Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “reflection data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Scattering behavior of Lunar Lake playa determined from parabola bidirectional reflectance data

Bidirectional reflectance data obtained with the Portable Apparatus for Rapid Acquisition of Bidirectional Observations of Land and Atmosphere instrument at Lunar Lake, Nevada, were analyzed to determine the scattering properties of playas. The data are approximated by a Lambertian function, except at high phase angles in the solar principal plane, where Fresnel reflectance appears to dominate. The data also depart slightly (15 percent) from a Lambertian function at high emission angles in all azimuthal planes. No published photometric model accounts for the observed data. It is hypothesized that the observed scattering behavior is the superposition of volume and surface (Fresnel) scattering mechanisms.

Shepard, Michael K.↗
NASA NTRS1987

Atmospheric correction of NS-001 data and extraction of multiple angle reflectance data sets

The percentage of incident solar flux reflected by a surface is a quantity of considerable interest in remote sensing studies. To calculate reflectance from remotely sensed radiance data some estimate of incident flux is needed. Since simultaneous ground-based radiometric measurements are often not available for observations by aircraft or satellite sensors, a procedure based on modeling atmospheric transmittance and scattering was developed. The primary application is to an aircraft data set collected with the NASA C-130 over the Superior National Forest, Minnesota. Atmospherically corrected multiple angle reflectance data sets and reflectance images are generated for areas of natural forest vegetation. These data and the technique may be useful for studies of the interactions of light with forested canopies.

Strebel, D. E.↗
NASA NTRS1984

Estimation of leaf area index from bidirectional spectral reflectance data by inverting a canopy reflectance model

A technique for estimating the leaf area index from bidirectional canopy reflectance (CR) data, in the infrared region, e.g., in band 4 of a Thematic Mapper (TM), is described. It involves inversion of a CR model which accurately represents the reflectance from the canopy. A method for remotely collecting this CR data using an aircraft based TM is described. The bidirectional CR's, for a black spruce (picea mariana) canopy, for 7 solar/view directions, as measured using this technique, are given. A very preliminary analysis of the data from a point of view of estimating LAI by inversion of a CR model is given. This analysis suggests that for an acceptably accurate estimation of LAI, one will require bidirectional CR's for many more than 7 solar/view directions.

Goel, N. S.↗
DOE OSTI2020

Synthetic-aperture radar (SAR) imaging with range-resolved reflection data

SAR imaging may be performed with range-resolved reflection data, where a spread-spectrum signal, such as a code division multiple access (CDMA) signal, is transmitted instead of a simple frequency chirp. The reflected spread-spectrum signal may be analyzed to gather range-resolved reflection data. Range-resolved reflection data may be gathered at each angular view. This data may be used to construct a more accurate approximation of the Fourier transform of the desired image than can be done by a conventional SAR approach. The image may be reconstructed from this Fourier transform using Fourier inversion techniques similar to those used in conventional SAR approaches. The range-resolved reflection scheme generally requires somewhat more processing to recover the image as compared with conventional SAR systems, but provides a significantly more stable image with less degradation from effects that plague conventional SAR systems. This can eliminate the need for phase coherency altogether and also eliminate “phase drift,” which leads to image distortion. This may be especially well suited for high resolution imaging of relatively large targets.

47 OTHER INSTRUMENTATION↗
NASA NTRS2003

Ocean Color and Evidence of Chlorophyll Signature in the TOMS Minimum Reflectivity Data

Analysis of the TOMS minimum reflectivity data for 380 nm channel (R380) show regions of high reflectivity values (approx. 7 to 8%) over Sargasso Sea in the Northern Atlantic, anti-cyclonic region in the Southern Atlantic, and a large part of the ocean in the Southern Pacific, and low values (5 approx. 6 %) over the rest of the open ocean. Through radiative transfer simulations we show that these features are highly correlated with the distribution of chlorophyll in the ocean. Theoretical minimum reflectivity values derived with the help of CZCS chlorophyll concentration data as input into a vector ocean-atmosphere radiative transfer code developed by Ahmad and Fraser show very good agreement with TOMS minimum reflectivity data for the winter season of year 1980. For the summer season of year 1980, good qualitative agreement is observed in the equatorial and northern hemisphere but not as good in the southern hemisphere. Also, for cloud-free conditions, we find a very strong correlation between R340 minus R380 values and the chlorophyll concentration in the ocean. Results on the possible effects of absorbing and non-absorbing aerosols on the TOMS minimum reflectivity will also be presented. The results also imply that ocean color will affect the aerosol retrieval over oceans unless corrected.

