SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Recyclability of wind blades has garnished a lot of attention over the past decade. This presentation focuses on two recyclable resins systems that are suitable to wind blade manufacturing. A comparison the their material performance, handling, and recyclability is discussed.
Abstract Glass fiber‐reinforced polymer composites are widely used in marine applications, including renewable energy devices and submarines, due to their strength‐to‐weight ratios and corrosion resistance. As sustainability becomes more important, recyclable thermoplastic composites are gaining attention in marine energy applications. These materials face harsh conditions such as high chloride water, UV radiation, pressurization, and thermal cycling, which can affect their durability and recyclability. This study examines the impact of hygrothermal aging on the recyclability of an Elium glass fiber (GF) composite. Samples were mechanically ground for recycling, and mechanical and thermal properties were compared between aged and unaged samples. After seawater aging, the tensile strength and modulus of the unaged composite dropped by 25% and 13% respectively, due to water ingress along the fiber‐matrix interface. The recycled composite showed reduced flexural strength as the long fiber composite was converted into short fibers during the process. Differential scanning calorimetry (DSC) revealed no change in glass transition temperature after aging. Weight loss (25%) was attributed to the thermal stability of the glass fibers. Dynamic mechanical analysis (DMA) showed that the storage modulus increased with aging, and fracture analysis confirmed a mixed mode of failure for aged composites. Highlights Hygrothermal aging lowers mechanical performance of Elium® GF composites. Failure mechanism tends to be matrix cracking and interface bonding. Glass transition temperature is not reduced by hygrothermal aging. Fractured composite was successfully recycled via thermoforming. Flexural strength of the recycled composite is lower.
Proposal Objectives: 1. Utilize depolymerization/fractionation techniques to recover highly processable and reactive feedstocks for polymer synthesis from lignin. 2. Synthesize lignin‐derived non‐isocyanate polyurethane, epoxy, and polyamide using non‐ toxic, biobased route designed for chemical recycling. Characterize resulting materials. 3. Design a high‐yielding chemical recycling process for as‐synthesized materials yielding usable building blocks for many generations of polymer synthesis. 4. Optimize chemical recycling of PET waste for the synthesis of lignin‐based polymers. Compare properties to commercial materials. 5. Optimize reaction conditions and recycling steps to facilitate enhanced sustainability of the synthetic steps and final properties of materials. 6. Complete a lifecycle assessment of lignin utilization and chemical recycling to compare their environmental performance to that of materials produced from virgin material. Identify hot spots and benefits using the chemical recycling process.
The rapid growth of the carbon fiber-reinforced polymer (CFRP) composite market has driven researchers to find value-added applications for outdated prepregs, manufacturing scraps, and end-of-life components. Currently, most CFRP waste is incinerated or landfilled, which squanders its residual value and burdens the environment. Various mechanical, thermal, and chemical approaches have been attempted to recover the carbon fiber, polymer matrix, or both. However, these current practices are often costly, energy-intensive, and generate secondary waste and pollution. To address these shortcomings, this project aims to develop a viable and sustainable chemical recycling technology for CFRP waste that can efficiently and cost-effectively decompose the polymer matrix and manufacture new recyclable composites from both the recovered carbon fiber (rCF) and decomposed matrix polymer (DMP).
The U.S. investments in building this new wind energy capacity will not only mobilize millions of tons of raw and processed materials in existing supply chains, some of which are critical materials, but also create new types and large volumes of end-of-life (EOL) waste streams. Building efficient, cost-effective, and environmentally responsible EOL management infrastructure of wind energy system components is pivotal in diverting upcoming volumes of waste stream from landfills, recovery of critical materials and reducing life cycle emissions from production of primary commodity materials . The primary goal of this report is to organize and communicate findings from this assessment on how alternate materials, designs and manufacturing processes could enable more efficient, cost-effective, and environmentally responsible disassembly and resource recovery from wind energy technologies. The findings of this assessment could inform prioritization of RD&D investment spending to meet Energy Act of 2020 directions. This assessment focused on key RD&D recommendations for three main temporal phases: Short-term (2023-2026), medium-term (2026 through 2035) and long-term (beyond 2035).
