Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “relocation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2023

Assessing the Relocation of Artemis Foundational Lunar Surface Concepts

The National Aeronautics and Space Administration (NASA) has defined a functionally based Moon to Mars (M2M) architecture consisting of four key human exploration segments: human lunar return (HLR), foundational exploration (FE), sustained lunar evolution (SLE), and humans to Mars (H2M). These segments are portions of the architecture which represent a stepwise increase in complexity and achievement of M2M objectives [1]. As systems are deployed during the FE segment, it may be desired or even necessary to relocate these elements on the lunar surface as the architecture transitions into the SLE segment. While some Artemis elements under development, such as rovers, are being designed for mobility during both crewed and uncrewed/dormant periods, other architectural concepts do not currently carry a mobility capability. In preparation for the Agency’s 2023 Architecture Concept Review (ACR), a team was assembled to establish a methodology for assessing the relocation feasibility of normally stationary elements. Such a capability could be applied locally or regionally, and might allow for re-purposing previously occupied terrain, expansion of exploration range, aggregation of habitation elements, or retiring systems at the end of their useful service life. The assembled NASA team investigated the relocation trade space through defining a representative concept of operations (ConOps) and assessing possible system impacts. The team focused predominately on the relocation of medium and large surface habitat architectural concepts through surface-based traverses utilizing separable mobility platforms (SMP). A representative mobility platform model was placed through simulation to analyze the possible energy requirements and dynamic illumination impacts. Preliminary assessment indicated that element relocation might be achievable, however significant system and architectural-level risks still need to be quantified. Future analysis will assist in determining what degree of element relocation provides the greatest benefit to achieving a sustained lunar presence. [1] NASA. (2022). Moon to Mars Objectives. Retrieved from: https://www.nasa.gov/sites/default/files/atoms/files/m2m-objectives-exec-summary.pdf

Artemis↗
NASA NTRSDate not supplied

Assessing the Relocation of Artemis Foundational Lunar Surface Concepts

The National Aeronautics and Space Administration (NASA) has defined a functionally based Moon to Mars (M2M) architecture consisting of four key human exploration segments: human lunar return (HLR), foundational exploration (FE), sustained lunar evolution (SLE), and humans to Mars (H2M). These segments are portions of the architecture which represent a stepwise increase in complexity and achievement of M2M objectives [1]. As systems are deployed during the FE segment, it may be desired or even necessary to relocate these elements on the lunar surface as the architecture transitions into the SLE segment. While some Artemis elements under development, such as rovers, are being designed for mobility during both crewed and uncrewed/dormant periods, other architectural concepts do not currently carry a mobility capability. In preparation for the Agency’s 2023 Architecture Concept Review (ACR), a team was assembled to establish a methodology for assessing the relocation feasibility of normally stationary elements. Such a capability could be applied locally or regionally, and might allow for re-purposing previously occupied terrain, expansion of exploration range, aggregation of habitation elements, or retiring systems at the end of their useful service life. The assembled NASA team investigated the relocation trade space through defining a representative concept of operations (ConOps) and assessing possible system impacts. The team focused predominately on the relocation of medium and large surface habitat architectural concepts through surface-based traverses utilizing separable mobility platforms (SMP). A representative mobility platform model was placed through simulation to analyze the possible energy requirements and dynamic illumination impacts. Preliminary assessment indicated that element relocation might be achievable, however significant system and architectural-level risks still need to be quantified. Future analysis will assist in determining what degree of element relocation provides the greatest benefit to achieving a sustained lunar presence. [1] NASA. (2022). Moon to Mars Objectives. Retrieved from: https://www.nasa.gov/sites/default/files/atoms/files/m2m-objectives-exec-summary.pdf

Artemis↗
NASA NTRS2005

Relocation of Advanced Water Vapor Radiometer 1 to Deep Space Station 55

In June of 2004, the Advanced Water Vapor Radiometer (AWVR) unit no. 1 was relocated to the Deep Space Station (DSS) 55 site in Madrid, Spain, from DSS 25 in Goldstone, California. This article summarizes the relocation activity and the subsequent operation and data acquisition. This activity also relocated the associated Microwave Temperature Profiler (MTP) and Surface Meteorology (SurfMET) package that collectively comprise the Cassini Media Calibration System (MCS).

