Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “reactions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Understanding and promoting the reaction kinetics of photothermally driven Diels–Alder reaction with minimized side reactions

The thermoreversible Diels–Alder (DA) reaction involving furan and maleimide precursors has been extensively exploited to develop reversible thermosets for circular economy and additive manufacturing. Recently, applications of photothermal nanoparticles, which can absorb light and generate nanoscale heat, have gained significant attention in driving the Diels–Alder (DA) reaction more efficiently. This approach can be utilized by various applications, for example, solar light-enhanced recycling, self-healing at targeted area, and photothermal 3-D printing. Here, in this work, we address an important fundamental question on the photothermal approach: how does the reaction kinetics of the photothermally driven DA reaction compared to that of the conventional heat driven one? We found that the forward DA reaction kinetics varies dramatically depending on a type of heat sources, i.e., light-induced photothermal heat or conventional heat, despite of a similar bulk temperature. We observed that the light-induced photothermal heat significantly enhances the DA reaction rate in comparison to the bulk heating in an inert environment. On the contrary, the photothermally driven forward DA reaction is significantly slower than that of the heat driven reaction in the presence of oxygen. This is attributed to the photoexcited electrons in photothermal nanoparticles that can generate singlet oxygen ( 1 O 2 ) in the presence of visible light. This singlet oxygen may facilitate an endoperoxide side reaction on the furan group, ultimately, retard the DA reaction from the furan group. These results reveal the effectiveness of photothermal nanoparticles in accelerating DA reaction while underscoring the need to minimize oxygen exposure to prevent unfavorable side reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Tracking the reaction networks of acetaldehyde oxide and glyoxal oxide Criegee intermediates in the ozone-assisted oxidation reaction of crotonaldehyde

The reaction of unsaturated compounds with ozone (O 3 ) is recognized to lead to the formation of Criegee intermediates (CIs), which play a key role in controlling the atmospheric budget of hydroxyl radicals and secondary organic aerosols. The reaction network of two CIs with different functionality, i.e. acetaldehyde oxide (CH 3 CHOO) and glyoxal oxide (CHOCHOO) formed in the ozone-assisted oxidation reaction of crotanaldehyde (CA), is investigated over a temperature range between 390 K and 840 K in an atmospheric pressure jet-stirred reactor (JSR) at a residence time of 1.3 s, stoichiometry of 0.5 with a mixture of 1% crotonaldehyde, 10% O 2 , at an fixed ozone concentration of 1000 ppm and 89% Ar dilution. Molecular-beam mass spectrometry in conjunction with single photon tunable synchrotron vacuum-ultraviolet (VUV) radiation is used to identify elusive intermediates by means of experimental photoionization energy scans and ab initio threshold energy calculations for isomer identification. Addition of ozone (1000 ppm) is observed to trigger the oxidation of CA already at 390 K, which is below the temperature where the oxidation reaction of CA was observed in the absence of ozone. The observed CA + O 3 product, C 4 H 6 O 4 , is found to be linked to a ketohydroperoxide (2-hydroperoxy-3-oxobutanal) resulting from the isomerization of the primary ozonide. Products corresponding to the CIs uni- and bi-molecular reactions were observed and identified. A network of CI reactions is identified in the temperature region below 600 K, characterized by CIs bimolecular reactions with species like aldehydes, i.e., formaldehyde, acetaldehyde, and crotonaldehyde and alkenes, i.e., ethene and propene. The region below 600 K is also characterized by the formation of important amounts of typical low-temperature oxidation products, such as hydrogen peroxide (H 2 O 2 ), methyl hydroperoxide (CH 3 OOH), and ethyl hydroperoxide (C 2 H 5 OOH). Detection of additional oxygenated species such as alcohols, ketene, and aldehydes are indicative of multiple active oxidation routes. This study provides important information about the initial step involved in the CIs assisted oligomerization reactions in complex reactive environments where CIs with different functionalities are reacting simultaneously. It provides new mechanistic insights into ozone-assisted oxidation reactions of unsaturated aldehydes, which is critical for the development of improved atmospheric and combustion kinetics models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Observation of d(t,n) α Neutrons Following d(d,p)t Reactions in a Deuterium Gas Cell: An Attempt to Repeat Ruhlig’s 1938 Observation of Secondary Reactions

