Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “seismology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Seismology and space-based geodesy

The potential of space-based geodetic measurement of crustal deformation in the context of seismology is explored. The achievements of seismological source theory and data analyses, mechanical modeling of fault zone behavior, and advances in space-based geodesy are reviewed, with emphasis on realizable contributions of space-based geodetic measurements specifically to seismology. The fundamental relationships between crustal deformation associated with an earthquake and the geodetically observable data are summarized. The response and spatial and temporal resolution of the geodetic data necessary to understand deformation at various phases of the earthquake cycle is stressed. The use of VLBI, SLR, and GPS measurements for studying global geodynamics properties that can be investigated to some extent with seismic data is discussed. The potential contributions of continuously operating strain monitoring networks and globally distributed geodetic observatories to existing worldwide modern digital seismographic networks are evaluated in reference to mutually addressable problems in seismology, geophysics, and tectonics.

Tralli, David M.↗
NASA NTRS2013

Saturn Ring Seismology: Interpreting the Seismogram

Marley (1990) and Marley and Porco (1993) proposed that f-mode oscillations of Saturn could excite resonant density and bending waves in the inner C-ring. They hypothesized that certain wave features discovered by Rosen et al. (1991) that were not associated with known satellite resonances could be the result of such resonant interactions with the planetary oscillation modes. They also predicted that if this was the case the waves would be found to be density (and not bending) waves by Cassini and predicted the azimuthal wave number of the C-ring waves m. Employing Cassini VIMS stellar occultation data Hedman and Nicholson (2013) have now confirmed the predictions and demonstrated that at least some of the C-ring features identified by Rosen et al. are indeed likely caused by resonant oscillation modes of Saturn. Given this context we have taken a fresh look at the Saturn ring seismology. First we propose that an apparent bending wave denoted 'j' by Rosen may be a second order outer vertical resonance with the l=3, m=2 f-mode of Saturn and discuss the locations of other plausible second order resonances in the rings. Since only a handful of ring resonances have been identified, measuring even one or two additional planetary mode frequencies would substantially assist the process of inverting mode frequencies to constrain Saturn interior's structure. Using the available mode frequencies, modern inversion technique employed in stellar seismology, and a recent set of Saturn interior models we provide an initial estimation of what available mode frequencies are telling us about the interior structure of the planet. Since the f-modes are confined relatively closely to the planetary surface, most of the observed modes probe only the outermost layers of the planet that are already comparatively well understood. However the l = 2 mode does probe relatively deeply into the planet and we will discuss the potential the measurement of this mode frequency has for placing new constraints on the interior structure.

Seismogram↗
NASA NTRS2015

Planetary Seismology

Of the many geophysical means that can be used to probe a planet's interior, seismology remains the most direct. In addition to Earth, seismometers have been installed on Venus, Mars, and the Moon. Given that the seismic data gathered on the Moon (now over 40 years ago) revolutionized our understanding of the Moon and are still being used today to produce new insight into the state of the lunar interior, it is no wonder that many future missions, both real and conceptual, plan to take seismometers to other planets. To best facilitate the return of high-quality data from these instruments, as well as to further our understanding of the dynamic processes that modify a planet's interior, various modeling approaches are used to quantify parameters such as the amount and distribution of seismicity, tidal deformation, and seismic structure of the terrestrial planets. In addition, recent advances in wavefield modeling have permitted a renewed look at seismic energy transmission and the effects of attenuation and scattering, as well as the presence and effect of a core, on recorded seismograms. In this talk I will discuss some of these methods and review the history of planetary seismology.

planetary seismology↗
NASA NTRS1966

General seismology

Seismological instrumentation, earthquake and nuclear explosion detection, and engineering construction applications

RECORDING INSTRUMENT↗
NASA NTRS1979

Planetary seismology and interiors

This report briefly summarizes knowledge gained in the area of planetary seismology in the period 1969-1979. Attention is given to the seismic instruments, the seismic environment (noise, characteristics of seismic wave propagation, etc.), and the seismicity of the moon and Mars as determined by the Apollo missions and Viking Lander experiments, respectively. The models of internal structures of the terrestrial planets are discussed, with the earth used for reference.

Toksoz, M. N.↗
NASA NTRS1980

Data User's Note: Apollo seismological investigations

Seismological objectives and equipment used in the passive seismic, active seismic, lunar seismic profiling, and the lunar gravimeter experiments conducted during Apollo 11, 12, 14, 15, 16, and 17 missions are described. The various formats in which the data form these investigations can be obtained are listed an an index showing the NSSDC identification number is provided. Tables show manned lunar landing missions, lunar seismic network statistics, lunar impact coordinate statistics, detonation masses and times of EP's, the ALSEP (Apollo 14) operational history; compressed scale playout tape availability, LSPE coverage for one lunation, and experimenter interpreted events types.

Vostreys, R. W.↗
NASA NTRS1981

Lunar seismology - The internal structure of the moon

It is pointed out that seismology has provided the most detailed information concerning the structure and state of the earth's interior. Beginning in 1969, seismometers were landed on the moon by the Apollo missions, providing the first opportunity to attempt similar studies on another planetary body. In September 1977 the operation of these instruments was terminated. A description is presented of the internal structure of the moon, as determined from the obtained lunar seismic data. The analysis of the lunar data is approached in a systematic fashion, using appropriate techniques to minimize the number of necessary assumptions, extract the maximum amount of structural information, and determine its reliability. The completed lunar seismic network consists of four stations located at the landing sites of Apollo missions 12, 14, 15, and 16. Attention is given to crustal structure, the structure of the lunar mantle, the attenuating region, and the core.