Oswald, J.↗
NASA NTRS2009

Node 3 Relocation Environmental Control and Life Support System Modification Kit Verification and Updated Status

Node 1 (Unity) flew to International Space Station (ISS) on Flight 2A. Node 1 was the first module of the United States On-Orbit Segment (USOS) launched to ISS. The Node 1 ISS Environmental Control and Life Support (ECLS) design featured limited ECLS capability. The main purpose of Node 1 was to provide internal storage by providing four stowage rack locations within the module and to allow docking of multiple modules and a truss segment to it. The ECLS subsystems inside Node 1 were routed through the element prior to launch to allow for easy integration of the attached future elements, particularly the Habitation Module which was planned to be located at the nadir docking port of Node 1. After Node 1 was on-orbit, the Program decided not to launch the Habitation Module and instead, to replace it with Node 3 (Tranquility). In 2007, the Program became concerned with a potential Russian docking port approach issue for the Russian FGB nadir docking port after Node 3 is attached to Node 1. To solve this concern the Program decided to relocate Node 3 from Node 1 nadir to Node 1 port. To support the movement of Node 3 the Program decided to build a modification kit for Node 1, an on-orbit feedthrough leak test device, and new vestibule jumpers to support the ECLS part of the relocation. This paper provides a design overview of the modification kit, a summary of the Node 1 ECLS re-verification to support the Node 3 relocation from Node 1 nadir to Node 1 port, and a status of the ECLS modification kit installation into Node 1.

Williams, David E.↗
NASA NTRS2010

Node 3 Relocation Environmental Control and Life Support System Modification Kit Verification and Updated Status

Node 1 (Unity) flew to International Space Station (ISS) on Flight 2A. Node 1 was the first module of the United States On-Orbit Segment (USOS) launched to ISS. The Node 1 ISS Environmental Control and Life Support (ECLS) design featured limited ECLS capability. The main purpose of Node 1 was to provide internal storage by providing four stowage rack locations within the module and to allow docking of multiple modules and a truss segment to it. The ECLS subsystems inside Node 1 were routed through the element prior to launch to allow for easy integration of the attached future elements, particularly the Habitation Module which was planned to be located at the nadir docking port of Node 1. After Node I was on-orbit, the Program decided not to launch the Habitation Module and instead, to replace it with Node 3 (Tranquility). In 2007, the Program became concerned with a potential Russian docking port approach issue for the Russian FGB nadir docking port after Node 3 is attached to Node 1. To solve this concern the Program decided to relocate Node 3 from Node I nadir to Node 1 port. To support the movement of Node 3 the Program decided to build a modification kit for Node 1, an on-orbit feedthrough leak test device, and new vestibule jumpers to support the ECLS part of the relocation. This paper provides a design overview of the modification kit for Node 1, a summary of the Node 1 ECLS re-verification to support the Node 3 relocation from Node 1 nadir to Node 1 port, and a status of the ECLS modification kit installation into Node 1.

Williams, David E.↗
NASA NTRS1983

Adaptive grid relocation algorithms for transonic full potential calculations using one-dimensional or two-dimensional diffusion equation

The effect of solution-adaptive grids using an interpolative grid relocation algorithm on two-dimensional transonic full potential flow calculations is studied with extensions to three dimensions in mind. One-dimensional or two-dimensional diffusion equation is solved to obtain the grid density control function for generating adaptive grids. The results of flow solution for NACA-0012 and Gates-Leajet airfoils show a significant improvement of accuracy in the CP distributions. However, further studies are recommended on the questions (1) what information from the initial flow solution should be passed on to the solution-adaptive grid generation scheme, and (2) how to optimize the accuracy of the solution through the use of adaptive grids.

