Engineering PapersSearch

SEARCH · Engineering Papers

Results for “pressure coring”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Surface Deformation Caused by Pressure Changes in the Fluid Core

Pressure load Love numbers are presented for the mantle deformation induced by the variation of the pressure field at the core mantle boundary (CNB). We find that the CMB geostrophic pressure fields, derived from 'frozen-flux' core surface flow estimates at epochs 1965 and 1975, produce a relative radial velocity (RRV) field in the range of 3mm/decade with uplift near the equator and subsidence near the poles. The contribution of this mechanism to the change in the length of day (l.o.d) is small --- about 2.3 x 10(exp -2) ms/decade. The contribution to the time variation of the ellipticity coefficient is more important --- -1.3 x 10(exp -11)/yr.

Fang, Ming

Design and overall performance of four highly loaded, high speed inlet stages for an advanced high-pressure-ratio core compressor

The detailed design and overall performances of four inlet stages for an advanced core compressor are presented. These four stages represent two levels of design total pressure ratio (1.82 and 2.05), two levels of rotor aspect ratio (1.19 and 1.63), and two levels of stator aspect ratio (1.26 and 1.78). The individual stages were tested over the stable operating flow range at 70, 90, and 100 percent of design speeds. The performances of the low aspect ratio configurations were substantially better than those of the high aspect ratio configurations. The two low aspect ratio configurations achieved peak efficiencies of 0.876 and 0.872 and corresponding stage efficiencies of 0.845 and 0.840. The high aspect ratio configurations achieved peak ratio efficiencies of 0.851 and 0.849 and corresponding stage efficiencies of 0.821 and 0.831.

Reid, L.

Multi-Anvil Experimentation Applied to Planetary Differentiation

Planets undergo differentiation that includes segregation of metal from silicate at high temperatures and pressures ranging from deep planetary core pressures (>300 GPa for Earth)to very shallow conditions of asteroids (<100 MPa).The multi-anvil solid media apparatus accesses the middle part of this range from 3 to 30 GPa –pressure relevant to the interior of Mercury, Venus, Earth, Earth’s Moon, and Mars. Early planets are thought to have experienced high temperatures from a combination of heat sources including radioactive decay, gravitational and accretional heating, and impact processes. These heating events led to melting of mantles and cores, thus requiring an understanding of solid-liquid equilibria in metal-silicate systems. In 2006 we established a multi-anvil facility at NASA-JSC combining an 880 ton press and a Kawai/Walker type module from Rockland Research. Our high PT work has been greatly facilitated by use of the COMPRES multi-anvil assemblies (1). Our recent work has included studies of element partitioning between liquid metal and liquid silicate(e.g., 2), as well as between minerals and melts(e.g., 3), both of which have led to better constraints on the timing and conditions of planetary differentiation(e.g. 4). Several examples involving sustained efforts will be summarized below and for the presentation. The distribution of siderophile (iron-loving) elements between core and mantle is controlled by metal-silicate equilibrium across a wide range of pressures. Therefore, experimentation across this pressure range helps to calibrate elemental partitioning models that can be applied to planets, and used to predict mantle chemistry and composition during planetary differentiation. Our studies have focused on a wide range of siderophile elements (refractory Ni, Co, W, Mo; volatile P, Ga, Cu, Sn, Sb; highly siderophile Au, Pd) that have constrained partitioning, valence, and isotopic fractionation, and applied to Earth, Moon, and Mars. When molten mantles (magma oceans) cool enough to initiate crystallization, the solids precipitate at depth and in large planets this involves high pressure phases like garnet, majorite, akimotoite, and ringwoodite. As these solids precipitate they can segregate from liquid by density contrasts, thus causing elemental fractionation which can be used to decipher timing of differentiation. Mineral/melt and metal/silicate equilibria in our lab have helped to better understand high pressure fractionation of isotopic parent/daughter pairs Hf/W, Mn/Cr, Pd/Ag, Pt/Os, Re/Os, and U/Pb, and their application to Earth, Moon and Mars. There remains great potential for multi-anvil experimentation to shed light on many pressure–dependent aspects of planetary evolution such as core formation, high pressure phase equilibria, redox equilibria, and volatile evolution and storage. References1. Leinenweber, K., et al.(2012) American Mineralogist,97, 353–368. 2.Righter, K., et al.(2020) Geochem. Persp. Lett.15, 1-6.3. Righter, K., et al.(2020) Met. Planet. Sci 55, 2741-2757.4. Righter, K., et al.(2020)Earth and Planetary Science Letters,552, 116590.

