Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “simplified analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Simplified Analysis Of Vehicle/Payload Vibrations

Simplified mathematical model of coupled vibrations of vehicle and its payloads used in stability analysis for control purposes. Multiple-payload stability criterion extension of single-payload criterion based on measurements and detailed calculations of fundamental vibrational modes of vehicle and payload. Represented in simplified form by coupled masses and springs vibrating in one dimension, each spring having stiffness that gives rise to previously determined fundamental vibrational frequency associated mass in absence of coupling with other mass. Developed to avoid complexity and cost of full vibrations/stability calculations for each different combination of Space Shuttle payloads, simplified analysis technique also useful in assessing stability in loaded airplanes, ships, trucks, cranes, and conveyor systems.

Yu, Reginald R. J.↗
NASA NTRS1972

Simplified analysis and optimization of space base and space shuttle heat rejection systems

A simplified radiator system analysis was performed to predict steady state radiator system performance. The system performance was found to be describable in terms of five non-dimensional system parameters. The governing differential equations are integrated numerically to yield the enthalpy rejection for the coolant fluid. The simplified analysis was extended to produce the derivatives of the coolant exit temperature with respect to the governing system parameters. A procedure was developed to find the optimum set of system parameters which yields the lowest possible coolant exit temperature for either a given projected area or a given total mass. The process can be inverted to yield either the minimum area or the minimum mass, together with the optimum geometry, for a specified heat rejection rate.

Wulff, W.↗
NASA NTRS1976

A simplified analysis of propulsion installation losses for computerized aircraft design

A simplified method is presented for computing the installation losses of aircraft gas turbine propulsion systems. The method has been programmed for use in computer aided conceptual aircraft design studies that cover a broad range of Mach numbers and altitudes. The items computed are: inlet size, pressure recovery, additive drag, subsonic spillage drag, bleed and bypass drags, auxiliary air systems drag, boundary-layer diverter drag, nozzle boattail drag, and the interference drag on the region adjacent to multiple nozzle installations. The methods for computing each of these installation effects are described and computer codes for the calculation of these effects are furnished. The results of these methods are compared with selected data for the F-5A and other aircraft. The computer program can be used with uninstalled engine performance information which is currently supplied by a cycle analysis program. The program, including comments, is about 600 FORTRAN statements long, and uses both theoretical and empirical techniques.

Morris, S. J., Jr.↗
NASA NTRS2002

Simplified Analysis of Pulse Detonation Rocket Engine Blowdown Gasdynamics and Performance

Pulse detonation rocket engines (PDREs) offer potential performance improvements over conventional designs, but represent a challenging modellng task. A simplified model for an idealized, straight-tube, single-shot PDRE blowdown process and thrust determination is described and implemented. In order to form an assessment of the accuracy of the model, the flowfield time history is compared to experimental data from Stanford University. Parametric Studies of the effect of mixture stoichiometry, initial fill temperature, and blowdown pressure ratio on the performance of a PDRE are performed using the model. PDRE performance is also compared with a conventional steady-state rocket engine over a range of pressure ratios using similar gasdynamic assumptions.

Morris, C. I.↗
NASA NTRS2001

Simplified Analysis of Pulse Detonation Rocket Engine B1owdown Gasdynamics and Performance

Pulsed detonation rocket engines (PDREs) have generated considerable research interest in recent years as a chemical propulsion system potentially offering improved performance and reduced complexity compared to conventional rocket engines. The detonative mode of combustion employed by these devices offers a thermodynamic advantage over the constant-pressure deflagrative combustion mode used in conventional rocket engines and gas turbines. However, while this theoretical advantage has spurred a great deal of interest in building PDRE devices, the unsteady blowdown process intrinsic to the PDRE has made realistic estimates of the actual propulsive performance problematic. The recent review article by Kailasanath highlights some of the difficulties in comparing the available experimental measurements with numerical models. The goal of this paper is to improve understanding of PDRE blowdown gasdynamics and performance issues through use of a simplified model that captures the essential features of the unsteady blowdown process, and yet remains computationally inexpensive. The PDRE system studied here is highly idealized, consisting of a constant-area detonation tube with one end closed and the other end open to the environment. The tube is prefilled with a gaseous propellant mixture with no initial velocity or outflow to the environment. The detonation is initiated instantaneously at the closed end of the device. Chapman-Jouguet (C-J) post-detonation gas conditions are calculated using the CET89 version of the NASA thermochemical code. The I-D, unsteady method of characteristics is used to calculate the flowfield following the detonation front. See the compressible flow texts by Thompson and Zucrow and Hoffman for details of this method. Parametric studies of the effect of mixture stoichiometry, fill temperature, and blowdown pressure ratio on performance are reported. A comparison of the performance of an idealized straight-tube PDRE with a conventional steady-state rocket engine is provided. The effect of constant-gamma and equilibrium chemistry assumptions is also examined. Additionally, in order to form an assessment of the accuracy of the model, the flowfield time history is compared to experimental data from Stanford University.

