SEARCH · Engineering Papers
Results for “protons”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Revisiting proton–proton fusion in chiral effective field theory
We calculate the S-factor for proton–proton fusion using chiral effective field theory interactions and currents. By performing order-by-order calculations with a variety of chiral interactions that are regularized and calibrated in different ways, we assess the uncertainty in the S-factor from the truncation of the effective field theory expansion and from the sensitivity of the S-factor to the short-distance axial current determined from three- and four-nucleon observables. We find that S(0) = (4.100 ± 0.024(syst) ± 0.013(stat) ± 0.008(g$_{A}$)) × 10$^{−23}$ MeV fm$^{2}$, where the three uncertainties arise, respectively, from the truncation of the effective field theory expansion, use of the two-nucleon axial current fit to few-nucleon observables and variation of the axial coupling constant within the recommended range. The increased value of S(0) compared to previous calculations is mainly driven by an increase in the recommended value for the axial coupling constant and is in agreement with a recent analysis based on pionless effective field theory.
A search for decays of the Higgs boson to invisible particles in events with a top-antitop quark pair or a vector boson in proton-proton collisions at $$\sqrt{s} = 13\,\text {Te}\hspace{-.08em}\text {V} $$
A search for decays to invisible particles of Higgs bosons produced in association with a top-antitop quark pair or a vector boson, which both decay to a fully hadronic final state, has been performed using proton-proton collision data collected at $\sqrt{s} = 13$ TeV by the CMS experiment at the LHC, corresponding to an integrated luminosity of 138fb -1 . The 95% confidence level upper limit set on the branching fraction of the 125 GeV Higgs boson to invisible particles, B(H → inv), is 0.54 (0.39 expected), assuming standard model production cross sections. The results of this analysis are combined with previous B(H → inv) searches carried out at $\sqrt{s} = 7$, 8, and 13 TeV in complementary production modes. The combined upper limit at 95% confidence level on B(H → inv) is 0.15 (0.08 expected).
Dielectron production in proton-proton and proton-lead collisions at $\sqrt{s_{NN}}$=5.02TeV
The first measurements of dielectron production at midrapidity (|η e | < 0.8) in proton–proton and proton–lead collisions at $\sqrt{s_{NN}}$ = 5.02 TeV at the LHC are presented. The dielectron cross section is measured with the ALICE detector as a function of the invariant mass m ee and the pair transverse momentum p T,ee in the ranges mee < 3.5 GeV/c 2 and p T,ee < 8 GeV/c, in both collision systems. In proton–proton collisions, the charm and beauty cross sections are determined at midrapidity from a fit to the data with two different event generators. This complements the existing dielectron measurements performed at $\sqrt{s}$ = 7 and 13 TeV. The slope of the $\sqrt{s}$ dependence of the three measurements is described by FONLL calculations. The dielectron cross section measured in proton–lead collisions is in agreement, within the current precision, with the expected dielectron production without any nuclear matter effects for e + e - pairs from open heavy-flavor hadron decays. For the first time at LHC energies, the dielectron production in proton–lead and proton–proton collisions are directly compared at the same $\sqrt{s_{NN}}$ via the dielectron nuclear modification factor R pPb . The measurements are compared to model calculations including cold nuclear matter effects, or additional sources of dielectrons from thermal radiation.
Search for central exclusive production of top quark pairs in proton-proton collisions at $\sqrt{s}$ = 13 TeV with tagged protons
A search for the central exclusive production of top quark-antiquark pairs ($t\overline{t}$) is performed for the first time using proton-tagged events in proton-proton collisions at the LHC at a centre-of-mass energy of 13 TeV. The data correspond to an integrated luminosity of 29.4 fb -1 . The $t\overline{t}$ decay products are reconstructed using the central CMS detector, while forward protons are measured in the CMS-TOTEM precision proton spectrometer. An observed (expected) upper bound on the production cross section of 0.59 (1.14) pb is set at 95% confdence level, for collisions of protons with fractional momentum losses between 2 and 20%.
Observation of partonic flow in proton—proton and proton—nucleus collisions
Quantum Chromodynamics predicts a phase transition from hadronic matter to quark–gluon plasma (QGP) at high temperatures and energy densities, where quarks and gluons (partons) are no longer confined within hadrons. The QGP forms in ultrarelativistic heavy-ion collisions. Anisotropic flow coefficients, quantifying the azimuthal expansion of produced matter, probe QGP properties. Flow measurements in high-energy heavy-ion collisions show a distinctive grouping of anisotropic flow for baryons and mesons at intermediate transverse momentum – a feature associated with flow imparted at the quark level, confirming QGP existence. The observation of QGP-like features in proton–proton and proton–ion collisions has sparked debate about QGP formation in smaller systems. For the first time, we demonstrate the distinctive grouping of anisotropic flow for baryons and mesons in high-multiplicity proton–lead and proton–proton collisions at the Large Hadron Collider (LHC). These results are described by a model including hydrodynamic flow followed by hadron formation via quark coalescence, consistent with the formation of partonic flowing systems in these collisions.