pressure

Understanding and Mitigating Tip Leakage and Endwall Losses in High Pressure Ratio Cores

Reducing endwall and tip secondary flow losses will be a key enabler for the next generation of commercial and military air transport and will be an improvement on the state-of-the-art in turbine loss reduction strategies. The objective of this research is three-fold: 1) To improve understanding of endwall secondary flow and tip clearance losses 2) To develop novel technologies to mitigate these losses and test them in low-speed cascade and rig environments 3) To validate predictive tools To accomplish these objectives, Pratt & Whitney (P&W) has teamed with Pennsylvania State University (PSU) to experimentally test new features designed by P&W. P&W will create new rim-cavity features to reduce secondary flow loss and improve purge flow cooling effectiveness and new blade tip features to manage leakage flows and reduce tip leakage secondary flow loss. P&W is currently developing technologies in these two areas that expect to be assimilated in the N+2/N+3 generation of commercial engines.

Turbomachinery

Flow tests of a single fuel element coolant channel for a compact fast reactor for space power

Water flow tests were conducted on a single-fuel-element cooling channel for a nuclear concept to be used for space power. The tests established a method for measuring coolant flow rate which is applicable to water flow testing of a complete mockup of the reference reactor. The inlet plenum-to-outlet plenum pressure drop, which approximates the overall core pressure drop, was measured and correlated with flow rate. This information can be used for reactor coolant flow and heat transfer calculations. An analytical study of the flow characteristics was also conducted.

Springborn, R. H.

Flow Analysis of a Gas Turbine Low- Pressure Subsystem

The NASA Lewis Research Center is coordinating a project to numerically simulate aerodynamic flow in the complete low-pressure subsystem (LPS) of a gas turbine engine. The numerical model solves the three-dimensional Navier-Stokes flow equations through all components within the low-pressure subsystem as well as the external flow around the engine nacelle. The Advanced Ducted Propfan Analysis Code (ADPAC), which is being developed jointly by Allison Engine Company and NASA, is the Navier-Stokes flow code being used for LPS simulation. The majority of the LPS project is being done under a NASA Lewis contract with Allison. Other contributors to the project are NYMA and the University of Toledo. For this project, the Energy Efficient Engine designed by GE Aircraft Engines is being modeled. This engine includes a low-pressure system and a high-pressure system. An inlet, a fan, a booster stage, a bypass duct, a lobed mixer, a low-pressure turbine, and a jet nozzle comprise the low-pressure subsystem within this engine. The tightly coupled flow analysis evaluates aerodynamic interactions between all components of the LPS. The high-pressure core engine of this engine is simulated with a one-dimensional thermodynamic cycle code in order to provide boundary conditions to the detailed LPS model. This core engine consists of a high-pressure compressor, a combustor, and a high-pressure turbine. The three-dimensional LPS flow model is coupled to the one-dimensional core engine model to provide a "hybrid" flow model of the complete gas turbine Energy Efficient Engine. The resulting hybrid engine model evaluates the detailed interaction between the LPS components at design and off-design engine operating conditions while considering the lumped-parameter performance of the core engine.

Veres, Joseph P.