Morris, Christopher I.↗
NASA NTRS1983

Simplified analysis techniques to support the determination of Shuttle aerodynamics

The use of deterministic and regression methods to supplement the maximum likelihood estimation programs for the determination of the stability and control parameters of the Shuttle vehicle is discussed. Examples taken from STS-2 and STS-3 flight data show the use of deterministic methods to verify the effectiveness of the pitch and roll Reaction Control System (RCS), to verify the model structure used in the maximum likelihood estimator and to indicate regions of the descent trajectory where unmodeled moments dominate the vehicle motion and the application of maximum likelihood estimation would lead to incorrect parameter values. The use of regression methods to determine selected parameters when the more sophisticated maximum likelihood programs are not required, to determine the form of the vehicle mathematical model and to select the data time intervals for most effective parameter identification are also discussed.

Suit, W. T.↗
NASA NTRS1985

Space station ECLSS integration analysis: Simplified General Cluster Systems Model, ECLS System Assessment Program enhancements

The data base verification of the ECLS Systems Assessment Program (ESAP) was documented and changes made to enhance the flexibility of the water recovery subsystem simulations are given. All changes which were made to the data base values are described and the software enhancements performed. The refined model documented herein constitutes the submittal of the General Cluster Systems Model. A source listing of the current version of ESAP is provided in Appendix A.

Ferguson, R. E.↗
NASA NTRS1988

Simplified Analysis Of Shock Waves

Semiempirical expressions and conventional analyses agree within about 3 percent. Set of semiempirical formulas enables direct calculation of supersonic and hypersonic shock-wave parameters without use of iterative procedures. Formulas provided for calculating shock deflection angle and downstream static pressure and enthalpy over mach number range of 2 to 25. Relationship describing thermodynamic behavior of partially dissociated air also developed.

Neuenschwander, Wilmer E.↗
NASA NTRS1988

A simplified analysis of the multigrid V-cycle as a fast elliptic solver

For special model problems, Fourier analysis gives exact convergence rates for the two-grid multigrid cycle and, for more general problems, provides estimates of the two-grid convergence rates via local mode analysis. A method is presented for obtaining mutigrid convergence rate estimates for cycles involving more than two grids (using essentially the same analysis as for the two-grid cycle). For the simple cast of the V-cycle used as a fast Laplace solver on the unit square, the k-grid convergence rate bounds obtained by this method are sharper than the bounds predicted by the variational theory. Both theoretical justification and experimental evidence are presented.

Decker, Naomi H.↗
NASA NTRS2007

Optics Program Simplifies Analysis and Design

Engineers at Goddard Space Flight Center partnered with software experts at Mide Technology Corporation, of Medford, Massachusetts, through a Small Business Innovation Research (SBIR) contract to design the Disturbance-Optics-Controls-Structures (DOCS) Toolbox, a software suite for performing integrated modeling for multidisciplinary analysis and design. The DOCS Toolbox integrates various discipline models into a coupled process math model that can then predict system performance as a function of subsystem design parameters. The system can be optimized for performance; design parameters can be traded; parameter uncertainties can be propagated through the math model to develop error bounds on system predictions; and the model can be updated, based on component, subsystem, or system level data. The Toolbox also allows the definition of process parameters as explicit functions of the coupled model and includes a number of functions that analyze the coupled system model and provide for redesign. The product is being sold commercially by Nightsky Systems Inc., of Raleigh, North Carolina, a spinoff company that was formed by Mide specifically to market the DOCS Toolbox. Commercial applications include use by any contractors developing large space-based optical systems, including Lockheed Martin Corporation, The Boeing Company, and Northrup Grumman Corporation, as well as companies providing technical audit services, like General Dynamics Corporation

