Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “renewable diesel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Techno-economic Analysis and Life-Cycle Analysis of Renewable Diesel Fuels Produced with Waste Feedstocks

Wet waste feedstocks represent an important category of resources that could be utilized to produce biofuels. Diversion of the wet waste resources from going through conventional waste management practices to utilization as feedstocks for energy production also benefits from avoided cost and pollutant emissions of waste management and disposal. This study investigates the economic and environmental implications of producing bio-blendstocks for mixing controlled compression ignition (MCCI) engines from two waste-to-fuel pathways: hydroprocessed esters and fatty acids (HEFA) from yellow grease, and swine manure hydrothermal liquefaction (HTL) followed by biocrude upgrading. Detailed process models were developed for both pathways, which informed the techno-economic analysis (TEA) and life-cycle analysis (LCA). Conventional swine manure management practice was also modeled in detail as the business-as-usual (BAU) scenario for the swine manure HTL pathway. The estimated minimum fuel selling prices (MFSP) were $4.47/gasoline gallon equivalent (GGE) and $3.57/GGE for the yellow grease to HEFA and swine manure HTL pathways, respectively. The life-cycle greenhouse gas (GHG) emissions of the two pathways were 11.2 and -33.3 g CO2e/MJ, respectively, for the yellow grease to HEFA and swine manure HTL pathways. The credits of avoided emissions from conventional swine manure management were the main reason for the negative GHG emissions of the swine manure HTL pathway. The marginal GHG emissions abatement costs were estimated to be $100 – $253/tonne CO2e and $5 – $103/tonne CO2e for the yellow grease HEFA and swine manure HTL pathways, respectively, for a diesel price ranging between $2.0/GGE and $3.5/GGE. Since the yellow grease HEFA pathway is already commercialized, it can benefit from the $200/tonne carbon credit in the California Low Carbon Fuel Standard (LCFS) market, which could help the yellow grease HEFA pathway to achieve near-zero marginal GHG emissions abatement cost.

renewable diesel, techno economic analysis, life c↗
DOE OSTI2026

Biochemical Conversion of Herbaceous Biomass to Renewable Diesel: Biorefinery Marginal Air Quality Impacts and Comparison to Feedstock Production

This study assesses the air quality impacts of an advanced biorefinery that produces renewable diesel blendstock (RDB) from lignocellulosic biomass via aerobic respiration (Davis et al. 2022) by estimating fine particulate matter (PM2.5) impacts from biorefinery emissions. It continues a prior analysis that used a geospatial assessment to identify source regions for biomass feedstocks and studied the impact of feedstock production emissions on air quality (Thind et al. 2022). Thind et al. (2022) identified RDB biorefineries that can use corn stover feedstocks of 2,000; 5,200; and 9,100 dry metric tons per day (DMT/day), based in Iowa, and suggested 7 unique counties can serve as hosts for a biorefinery that draws biomass feedstock from neighboring counties. Given 13 unique county-biorefinery size combinations and two waste lignin end uses at the biorefinery (lignin as a fuel for electricity generation and lignin for pellet production), the air-quality-related sustainability aspects of each of these 26 scenarios are assessed by estimating the annual average impacts of biorefinery emissions on the dispersion and formation of secondary PM2.5 in the atmosphere using a novel reduced-complexity air quality model called the Intervention Model for Air Pollution (InMAP). The 26 biorefinery design combinations help capture how a biorefinery's emissions of air pollutants and their resulting impact on local and regional air quality are influenced by the magnitude of production scale, lignin utilization strategy, and location of a proposed biorefinery. Methods developed in Thind et al. (2022) are applied to estimate the constraints on primary PM2.5 and secondary PM2.5 precursor emissions based on compliance with U.S. Environmental Protection Agency's (EPA's) annual primary National Ambient Air Quality Standard (NAAQS) of PM2.5 (i.e.12.0 micrograms per cubic meter (microgram/m3)) at downwind receptors of a biorefinery. Incremental PM2.5 concentrations caused by the emission of biorefining corn stover into RDB are assessed and compared to those of corn stover production. To illuminate which upstream supply chain stage of renewable diesel production contributes most to air quality impacts, marginal PM2.5 concentrations are compared between both stages at multiple downwind air quality monitor locations. In addition, through a hotspot analysis, we identify the primary contributing factors of emissions within the feedstock production and biorefinery stage operations. In doing so, we provide insights for improving the air pollutant emission-related sustainability of advanced lignocellulosic biofuel production.

