Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “scale of effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Cavitation erosion size scale effects

Size scaling in cavitation erosion is a major problem confronting the design engineers of modern high speed machinery. An overview and erosion data analysis presented in this paper indicate that the size scale exponent n in the erosion rate relationship as a function of the size or diameter can vary from 1.7 to 4.9 depending on the type of device used. There is, however, a general agreement as to the values of n if the correlations are made with constant cavitation number.

Rao, P. V.↗
NASA NTRS1978

Scale effects on supercritical airfoils

A survey of research relative to scale effects on supercritical airfoils has been conducted. The results of this survey indicated that Reynolds number scale effects have a significant impact on airfoil design and performance. Further, this impact is greater for supercritical airfoils than for conventional airfoils. It was found that low Reynolds number drag data could be extrapolated to high Reynolds number conditions provided the flow was attached and the pressure distribution shape did not change appreciably. Airfoil lift and pitching-moment data obtained at low Reynolds numbers cannot be extrapolated to full-scale values. Viscous theoretical transonic analysis methods currently under development will significantly improve the ability of the designer to account for scale effects. Boundary-layer manipulation in low Reynolds number facilities using natural transition or aft located transition strips to simulate high Reynolds number conditions was shown to be an uncertain test procedure and reliance should be made on high Reynolds number facilities if available.

Blackwell, J. A., Jr.↗
NASA NTRS1989

Scaling effects in the static large deflection response of graphite-epoxy composite beams

Scaling effects in the large deflection response of graphite-epoxy composite beams was investigated. Eight different scale model beams ranging from 1/6 to full-scale were subjected to an eccentric axial compressive load to promote large bending deformations and failures. Beams having laminate stacking sequences including unidirectional, angle ply, cross ply, and quasi-isotropic were tested to examine a wide variety of composite response and failure modes. The model beams were loaded under scaled test conditions until catastrophic failure. Data acquired included load, end displacement, and strain measurements, and qualitative failure measurements. The experimental data is compared to a large rotation beam analysis and a finite element model analysis. Results from the tests indicate that the beam response becomes nonlinear. Failure modes are consistent between scale models within a laminate family, however, a significant scale effect is observed in strength of the scaled beams.

Jackson, Karen E.↗
NASA NTRS1982

Size scale effect in cavitation erosion

An overview and data analyses pertaining to cavitation erosion size scale effects are presented. The exponents n in the power law relationship are found to vary from 1.7 to 4.9 for venturi and rotating disk devices supporting the values reported in the literature. Suggestions for future studies were made to arrive at further true scale effects.

Rao, P. V.↗
NASA NTRS1981

Experimental studies of scale effects on oscillating airfoils at transonic speeds

Scale effects are discussed with reference to a conventional airfoil (NACA 64A010) and a supercritical airfoil (NLR 7301) at mean flow conditions that support both weak and strong shock waves. During the experiment the Reynolds number was varied from 3 x 10 to the sixth power at time history data are presented over the range of reduced frequencies that are important in aeroelastic applications. The experimental data show that viscous effects are important in the case of the supercritical airfoil at all flow conditions and in the case of the conventional airfoil under strong shock wave conditions. Some frequency dependent viscous effects were also observed.

Davis, S. S.↗
NASA NTRS1988

Scaling effects in the static large deflection response of graphite-epoxy composite beams

In the present investigation of scaling effects in the large-deflection response of graphite/epoxy composite beams, eight model beams ranging from 1/6 to full scale in size were subjected to an eccentric axial compressive load promoting large bending deformations and failures; the beams encompassed unidirectional, angle-ply, cross-ply, and quasi-isotropic types. The data obtained pertains to loads, end-displacements, strain measurememts, and qualitative failure measurements. Test results indicate that beam responses scale in the small-deflection region, but deviate as the response becomes nonlinear.

Jackson, Karen E.↗
NASA NTRS1978

Unsteady loads due to propulsive lift configurations. Part D: The development of an experimental facility for the investigation of scaling effects on propulsive lift configurations

The design and construction of an experimental facility for the investigation of scaling effects in propulsive lift configurations are described. The facility was modeled after an existing full size NASA facility which consisted of a coaxial turbofan jet engine with a rectangular nozzle in a blown surface configuration. The flow field of the model facility was examined with and without a simulated wing surface in place at several locations downstream of the nozzle exit plane. Emphasis was placed on obtaining pressure measurements which were made with static probes and surface pressure ports connected via plastic tubing to condenser microphones for fluctuating measurements. Several pressure spectra were compared with those obtained from the NASA facility, and were used in a preliminary evaluation of scaling laws.