In order to benchmark methods used to calculate reaction-in-flight fusion reactions in inertial confinement fusion and address issues related to the first claimed observation of d(t,n)α reactions in 1938, secondary d(t,n)α reactions have been observed following d(d,p)t reactions in deuterium gas. A pulsed 200-nA, 2.2-MeV deuterium beam from the Triangle Universities Nuclear Laboratory FN tandem accelerator was injected into a cylindrical multiatmosphere deuterium gas target. The incident beam traversed along the target cylinder’s 3-cm symmetry axis after its passage through a Havar entrance foil. Two different Havar foil thicknesses were used to obtain 1.5- and 0.6-MeV deuteron beams entering the deuterium cell. The cylinder’s radius was 2 cm to allow for d(d,p)t tritons emitted perpendicular to the beam to range out in the deuterium gas. The neutron emission from the cell was observed via its time of flight to a liquid scintillator placed at various angles to the beam direction, at a distance of 243 cm. Pulse-shape-discrimination techniques were used to separate neutron and gamma-ray signals seen in the liquid scintillator. The observed probability of ~2 × 10 –4 for inducing secondary d(t,n)α fusion in the gas cell per d(d,p)t reaction is consistent with theoretical expectations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Kinetics for the reaction between the solvated electron and dissolved oxygen in n-dodecane from 2.5 to 40 °C

Temperature-controlled, time-resolved picosecond electron pulse radiolysis was utilized to measure the rate of reaction between the solvated electron (eS–) and dissolved oxygen in n-dodecane solutions from 2.5 to 40 °C for the first time. At 20.0 °C, the reaction rate was determined to be k(eS– + O2) = (4.54 ± 0.21) × 1010 M-1 s-1, with an activation energy of Ea = 14.4 ± 1.3 kJ mol-1. These newly determined kinetic parameters are important for predicting and managing the effects of aerated environments on the degradation of organic solvents used in nuclear fuel reprocessing technologies.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

Mechanistic Insights into Oxygen Reduction Reaction on Metal Cathode Over BaZrO 3 -Based Electrolyte under Moist Atmosphere: Interfacial Interactions and Reaction Pathways

The oxygen reduction reaction (ORR) is a critical process that often governs the overall performance of electrochemical systems such as proton conducting solid oxide fuel cells. Despite its significance, the current understanding about the ORR, especially when it involves H 2 O is still limited. In this study, the proton involved ORR (PI-ORR) on metal cathode (e.g., Pt) over BaZrO 3 (BZO) electrolyte is investigated using density functional theory (DFT) under moist atmosphere. Two scenarios are considered: one at relatively high temperature (900 K) in the presence of oxygen vacancy in BZO substrate and one at relatively low temperature (700 K) without oxygen vacancy. We systematically explored oxygen vacancy effects on adsorption sites and proton transfer pathways, calculated energy profiles and Gibbs free energies for elementary steps along the O 2 dissociated and the O 2 concerted reaction pathways. We also evaluated H 2 O impacts on intermediate oxygen species (*O and *OH) through Ab Initio molecular dynamics. These analyses revealed pathway-dependent reaction mechanisms and hydration effects at triple-phase boundary, advancing fundamental understanding of PI-ORR in metal cathode/Ba-based electrolyte systems for energy applications.

08 - HYDROGEN↗
DOE OSTI2026

Influence of Pt-Metal Alloy Catalysts with Various Ionomers on Oxygen Reduction Reaction in Fuel Cell Application