09 BIOMASS FUELS↗
DOE OSTI2017

Demonstration of Parallel Algal Processing: Production of Renewable Diesel Blendstock and a High-Value Chemical Intermediate

Co-production of high-value chemicals such as succinic acid from algal sugars is a promising route to enabling conversion of algal lipids to a renewable diesel blendstock. Biomass from the green alga Scenedesmus acutus was acid pretreated and the resulting slurry separated into its solid and liquor components using charged polyamide induced flocculation and vacuum filtration. Over the course of a subsequent 756 hours continuous fermentation of the algal liquor with Actinobacillus succinogenes 130Z, we achieved maximum productivity, process conversion yield, and titer of 1.1 g L-1 h-1, 0.7 g g-1 total sugars, and 30.5 g L-1 respectively. Succinic acid was recovered from fermentation media with a yield of 60% at 98.4% purity while lipids were recovered from the flocculated cake at 83% yield with subsequent conversion through deoxygenation and hydroisomerization to a renewable diesel blendstock. This work is a first-of-its-kind demonstration of a novel integrated conversion process for algal biomass to produce fuel and chemical products of sufficient quality to be blend-ready feedstocks for further processing.

09 BIOMASS FUELS↗
DOE OSTI2023

Effects of soybean varieties on life-cycle greenhouse gas emissions of biodiesel and renewable diesel

This study presents a life-cycle analysis (LCA) of the greenhouse gas (GHG) emissions of biodiesel (BD) and renewable diesel (RD) produced from soybean varieties with altered oil profiles and meal composition. The varieties evaluated include those with high oleic oil content (78% of oil being oleic oil vs. the current content of 25%), high lipid content (25% vs. the current content of 19%) or high protein content (45% vs. the current content of 35%). The results suggest that high-oleic soybean oil could reduce GHG emissions of RD by 1 g CO 2 e/MJ by reducing hydrogen consumption in the hydro-treating stage of RD production. With the default allocation method (mass-based allocation between oil and meal), changes in lipid and protein contents have negligible impacts on GHG emissions of BD/RD pathways. Since high-protein soybean meal has a higher nutrient value, we employed the market-based allocation for sensitivity analysis. Assuming a market price of $1.17/dry kg and an average of two substitute feeds with similar protein contents (corn gluten and fish meal), the allocation factor for soybean meal increases from 63 to 81%. Compared with the results for the case with commodity soybean using mass allocation, GHG emissions could be 1.9 and 1.8 g CO 2 e/MJ lower for BD and RD, respectively. In addition to product-level LCA, we employed a land-based LCA to evaluate the effect of soybean properties on product slates with the same land area and the associated displacement of conventional products. The results suggest that high-lipid soybeans may offer more GHG savings than other varieties as the higher BD/RD yield replaces more fossil diesel. © 2023 UChicago Argonne, LLC, Operator of Argonne National Laboratory and Northrup, Ag. Biofuels, Bioproducts and Biorefining published by Society of Industrial Chemistry and John Wiley & Sons Ltd.