Haviland, J. K.↗
NASA NTRS1990

Erosive Augmentation of Solid Propellant Burning Rate: Motor Size Scaling Effect

Two different independent variable forms, a difference form and a ratio form, were investigated for correlating the normalized magnitude of the measured erosive burning rate augmentation above the threshold in terms of the amount that the driving parameter (mass flux or Reynolds number) exceeds the threshold value for erosive augmentation at the test condition. The latter was calculated from the previously determined threshold correlation. Either variable form provided a correlation for each of the two motor size data bases individually. However, the data showed a motor size effect, supporting the general observation that the magnitude of erosive burning rate augmentation is reduced for larger rocket motors. For both independent variable forms, the required motor size scaling was attained by including the motor port radius raised to a power in the independent parameter. A boundary layer theory analysis confirmed the experimental finding, but showed that the magnitude of the scale effect is itself dependent upon scale, tending to diminish with increasing motor size.

Strand, L. D.↗
NASA NTRS1981

Scale effects on turbulent boundary layer development and flow separation around V/STOL inlets at high incidence

Numerical methods for calculating laminar and turbulent boundary layers development around V/STOL engine inlets at high incidence angles, along with the procedures for predicting flow separation, are presented. Results of scale-effects, which are obtained by a numerical scaling procedure on the boundary layer characteristics and incidence angles at onset of separation are discussed. The interesting 'cross-over' phenomena, where the full-scale models actually exhibit earlier separation than the scaled-models, is illustrated for a typical V/STOL inlet at a certain operating condition. Some of the numerical results are compared with the existing wind-tunnel test data for a 1/6 scale inlet model to demonstrate the validity of the numerical approach.

Chou, D. C.↗
NASA NTRS1980

Experimental studies of scale effects on oscillating airfoils at transonic speeds

Experimental data are presented on the effect of Reynolds number on unsteady pressures induced by the pitching motion of an oscillating airfoil. Scale effects are discussed with reference to a conventional airfoil (NACA 64A010) and a supercritical airfoil (NLR 7301) at mean-flow conditions that support both weak and strong shock waves. During the experiment the Reynolds number was varied from 3,000,000 to 12,000,000 at a Mach number and incidence necessary to induce the required flow. Both fundamental frequency and complete time history data are presented over the range of reduced frequencies that is important in aeroelastic applications. The experimental data show that viscous effects are important in the case of the supercritical airfoil at all flow conditions and in the case of the conventional airfoil under strong shock-wave conditions. Some frequency-dependent viscous effects were also observed.

Davis, S. S.↗
NASA NTRS1925

Propeller scale effect and body interference

This note shows that the main part of the discrepancy between full flight propeller performance and the performance of models in a wind tunnel is due to a scale effect, and that a minor part is caused by body interference. Analyses are made of propeller performances on several standard airplanes, and the actual brake horsepower compared with the power as calculated from model test data. The calculated power is based on that absorbed by a wind tunnel propeller model which is geometrically similar to the full scale propeller and is operating under the same ratio of V/nD.

Weick, Fred E↗
NASA NTRS1937

The Scale Effect in Towing Tests with Airplane-float Systems

The present report includes a description of the making of three-component measurements on a full-size float mounted on an actual airplane and the comparison of the results with those from two models of the same form but of different size which had been tested in the towing tank. The purpose of the comparison is to determine the effect of the Reynolds Number on the results of model tank tests. Following a brief discussion of previous tests intended to elucidate the problem of scale effect on float systems and a description of the testing equipment, the choice of the reference quantities to be used in the comparison is discussed. The selection of load, speed, and trim as a basis of comparison seems best suited to the practical operation of making this comparison. The quantities affected by scale are then: resistance, trimming moment, and their derivatives; planing number (resistance/weight on water); and position of center of pressure.

Schmidt, Rudolph↗
NASA NTRS1972

Limited cavitation and the related scale effects problem.

It is indicated that the study of limited cavitation can be divided into two parts, namely, the factors which influence the pressure field, and those which influence the bubble dynamics. Major aspects of cavitation nuclei and bubble dynamics are summarized. An analysis is presented of the effects of velocity, size and fluid properties, including the thermodynamic effect. The effects of turbulence, roughness and polymer additives are presented. These include new data on roughness and estimates of the effects of turbulence and polymer additives on jets. An analysis of nonvaporous cavitation with new data on vortex cavitation is presented. Implications concerning scale effects are given.

Holl, J. W.↗