Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sensor allocation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2004

Optimal Sensor Allocation for Fault Detection and Isolation

Automatic fault diagnostic schemes rely on various types of sensors (e.g., temperature, pressure, vibration, etc) to measure the system parameters. Efficacy of a diagnostic scheme is largely dependent on the amount and quality of information available from these sensors. The reliability of sensors, as well as the weight, volume, power, and cost constraints, often makes it impractical to monitor a large number of system parameters. An optimized sensor allocation that maximizes the fault diagnosibility, subject to specified weight, volume, power, and cost constraints is required. Use of optimal sensor allocation strategies during the design phase can ensure better diagnostics at a reduced cost for a system incorporating a high degree of built-in testing. In this paper, we propose an approach that employs multiple fault diagnosis (MFD) and optimization techniques for optimal sensor placement for fault detection and isolation (FDI) in complex systems. Keywords: sensor allocation, multiple fault diagnosis, Lagrangian relaxation, approximate belief revision, multidimensional knapsack problem.

Azam, Mohammad↗
NASA NTRS1989

Finite solid representation of robot manipulation in three-dimensional geometric reasoning

Intelligence robotic system design involves sensor allocation and sensor data fusion. In the field of geometric reasoning, a fast and effective representation method is needed to determine the physical dimensions of the manipulator as well as the motion environment in sufficient detail. Due to the capability of current sensor technology, the integrity of the sensor information is location dependent and point-wise, line-wise and plane-wise in nature. In order to maneuver the robot by reasoning the environment, there is a minimum requirement of prior information for integrating the allocated sensor feedback. Some new theoretical developments of how to associate the number and the locations of the sensors with three-dimensional geometry of the robot and the motion environment is presented. The related collision avoidance problem (CAP) will be addressed as well.

Chen, Alexander Y. K.↗
NASA NTRS1990

A study on diagnosability of space station ECLSS

The use is demonstrated of the Multigraph Architecture (MGA) for studies on the Environment Control and Life Support System (ECLSS). The objective was the following: (1) to create an updated set of models of the Potable Water Subsystem (PWS) by using the graphical model building tools of the Multigraph Programming Environment (MPE); (2) to derive a real time alarm simulator from the models; and (3) to demonstrate the effects of sensor allocation on the diagnosability of the PWS. This work may serve as a preliminary study for the detailed analysis of the sensor allocation and diagnosability problems in the ECLSS.

Padalkar, S.↗
NASA NTRS1982

Guidelines for spaceborne microwave remote sensors

A handbook was developed to provide information and support to the spaceborne remote sensing and frequency management communities: to guide sensor developers in the choice of frequencies; to advise regulators on sensor technology needs and sharing potential; to present sharing analysis models and, through example, methods for determining sensor sharing feasibility; to introduce developers to the regulatory process; to create awareness of proper assignment procedures; to present sensor allocations; and to provide guidelines on the use and limitations of allocated bands. Controlling physical factors and user requirements and the regulatory environment are discussed. Sensor frequency allocation achievable performance and usefulness are reviewed. Procedures for national and international registration, the use of non-allocated bands and steps for obtaining new frequency allocations, and procedures for reporting interference are also discussed.

Litman, V.↗
NASA NTRS2017

Augmented Method to Improve Thermal Data for the Figure Drift Thermal Distortion Predictions of the JWST OTIS Cryogenic Vacuum Test

The JWST Optical Telescope Element (OTE) assembly is the largest optically stable infrared-optimized telescope currently being manufactured and assembled, and is scheduled for launch in 2018. The JWST OTE, including the 18 segment primary mirror, secondary mirror, and the Aft Optics Subsystem (AOS) are designed to be passively cooled and operate near 45K. These optical elements are supported by a complex composite backplane structure. As a part of the structural distortion model validation efforts, a series of tests are planned during the cryogenic vacuum test of the fully integrated flight hardware at NASA JSC Chamber A. The successful ends to the thermal-distortion phases are heavily dependent on the accurate temperature knowledge of the OTE structural members. However, the current temperature sensor allocations during the cryo-vac test may not have sufficient fidelity to provide accurate knowledge of the temperature distributions within the composite structure. A method based on an inverse distance relationship among the sensors and thermal model nodes was developed to improve the thermal data provided for the nanometer scale WaveFront Error (WFE) predictions. The Linear Distance Weighted Interpolation (LDWI) method was developed to augment the thermal model predictions based on the sparse sensor information. This paper will encompass the development of the LDWI method using the test data from the earlier pathfinder cryo-vac tests, and the results of the notional and as tested WFE predictions from the structural finite element model cases to characterize the accuracies of this LDWI method.