09 BIOMASS FUELS↗
DOE OSTI2017

Bleaching and Hydroprocessing of Algal Biomass-Derived Lipids to Produce Renewable Diesel Fuel

Algal lipids represent a promising feedstock for production of renewable diesel, but there is little information available regarding the integration of pretreatment, extraction, and catalytic upgrading steps. In this work, we examined oil bleaching by two methods and the effects of bleaching on oil deoxygenation over Pd/C and hydroisomerization over Pt/SAPO-11 catalysts. The raw oil was completely deoxygenated and 90% denitrogenated after dilution to 25 wt % in hexanes. The bleaching operations (using either a polar adsorbent or concentrated H 3 PO 4 ) removed 85-90% of the nitrogen and led to 95-99% nitrogen removal after deoxygenation. Oil processability was also improved by bleaching. Here, the bulk chemistry of the deoxygenation and isomerization was not strongly affected by bleaching, as post-isomerization products with cloud points less than -10 °C and boiling ranges within or close to specification for No. 2 diesel fuel were obtained through 10 h time on stream with or without bleaching.

09 BIOMASS FUELS↗
DOE OSTI2020

Life-cycle energy use and greenhouse gas emissions of palm fatty acid distillate derived renewable diesel

This study aims to quantify life-cycle fossil energy use and greenhouse gas (GHG) emissions for palm fatty acid distillate (PFAD) derived renewable diesel (RD) taking into consideration different feedstock classifications that are applicable to PFAD (residue, byproduct, or coproduct), and incorporating updated data for key processes. Under the three classifications, the PFAD to RD pathway was modeled using the Greenhouse gases, Regulated Emissions, and Energy Use in Technologies (GREET®) model. PFAD-derived RD could reduce fossil energy consumption by 77%–88%, relative to petroleum diesel. GHG emissions are very sensitive to PFAD classification and coproduct handling methods. Considering the production of palm oil and PFAD and economic value, we maintain that PFAD should be treated as a byproduct in palm oil refineries. With this treatment, PFAD-derived RD could achieve 84% GHG emissions reductions, compared to the emissions of petroleum diesel. We also employed a substitution method to address the substitution of PFAD by other materials in the marketplace. Compared to coproduct allocation results, we found substituting PFAD by tallow, soy oil, barley, and canola oil results in lower GHG emissions. Due to high induced land-use change emissions associated with palm farming, if PFAD is treated as a coproduct with refined palm oil, PFAD-derived RD may not deliver GHG reductions. A sensitivity analysis identified key parameters such as palm fruit yield, oil extraction efficiency in oil mills, and energy use intensity for RD production affects LCA results significantly; future efforts to improve these parameters could result in further GHG reductions.

09 BIOMASS FUELS↗
DOE OSTI2023

Renewable Diesel Production through Stand-Alone and Co-Hydrotreating of Catalytic Fast Pyrolysis Oil

Catalytic Fast Pyrolysis (CFP) of biomass followed by hydrotreating can be used for the production of renewable transportation fuels, such as sustainable aviation fuel and renewable diesel, which can reduce the dependence on fossil fuels and help achieve greenhouse gas reduction goals. Stand-alone hydrotreating of CFP oil and co-hydrotreating of the CFP oil with straight-run diesel (SRD) showed potential to produce high-quality diesel products in this study. Stand-alone hydrotreating of CFP oil produced a diesel fraction with oxygen content < 0.1 wt.% and an indicated cetane number (ICN) of 45. Co-hydrotreating of CFP oil and SRD using a 1:4 volumetric ratio produced diesel products with 0.1 wt.% of oxygen and ICNs of 42-45. Compared to CoMo/Al2O3, NiMo/Al2O3 was a more attractive catalyst for co-hydrotreating of two streams, leading to a higher carbon efficiency, a higher selectivity of cycloalkanes, a higher ICN, and enhanced desulfurization. Compared to stand-alone hydrotreating of CFP oil, co-hydrotreating with SRD could be achieved at a less severe operating condition and it produced hydrotreated products with a higher carbon efficiency. Synergy between CFP oil and SRD during co-hydrotreating process was suggested by the better experimental results in comparison with theoretical interpolation results. Co-hydrotreating gave high biogenic carbon incorporations of 91%-97% as determined by C-14 analysis.

biomass↗
DOE OSTI2022

Impact of Biodiesel, Renewable Diesel, 1-Octanol, Dibutoxymethane, n-Undecane, Hexyl hexanoate and 2-Nonanone with Infrastructure Plastics as Blends with Diesel

