Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “pseudo noise ranging”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2001

Regenerative pseudo-noise ranging for deep space applications

Currently, ranging for deep space missions is performed by turning around the uplink ranging modulation and remodulating it onto the downlink carrier. This method results in about 1.5 MHz of noise also being modulated onto the downlink, severely degrading the received ranging SNR on the ground. This degradation must be compensated for by either increasing the integration time of the received signal, which increases the length of time for the track, or increasing the downlink ranging signal's modulation index, which decreases the power available for the telemetry modulation. A method for the regeneration on the spacecraft of a pseudo noise (PN) ranging signal has been developed. This method allows for an increase of up to 30dB in the received downlink ranging power. The increased power can be used to decrease the measurement uncertainty, reduce the time of the measurement, or increase the power allocated to the downlink telemetry. This system was implemented in the Spacecraft Transponding Modem that was developed by JPL for NASA.

deep space ranging↗
NASA NTRS2004

Future capabilities for the Deep Space Network

This paper will look at three new capabilities that are in different stages of development. First, turbo decoding, which provides improved telemetry performance for data rates up to about 1 Mbps, will be discussed. Next, pseudo-noise ranging will be presented. Pseudo-noise ranging has several advantages over the current sequential ranging, anmely easier operations, improved performance, and the capability to be used in a regenerative implementation on a spacecraft. Finally, Low Density Parity Check decoding will be discussed. LDPC codes can provide performance that matches or slightly exceed turbo codes, but are designed for use in the 10 Mbps range.

turbo code↗
NASA NTRSDate not supplied

Ground-testing of One-way Ranging from a Lunar Beacon Demonstrator Payload (Lunar Node -1)

Similar to lighthouses providing navigation aids and awareness to ships sailing along the coast, in-situ navigation beacons can be used to provide redundancy, awareness, and improved onboard position knowledge for vehicles operating in and around the lunar sphere of influence. Lunar Node - 1 is a radio frequency navigation beacon that is manifested on Intuitive Machines' NOVA-C lunar lander flight in 2022 for operation during cruise and from a mid-latitude landing location. This payload utilizes commercial components developed for Low Earth Orbit applications and packages them into an integrated package to provide a navigation reference signal as part of a large lunar-centric navigation network. As part of its operations, Deep Space Network ground stations will operate as the notional "user" of this service, allowing for performance characterization, calibration, and operation of the beacon payload. This paper provides an overview of the payload, how its fits into a large concept of operations, and ground testing results. A specific focus is on ground testing of the payload with DSN ground receivers as part of RF Compatibility Testing. A primary goal of this testing was to characterize a pseudo-noise ranging code sequence generated by the payload. The results in this paper define the testing sequence, unique operational constraints with two-way ranging ground equipment, and applications of the ground-derived error model to predicted in-flight performance of the ranging code.

Evan Anzalone↗
NASA NTRSDate not supplied

Ground-Testing of One-Way Ranging from a Lunar Beacon Demonstrator Payload (Lunar Node -1)

Similar to lighthouses providing navigation aids and awareness to ships sailing along the coast, in-situ navigation beacons can be used to provide redundancy, awareness, and improved onboard position knowledge for vehicles operating in and around the lunar sphere of influence. Lunar Node - 1 is a radio frequency navigation beacon that is manifested on Intuitive Machines' NOVA-C lunar lander flight in 2022 for operation during cruise and from a mid-latitude landing location. This payload utilizes commercial components developed for Low Earth Orbit applications and packages them into an integrated package to provide a navigation reference signal as part of a large lunar-centric navigation network. As part of its operations, Deep Space Network ground stations will operate as the notional "user" of this service, allowing for performance characterization, calibration, and operation of the beacon payload. This paper provides an overview of the payload, how its fits into a large concept of operations, and ground testing results. A specific focus is on ground testing of the payload with DSN ground receivers as part of Radio Frequency (RF) Compatibility Testing. A primary goal of this testing was to characterize a pseudo-noise ranging code sequence generated by the payload. The results in this paper define the testing sequence, unique operational constraints with two-way ranging ground equipment, and applications of the ground-derived error model to predicted in-flight performance of the ranging code.

Evan J Anzalone↗
NASA NTRS1977

Pseudo noise code and data transmission method and apparatus

Pseudo noise ranging codes, having a predetermined chipping rate, and a pair of binary data sources, each having a bit rate no greater than one tenth the chipping rate, quadriphase, digitally modulate a suppressed carrier wave having a first frequency are examined. Two additional binary data sources, each having a bit rate that is not restricted by the chipping rate of the first carrier, quadriphase, digitally modulate a suppressed carrier wave having a second frequency. The first and second frequencies are only slightly displaced so that there is overlap in the frequency bands which modulate the two carriers. The two suppressed carrier waves are linearly combined and transmitted from a first station to a second station so that the amplitude of the transmitted first wave is controlled so as not to degrade the detectability of the second wave at the second station.