Source record↗
NASA NTRSDate not supplied

Simplifying Analysis of Hierarchical HDF5 and NetCDF4 Files with Xarray-Datatree

NASA’s Earth Observing System Data and Information System (EOSDIS) contains thousands of Earth science datasets from satellites, models, and field campaigns. EOSDIS data are stored in formats that are well supported by the Earth Science community. These formats include the Hierarchical Data Format (HDF), with derivative flavors such as HDF-5 and the Network Common Data Format (NetCDF-4). The HDF specification allows for a directory-like hierarchy within a single file, known as "groups". Observational data and associated metadata within a single file can be distributed amongst multiple internal groups, which can also be nested to multiple levels. Working with datasets that have a group hierarchical structure can be difficult because of the nested structure of groups. Widely used packages, such as xarray, have data models that do not accommodate the hierarchical structure within HDF files, requiring users to traverse the file and open different HDF groups as separate, unrelated objects. Xarray-datatree is a Python package developed to solve the difficulty of traversing HDFs with a hierarchical group structure by creating a tree-like hierarchical data structure in xarray. The tree-like structure allows each group to be accessed once a DataTree object is instantiated. The migration of xarray-datatree into the xarray core library will reduce barriers to accessing Earth science data by eliminating the need to understand and traverse the specific hierarchy of a grouped HDF file.

Eni Awowale↗
NASA NTRS1977

Generalized vegetation map of north Merrit Island based on a simplified multispectral analysis

A simplified system for classification of multispectral data was used for making a generalized map of ground features of North Merritt Island. Subclassification of vegetation within broad categories yielded promising results which led to a completely automatic method and to the production of satisfactory detailed maps. Changes in an area north of Happy Hammocks are evidently related to water relations of the soil and are not associated with the last winter freeze-damage which affected mainly the mangrove species, likely to reestablish themselves by natural processes. A supplementary investigation involving reflectance studies in the laboratory has shown that the reflectance by detached citrus leaves, of wavelengths lying between 400 microns and 700 microns, showed some variation over a period of seven days during which the leaves were kept in a laboratory atmosphere.

Poonai, P.↗
NASA NTRS2013

Simplified Aircraft-Based Paired Approach: Concept Definition and Initial Analysis

Simplified Aircraft-based Parallel Approach (SAPA) is an advanced concept proposed by the Federal Aviation Administration (FAA) to support dependent parallel approach operations to runways with lateral spacing closer than 2500 ft. At the request of the FAA, NASA performed an initial assessment of the potential performance and feasibility of the SAPA concept, including developing and assessing an operational implementation of the concept and conducting a Monte Carlo wake simulation study to examine the longitudinal spacing requirements. The SAPA concept was shown to have significant operational advantages in supporting the pairing of aircraft with dissimilar final approach speeds. The wake simulation study showed that support for dissimilar final approach speeds could be significantly enhanced through the use of a two-phased altitudebased longitudinal positioning requirement, with larger longitudinal positioning allowed for higher altitudes out of ground effect and tighter longitudinal positioning defined for altitudes near and in ground effect. While this assessment is preliminary and there are a number of operational issues still to be examined, it has shown the basic SAPA concept to be technically and operationally feasible.

Johnson, Sally C.↗
NASA NTRS1985

Local strain redistribution corrections for a simplified inelastic analysis procedure based on an elastic finite-element analysis

Strain redistribution corrections were developed for a simplified inelastic analysis procedure to economically calculate material cyclic response at the critical location of a structure for life prediction proposes. The method was based on the assumption that the plastic region in the structure is local and the total strain history required for input can be defined from elastic finite-element analyses. Cyclic stress-strain behavior was represented by a bilinear kinematic hardening model. The simplified procedure predicts stress-strain response with reasonable accuracy for thermally cycled problems but needs improvement for mechanically load-cycled problems. Neuber-type corrections were derived and incorporated in the simplified procedure to account for local total strain redistribution under cyclic mechanical loading. The corrected simplified method was used on a mechanically load-cycled benchmark notched-plate problem. The predicted material response agrees well with the nonlinear finite-element solutions for the problem. The simplified analysis computer program was 0.3% of the central processor unit time required for a nonlinear finite-element analysis.

Kaufman, A.↗