Ahmad, Z.↗
DOE OSTI2019

Utah FORGE: Seismic Reflection Data

This is 2D and 3D seismic reflection data from Utah FORGE reprocessed during Phase 2c. The readme file containing an explanation of the data including data formats, software that can be used, processing, and projection and datum used. The Reprocessing document gives the rationale for reprocessing and shows examples of the improvements that were obtained. For all 3D and 2D data the following datasets were created and output in SEG-Y format: - Unmigrated Time - Prestack Time Migration (PSTM), Unenhanced (UnEnh) and Enhanced (Enh) - Prestack Depth Migration (PSDM), Unenhanced (UnEnh) and Enhanced (Enh) - Velocity Model used for Migration

15 GEOTHERMAL ENERGY↗
NASA NTRS1991

Surface scattering properties estimated from modeling airborne multiple emission angle reflectance data

Here, researchers apply the Hapke function to airborne bidirectional reflectance data collected over three terrestrial surfaces. The objectives of the study were to test the range of natural surfaces that the Hapke model fits and to evaluate model parameters in terms of known surface properties. The data used are multispectral and multiple emission angle data collected during the Geologic Remote Sensing Field Experiment (GRSFE) over a mud-cracked playa, an artificially roughened playa, and a basalt cobble strewn playa at Lunar Lake Playa in Nevada. Airborne remote sensing data and associated field measurements were acquired at the same time. The airborne data were acquired by the Advanced Solid State Array Spectroradiometer (ASAS) instrument, a 29-spectral band imaging system. ASAS reflectance data for a cobble-strewn surface and an artificially rough playa surface on Lunar Lake Playa can be explained with the Hanke model. The cobble and rough playa sites are distinguishable by a single scattering albedo, which is controlled by material composition; by the roughness parameter, which appears to be controlled by the surface texture and particle size; and the symmetry factor of the single particle phase function, which is controlled by particle size and shape. A smooth playa surface consisting of compacted, fine-grained particles has reflectance variations that are also distinct from either the cobble site or rough playa site. The smooth playa appears to behave more like a Lambertian surface that cannot be modeled with the Hapke function.

Guinness, Edward A.↗
NASA NTRS2000

BOREAS TE-8 Aspen Bark Spectral Reflectance Data

The BOREAS TE-08 team collected in-lab spectral reflectance data for aspen bark and leaves from three sites within the BOREAS SSA from 24-May-1994 to 16-Jun-1994 (IFC 1), 19-Jul-1994 to 08-Aug-1994 (IFC 2), and 30-Aug-1994 to 19-Sep-1994 (IFC 3). One to nine trees from each site were sampled during the three IFCs. Each tree was sampled in five different locations for bark spectral properties: BS, US, BR, BT, and BO. Additionally, a limited number of LV were collected. Bark samples were removed from the stem of the tree and placed in ziplock bags for transport to UNH, where they were scanned with a spectroradiometer in a controlled environment. Each sample was scanned twice: the first set of measurements was made with the bark surface moistened, and the second set was made with the bark surface air-dried for a period of 30 minutes. These data represent continuous spectra of bark reflectance. Each sample was scanned three times, rotating the sample when possible. The reported values for each sample are an average over the three scans. The data are provided in tabular ASCII files. The data files are available on a CD-ROM (see document number 20010000884), or from the Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC).

Hall, Forrest G.↗
NASA NTRS1973

Analysis of partial-reflection data from the solar eclipse of 10 Jul. 1972

Partial-reflection data collected for the eclipse of July 10, 1972 as well as for July 9 and 11, 1972, are analyzed to determine eclipse effects on D-region electron densities. The partial-reflection experiment was set up to collect data using an on-line PDP-15 computer and DECtape storage. The electron-density profiles show good agreement with results from other eclipses. The partial-reflection programs were changed after the eclipse data collection to improve the operation of the partial-reflection system. These changes were mainly due to expanded computer hardware and have simplified the operations of the system considerably.

Bean, T. A.↗
NASA NTRS1991

A pointable, helicopter-based remote sensing data acquisition system for collecting bidirectional reflectance data

Discussed here is a new configuration of a helicopter-borne remote sensing system to support field measurements programs such as studies of forest decline damage associated with atmospheric deposition and the Forest Ecosystems Dynamics project. In this new configuration, the sensor payload is mounted externally on a hinged pallet located on the starboard side of the Bell Iroquois UH-1B (HUEY) helicopter. The sensor payload includes a set of bore-sighted instruments consisting of a Barnes Modular Multiband Radiometer (MMR), a Spectron Engineering (SE) 590 spectroradiometer, an Everest infrared temperature sensor, and a Sony CCD video camera with a 10x zoom lens. The system was tested and excellent data was acquired in 1990.