Potential use of ceramic coating as a thermal insulation on cooled turbine hardware

An analysis was made to determine the potential benefits of using a ceramic thermal insulation coating of calcia-stabilized zirconia on cooled engine parts. The analysis was applied to turbine vanes of a high temperature and high pressure core engine and a moderate temperature and low pressure research engine. Measurements made during engine operation showed that the coating substantially reduced vane metal wall temperatures. Evaluation of the durability of the coating on turbine vanes and blades in a furnace and engine were encouraging.

Liebert, C. H.

Amplified wind turbine apparatus

An invention related to the utilization of wind energy and increasing the effects thereof for power generation is described. Amplified wind turbine apparatus is disclosed wherein ambient inlet air is prerotated in a first air rotation chamber having a high pressure profile increasing the turbulence and Reynolds number thereof. A second rotation chamber adjacent and downstream of the turbine has a low pressure core profile whereby flow across the turbine is accelerated and thereafter exits the turbine apparatus through a draft anti-interference device. Interference with ambient winds at the outlet of the turbine apparatus is thus eliminated. Pivotable vanes controlled in response to prevailing wind direction admit air to the chambers and aid in imparting rotation. A central core may be utilized for creating the desired pressure profile in the chamber.

Hein, L. A.

F-18 high alpha research vehicle surface pressures - Initial in-flight results and correlation with flow visualization and wind-tunnel data

Flight tests with the NASA F-18 high-alpha research vehicle (HARV) have yielded pressure distributions at angles of attack from 10 to 50 deg, at Mach 0.23 to 0.6, at five fuselage forebody stations and three on the leading-edge extensions (LEXs). Correlations are made between these data and both previously obtained HARV flow visualizations and wind tunnel model test results. The general trend is one in which the forebody's maximum suction pressure peaks increase in magnitude, after their first appearance at alpha of about 19 deg, with increasing alpha. LEX pressure-distribution trends involve the inward progression of the maximum suction peaks, an increase in the magnitude of the maximum pressure peaks up to pressure core breakdown, and the decrease and general flattening of the pressure distribution beyond the LEX primary vortex breakdown.

Fisher, David F.

Quiet, Clean, Short-Haul, Experimental Engine (QCSEE) Under-The-Wing (UTW) engine acoustic design

The acoustic considerations involved in the low source noise basic engine design and the design procedures followed in the development of the under-the-wing (UTW) engine boilerplate and composite nacelle acoustic treatment designs are presented. Laboratory experiments, component tests, and scale model and engine tests supporting the UTW engine acoustic design are referenced. Acoustic design features include a near-sonic inlet, low fan and core pressure ratios, low fan tip speed, high and low frequency stacked core treatment, multiple thickness treatment, and fan frame and stator vane treatment.

Sowers, H. D.

Quiet, Clean, Short-Haul Experimental Engine (QCSEE) Over-The-Wing (OTW) engine acoustic design

The acoustic considerations involved in the low source noise basic engine design and the design procedures followed in the development of the over-the-wing (OTW) nacelle acoustic treatment design are presented. Laboratory experiments, component tests, and scale model and engine tests supporting the OTW engine acoustic design are referenced. Acoustic design features include a near-sonic inlet, low fan and core pressure ratios, low fan tip speed, high and low frequency stacked core treatment, multiple thickness treatment, and fan frame and stator vane treatment.

Sowers, H. D.

A lunar core and the moon's magnetic field

The suggestion that the moon's magnetic field is due to adiabatic magnetohydrodynamic convection of a molten core has been made by a number of recent authors. Considerations based on petrology, mass and rotational inertia limit the size of this hypothetical core to a few hundred kilometers at the most. A proposal has been made that this core is either molten iron or iron sulfide. The properties are known of both molten iron and iron-sulfide at lunar core pressures. No way can be found to maintain circulation in a hypothetical lunar core, as circulation is contingent upon a temperature gradient being greater than the adiabatic gradient, or an internal heat source.

Kennedy, G. C.

