Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “seismograms”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Challenges and Opportunities in Turning Large U.S. Archives of Analog Seismograms into a Modern Usable Resource

Abstract Quantitative seismology is based firmly on the analysis of actual ground motions, and the transition to digital recording in the 1980s enabled sophisticated new capabilities to extract useful results from waveforms. With some effort, these tools can also be applied to analog records. Focusing on assets available within U.S. institutions, we review the necessary steps and the challenges in enabling “data rescue”—that is, preserving the scientific information latent in large analog seismogram archives and making it usable. They include: determining what assets are available (the analog seismogram archives held by various institutions, with associated metadata on instrument responses, station locations, and timing information); developing a consensus on the top level of a triage process (which analog records most definitely should be rescued?); deciding the level of quality needed in copying original seismograms to media suitable for digitizing; assessing the relative merits of scanning and digitizing; and, the need for a community service in distributing scans and digital records, as they accumulate. The necessary level of effort can benefit from practical experience. For example, specific studies have used digitized versions of analog recordings to model earthquake sources and assess seismic hazard. Other studies have used them to gain experience with nuclear explosion signals recorded at regional distances, noting that regional signals enable explosions to be monitored down to levels much lower than those attainable teleseismically. The opportunities presented by large archives of analog seismograms include the insights they present to current and future seismologists studying earthquakes and explosions, into the practical areas of assessing seismic hazard, monitoring for test ban compliance down to low explosion yields—and prompt characterization of actual explosions should they occur, as well the traditional academic pursuit of a better understanding of earthquake physics.

Geochemistry & Geophysics↗
DOE OSTI2016

A Multi­Discipline Approach to Digitizing Historic Seismograms

Retriever Technology has developed and has made available free of charge a seismogram digitization software package called SKATE (Seismogram Kit for Automatic Trace Extraction). We have developed an extensive set of algorithms that process seismogram image files, provide editing tools, and output time series data. The software is available online and free of charge at seismo.redfish.com. To demonstrate the speed and cost effectiveness of the software, we have processed over 30,000 images.

47 OTHER INSTRUMENTATION↗
DOE OSTI2016

Fast computation of synthetic seismograms within a medium containing remote localized perturbations: a numerical solution to the scattering problem

We derive a fast discrete solution to the scattering problem. This solution allows us to compute accurate synthetic seismograms or waveforms for arbitrary locations of sources and receivers within a medium containing localized perturbations. The key to efficiency is that wave propagation modelling does not need to be carried out in the entire volume that encompasses the sources and the receivers but only within the subvolume containing the perturbations or scatterers. The proposed solution has important applications, for example, it permits the imaging of remote targets located in regions where no sources or receivers are present. Our solution relies on domain decomposition: within a small volume that contains the scatterers, wave propagation is modelled numerically, while in the surrounding volume, where the medium isn't perturbed, the response is obtained through wavefield extrapolation. The originality of this work is the derivation of discrete formulas for representation theorems and Kirchhof–Helmholtz integrals that naturally adapt to the numerical scheme employed for modelling wave propagation. Our solution applies, for example, to finite difference methods or finite/spectral elements methods. The synthetic seismograms obtained with our solution can be considered ‘exact’ as the total numerical error is comparable to that of the method employed for modelling wave propagation. We detail a basic implementation of our solution in the acoustic case using the finite difference method and present numerical examples that demonstrate the accuracy of the method. We show that ignoring some terms accounting for higher order scattering effects in our solution has a limited effect on the computed seismograms and significantly reduces the computational effort. Finally, we show that our solution can be used to compute localized sensitivity kernels and we discuss applications to target oriented imaging. Extension to the elastic case is straightforward and summarized in a dedicated section.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2015

A digital seismogram archive of nuclear explosion signals, recorded at the Borovoye Geophysical Observatory, Kazakhstan, from 1966 to 1996

Seismologists from Kazakhstan, Russia, and the United States have rescued the Soviet-era archive of nuclear explosion seismograms recorded at Borovoye in northern Kazakhstan during the period 1966–1996. The signals had been stored on about 8000 magnetic tapes, which were held at the recording observatory. After hundreds of man-years of work, these digital waveforms together with significant metadata are now available via the project URL, namely http://www.ldeo.columbia.edu/res/pi/Monitoring/Data/ as a modern open database, of use to diverse communities. Three different sets of recording systems were operated at Borovoye, each using several different seismometers and different gain levels. For some explosions, more than twenty different channels of data are available. A first data release, in 2001, contained numerous glitches and lacked many instrument responses, but could still be used for measuring accurate arrival times and for comparison of the strengths of different types of seismic waves. The project URL also links to our second major data release, for nuclear explosions in Eurasia recorded in Borovoye, in which the data have been deglitched, all instrument responses have been included, and recording systems are described in detail. This second dataset consists of more than 3700 waveforms (digital seismograms) from almost 500 nuclear explosions in Eurasia, many of them recorded at regional distances. It is important as a training set for the development and evaluation of seismological methods of discriminating between earthquakes and underground explosions, and can be used for assessment of three-dimensional models of the Earth’s interior structure.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
NASA NTRS1984