Nakamura, S.↗
NASA NTRS1990

Laser diffraction particle sizing: Instrument probe volume relocation and elongation

The effective probe volume of laser diffraction particle sizing instruments depends on many instrument parameters. In particular the probe volume axial boundaries and its location along laser beam are essentially defined by the onset of a vignetting effect where light scattered at large angles from small particles misses the transform lens. This vignetting effect results in a probe volume that must be inconveniently close to the lens in order to detect smaller diameter particles (less than 100 micrometers). With the addition of an appropriately designed Keplerian telescope, the probe volume may be relocated and elongated. The theory of operation of this supplemental optical system is described. Design considerations for these supplemental optical systems are described, including recommendations for lens specifications, assembly and use. An image transfer system is described which has been designed for use on a Malvern 2600HSD instrument. Experimental validation of this image transfer system is described.

Anderson, Robert C.↗
NASA NTRS1986

Uniform relocation assistance and real property acquisition for Federal and federally-assisted programs

The 'Uniform Relocation Assistance and Real Property Acquisition for Federal and Federally-Assisted Programs' (14 CFR Part 1208) is set forth in this handbook and is hereby incorporated into the NASA Directives System. This handbook is applicable to all NASA installations. An initial supply of this handbook has been furnished to all NASA installations. Additional copies for internal use may be obtained through normal distribution channels.

Source record↗
NASA NTRS1975

The Relocation of Particulate Contamination During Space Flight

A computer simulation program to model the redistribution of particulate contaminants on a spacecraft after launch is developed. The component models for particulate adhesion, meteoroid impact, and electrostatic forces are described and intermediate results are presented. The results of a sample calculation show that the recontamination process is important.

Barengoltz, J.↗
NASA NTRS1981

Relocation of the Deep Space Network Maintenance Center

The Jet Propulsion Laboratory maintains a Deep Space Network (DSN) maintenance center (DMC), whose task is to engineer and manage the repair and calibration program for the electronic and mechanical equipment used in the tracking stations located at Madrid, Spain, and Canberra, Australia. The DMC also manages the Goldstone complex maintenance facility (GCMF), whose task is to repair and calibrate the Goldstone electronic and mechanical equipment. The rationale for moving the facility to Barstow, California, and the benefits derived from the move are discussed.

Beutler, K. F.↗
NASA NTRS1986

Particulate contaminant relocation during shuttle ascent

The dislodgement, venting, and redeposition of particles on a surface in the shuttle bay by the vibroacoustic, gravitational, and aerodynamic forces present during shuttle ascent have been investigated. The particles of different sizes which are displaced, vented, and redistributed have been calculated; and an estimate of the increased number of particles on certain surfaces and the decrease on others has been indicated. The average sizes, velocities, and length of time for certain particles to leave the bay following initial shuttle doors opening and thermal tests have been calculated based on indirect data obtained during several shuttle flights. Suggestions for future measurements and observations to characterize the particulate environment and the techniques to limit the in-orbit particulate contamination of surfaces and environment have been offered.

Scialdone, J. J.↗
NASA NTRS1985

Control of large flexible systems via eigenvalue relocation

For the vibration control of large flexible systems, a control scheme by which the eigenvalues of the closed-loop systems are assigned to predetermined locations within the feasible region through velocity-only feedback is presented. Owing to the properties of second-order lambda-matrices and an efficient model decoupling technique, the control scheme makes it possible that selected modes are damped with the rest of the modes unchanged.

Denman, E. D.↗
NASA NTRS1987

Particulate contaminant relocation during shuttle ascent

The dislodgement, venting, and redeposition of particles on a surface in the shuttle bay by the vibroacoustic, gravitational, and aerodynamic forces present during shuttle ascent have been investigated. The particles of different sizes which are displaced, vented, and redistributed have been calculated; and an estimate of the increased number of particles on certain surfaces and the decrease on others has been indicated. The average sizes, velocities, and length of time for certain particles to leave the bay following initial shuttle doors opening and thermal tests have been calculated based on indirect data obtained during several shuttle flights. Suggestions for future measurements and observations to characterize the particulate environment and the techniques to limit the in-orbit particulate contamination of surfaces and environment have been offered.

Scialdone, John J.↗