In this work the volume and hardness were measured for thermoplastics and thermosetting resins with diesel containing up to 30% of the following blend stocks: biodiesel, renewable diesel, n-undecane, dibutoxymethane, 1-octanol, hexyl hexanoate, and 2-nonanone. Thermoplastics included polyphenylene sulfide (PPS), polyethylene terephthalate (PET), polytetrafluoroethylene (PTFE), polyvinylidene fluoride (PVDF), polyoxymethylene (POM), polybutylene terephthalate (PBT), polypropylene (PP), high density polyethylene (HDPE), nylons, acetals, polyetherimide (PEI), polyetheretherketone (PEEK), a PET co-polymer, polyphthalamides (PPAs), polyarylamide (PARA) and ethylene tetrafluoroethylene (ETFE). Three thermosetting resins were also evaluated. The material specimens were exposed to the test fuels under ambient conditions for 16 weeks. In general, the volume and hardness of the specimens were relatively unaffected following exposure to the test fuels; however, n-undecane produced significant swelling in polypropylene and may not be suitable for use with this material. N-undecane, along with hexyl hexanoate and 2-nonanone also caused low levels of swelling in nylon, which was not significant enough to preclude the use of nylons in sealing applications with these fuels.

09 BIOMASS FUELS↗
DOE OSTI2025

Biochemical Conversion of Herbaceous Biomass to Renewable Diesel: Net Greenhouse Gas and Air Pollutant Trade-offs

This study examines greenhouse gas (GHG) and criteria air pollutant (CAP) emissions trade-offs for renewable diesel across 12 scenarios, involving different biochemical conversion designs, biorefinery scales, and feedstocks. A conventional design uses lignin for on-site heat and power, which exports excess power to the grid. An alternative design exports lignin pellets, offsetting other pellet production methods but requiring grid electricity to meet biorefinery power demands. Net emissions were quantified in Iowa and Georgia, selected considering feedstock availability, coproduct displacement, and regional power grids, assuming grid-exported power avoids coal or low-carbon electricity. Results for the conventional design remained consistent across the electricity displacement scenarios. When comparing lignin utilization strategies, pelletizing lignin reduces sulfur dioxide, carbon monoxide, nitrogen oxides, and volatile organic compounds (net emissions –0.66 mg MJ –1 , 25 mg MJ –1 , 25 mg MJ –1 , 7.8 mg MJ –1 , respectively). However, lignin pelletization increases net particulate matter (fine and coarse) and ammonia (net emissions of 4.7 mg MJ –1 , 13 mg MJ –1 , and 0.26 mg MJ –1 , respectively), alongside indirect GHG emissions due to grid electricity dependence. Additionally, processing 2000 tonnes corn stover daily minimizes emissions for both designs. Only lignin pelletization with renewable electricity and additional particulate matter and ammonia controls reduces all CAP and GHG emissions simultaneously.

09 BIOMASS FUELS↗
DOE OSTI2026

Environmental Trade-Offs for a Process Utilizing Aerobic Respiration for Biological Conversion of Cellulosic Biomass-Derived Sugars to Hydrocarbons (Renewable Diesel Blendstock): Cooperative Research and Development Final Report, CRADA Number CRD-18-00765, Project 1

Phase II work is meant to develop an advanced understanding of how production of a renewable diesel blendstock from lignocellulosic biomass feedstocks via aerobic respiration at different production scales affects emissions of criteria pollutants and greenhouse gases (GHGs), local and regional air quality. The results could inform decisions by stakeholders (e.g., industry, community, air quality planners, investors) regarding relationships and tradeoffs between multiple environmental impacts and the challenges and opportunities for the design and deployment of a sustainable biofuel supply chain.