Thermal Modeling↗
NASA NTRS1987

A new method of boundary parameter estimation for a two-dimensional diffusion system under noisy observations

The purpose of this paper is to establish a method for identifying unknown parameters involved in the boundary state of a class of diffusion systems under noisy observations. A mathematical model of the system dynamics is given by a two-dimensional diffusion equation. Noisy observations are made by sensors allocated on the system boundary. Starting with the mathematical model mentioned above, an online parameter estimation algorithm is proposed within the framework of the maximum likelihood estimation. Existence of the optimal solution and related necessary conditions are discussed. By solving a local variation of the cost functional with respect to the perturbation of parameters, the estimation mechanism is proposed in a form of recursive computations. Finally, the feasibility of the estimator proposed here is demonstrated through results of digital simulation experiments.

Sunahara, Y.↗
NASA NTRS1988

A method of boundary parameter estimation for a two-dimensional diffusion system under noisy observations

The purpose of this paper is to establish a method for identifying unknown parameters involved in the boundary state of a class of diffusion systems under noisy observations. A mathematical model of the system dynamics is given by a two-dimensional diffusion equation. Noisy observations are made by sensors allocated on the system boundary. Starting with the mathematical model mentioned above, an online parameter estimation algorithm is proposed within the framework of the maximum likelihood estimation. Existence of the optimal solution and related necessary conditions are discussed. By solving a local variation of the cost functional with respect to the perturbation of parameters, the estimation mechanism is proposed in a form of recursive computations. Finally, the feasibility of the estimator proposed here is demonstrated through results of digital simulation experiments.

Sunahara, Y.↗
NASA NTRS2017

Optimal Control Allocation with Load Sensor Feedback for Active Load Suppression, Experiment Development

The problem of control command and maneuver induced structural loads is an important aspect of any control system design. The aircraft structure and the control architecture must be designed to achieve desired piloted control responses while limiting the imparted structural loads. The classical approach is to utilize high structural margins, restrict control surface commands to a limited set of analyzed combinations, and train pilots to follow procedural maneuvering limitations. With recent advances in structural sensing and the continued desire to improve safety and vehicle fuel efficiency, it is both possible and desirable to develop control architectures that enable lighter vehicle weights while maintaining and improving protection against structural damage. An optimal control technique has been explored and shown to achieve desirable vehicle control performance while limiting sensed structural loads. The subject of this paper is the design of the optimal control architecture, and provides the reader with some techniques for tailoring the architecture, along with detailed simulation results.

controls↗
NASA NTRS2017

Optimal Control Allocation with Load Sensor Feedback for Active Load Suppression, Flight-Test Performance

The problem of control command and maneuver induced structural loads is an important aspect of any control system design. The aircraft structure and the control architecture must be designed to achieve desired piloted control responses while limiting the imparted structural loads. The classical approach is to utilize high structural margins, restrict control surface commands to a limited set of analyzed combinations, and train pilots to follow procedural maneuvering limitations. With recent advances in structural sensing and the continued desire to improve safety and vehicle fuel efficiency, it is both possible and desirable to develop control architectures that enable lighter vehicle weights while maintaining and improving protection against structural damage. An optimal control technique has been explored and shown to achieve desirable vehicle control performance while limiting sensed structural loads to specified values. This technique has been implemented and flown on the National Aeronautics and Space Administration Full-scale Advanced Systems Testbed aircraft. The flight tests illustrate that the approach achieves the desired performance and show promising potential benefits. The flights also uncovered some important issues that will need to be addressed for production application.

cFOSS↗
NASA NTRS2017

Optimal Control Allocation with Load Sensor Feedback for Active Load Suppression

These slide sets describe the OCLA formulation and associated algorithms as a set of new technologies in the first practical application of load limiting flight control utilizing load feedback as a primary control measurement. Slide set one describes Experiment Development and slide set two describes Flight-Test Performance.