Deerkoski, L. F.↗
NASA NTRS2003

Keeping Communication Continuous

General Dynamics Decision Systems employees have played a role in supplying telemetry, tracking, and control (TT&C) and other communications systems to NASA and the U.S. Department of Defense for over 40 years. Providing integrated communication systems and subsystems for nearly all manned and unmanned U.S. space flights, the heritage of this Scottsdale, Arizona-based company includes S-band transceivers that enabled millions of Americans to see Neil Armstrong and hear his prophetic words from the Moon in 1969. More recently, Decision Systems has collaborated with NASA s Goddard Space Flight Center to develop transponders, wireless communications devices that pick up and automatically respond to an incoming signal, for NASA s Tracking and Data Relay Satellite System (TDRSS). Four generations of Decision Systems TDRSS transponders have been developed under Goddard s sponsorship. The company s Fourth Generation TDRSS User Transponder (TDRSS IV) allows low-Earth-orbiting spacecraft to communicate continuously with a single ground station at White Sands, New Mexico, through a constellation of geostationary relay satellites positioned at key locations around the Earth. In addition to the communications of forward link control commands and return link telemetry data, the TDRSS IV also supports spacecraft orbit tracking through coherent turn-around of a pseudo-noise ranging code and two-way Doppler tracking.When the NSBF adopted the use of global positioning system receivers for balloon position tracking, Decision Systems concluded that a simpler, noncoherent transceiver could provide the NSBF with the necessary TDRSS communications without the additional cost and complexity of a coherent transponder. The solution was to take the core design of the TDRSS IV Transponder, but remove the extra functionality that supported coherent turn-around. This would simplify the production effort, reduce the testing required, and result in a lower cost product with smaller size, weight, and power consumption. Once NSBF and Decision Systems agreed on a concept for this new product, known as the Multi-Mode Transceiver (MMT), the NSBF approached Goddard for approval and funding.

Source record↗
NASA NTRS1992

Study of pseudo noise CW diode laser for ranging applications

A new Pseudo Random Noise (PN) modulated CW diode laser radar system is being developed for real time ranging of targets at both close and large distances (greater than 10 KM) to satisy a wide range of applications: from robotics to future space applications. Results from computer modeling and statistical analysis, along with some preliminary data obtained from a prototype system, are presented. The received signal is averaged for a short time to recover the target response function. It is found that even with uncooperative targets, based on the design parameters used (200-mW laser and 20-cm receiver), accurate ranging is possible up to about 15 KM, beyond which signal to noise ratio (SNR) becomes too small for real time analog detection.

Lee, Hyo S.↗
NASA NTRS2000

The NASA Spacecraft Transponding Modem

A new deep space transponder is being developed by the Jet Propulsion Laboratory for NASA. The Spacecraft Transponding Modem (STM) implements the standard transponder functions and the channel service functions that have previously resided in spacecraft Command/Data Subsystems. The STM uses custom ASICs, MMICs, and MCMs to reduce the active device parts count to 70, mass to I kg, and volume to 524 cc. The first STMs will be flown on missions launching in the 2003 time frame. The STM tracks an X-band uplink signal and provides both X-band and Ka-band downlinks, either coherent or non-coherent with the uplink. A NASA standard Command Detector Unit is integrated into the STM, along with a codeblock processor and a hardware command decoder. The decoded command codeblocks are output to the spacecraft command/data subsystem. Virtual Channel 0 (VC-0) (hardware) commands are processed and output as critical controller (CRC) commands. Downlink telemetry is received from the spacecraft data subsystem as telemetry frames. The STM provides the following downlink coding options: the standard CCSDS (7-1/2) convolutional coding, ReedSolomon coding with interleave depths one and five, (15-1/6) convolutional coding, and Turbo coding with rates 1/3 and 1/6. The downlink symbol rates can be linearly ramped to match the G/T curve of the receiving station, providing up to a 1 dB increase in data return. Data rates range from 5 bits per second (bps) to 24 Mbps, with three modulation modes provided: modulated subcarrier (3 different frequencies provided), biphase-L modulated direct on carrier, and Offset QPSK. Also, the capability to generate one of four non-harmonically related telemetry beacon tones is provided, to allow for a simple spacecraft status monitoring scheme for cruise phases of missions. Three ranging modes are provided: standard turn around ranging, regenerative pseudo-noise (PN) ranging, and Differential One-way Ranging (DOR) tones. The regenerative ranging provides the capability of increasing the ground received ranging SNR by up to 30 dB. Two different avionics interfaces to the command/data subsystem's data bus are provided: a MIL STD 1553B bus or an industry standard PCI interface. Digital interfaces provide the capability to control antenna selection (e.g., switching between high gain and low gain antennas) and antenna pointing (for future steered Ka-band antennas).

Berner, Jeff B.↗
NASA NTRS2016

Telemetry Ranging - Concept Paper Summary

Background - Previous CCSDS meetings: Spring 2015: Telemetry ranging technique was described; Fall 2015: A comparison to GMSK (Gaussian Minimum Shift Keying) plus PN (Pseudo-random Noise) ranging was made. -How telemetry ranging works: The spacecraft tracks the phase of the uplink PN ranging signal; Receive-time of downlink telemetry frame provides timing information; No downlink ranging signal is used. - This presentation: Summarizes the telemetry ranging concept paper. - Purpose: The purpose of the concept paper is to propose that the RFM (Radio Frequency Multiplier) Working Group consider telemetry ranging for inclusion as a recommended method for two-way ranging in the 401.0-B Blue Book.

Hamkins, Jon↗
NASA NTRS2010

Multiple Access Schemes for Lunar Missions

Two years ago, the NASA Coding, Modulation, and Link Protocol (CMLP) study was completed. The study, led by the authors of this paper, recommended codes, modulation schemes, and desired attributes of link protocols for all space communication links in NASA's future space architecture. Portions of the NASA CMLP team were reassembled to resolve one open issue: the use of multiple access (MA) communication from the lunar surface. The CMLP-MA team analyzed and simulated two candidate multiple access schemes that were identified in the original CMLP study: Code Division MA (CDMA) and Frequency Division MA (FDMA) based on a bandwidth-efficient Continuous Phase Modulation (CPM) with a superimposed Pseudo-Noise (PN) ranging signal (CPM/PN). This paper summarizes the results of the analysis and simulation of the CMLP-MA study and describes the final recommendations.

Deutsch, Leslie↗