Abstract Cumulative silicon photovoltaic (PV) waste highlights the importance of considering waste recycling before the commercialization of emerging PV technologies 1,2 . Perovskite PVs are a promising next-generation technology 3 , in which recycling their end-of-life waste can reduce the toxic waste and retain resources 4,5 . Here we report a low-cost, green-solvent-based holistic recycling strategy to restore all valuable components from perovskite PV waste. We develop an efficient aqueous-based perovskite recycling approach that can also rejuvenate degraded perovskites. We further extend the scope of recycling to charge-transport layers, substrates, cover glasses and metal electrodes. After repeated degradation–recycling processes, the recycled devices show similar efficiency and stability compared with the fresh devices. Our holistic recycling strategy reduces by 96.6% resource depletion and by 68.8% human toxicity (cancer effects) impacts associated with perovskite PVs compared with the landfill treatment. With recycling, the levelized cost of electricity also decreases for both utility-scale and residential systems. This study highlights unique opportunities of perovskite PVs for holistic recycling and paves the way for a sustainable perovskite solar economy.
Complex oxide thin films cover a range of physical properties and multifunctionalities that are critical for logic, memory, and optical devices. Typically, the high‐quality epitaxial growth of these complex oxide thin films requires single crystalline oxide substrates such as SrTiO 3 (STO), MgO, LaAlO 3 , a‐Al 2 O 3, and many others. Recent successes in transferring these complex oxides as free‐standing films not only offer great opportunities in integrating complex oxides on other devices, but also present enormous opportunities in recycling the deposited substrates after transfer for cost‐effective and sustainable processing of complex oxide thin films. In this work, the surface modification effects introduced on the recycled STO are investigated, and their impacts on the microstructure and properties of subsequently grown epitaxial oxide thin films are assessed and compared with those grown on the pristine substrates. Detailed analyses using high‐resolution scanning transmission electron microscopy and geometric phase analysis demonstrate distinct strain states on the surfaces of the recycled STO versus the pristine substrates, suggesting a pre‐strain state in the recycled STO substrates due to the previous deposition layer. These findings offer opportunities in growing highly mismatched oxide films on the recycled STO substrates with enhanced physical properties. Specifically, yttrium iron garnet (Y 3 Fe 5 O 12 ) films grown on recycled STO present different ferromagnetic responses compared to that on the pristine substrates, underscoring the effects of surface modification. The study demonstrates the feasibility of reuse and redeposition using recycled substrates. Via careful handling and preparation, high‐quality epitaxial thin films can be grown on recycled substrates with comparable or even better structural and physical properties toward sustainable process of complex oxide devices.
We assess the economics of repurposing and recycling electric vehicle (EV) batteries by estimating the maximum acquisition price repurposers and recyclers could pay for used EV packs across cathode chemistries, first-life conditions, second-life applications, and recycling processes. We develop a novel open-source process-based cost model of a UL-1974-certified repurposing facility and leverage battery degradation models to estimate the maximum acquisition price repurposers could pay for used EV batteries while producing second-life battery energy storage systems with life-adjusted costs equivalent to new systems. We compare these maximum price estimates to maximum prices for recyclers based on cost and revenue estimates from the EverBatt model. We find that repurposing is more economical than recycling for lithium iron phosphate (LFP) batteries, due to their relatively long life and low value materials; recycling is generally more economical than repurposing for lithium nickel cobalt aluminum oxide (NCA) batteries, due to their shorter life and higher value materials; and the economics for lithium nickel manganese cobalt oxide (NMC) batteries depend more heavily on first life retirement conditions and second life application intensity. These results suggest an overall strategy: reuse LFP, recycle NCA, and sort NMC into recycling or repurposing pathways based on state of health and second-life application.