Pt-M/C (M = Co, Ni, Mn, etc.) alloy catalysts exhibit superior oxygen reduction reaction (ORR) activity compared to pure Pt/C, leading to a high energy efficiency in hydrogen fuel cells. However, many Pt-M/C alloy catalysts were synthesized and evaluated at the lab scale in model test-bed systems like rotating disc electrodes, which don't always correlate to performance within a fuel cell system; there is a clear need to evaluate catalysts in electrodes that can be prepared at industrially relevant scales to evaluate how factors like ink formulation can greatly affect device-level of fuel cell performance. Herein, three commercial Pt-M/C alloy catalysts (two Pt-Co/C and one Pt-Ni/C) were comprehensively characterized by various techniques. The results show that the average particle sizes of the three catalysts are close to 5 nm; the atomic ratio of Pt/M is around 4; and the M was successfully embedded into Pt lattice, resulting in the positive shift of Pt 4f in XPS spectra and XRD patterns. These catalytic materials were incorporated into 9 different cathode catalyst layers (CCLs) with three kinds of ionomers (Nafion D2020, high oxygen permeability ionomer (HOPI), and Aquivion D79-25BS), and their performance in proton exchange membrane fuel cells (PEMFCs) were investigated. The results demonstrate that the Pt-Co/C catalysts possess a higher mass activity (MA) than Pt-Ni/C; the cathodes with Nafion ionomer provide the highest MA while electrodes with Aquivion ionomer showed the lowest activity, attributed to poor H+ conductivity resulting from suboptimal ionomer incorporation. Finally, these alloys were shown to exceed DOE targets for MA and H2/Air performance reported in the recent publications at beginning of life and after 90k cycle catalyst AST protocol. This study provides valuable performance benchmarks for these materials guiding future Pt-M/C catalyst design and material integration for heavy duty PEMFC applications.

08 HYDROGEN↗
DOE OSTI2026

Evaluating Ru-RuO 2 @BN as a Bifunctional Electrocatalyst for the Nitrogen Reduction Reaction and the Hydrogen Evolution Reaction

Electrochemical approaches toward clean energy production have been the focus of significant attention. Here, the nitrogen (N 2 ) reduction reaction (NRR) and the hydrogen (H 2 ) evolution reaction (HER) offer a promising method for producing NH 3 and H 2 , respectively. Nevertheless, practical obstacles that must be overcome in creating optimal catalysts are the sluggish kinetics and low selectivity of NRR and HER. Herein, we report on the synthesis of a Ru-RuO 2 -decorated boron nitride (BN) catalyst that shows excellent activity toward NRR. A rate of NH3 formation (V NH3 ) of 16.8 μg h -1 mg -1 and a corresponding Faradaic efficiency (FE) of 52.9% were noted at a potential of −0.5 V in 0.1 M HCl. However, the HER activity of Ru-RuO 2 @BN was found to be highly suppressed in 0.1 M HCl and did not yield a reasonable overpotential value. Thus, the capability of this material toward NRR suggests its viability as a promising catalyst for clean NH 3 production.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2024

Concurrent measurement of strain and chemical reaction rates in a calcite grain pack undergoing pressure solution: Evidence for surface-reaction controlled dissolution

Pressure solution is inferred to be a significant contributor to sediment compaction and lithification, especially in carbonate sediments. For a sediment deforming primarily by pressure solution, the compaction rate should be directly related to the rate of calcite dissolution, transport along grain contacts, and calcite reprecipitation. Previous experimental work has shown that there is evidence that deformation in wet calcite grain packs is consistent with control by pressure solution, but considerable ambiguity remains regarding the rate limiting mechanism. We present the results of laboratory compaction experiments designed to directly measure calcite dissolution and precipitation rates (recrystallization rates) concurrently with strain rate to test whether measured rates are consistent with predicted rates both in absolute magnitude and time evolution. Recrystallization rates are measured using trace element chemistry (Sr/Ca, Mg/Ca) and isotopes (87Sr/86Sr) of fluids flowing slowly through a compacting grain pack as it is being triaxially compressed. Imaging techniques are used to characterize the grain contacts and strain effects in the post-experiment grain pack. Our data show that calcite recrystallization rates calculated from all three geochemical parameters are in approximate agreement and that the rates closely track strain rate. The geochemically inferred rates are close to predicted rates in absolute magnitude. Uncertainty in grain contact dimensions makes distinguishing between surface reaction control and diffusion control difficult. Measured reaction rates decrease faster than predicted from standard pressure solution creep flow laws. This inconsistency may indicate that calcite dissolution rates at grain contacts are more complex, and more time-dependent, than suggested by geometric models designed to predict grain contact stresses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Precursor reaction pathway leading to BiFeO 3 formation: insights from text-mining and chemical reaction network analyses