Goins, N. R.↗
NASA NTRS1984

Overview of Solar Seismology: Oscillations as Probes of Internal Structure and Dynamics in the Sun

The physical nature of solar oscillations is reviewed. The nomenclature of the subject and the techniques used to interpret the oscillations are discussed. Many of the acoustic and gravity waves that can be observed in the atmosphere of the Sun are actually resonant or standing modes of the interior; precise measurements of the frequencies of such modes allow deductions of the internal structure and dynamics of this star. The scientific objectives of such studies of solar seismic disturbances, or of solar seismology, are outlined. The reasons why it would be very beneficial to carry out further observations of solar oscillations both from ground based networks and from space will be discussed.

Toomre, J.↗
NASA NTRS1995

The seismology of eta Bootes

Some p-mode frequencies and other observations were used to determine the mass, the age and the helium abundance of eta Bootes. It is shown how, by direct application, the p-mode frequencies and stellar seismological tools help in constraining the physical parameters of eta Boo. The existence of mode bumping is confirmed and it is discussed how it may be used to refine the estimate of the eta Boo's age. The effect of the OPAL equation of state on the p-mode frequencies is described.

Demarque, Pierre↗
NASA NTRS1995

Active region seismology

Active region seismology is concerned with the determination and interpretation of the interaction of the solar acoustic oscillations with near-surface target structures, such as magnetic flux concentration, sunspots, and plage. Recent observations made with a high spatial resolution and a long temporal duration enabled measurements of the scattering matrix for sunspots and solar active regions to be carried out as a function of the mode properties. Based on this information, the amount of p-mode absorption, partial-wave phase shift, and mode mixing introduced by the sunspot, could be determined. In addition, the possibility of detecting the presence of completely submerged magnetic fields was raised, and new procedures for performing acoustic holography of the solar interior are being developed. The accumulating evidence points to the mode conversion of p-modes to various magneto-atmospheric waves within the magnetic flux concentration as being the unifying physical mechanism responsible for these diverse phenomena.

Bogdan, Tom↗
NASA NTRS1997

Seismological procedures for ZZ Ceti stars and an application to G 117-B15A

In this paper, we outline the procedure for seismological analysis of the ZZ Ceti stars, which are pulsating white dwarfs with hydrogen atmospheres. We use G 117-B15A as the example for this process and derive constraints on the mass and internal structure. The hydrogen layer mass is either about 10(-4)M* or 10(-7)M* depending on whether the l = 1 mode near 215 s is k = 2 or k = 1, respectively. In both cases, the best fitting mass is 0.60M solar, in agreement with spectroscopic log g values.

Bradley, P. A.↗
NASA NTRS2014

Modeling Approaches in Planetary Seismology

Of the many geophysical means that can be used to probe a planet's interior, seismology remains the most direct. Given that the seismic data gathered on the Moon over 40 years ago revolutionized our understanding of the Moon and are still being used today to produce new insight into the state of the lunar interior, it is no wonder that many future missions, both real and conceptual, plan to take seismometers to other planets. To best facilitate the return of high-quality data from these instruments, as well as to further our understanding of the dynamic processes that modify a planet's interior, various modeling approaches are used to quantify parameters such as the amount and distribution of seismicity, tidal deformation, and seismic structure on and of the terrestrial planets. In addition, recent advances in wavefield modeling have permitted a renewed look at seismic energy transmission and the effects of attenuation and scattering, as well as the presence and effect of a core, on recorded seismograms. In this chapter, we will review these approaches.

Weber, Renee↗
NASA NTRS2020

Cluster Analysis of Thermal Icequakes Using the Seismometer to Investigate Ice and Ocean Structure (SIIOS): Implications for Ocean World Seismology

Ocean Worlds are of high interest to the planetary community due to the potential habitability of their subsurface oceans. Over the next few decades several missions will be sent to ocean worlds including the Europa Clipper, Dragonfly, and possibly a Europa lander. The Dragonfly and Europa lander missions will carry seismic payloads tasked with detecting and locating seismic sources. The Seismometer to Investigate Ice and Ocean Structure (SIIOS) is a NASA PSTAR funded project that investigates ocean world seismology using terrestrial analogs. The goals of the SIIOS experiment include quantitatively comparing flight-candidate seismometers to traditional instruments, comparing single-station approaches to a small-aperture array, and characterizing the local seismic environment of our field sites. Here we present an analysis of detected local events at our field sites at Gulkana Glacier in Alaska and in Northwest Greenland approximately 80 km North of Qaanaaq, Greenland. Both field sites passively recorded data for about two weeks. We deployed our experiment on Gulkana Glacier in September 2017 and in Greenland in June 2018. At Gulkana there was a nearby USGS weather station which recorded wind data. Temperature data was collected using the MERRA satellite. In Greenland we deployed our own weather station to collect temperature and wind data. Gulkana represents a noisier and more active environment. Temperatures fluctuated around 0°C, allowing for surface runoff to occur during the day. The glacier had several moulins, and during deployment we heard several rockfalls from nearby mountains. In addition to the local environment, Gulkana is located close to an active plate boundary (relative to Greenland). This meant that there were more regional events recorded over two weeks, than in Greenland. Greenland’s local environment was also quieter, and less active. Temperatures remained below freezing. The Greenland ice was much thicker than Gulkana (~850 m versus ~100 m) and our stations were above a subglacial lake. Both conditions can reduce event detections from basal motion. Lastly, we encased our Greenland array in an aluminum vault and buried it beneath the surface unlike our array in Gulkana where the instruments were at the surface and covered with plastic bins. The vault further insulated the array from thermal and atmospheric events.

Marusiak, A. G.↗