Approximately 100 million tons of multilayered plastics (MLPs) are produced each year worldwide but are not recycled due to their complex structure. Here, this work aims to design polyester-based multilayer plastics (80–100 % polyester) that provide barrier performance comparable to typical 9–12-layer commercial MLPs, while also enabling both chemical recycling (back to parent monomer) and mechanical recycling (grind-and-melt reprocessing). Such dual recyclability is not achievable with non-polyester multilayers, such as all-polyolefin systems. Furthermore, we emphasize how the multilayer architecture was tailored to balance barrier properties, mechanical integrity, and end-of-life recyclability for both flexible and rigid packaging applications. Two main categories of polyester-based MLPs are reported; in the first type, poly(butylene adipate-co-terephthalate) (PBAT)-70 % polyglycolic acid (PGA) is used as middle barrier layer, while in second type, middle barrier layer is Ethylene-vinyl alcohol (EVOH) copolymers. Polyethylene terephthalate (PET) was used as a structural layer, while either PBAT or poly(butylene succinate) (PBS) was used to enable thermal sealing and serve as the product contact layer. These MLPs are recycled by both chemical and mechanical recycling processes. Techno-economic analysis (TEA) shows that MLPs incorporating EVOH as barrier layer have similar or lower selling costs (0.32 $\$$/m 2 ) than commercial MLPs. Life cycle assessment (LCA) indicates EVOH-based MLPs have a lower carbon footprint and lower energy consumption relative to commercial MLP benchmarks. This work offers simplified MLPs that are easy to manufacture and ready to recycle, which will significantly reduce environmental impact of MLP packaging while also providing a cost-effective and practical solution for industry.
Millions of metric tons of textiles are landfilled or incinerated each year in the United States, with less than 1% of textiles recycled into new clothing or fabrics. To counter this trend, a growing number of companies and researchers are exploring how a circular economy can be applied to support textile‐to‐textile recycling. A significant barrier they face comes down to quickly and efficiently extracting pure feedstock material from post‐consumer garments that feature a mix of natural and synthetic fibers. Textile recyclers prefer pure feedstocks, as working with mixed sources typically means lower throughput, higher risk of equipment failure, and diminished business margins. To facilitate a circular economy for textiles, methods, and technologies are needed that can efficiently separate out materials and contaminants from end‐of‐life textiles to increase the flow of pure feedstocks to recyclers. This paper summarizes findings from interviews with a cross section of textile recyclers and from a review of literature to define basic feedstock requirements. In addition to our qualitative research, we deconstruct a bale of post‐consumer textiles and analyze them using computer‐vision imaging, Fourier transform infrared spectroscopy (FTIR), and machine learning. The resulting data are used to set system‐level design inputs for an automated contaminant removal system to process post‐consumer clothing into appropriate feedstocks for recycling. To set the system's levels for automated real‐time near‐infrared analysis, we identify the minimum percentage of primary material that any single garment in a load of used clothing must contain for the average of the full output stream to meet the target purity levels of recyclers. Here, the envisioned automated system can also address undesirable trace materials that might contaminate the processed stream by using imaging cameras coupled with artificial intelligence to identify sections of clothing for de‐trimming. Proof‐of‐concept machine learning algorithms are evaluated to locate and identify trims or garment areas with hidden contaminant materials. Integrating these methods into automated textile cutting systems can provide a cost‐effective means for increasing feedstock purity from used clothing, which can advance circularity for textiles by helping recyclers to reach production volumes and quality targets that were not possible solely with manual dismantling operations.
With the rapid expansion of transportation electrification worldwide, the demand for electric vehicles (EVs) has increased dramatically, creating new and sustainable growth opportunities for the global economy. However, as the most expensive component of EVs, lithium-ion batteries pose significant sustainability challenges due to raw material consumption and supply chain constrains, as well as the complexities of end-of-life battery disposal and recycling. To address these concerns, many countries are actively establishing regulations to promote sustainable pathways for battery reuse and recycling. Despite these efforts, existing battery recycling regulations remain often inefficient and vary significantly across different countries in legal enforcement, producer responsibility, waste classification, recycling targets, design standards, public engagement, and financial incentives, particularly given the complexities of the global supply chain and resource distribution within the battery industry. Understanding these regulatory differences and establishing a unified framework are therefore crucial to ensuring sustainable and efficient battery recycling. This review provides a comprehensive analysis of the necessity of establishing robust regulations for sustainable development of battery recycling industry. The evolution and refinement of battery recycling regulations are deeply reviewed to identifying persistent gaps and challenges in key countries. Furthermore, we discuss the challenges associated with regulatory enforcement and propose strategies for developing a more cohesive legislative framework to ensure the effective utilization of retired batteries.