Williams, Darrel L.↗
NASA NTRS1987

Extraction of spectral hemispherical reflectance (albedo) of surfaces from nadir and directional reflectance data

A radiative transfer model is used to investigate how the error of spectral hemispherical reflectance data obtained from nadir reflectance values varies with wavelength, solar zenith angle, leaf area index, and leaf orientation distribution. Several techniques employing multiple off-nadir view angles taken in azimuth planes are found to accurately infer spectral hemispherical reflectances, and to be well suited to sensor systems that scan in a known azimuth plane or view fore and aft in a known azimuth plane. The effects of errors in hemispherical reflectance on terrestrial energy budget and productivity calculations is also considered.

Kimes, D. S.↗
NASA NTRS1988

Estimation of canopy parameters for inhomogeneous vegetation canopies from reflectance data. III - TRIM: A model for radiative transfer in heterogeneous three-dimensional canopies

A model for radiative transfer in heterogeneous three-dimensional canopies such as those found in forests is proposed. Its use in estimating important biophysical variables such as leaf area index and canopy architecture from bidirectional canopy reflectance data is discussed. The model and its use in estimating canopy parameters through its inversion are validated with measured canopy reflectance data for corn canopies.

Goel, Narendra S.↗
NASA NTRS2000

BOREAS RSS-19 1994 Seasonal Understory Reflectance Data

The BOREAS RSS-19 team collected airborne remotely sensed images and ground reflectance data for characterizing the radiometric properties of the boreal forest landscape. One objective of BOREAS is to further the understanding of the spectral bidirectional reflectance of typical boreal ecosystem stands in the visible/near-infrared regime. An essential input for any canopy BRDF model is an accurate estimate of the average understory reflectance, both for sunlit and shaded conditions. These variables can be expected to vary seasonally because of species-dependent differences in the phenological cycle of foliar display. In response to these requirements, the average understory reflectance for the flux tower sites of both the NSA (Thompson, Manitoba) and the SSA (Candle Lake, Saskatchewan) was observed throughout the year during five field campaigns. This was done by measuring the nadir reflectance (400 to 850 nm) of sunlit and shaded understory (vegetation and snow cover) along a surveyed LAI transect line (Chen, RSS-07) at each site near solar noon and documenting an average site reflectance. Comparisons between sites reveal differences in the green and infrared regions of the spectra, because of the differing species in the understory for each site. Temporal (seasonal) variation for each site was also observed (06-Feb-1994 to 16-Sep-1994), indicating the changing flora mixtures and changing spectral signatures as the understory matures during the growing season. The data are stored in tabular ASCII files. The data files are available on a CD-ROM (see document number 20010000884) or from the Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC).

Miller, John R.↗
DOE OSTI2020

Code to map Xray reflectivity data from real space to reciprocal space

Code to map X-ray reflectivity data from real space to reciprocal space. The code is written as a Jupyter notebook. Example data are included as a separate file (example_data.csv). These data were collected on a Panalytical XRD system. As a first step, run all cells in the notebook. Opportunities are identified for users to make their own choices for choosing the boundaries of the region of interest to estimate background. A simple algorithm is used to estimate background from the outer regions of the data collection region, interpolating the result inside the region of interest. The background is removed and then the data mapped to Qx-Qz (reciprocal space) coordinates. The results are written as NumPy binary and Matlab formatted files.

Fitzsimmons, Michael [Oak Ridge National Lab. (ORN↗
DOE OSTI2019

JGR_Data_Reflection_Project

This research data is based upon the work supported by the U.S. Department of Energy, Office of Basic Energy Sciences, under Award Number DE‐SC0019117. Additional support provided by Colorado School of Mines is highly appreciated.

58 GEOSCIENCES↗
NASA NTRS1978

Mare basalt types on the front side of the moon - A summary of spectral reflectance data

A unit map of nearside basalt types has been prepared from all telescopic spectral reflectance data currently available for lunar soils. Four parameters were chosen (UV/VIS ratio, albedo, 1 micron band strength, 2 micron band strength) to distinguish and map each of 13 mare basalt types and three additional volcanic groups. Multispectral imagery and albedo maps were used to define unit boundaries while spectra were used to examine the 1 and 2 micron bands and calibrate and quantify the multispectral images. Although the volume of each basalt type is not known, it is clear from the unit map that only 1/3 to 1/2 of the surface basalt types are likely to be represented in the returned lunar samples. For mature lunar soils a single parameter alone does not provide chemical information, but when the four are used together, TiO2 and in some cases FeO can be estimated. Further study of the mineralogy of unsampled lunar basalts requires precise spectra to 2.5 microns with higher spectra and spatial resolution.

Pieters, C. M.↗