BiFeO 3 (BFO) is a next-generation non-toxic multiferroic material with applications in sensors, memory devices, and spintronics, where its crystallinity and crystal structure directly influence its functional properties. Designing sol–gel syntheses that result in phase-pure BFO remains a challenge due to the complex interactions between metal complexes in the precursor solution. Here, we combine text-mined data and chemical reaction network (CRN) analysis to obtain novel insight into BFO sol–gel precursor chemistry. We perform text-mining analysis of 340 synthesis recipes with the emphasis on phase-pure BFO and identify trends in the use of precursor materials, including that nitrates are the preferred metal salts, 2-methoxyethanol (2 ME) is the dominant solvent, and adding citric acid as a chelating agent frequently leads to phase-pure BFO. Our CRN analysis reveals that the thermodynamically favored reaction mechanism between bismuth nitrate and 2ME interaction involves partial solvation followed by dimerization, contradicting assumptions in previous literature. We suggest that further oligomerization, facilitated by nitrite ion bridging, is critical for achieving the pure BFO phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Computational Workflows for Uncertainty-Quantified Nuclear Reactions: From Nuclear Theory Inputs to Astrophysical Reaction Rates

Reactions on unstable nuclei, particularly those on the neutron-rich side of stability, are important for both fundamental and applied physics. For fundamental science, the most prevalent use case is astrophysi cal nucleosynthesis by rapid neutron capture—the r-process—by which heavy nuclei are formed in extreme astrophysical environments, such as in supernovae and neutron star mergers; see, e.g., Refs. [1–3]. For ap plications, these processes are relevant for the interpretation of radiochemical data from historic nuclear tests, which contribute to our ability to certify the enduring stockpile in the absence of nuclear testing [4]; see Ref. [5] for a broader discussion of applications. However, reaction cross sections involving unsta ble species are generally poorly understood, for the simple reason that useful data become scarce as one moves away from stability. While there are avenues for improving the amount and quality of data for these species [6], one is fundamentally reliant on nuclear theory to make progress on these fields of study.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Ethyl transfer reactions of NaBEt 4 with Cp*Rh(PMe 3 )PhBr and elimination reactions

The reaction of NaBEt 4 with Cp*Rh(PMe 3 )PhBr produces Cp*Rh(PMe 3 )PhEt by ethyl transfer. Single crystal X-ray analysis shows a typical piano-stool geometry. This compound reacts photochemically (λ > 320 nm) to give Cp*Rh(PMe 3 )PhH as the major product, plus ethylene. A secondary product was assigned as the square planar complex RhPh(PMe 3 )(η 4 -C 5 Me 5 Et) on the basis of NMR spectroscopy. Finally, the molecule decomposes over several days at ambient temperature, releasing C 5 Me 5 Et.

02 PETROLEUM↗
DOE OSTI2024

Photonuclear Reaction Types Map to ENDF Reaction Type Numbers MT

In the ENDF format, photonuclear cross secCons are stored in File = 3 under the NSUB = 0 sub-library. The type of reacCon data and the products resulCng from that reacCon are idenCfied by an integer number from 1 to 999, called MT number. However, the ENDF manual is wriPen with a strong focus on neutron induced reacCons and the meaning of MT numbers in the context of photonuclear reacCons can be at Cmes confusing and the assessment of evaluated photonuclear data may require summing various MT numbers to obtain the desired cross secCons to compare with experimental data. An important step in assessing the quality of evaluated data for photonuclear cross secCons is therefore to clarify the mapping between MT numbers and the nomenclature used to describe photonuclear reacCons in the literature. The intent of this document is to provide such a map.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