Recycling end-of-life lithium-ion batteries (LIBs) to recover high-value cathode materials such as LiNixMnyCozO2 (NMC) is driven by economical, geopolitical, and sustainability needs. There has been recent interest in direct recycling methods to improve efficiency and recovery of materials, including ionothermal, hydothermal, solid-state, or redox mediator methods. In conjunction with recycling process development, detailed structural characterization is necessary in order to understand the mechanisms and efficacy of cathode recycling steps. Solid-state nuclear magnetic resonance (NMR) spectroscopy is a unique tool that can probe Li coordination, bulk and surface environments, and transition metal ordering in recycled and upcycled NMC cathodes. Here, 6,7Li, 1H, and 19F NMR spectroscopy to probe structural and compositional changes as well as surface impurities that may form during each step in NMC direct recycling is utilized. During relithiation, Li reinsertion into the NMC lattice is observed. During upcycling, where the goal is to increase the Ni content in the NMC, incorporation of Ni-rich phases into the bulk Li environment is observed. Surface impurities formed during processing were also identified. These studies provide valuable information for optimizing recycling processes to reach targeted cathode composition and structure that can enable electrochemical performance comparable to or better than pristine materials.
Plastic waste management has become a topic of increasing public interest due to the growing amount of plastic waste entering landfills, being combusted, or being leaked into the environment due to mismanagement. The portion of plastic products that is currently recycled remains low (< 9 % in the U.S.). This is driven by numerous factors including infrastructure and collection needs to improve the recycling rate of plastic waste, technological constraints in recycling the wide variety of plastic products associated with the diverse range of (non-transparent) formulations, and economic limitations for recycling plastic and using recycled plastic in new plastic products (e.g., consumer incentives to recycle, economic value of recycled plastic). The relative importance of these factors is not well understood, and each requires additional research.
The increasing demand for sustainable battery technologies requires effective recycling strategies for end-of-life lithium-ion battery cathodes. In this study, virtual materials testing, a well-established framework for modeling conventionally manufactured NMC-based cathodes, is applied to partially recycled cathodes. To this end, virtual cathodes consisting of mixtures of pristine and recycled NMC particles are utilized to systematically analyze structure–property relationships depending on mixing ratios and different spatial arrangement strategies. For this purpose, a stochastic 3D model is developed that is capable of generating virtual cathodes with arbitrary volume fractions of active materials and mixing ratios of pristine and recycled NMC particles. Particularly, the stochastic 3D model can mimic the different size distributions of pristine and recycled particles that are observed in image data. Additionally, the model allows the structuring of pristine and recycled NMC either uniformly mixed or layer-wise arranged, mimicking single- and dual-layer cathodes. Subsequently, a systematic computational analysis is conducted to assess the influence of increasing active material ratios of recycled particles, ranging from 0 % to 100 %, while maintaining a constant overall active material volume fraction. The impact of particle mixing on cathode performance is evaluated by examining transport-relevant geometrical descriptors and effective properties, such as geodesic tortuosity, specific surface area, and tortuosity factor.
Abstract Polypropylene (PP) is one of the most widely used plastics, yet its recycling remains limited, with less than 1% of solid waste PP being reprocessed. Mechanical recycling through extrusion is the most practical method, but inconsistent reprocessing conditions introduce variability in material properties. While temperature, screw speed, and residence time influence the thermomechanical stress applied during reprocessing, there are no standardized guidelines for optimizing these parameters. This study examines how these factors shape the properties of recycled PP, using conditions designed to mimic post‐industrial recycled (PIR) scrap. Residence time was measured using colorimetric tracking and correlated with molecular weight, viscosity, and mechanical properties over multiple extrusion cycles. Data‐driven modeling, including response surface methodology, support vector machines, and artificial neural networks, identified processing temperature as the dominant factor in material degradation, followed by residence time. Mechanical properties remained stable, while viscosity decreased predictably with increasing residence time. By linking reprocessing conditions to property evolution, this study provides a method to optimize processing parameters and reduce variability in recycled PP. These findings help manufacturers improve process control, making recycled PP more predictable for reuse in manufacturing. Highlights Study of PIR‐quality PP without additives or compatibilizers. Residence time analysis shows processing temperature drives PP property changes. Mark‐Houwink enables quick molecular weight checks for quality control. Models predict mechanical and rheological shifts in reprocessing. Optimized processing parameters minimize property degradation in recycling.