09 BIOMASS FUELS↗
DOE OSTI2025

Robust engineered catalyst for the conversion of brown grease to renewable diesel via decarboxylation/decarbonylation

A novel engineered Ni–Cu/Al 2 O 3 decarboxylation/decarbonylation catalyst achieved quantitative conversion of brown grease, excellent yield of diesel-like hydrocarbons, effective heteroatom removal, and remarkable resistance to deactivation for hundreds of hours on stream. This offers an industrial alternative to hydrotreating for transforming waste oleaginous feedstocks into renewable diesel and sustainable aviation fuel.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Life cycle assessment of novel technologies for algae harvesting and oil extraction in the renewable diesel pathway

There are many challenges and technical barriers to implementation of a viable commercial process to produce algae-based biofuels. Biofuels made from algae must typically go through a complicated series of unit processes for algae cultivation, harvesting, dewatering, oil extraction, conversion, and other logistical steps. The National Alliance for Advanced Biofuels and Bioproducts (NAABB) was developed to produce new technologies to be implemented by the algal biofuel industry in an effort to improve the process economics and environmental benefits associated with algae fuels. This LCA study investigated the environmental impacts associated with four harvesting and two extraction technologies developed by NAABB researchers. Gate-to-gate LCA results show that all novel technologies appear to have the potential to provide at least modest decreases in greenhouse gas (GHG) emissions compared to current default algae process technologies. 14 scenarios of different combinations of harvesting and extraction unit operations were further evaluated in the context of the full life cycle for producing algae-based renewable diesel. Results indicate that selection of a particular technology for a unit operation can have consequences that affect other stages of the full biofuels life cycle, both upstream and downstream from the unit operation in question. Considering material and energy inputs, operation efficiency, impacts on on-site recycled energy, and co-products credits, acoustic harvesting followed by acoustic oil extraction give the best performance on the overall lifecycle, which reduce the GHG emissions by roughly 45% compared to the base case. LCA modeling also demonstrates that co-products produced at various points of the value chain, for use within or outside the algae biofuels system boundary, considerably affect the LCA results beyond harvesting and extraction unit processes.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2019

Renewable diesel via hydrothermal liquefaction of oleaginous yeast and residual lignin from bioconversion of corn stover

A major barrier to profitable bioconversion of cellulosic biomass to hydrocarbon fuel precursors is the difficulty in breaking down feedstock lignin into carbon substrates that can be easily metabolized by industrial microbes. Hydrothermal liquefaction (HTL) of cellulosic biomass effectively breaks down and converts lignin into biocrude oil products, but provides relatively low yields of biocrude from feedstock carbohydrates. In the present study, bioconversion and HTL were integrated into a new hybrid system that employs the best of both processes to produce high quality fuel in high quantity. Bioreactor cultivation of the oleaginous yeast Lypomyces starkeyi produced dry cell mass yields up to 0.43 g/g of sugar and yields of intracellular triglyceride lipids (measured as fatty acid methyl esters) of up to 0.26 g/g of sugar in pretreated corn stover hydrolysate or simulated hydrolysate media. The lipid-rich bioreactor broth was mixed with pretreated corn stover lignin, and then co-fed to an HTL reactor to produce 0.40 g of biocrude oil per gram of feed on a dry weight basis. Optimizing the separation of HTL biocrude and the HTL aqueous phase could significantly increase the biocrude yield. Hydrotreating of the biocrude produced a high quality, renewable hydrocarbon fuel blendstock, with the majority of the product boiling in the distillate range. The estimated cost of production could be reduced to $3/gasoline gallon equivalent through addressing identified research gaps. Our results provide a proof-of-concept for a new hybrid biorefinery design that could enhance domestic production of renewable diesel, jet, and marine fuel in the United States.