A simple derivation of the formula to calculate synthetic long-period seismograms in a heterogeneous earth by normal mode summation

A simple modification of Gilbert's formula to account for slight lateral heterogeneity of the earth leads to a convenient formula to calculate synthetic long period seismograms. Partial derivatives are easily calculated, thus the formula is suitable for direct inversion of seismograms for lateral heterogeneity of the earth. Previously announced in STAR as N83-29893

Tanimoto, T.↗
DOE OSTI2025

Denoising Seismograms in the Time Domain Using a Deep Learning Model

Deep learning has emerged as a transformative tool for enhancing the extraction of reliable information from seismograms, addressing the increasing demand for precise and efficient seismic data analysis. We introduce an innovative encoder–decoder deep learning model, named WaveDenoiser, designed for noise reduction in the time domain, thereby eliminating the need for spectrogram computations that have been used for existing deep learning tools and significantly improving processing speed. Utilizing the benchmark dataset that is Stanford Earthquake Dataset, we developed three models of varying sizes: base, medium, and large. Notably, the large (referred to as WaveDenoiser) model demonstrated superior performance, achieving a median signal‐to‐noise ratio improvement of 8.8 dB on in‐distribution unseen data (in the same geographic region) and 7.7 dB on out‐distribution unseen data (in a new geographic region), outpacing both the base and medium models. Further evaluation of the WaveDenoiser model revealed a reduction in median arrival‐time errors by 0.02 s for P waves and 0.01 s for S waves when processing waveforms prior to phase picking using PhaseNet on in‐distribution unseen data. When tested on out‐distribution unseen data, the model also effectively reduced the P‐wave median arrival‐time error by 0.02 and 0.01 s in median arrival‐time error for S waves. Importantly, the application of WaveDenoiser resulted in a significant reduction of phase picking outliers by 1.1% to 3.6% for both P and S waves. In addition, we achieved over five times acceleration in processing speed compared with the seisBench implementation of DeepDenoiser. Our findings underscore the potential of WaveDenoiser as a powerful tool for improving seismic data analysis and processing efficiency.

P-waves↗
DOE OSTI2012

Development of earthquake early warning system using real time signal of broadband seismogram

Earthquake pose serious threat of live and properties for urban area near subduction zone offshore and active fault on land. Jakarta and Bandung is an example of big city that no system of Earthquake early warning (EEW) event very high urbanization, and has many important infra structure in the area. The capital city is potentially high risk ground shaking. EEW can be usefull tool for reducing earthquake hazard, if spatial relation between cities and earthquake source is favorable for such warning and their citizens are properly trained to response early warning message. An EEW and rapid response system can provide the critical information needed to minimized lost of live and property and direct rescue. Earthquake ground shaking with magnitude M>6.0 from zone of Megathrust, southern of West Java should potentially damage in the area of west java especially Bandung and Jakarta City. This research development of EEW parameter such as amplitude displacement (Pd), rapid magnitude determination (M) and Peak ground Velocity (PGV). We explore the practical approach to EEW with the use of Broadband seismogram signal. Time effective EEW which epicenter from megathrust zone has potential to provide EEW in the area of west java such as Jakarta first ground shaking more or less 60 second later and strong shaking 118 second after EEW Alarm on CISI Station. EEW notification at potentially damage in the area of west java can be predicted from the characteristic of Pd > 0.5 cm, M> 6 and PGV > 10 cm/sec. GIS as a tool for presentation of hazard mapping in the affected area.

