Index and the Mg II core-to-wing ratio with multiple regression analysis. Considering that the formation of the Mg II line is very similar to that of the Ca II K line, the Mg II core-to-wing ratio, measured by the Nimbus-7 and NOAA9 satellites, is used as a proxy for the bright magnetic elements, including faculae and the magnetic network. It is shown that the relationship between the variations in total solar irradiance and the above solar activity indices depends upon the phase of the solar cycle. Thus, a better fit between total irradiance and its model estimates can be achieved if the irradiance models are calculated for the declining portion and minimum of solar cycle 21, and the rising portion of solar cycle 22, respectively. There is an indication that during the rising portion of solar cycle 22, similar to the maximum time of solar cycle 21, the modelled total irradiance values underestimate the measured values. This suggests that there is an asymmetry in the long-term total irradiance variability.

Pap, Judit M.↗

A stochastic downscaling approach for generating high-frequency solar irradiance scenarios

Solar power is increasingly cost viable with solar photovoltaic (PV) installations becoming commonplace. PV planning and operational studies, however, require high-frequency solar irradiance scenarios to understand potential electric grid impacts due to the variability and uncertainty of the underlying solar resource. Existing remote sensing solar data products are often available over large spatial domains, but are limited in temporal resolution. For example, the global horizontal irradiance (GHI) component contained within the National Solar Radiation Database (NSRDB) is available at time resolution of 30 min on an approximately four-kilometer grid. In contrast, substantial solar variability is present at finer time scales and this article describes an algorithm to stochastically generate one-minute GHI from widely available sub-hourly NSRDB. A generalized linear modeling (GLM) framework is proposed, which includes non-Gaussian mixtures, and extends the literature involving the synthesis of GHI data. The model is trained on a set of sample locations around Oregon, USA, and validated across the USA using both the Surface Radiation Budget Network (SURFRAD) dataset and Solar Radiation Monitoring Laboratory (SRML) network. Simulated ensembles show good coverage properties and temporal correlation structure. The resulting downscaled ensembles allow for understanding the unpredictable variability inherent in GHI at locations without direct measurements. Here, future work can leverage the algorithm as part of a stochastic optimization of electric grid operations with high-penetration PV systems.

14 SOLAR ENERGY↗

Improving Prediction of Surface Solar Irradiance Variability by Integrating Observed Cloud Characteristics and Machine Learning

A 5-year, 1-minute resolution observational dataset of clouds and solar radiation was produced that includes two metrics of the variability in surface solar irradiance due to cloud type and fractional sky cover. Multiple regression models were trained to fit observations of surface solar irradiance variability from those two cloud property predictors. We found that ensemble tree-based methods, Random Forest and Gradient Boosting Machine, have the least overfitting issues and showed the best performance with an R2 of 0.42. While the observational data trained in this study was only from one site, the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) site in Oklahoma, initial comparisons of the seasonality of the statistics suggest that these results are relatively weather regime independent; the generality of such a finding across sites will be tested in future work. The observational data and developed machine learning model are being used to create a numerical weather prediction model parameterization to enable day-ahead solar variability prediction in a computationally efficient way. This is a first step towards creating a new paradigm of predicting day-ahead variability with the potential to provide a new tool to improve grid operation, planning, and resilience.

Riihimaki, Laura↗

Method to Calculate Uncertainty Estimate of Measuring Shortwave Solar Irradiance using Thermopile and Semiconductor Solar Radiometers

The uncertainty of measuring solar irradiance is fundamentally important for solar energy and atmospheric science applications. Without an uncertainty statement, the quality of a result, model, or testing method cannot be quantified, the chain of traceability is broken, and confidence cannot be maintained in the measurement. Measurement results are incomplete and meaningless without a statementof the estimated uncertainty with traceability to the International System of Units (SI) or to another internationally recognized standard. This report explains how to use International Guidelines of Uncertainty in Measurement (GUM) to calculate such uncertainty. The report also shows that without appropriate corrections to solar measuring instruments (solar radiometers), the uncertainty ofmeasuring shortwave solar irradiance can exceed 4% using present state-of-the-art pyranometers and 2.7% using present state-of-the-art pyrheliometers. Finally, the report demonstrates that by applying the appropriate corrections, uncertainties may be reduced by at least 50%. The uncertainties, with or without the appropriate corrections might not be compatible with the needs of solar energy andatmospheric science applications; yet, this report may shed some light on the sources of uncertainties and the means to reduce overall uncertainty in measuring solar irradiance.

14 SOLAR ENERGY↗

Active-region evolution and solar rotation variations in solar UV irradiance, total solar irradiance, and soft X rays

Variations in the total solar irradiance, solar UV spectral irradiance, and solar soft X-ray emission caused by active region evolution and solar rotation are analyzed by using concurrent measurements from the NIMBUS 7 and GOES satellites. The observations are interpreted by using simple empirical models that relate ground-based observations of the size and location of sunspots and plages to the full-disk temporal variations. It is found that the major dips in the photospheric total solar irradiance S, which are evident in both satellite measurements and model predictions, are usually not accompanied by outstanding enhancements in the chromospheric and upper photospheric UV spectral irradiance or coronal X rays. The main cause of this difference between the variability of S and of the UV flux is that the total chromospheric plage enhancements are not outstanding at those times when the total sunspot are outstanding. X rays are even more variable because of a much wider CMD sensitivity.

Donnelly, R. F.↗