Search for high-mass exclusive diphoton production with tagged protons in proton-proton collisions at s = 13 TeV
A search is presented for high-mass exclusive diphoton production via photon-photon fusion in proton-proton collisions at s = 13 TeV in events where both protons survive the interaction. The analysis utilizes data corresponding to an integrated luminosity of 103 fb − 1 collected in 2016–2018 with the central CMS detector and the CMS and TOTEM precision proton spectrometer (PPS). Events that have two photons with high transverse momenta ( p T γ > 100 GeV ), back-to-back in azimuth, and with a large diphoton invariant mass ( m γ γ > 350 GeV ) are selected. To remove the dominant inclusive diphoton backgrounds, the kinematic properties of the protons detected in PPS are required to match those of the central diphoton system. Only events having opposite-side forward protons detected with a fractional momentum loss between 0.035 and 0.15 (0.18) for the detectors on the negative (positive) side of CMS are considered. One exclusive diphoton candidate is observed for an expected background of 1.1 events. Limits at 95% confidence level are derived for the four-photon anomalous coupling parameters | ζ 1 | < 0.073 TeV − 4 and | ζ 2 | < 0.15 TeV − 4 , using an effective field theory. Additionally, upper limits are placed on the production of axionlike particles with coupling strength to photons f − 1 that varies from 0.03 TeV − 1 to 1 TeV − 1 over the mass range from 500 to 2000 GeV. © 2024 CERN, for the CMS and TOTEMs Collaboration 2024 CERN
First Search for Exclusive Diphoton Production at High Mass with Tagged Protons in Proton-Proton Collisions at $\sqrt{s} = 13$
A search for exclusive two-photon production via photon exchange in proton-proton collisions, pp $\to$ p$\gamma\gamma$p with intact protons, is presented. The data correspond to an integrated luminosity of 9.4 fb$^{-1}$ collected in 2016 using the CMS and TOTEM detectors at a center-of-mass energy of 13 TeV at the LHC. Events are selected with a diphoton invariant mass above 350 GeV and with both protons intact in the final state, to reduce backgrounds from strong interactions. The events of interest are those where the invariant mass and rapidity calculated from the momentum losses of the forward-moving protons matches the mass and rapidity of the central, two-photon system. No events are found that satisfy this condition. Interpreting this result in an effective dimension-8 extension of the standard model, the first limits are set on the two anomalous four-photon coupling parameters. If the other parameter is constrained to its standard model value, the limits at 95% CL are $\lvert\zeta_1\rvert$ $\lt$ 2.9 $\times$ 10$^{-13}$ GeV$^{-4}$ and $\lvert\zeta_2\rvert$ $\lt$ 6.0 $\times$ 10$^{-13}$ GeV$^{-4}$.
Femtoscopic study of the proton-proton and proton-deuteron systems in heavy-ion collisions at the LHC
This work reports femtoscopic correlations of p – – p ($\overline{p}$ – – $\overline{p}$) and p – – d ($\overline{p}$ – – $\overline{d}$) pairs measured in Pb–Pb collisions at center-of-mass energy per nucleon $\sqrt{s_{NN}}$ = 5.02 TeV in the ALICE Collaboration. A fit to the measured proton-proton correlation functions allows one to extract the dependence of the nucleon femtoscopic radius of the particle-emitting source on the pair transverse mass (m T ) and on the average charge particle multiplicity $\langle$dN ch /dη$\rangle$ 1/3 for three centrality intervals (0–10%, 10 – – 30 %, 30 – – 50 %). In both cases, the expected power-law and linear scalings are observed, respectively. The measured p–d correlations can be described by both two- and three-body calculations, indicating that the femtoscopy observable is not sensitive to the short-distance features of the dynamics of the p-(p-n) system, due to the large inter-particle distances in Pb–Pb collisions at the LHC. Indeed, in this study, the minimum measured femtoscopic source sizes for protons and deuterons have a minimum value at 2.73$^{+0.05}_{–0.05}$ and 3.10$^{+1.04}_{–0.86}$ fm, respectively, for the 30–50% centrality collisions. Moreover, the m T -scaling obtained for the p–p and p–d systems is compatible within 1σ of the uncertainties. These findings provide new input for fundamental studies on the production of light (anti)nuclei under extreme conditions.