58 GEOSCIENCES↗
DOE OSTI2025

Simulating High-Frequency Seismograms in Realistic Earth Models to Better Understand Source Discrimination Based on Differential Magnitudes ( M L− M c)

Discriminating low-yield underground nuclear explosions from small earthquakes is a key task in monitoring nuclear test ban treaties. P/S amplitude ratios have been an effective discriminant for moderate-sized events recorded at regional distances, but it is unclear if they are as effective in discriminating small seismic events recorded at local distances (<150 km). The difference between local magnitude (M L ) and coda duration magnitude (M c ) has been proposed as a new discriminant that may complement P/S amplitude ratios at local distances. Here, in this work, we calculate high-frequency (up to ∼4 Hz) synthetic seismograms at epicentral distances of 0–30 km in realistic models of the Salt Lake basin (Utah, United States) to better understand how variations in source type and depth affect M L −M c values. The Earth models incorporate simplified 1D and deterministic 3D structures, small-wavelength stochastic velocity perturbations, and surface topography. Coda waves are enhanced for the more complicated models compared to the base 1D model, but still underpredict observed durations by about a factor of two, which results in overprediction of amplitude to duration ratios (i.e., M L −M c values) for a near-surface explosion and a 7 km deep earthquake. For both source types, the predicted M L and M c values decrease as source depth increases, and M L −M c shows only minor variation with depth; however, M L −M c is on average ∼0.5 units smaller for explosions than earthquakes. This finding may imply that M L −M c has sensitivity to source type, in addition to being a depth discriminant, but more modeling is needed given the limitations of the current study. Future modeling should incorporate higher-frequency (≳5 Hz) simulations over a larger distance range (0–150 km), where M L and M c are commonly measured, while honoring low shear velocities (<300 m/s) near the surface and sampling a wider range of earthquake and explosion source mechanisms.

Hutchings, Sean J. [Univ. of Utah, Salt Lake City,↗
NASA NTRS1977

The use of surface reflections in lunar seismograms

The use of polarization filters is demonstrated on lunar seismograms. Body-wave arrivals from artificial impacts are identified as surface reflections, which may be used for improving our knowledge of the lunar interior or to relocate surface events if an approximate location is known as well as an approximate model.

Jarosch, H. S.↗
NASA NTRS1979

The damping of seismic waves and its determination from reflection seismograms

The damping in theoretical waveforms is described phenomenologically and a classification is proposed. A method for studying the Earth's crust was developed which includes this damping as derived from reflection seismograms. Seismic wave propagation by absorption, attenuation of seismic waves by scattering, and dispersion relations are considered. Absorption of seismic waves within the Earth as well as reflection and transmission of elastic waves seen through boundary layer absorption are also discussed.

Engelhard, L.↗
NASA NTRS1982

Correction of lunar seismograms for instrumental and near-surface effects and constraints on the velocity structure of the lunar interior

Long-period lunar seismograms were studied with the aim of identifying consistent sets of direct shear and secondary wave arrivals, thus constraining the velocities in the lunar mantle and the depths of the velocity discontinuities. Two velocity models were used to locate the natural impacts and the shallow moonquakes and to obtain the travel time residuals. Seismic sections were made of the radial, transverse, and vertical components of ground motion for impacts, shallow, and deep moonquakes in order to search for consistent sets of secondary wave arrivals. No conclusive set of secondary arrivals could be recognized on the seismic sections and thus the velocities and depths of the velocity discontinuities cannot be severely constrained by secondary arrivals. It is likely that the crust is thinner than 50 km and that a first-order discontinuity separates the upper and lower crust at a depth of between 20 and 30 km.

Horvath, P.↗
NASA NTRS2013

Saturn Ring Seismology: Interpreting the Seismogram

Marley (1990) and Marley and Porco (1993) proposed that f-mode oscillations of Saturn could excite resonant density and bending waves in the inner C-ring. They hypothesized that certain wave features discovered by Rosen et al. (1991) that were not associated with known satellite resonances could be the result of such resonant interactions with the planetary oscillation modes. They also predicted that if this was the case the waves would be found to be density (and not bending) waves by Cassini and predicted the azimuthal wave number of the C-ring waves m. Employing Cassini VIMS stellar occultation data Hedman and Nicholson (2013) have now confirmed the predictions and demonstrated that at least some of the C-ring features identified by Rosen et al. are indeed likely caused by resonant oscillation modes of Saturn. Given this context we have taken a fresh look at the Saturn ring seismology. First we propose that an apparent bending wave denoted 'j' by Rosen may be a second order outer vertical resonance with the l=3, m=2 f-mode of Saturn and discuss the locations of other plausible second order resonances in the rings. Since only a handful of ring resonances have been identified, measuring even one or two additional planetary mode frequencies would substantially assist the process of inverting mode frequencies to constrain Saturn interior's structure. Using the available mode frequencies, modern inversion technique employed in stellar seismology, and a recent set of Saturn interior models we provide an initial estimation of what available mode frequencies are telling us about the interior structure of the planet. Since the f-modes are confined relatively closely to the planetary surface, most of the observed modes probe only the outermost layers of the planet that are already comparatively well understood. However the l = 2 mode does probe relatively deeply into the planet and we will discuss the potential the measurement of this mode frequency has for placing new constraints on the interior structure.

Seismogram↗