Polypropylene (PP) comprises 21% of global plastics production and 18% of plastics waste, yet less than 1% of solid-waste PP is recycled in the United States (U.S.), representing significant environmental and economic challenges. Mechanical recycling, the most prevalent recycling method, subject's materials to thermomechanical stresses, which typically degrade polymer properties, affecting the quality of polymer products. This study replicates the impact of mechanical recycling through multiple extrusion cycles to examine the effects on PP's processing behavior. Dynamic scanning calorimetry (DSC) measurements showed stable melting behavior across all processing conditions, while crystallization analysis exhibited consistent shifts in kinetic parameters. Rheological characterization demonstrated progressive viscosity reductions through successive cycles, particularly pronounced at elevated reprocessing temperatures. Here, the integration of this experimental data into injection molding simulations showed that recycled PP maintains viable processing characteristics. Our findings establish quantitative correlations between processing history and material behavior, enabling optimization of processing parameters directly rather than relying on trial-and-error approaches. While these results reflect idealized recycling conditions with minimal contamination, they provide a framework for understanding fundamental property evolution during mechanical recycling.
Nanowire arrays present many unique advantages for solar-to-chemical energy conversion. One possible advantage is that photon recycling between neighboring nanowires has the potential to increase solar energy conversion efficiencies. Here, in this work, we explore three underlying mechanisms of optical and electronic coupling between neighboring nanowires─incident photon scattering, photon recycling, and charge-carrier transport from the photoexcited nanowire to the neighboring nanowire via the underlying substrate─using single nanowire-level microscopy and spectroscopy measurements. We present a comprehensive analysis of light absorption and emission of a single nanowire at open circuit, and subsequent re-absorption and re-emission by a neighboring nanowire. We developed a novel correlated single nanowire microspectroscopy and widefield imaging methodology to spatially resolve photon communication pathways between neighboring nanowires and selectively image re-emitted and reflected photons. We developed unique multiphysics models to couple wave optics and semiconductor photophysics to especially isolate contributions from photon recycling and electronic transport to photon emission from neighboring nanowires. By systematically varying the morphologies of the nanowires modeled, we identified pathways to maximize photon recycling between neighboring nanowires. We concluded that the measured photoluminescence is more strongly influenced by the diffusion of charge carriers as compared to photon recycling in materials with moderate-to-large charge-carrier mobilities (>10 cm 2 V –1 s –1 ), and that photon recycling dictates photoluminescence intensity only when the charge-carrier mobility is low (<1 cm 2 V –1 s –1 ). The experimental and simulation platforms developed herein for photon management strategies can be leveraged by the semiconductor photocatalysis community to enhance solar-to-chemical conversion efficiencies in semiconductor nanowire arrays.
Reversible epoxies using the Diels–Alder chemistry enables recycling processes through depolymerizing the polymer at higher temperature and then repolymerizing upon cooling. Compared to conventional bulk heating, photothermal heating can save time and resource and, consequently, reduce costs to reach an elevated temperature for recycling processes of the reversible epoxies. In previous studies, self‐healing of cracks and reattachments of two broken pieces have been presented using a laser; however, recycling of a sample as a whole is not feasible by using such a point light source. Herein, complete recycling processes are demonstrated utilizing an area light source, i.e., sunlight. Reversible epoxies are incorporated with carbon black and refractory plasmonic titanium nitride nanoparticles (NPs). Under concentrated (10 times) sunlight, they can generate sufficient heat (≈140 °C) to completely liquefy, reprocess, and reshape the samples multiple times. Recycling processes are validated by evaluation of mechanical properties for each cycle. Using an integrated experimental and theoretical approach, photothermal performance is investigated in terms of the dispersion and loading of photothermal NPs in the matrix, as well as the sample thickness. In this study, an insight is provided into the design of polymer/photothermal nanomaterial composites which can be sustainably recycled using abundant solar energy.