Biomass, Continuous hydrothermal liquefaction, Bio↗
DOE OSTI2025

Renewable diesel and bio-aromatics production from waste cooking oil using ethanol as a hydrogen donor in deoxygenation reaction

Biofuels offer a promising solution in the fight against climate change. With a global increase in waste cooking oil, this research investigated the production of bio-hydrogenated diesel (BHD) from waste cooking oil, using ethanol as a hydrogen donor in the deoxygenation process. A hydrolyzed waste cooking oil model compound served as the feedstock, and the deoxygenation was performed at 300–400 °C. The catalysts used in the experiments were 2.6 wt% Ni and 7.8 wt% Mo (2.6Ni-7.8Mo) and 10 wt% Ni and 5 wt% Mo (10Ni-5Mo) on γ-Al 2 O 3 . The results showed that ethanol is an effective hydrogen donor for biofuel production without the need for external hydrogen at an elevated pressure. The increasing temperature enhanced the free fatty acid (FFA) conversion and n-alkane selectivity in the oil product, with the highest FFA conversion and alkane selectivity of 100 % and 46 %, respectively, observed at 400 °C for the sulfided 10Ni-5Mo catalyst. On the other hand, 2.6Ni-7.8Mo offers 100 % FFA conversion with a lower n-alkane selectivity of 35 % at identical temperatures. The total acid number (TAN) of the oil products decreased from 174.03 mg KOH/g of feedstock to 9.43 and 8.67 mg KOH/g with the sulfided 2.6Ni-7.8Mo and 10Ni-5Mo catalysts, respectively. Both the catalysts achieved similar heating values (~43 MJ/kg) at 400 °C. This is a significant improvement to the HHV of the feedstock, which was 36.02 MJ/kg. Additionally, aromatic compounds, mainly BTXE (benzene, toluene, xylene, and ethylbenzene), were also produced. Compared to glycerol as a hydrogen donor, ethanol more effectively increased n-alkane selectivity due to its higher effective hydrogen-to-carbon ratio (H/C eff ). Conversely, glycerol was more advantageous for achieving greater selectivity towards BTXE compounds due to its lower H/C eff , which potentially leads to coke formation. Since aromatic compounds are intermediates in coke production, glycerol provides higher aromatic selectivity than ethanol. Finally, this study presents an alternative pathway for producing diesel fuel from waste cooking oil using ethanol as a hydrogen donor.

36 MATERIALS SCIENCE↗
DOE OSTI2024

SHOCK TUBE IGNITION STUDIES OF RENEWABLE DIESEL FUELS FOR MEDIUM AND HEAVY-DUTY TRANSPORTATION

Currently extensive research on alternative fuels is being conducted due to their increasing demand to reduce greenhouse emissions. One renewable fuel studied in this work is dimethyl ether (DME) blended with propane(C3H8) as a potential mixture for heavy-duty engines used in semi-trucks. The blend has the potential to drastically reduce particulate and greenhouse gas emissions compared to a conventional diesel engine operating under similar conditions. To develop the use of mixture, one must conduct detailed conceptual and simulation studies before progressing to detail studies in CFD, engine modifications, and live testing. For simulations, accurate high-fidelity chemical kinetic models are necessary. However, the validity of the chemical kinetic mechanism for operating conditions of a heavy-duty mixing-controlled compression (MCCI) engine was widely unknown until recent work presented here and published. In this work, we studied the ignition of DME and propane blends in a shock tube under MCCI engine conditions. Ignition delay time (IDT) gathered behind the reflected shock for DME-propane mixtures for heavy-duty compression ignition (CI) engine parameters. Testing was conducted for undiluted varieties spanning from temperatures of 700 to 1100 K at pressures ranging from 55 to 84 bar for various blends (100% CH3OCH3, 100% C3H8, 60% CH3OCH3/ 40% C3H8) of DME and propane were combusted in synthetic air (21% O2/ 79% N2). Several experiments were conducted at higher pressures (90-120 bar) to improve the model performance and accuracy. The ignition delay times (IDTs) were compared to recent mechanisms, including Aramco3.0, NUIG, and Dames et al. A common trend among the mechanisms was overpredicted experimental IDTs. Further studies were conducted by a sensitivity analysis using the Dames et al. model, and critical reactions sensitive to IDTs of DME-propane mixture near 60 bar are outlined. Chemical analysis was conducted on the NTC region to explain chemical kinetics which is critical for developing MCCI heavy duty engines.

Mohammed, Zuhayr Pasha↗