NCERC-CL TREAT Free Field Characterization Foil Reaction Rate Results

This report summarizes the analysis and preliminary MCNP reaction rate modeling of free field characterization measurements performed in the Transient Reaction Test Facility (TREAT) at Idaho National Laboratory (INL) between 12/18/2023 and 2/22/2024. A series of seven irradiations were performed using the Big-BUSTER (Broad Use Specimen Transient Experiment Rig) core configuration. Foil sets including 19.5% LEU-Zr alloy wire, S, Au, Fe, Ni, Co, Ti, and Zr were deployed in each irradiation. Identical foil sets were supplied to Los Alamos National Laboratory (LANL), Lawrence Livermore National Laboratory (LLNL), and INL. All foils were supplied by INL. Additional details on the experiment can be found in [2]. The foil sets were shipped to the National Criticality Experiments Research Center Counting Laboratory (NCERC-CL) branch at LANL (NCERC-CL NISC) and were received on 3/25/2024. Additional details on receipt and counting are reported in [3]. All reactor dosimetry measurements were performed in adherence to the ASTM standards applicable to reactor dosimetry. Measured reaction rates from Au, Co, Fe, Ni, and Ti are reported. Select reaction rate ratios and simulated reaction rates and ratios are discussed. Reaction rates for all measured reaction products were modeled with MCNP 6.3.1 and a TREAT input deck supplied by Edward Lum. Neutron emission estimates calculated using the measured and simulated reaction rates show excellent agreement between the three fast-threshold n-p reactions with the percent differences being < 9% between the three reactions. The capture reactions had poorer, but still reasonable, agreement with < 20% percent differences between the neutron emission estimates of the three capture reactions. The percent difference between the fast-threshold and capture reactions is ∼ 100% for each reaction. This supports the TREAT model is not accurately modeling the neutron spectrum and additional measurements are required to characterize TREAT and match measurements to simulation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Theoretical studies of chemical reactions related to the formation and growth of polycyclic aromatic hydrocarbons (PAH) and molecular properties of their key intermediates (Final Progress Report)

The formation mechanisms of polycyclic aromatic hydrocarbons, (PAHs) – organic molecules carrying fused benzene rings – are of great interest to scientists and engineers due to their importance in combustion chemistry and astrochemistry. On Earth, PAHs are largely produced in incomplete combustion of fossil fuel and are considered as critical precursors to unwanted soot particles leading to combustion inefficiency and causing air pollution along with detrimental health effects. Simple PAH molecules initially formed in the gas phase, are further involved in a build-up process in combustion flames leading to larger PAH, bowl-shaped nanostructures, fullerenes, and solid-phase species including carbonaceous dust, graphene particles, and soot. In deep space, PAH and their derivatives are potential key intermediates and nucleation sites leading eventually to carbonaceous nanoparticles (“interstellar grains”). Therefore, the understanding of the key processes in the synthesis of PAHs along with their precursors and their degradation mechanisms in combustion systems and in interstellar, circumstellar, and planetary atmospheric environments will provide critical insights into how complex aromatic structures, carbonaceous nanoparticles, and fullerenes are formed and destroyed. Achieving this understanding is an important step in the development of the efficient combustion processes and of the ecofriendly devices with reduced environmental pollution as well as technological strategies for the production of hydrogen and solid carbon through thermal or plasma-assisted pyrolysis of natural gas and biomass. Also, the understanding of the key processes of PAH and soot growth will help in our comprehension of chemical evolution in the universe. Detailed information on the mechanisms and reliable rate constants of the key elementary chemical reactions involved in PAH formation and destruction processes and in inception of soot particles is often missing, with the main deficiencies being the absence of temperature- and pressure-dependent rate constants for the broad range of conditions occurring in various terrestrial and interstellar processes and the lack of data on the reaction products and their branching ratios. Complementary to experimental studies, these gaps in knowledge can be filled by using quantum chemical calculations of reaction potential energy surfaces providing us with accurate energies of reaction products, intermediates, and transition states, revealing the reaction mechanism, and giving the molecular properties required to compute rate constants for relevant reaction steps and product branching ratios using the RRKM-Master Equation (ME) method. Molecular dynamics (MD) simulations can be used in cases when a reaction rate cannot be properly described by statistical theories. During the terminal renewal project period we employed these ab initio/RRKM-ME and MD approaches to complete our studies on several key reactions relevant to the formation/growth of PAH and inception of soot particles including (1) the reaction mechanism and kinetics of the resonance stabilized fulvenallenyl radical with propargyl and C 3 H 4 isomers; (2) the reaction mechanism and kinetics for the C + indene and C 2 + styrene reactions producing naphthyl or azulenyl radicals in low-temperature environments; (3) the MD study of non-equilibrium dimerization of acepyrene and coronene and its radical. The information derived from our theoretical calculations contributed to a better fundamental understanding of the reaction mechanisms and provide missing critical kinetic data to improve combustion models of hydrocarbon fuels and astrochemical models of the growth of carbonaceous molecules and particles in cold molecular clouds, circumstellar envelopes, and planetary atmospheres.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