Miller, Christopher↗
NASA NTRS2017

Optimal Control Allocation with Load Sensor Feedback for Active Load Suppression

These slide sets describe the OCLA formulation and associated algorithms as a set of new technologies in the first practical application of load limiting flight control utilizing load feedback as a primary control measurement. Slide set one describes Experiment Development and slide set two describes Flight-Test Performance.

Miller, Christopher↗
NASA NTRS1999

Robust Passification via Optimal Sensor Blending and Control Allocation

Robust passification is considered for uncertain linear, time invariant, systems having redundant actuators and sensors. The approach is to obtain optimal sensor blending and control allocation matrices that maximize the region in the parameter space in which the system remains passive. The approach results in a generalized eigenvalue problem consisting of a number of linear matrix inequalities (LMIs). Reduction of the number of LMIs is investigated, and a numerical example is given for demonstrating the approach.

Joshi, S. M.↗
NASA NTRS1999

Robust Passification via Optimal Sensor Blending and Control Allocation

Robust passification is considered for uncertain linear, time invariant systems having redundant actuators and sensors. The approach is to obtain optimal sensor blending and control allocation matrices that maximize the region in the parameter space in which the system remains passive. The approach results in a generalized eigenvalue problem consisting of a number of linear matrix inequalities (LMIs). Reduction of the number of LMIs is investigated, and a numerical example is given for demonstrating the approach.

Joshi, S. M.↗
NASA NTRS1972

Handbook for the calculation of approximate data for spaceborne sensors

In allocating the RF spectrum for the transmission of sensed data from space to earth, the characteristics of the data produced by each sensor are discussed. For example, data may be in the form of a continually varying voltage (analog) or may be a series of discrete pulses (digital). For the analog signal, its important characteristics to the spectrum allocator are its highest frequency component (bandwidth) and its range from minimum values (dynamic range or signal-to-noise ratio). For the digital signal, the characteristic of interest is the bit rate.

Source record↗
NASA NTRS1992

Robust Assignment Of Eigensystems For Flexible Structures

Improved method for placement of eigenvalues and eigenvectors of closed-loop control system by use of either state or output feedback. Applied to reduced-order finite-element mathematical model of NASA's MAST truss beam structure. Model represents deployer/retractor assembly, inertial properties of Space Shuttle, and rigid platforms for allocation of sensors and actuators. Algorithm formulated in real arithmetic for efficient implementation. Choice of open-loop eigenvector matrix and its closest unitary matrix believed suitable for generating well-conditioned eigensystem with small control gains. Implication of this approach is that element of iterative search for "optimal" unitary matrix appears unnecessary in practice for many test problems.

Juang, Jer-Nan↗
NASA NTRS1975

Remote sensing - Potential interference problems and solutions

The paper discusses general radio frequency interference considerations associated with frequency and bandwidth allocations for satellite-borne microwave remote sensors. The interplay of frequency allocation and radio frequency interference is discussed for the cases of passive microwave sensors and active microwave sensors, the latter case involving shared band interference and out-of-band interference.

Freibaum, J.↗
NASA NTRS1989

Causal simulation and sensor planning in predictive monitoring

Two issues are addressed which arise in the task of detecting anomalous behavior in complex systems with numerous sensor channels: how to adjust alarm thresholds dynamically, within the changing operating context of the system, and how to utilize sensors selectively, so that nominal operation can be verified reliably without processing a prohibitive amount of sensor data. The approach involves simulation of a causal model of the system, which provides information on expected sensor values, and on dependencies between predicted events, useful in assessing the relative importance of events so that sensor resources can be allocated effectively. The potential applicability of this work to the execution monitoring of robot task plans is briefly discussed.

Doyle, Richard J.↗