Addendum: Dielectron production in proton-proton and proton-lead collisions at $\sqrt{s_{NN}}$ = 5.02 TeV
This is an addendum to the article “Dielectron production in proton-proton and proton-lead collisions at $\sqrt{s_{NN}}$ = 5.02 TeV” published in [Phys. Rev. C 102, 055204 (2020)]. We update the extracted charm cross section at midrapidity given in Table III and Fig. 4 (left) of the original publication with the fragmentation fractions of charm quarks in 𝑝𝑝 collisions published in [Phys. Rev. D 105, L011103 (2022)].
Precision Small Scattering Angle Measurements of Proton–Proton and Proton–Nucleus Analyzing Powers at the RHIC Hydrogen Jet Polarimeter
At RHIC, the hydrogen jet target polarimeter (HJET) is used to measure proton beam polarization with accuracy $σ^{syst}_{P}$ / $P$ ≲ 0.5% by counting low energy (1–10 MeV) recoil protons in left-right symmetric detectors. The HJET performance also allowed us to precisely measure $pp$ and $pA$ (where $A$ is any ion stored at RHIC) analyzing powers in the CNI region. The results of the measurements are discussed.
Protein Motifs for Proton Transfers That Build the Transmembrane Proton Gradient
Biological membranes are barriers to polar molecules, so membrane embedded proteins control the transfers between cellular compartments. Protein controlled transport moves substrates and activates cellular signaling cascades. In addition, the electrochemical gradient across mitochondrial, bacterial and chloroplast membranes, is a key source of stored cellular energy. This is generated by electron, proton and ion transfers through proteins. The gradient is used to fuel ATP synthesis and to drive active transport. Here the mechanisms by which protons move into the buried active sites of Photosystem II (PSII), bacterial RCs (bRCs) and through the proton pumps, Bacteriorhodopsin (bR), Complex I and Cytochrome c oxidase (CcO), are reviewed. These proteins all use water filled proton transfer paths. The proton pumps, that move protons uphill from low to high concentration compartments, also utilize Proton Loading Sites (PLS), that transiently load and unload protons and gates, which block backflow of protons. PLS and gates should be synchronized so PLS proton affinity is high when the gate opens to the side with few protons and low when the path is open to the high concentration side. Proton transfer paths in the proteins we describe have different design features. Linear paths are seen with a unique entry and exit and a relatively straight path between them. Alternatively, paths can be complex with a tangle of possible routes. Likewise, PLS can be a single residue that changes protonation state or a cluster of residues with multiple charge and tautomer states.
Influence of the proton relay spacer on hydrogen electrocatalysis by cobalt hangman porphyrins
A cobalt hangman porphyrin system with a phenyl spacer between the porphyrin ring and an internal carboxylic acid group as well as its non-hangman analogue were synthesized and utilized for the study of the proton-coupled electron transfer (PCET) kinetics attendant to electrocatalytic hydrogen evolution. Cyclic voltammetry (CV) together with simulations show that a short distance between the proton relay and the redox active cobalt center as well as the increased proton donating strength results in superior catalytic activity. Here, the mechanism of hydrogen generation is at the nexus of proton transfer–electron transfer (PTET) and concerted proton–electron transfer (CPET), as opposed to an ETPT mechanism that is characteristic of hangman systems with longer proton relay networks.
Improving Proton Conductivity by Navigating Proton Trapping in High Scandium-Doped Barium Zirconate Electrolytes
Proton-conducting oxides are used in intermediate-temperature (300 °C < T < 700 °C) applications of fuel cells, electrolyzers, membrane reactors, hydrogen pumps, and sensors. The proton conductivity of doped ABO 3 perovskites is partly dependent on the proton concentration and hence on the level of material hydration. However, how the material hydration ability is affected by differences in doping is not fully understood. Here, we show the prospect of proton trapping and detrapping that influences material hydration and dehydration. The proton-trapping influence is significant for Sc-doped BaZrO 3 compared to Y-doped BaZrO 3 . Here, our work offers a perspective to understand how defect interaction/associations influence the hydration ability of proton-conducting oxides. Furthermore, positron annihilation lifetime spectroscopy was revealed to be a valuable technique for studying the proton-trapping phenomena and the defect chemistry of dense proton conductors. Density functional theory calculations also showed that a high hydration level in Sc-doped BaZrO 3 boosts proton migration. In contrast, the effect of boosting the proton migration due to increased hydration is limited for Y-doped BaZrO 3 . This effect, in turn, might explain the trend of conductivity with dopant concentration in doped BaZrO 3 .
The Role of Protons and Hydrides in the Catalytic Hydrogenolysis of Guaiacol at the Ruthenium Nanoparticle-water Interface
The mechanistic roles of free hydronium ions, surface hydrides, and interfacial protons during guaiacol hydrodeoxygenation (HDO) on ruthenium nanoparticles are established. As guaiacol adsorbs on Ru, it loses its strong aromaticity and undergoes a rapid H-shift from its hydroxyl to meta carbons (in relation to its hydroxyl group), leading enol and keto surface isomers to exist in chemical equilibrium. HDO occurs via a hydridic H-adatom (H*) attack to the enol, followed by a kinetically relevant C-O bond rupture step, during which water shuttles the hydroxyl proton, enabling its intramolecular attack to the methoxy, evolving a high charged [Ru(s)-(C6H5O-)…(H+)…OCH3]† transition state. The competing HYD begins with a rapid H* attack to the keto, before a second, kinetically relevant H* attack, without proton involvement. Water, despite shifting the thermodynamics towards the more polar surface keto, promotes HDO to a much greater extent than HYD, because of its dual catalytic roles—it mobilizes hydroxyl proton (Brønsted acid) to cleave the strong C-O bond, synchronizing with the Ru metal surface (base) function that stabilizes the resulting [Ru(s)-(C6H5O-)…(H+)…OCH3]† transition state, and the water layers solvate this charged transition state, further reducing its free energy. Free hydronium ions do catalyze a separate homogeneous enol-keto isomerization, but this reaction is kinetically unrelated to HDO catalysis. This mechanistic picture explains the strong effects of polar protic solvent in hydrodeoxygenation, highlighting (i) the requirements of surface hydrides and interfacial protons acting in tandem to complete a HDO turnover and (ii) the cooperative role of protic solvent and metal surface in breaking the aromaticity and stabilizing charged reactive precursors and transition states.
Proton Conducting Sulfonated Poly(Ionic Liquid) Block Copolymers
Herein, we report the synthesis of proton-conducting sulfonated poly(ionic liquid) block copolymers (S-PILBCPs) containing one block with sulfonic acid (sulfonated styrene, SS) and the other with an IL moiety (vinylbenzylmethylimidazolium bis(trifluoromethylsulfonyl)imide, VBMIm-TFSI) using reversible addition–fragmentation chain-transfer (RAFT) polymerization and post-polymerization modifications (i.e., functionalization, anion exchange reactions, and sulfonation). The S-PILBCPs uniquely conjoin the SS block with mobile protons (H + ) and the PIL block with mobile anions (TFSI – ), where multiple highly desired properties, including high proton conductivity (from the SS block), and high IL-philicity and oxygen solubility (from the PIL block) can exist compartmentally within a microphase separated morphology (evidenced by differential scanning calorimetry (DSC) and small-angle X-ray scattering (SAXS)). High ion conductivity of 79.7 mS/cm at a PIL block composition of 21.6 mol % was observed at 80 °C and 90% relative humidity (RH) (comparable to the benchmark Nafion ionomer). This work successfully demonstrates the design of S-PILBCPs as a new material platform and showcases its promise as an ionomer for proton exchange membrane fuel cells (PEMFCs) as they simultaneously and compartmentally combine proton conductivity and oxygen solubility. Furthermore, these benefits have recently been leveraged to achieve substantial improvement in oxygen reduction reaction (ORR) activity and subsequently fuel cell performance.
Angular-spectral filtering of recoil protons for optimization of fast neutron imaging employing proton converters
Fast neutron imaging is an important capability for diverse applications such as inertial confinement fusion diagnostics, cargo security, nuclear nonproliferation and arms control, and industrial inspection. Traditional phosphor image plates can be enhanced for fast neutron imaging using hydrogenous plastic converters which allow fast neutrons to scatter off hydrogen nuclei to produce energetic protons that can be recorded by the image plate. However, protons emitted by image plates are not constrained in their emission angle, which contributes to the blur of the resulting image. Here, we investigate two methods that can alter the spatial extent of converted protons that deposit energy in the image plate: reducing the converter thickness, and introducing a proton filter between the plastic converter and image plate to reduce the contribution of lower-energy, off-axis protons to the image. Here we determine the optimal plastic converter thickness for maximizing the signal intensity to be 2–3 mm through Monte Carlo simulations, and we benchmark this result against experimental measurements with a deuterium-tritium (DT) neutron generator. Next, we evaluate the image smearing and signal loss for various converters to show that solely reducing the converter thickness has the expected effect of reducing the blur from proton image smearing of the sharpness of an edge recorded on the image plate at the cost of reducing the signal intensity. The use of a proton filter is shown to achieve a similar improvement of edge sharpness as reducing the converter thickness while also sacrificing the signal intensity. We conclude that the use of proton energy filtering can improve the sharpness of fast neutron images in situations where the converter thickness cannot be reduced below some practical minimum. For more intense neutron sources, the signal intensity is of less concern, and optimizing the resolution of the image plate and therefore of the imaging system could have greater value. In these applications, proton filters may allow for improved fast neutron imaging measurements.