The stability of coronal loops - Finite-length and pressure-profile limits

Results are described from a quickly converging, necessary-and-sufficient, MHD-stability test for coronal-loop models. The primary stabilizing influence arises from magnetic line tying at the photosphere, and this end conditions requires a series expansion of possible loop excitations. The stability boundary is shown to quickly approach a limit as the number of terms increases, providing a critical length for the loop in proportion to its transverse magnetic scale. Several models of force-free-field profiles are tested and the stability behavior of a localized current channel, embedded in an external current-free region, is shown to be superior to that of other, broader, current profiles. Pressure-gradient effects, leading to increased or decreased stability, are shown to be amplified by line tying. Long loops must either conduct low net current, or exhibit an axial-field reversal coexisting with a low-pressure core. The limits on stability depend on the magnetic aspect ratio, the plasma-to-magnetic pressure ratio, and the field orientation at the loop edge. Applications of these results to the structure of coronal loops are described.

Einaudi, G.

Aerothermodynamics Technical Working Group: 2008 Turbomachinery Technology Assessment and Recommendations

This report documents the 2008 Turbomachinery Technology Assessment and Recommendations of the NASA-led Aerothermodynamics Technical Working Group (TWG). It includes technology review, assessment, and recommendation for future research and development. The areas covered are summarized as follows. Inlet Flow Distortion Sensitivity and Stability, Tip Leakage Flows in High-Pressure Cores, Endwall Contouring, Turbine Tip Flows, Combustor and Cooled-Turbine Interaction, Highly Loaded Low-Pressure Turbines.

Heidmann, James D.

Computational Simulations of a Three-Dimensional High-Lift Wing

Highly resolved computational simulations of a three-dimensional high-lift wing are presented. The steady Reynolds Averaged Navier-Stokes computations are geared towards understanding the flow intricacies associated with inboard and outboard flap side edges. Both moderate and high flap deflections are simulated. Computed surface pressure fields accurately capture the footprint of vortices at flap side edges and are in excellent agreement with pressure sensitive paint measurements. The computations reveal that the outboard vortex possesses higher rotational velocities and lower core pressure than the inboard vortex and therefore is susceptible to severe vortex breakdown.

Khorrami, M. R.

STOVL Jet Efflux Characteristics and their Influence on Propulsion-Induced Effects

Jet efflux characteristics are a determining factor in STOVL aircraft aero/propulsion induced effects. Subcritical jets may have core lengths which range up to 6 diameters. The shorter core length jets tend to entrain ambient air more rapidly, inducing larger hover lift losses, and decay more rapidly, reducing adverse ground erosion. In transition flight, shorter core length jets show a larger decrease in the lift loss and a slight decrease in nose-up pitching moment. Supercritical pressure ratio jets tend to have longer, higher pressure core lengths with a greater hazard for ground erosion. The decay in the fully developed region is similar for both subcritical and supercritical pressure ratio jets. For subsonic jets the decay is inversely proportional to the distance from the jet exit. In ground effect the supercritical jet induces an oscillating pressure distribution on the ground with reflected shocks and expansions which can increase ground erosion and, at low ground heights, cause non-monotonic lift loss variations.

Arledge, Tom

Acoustic design of the QCSEE propulsion systems

Acoustic design features and techniques employed in the Quiet Clean Short-Haul Experimental Engine (QCSEE) Program are described. The role of jet/flap noise in selecting the engine fan pressure ratio for powered lift propulsion systems is discussed. The QCSEE acoustic design features include a hybrid inlet (near-sonic throat velocity with acoustic treatment); low fan and core pressure ratios; low fan tip speeds; gear-driven fans; high and low frequency stacked core noise treatment; multiple-thickness treatment; bulk absorber treatment; and treatment on the stator vanes. The QCSEE designs represent and anticipated acoustic technology improvement of 12 to 16 PNdb relative to the noise levels of the low-noise engines used on current wide-body commercial jet transport aircraft.

Loeffler, I. J.

Effects of Double-Leakage Tip Clearance Flow on the Performance of a Compressor Stage with a Large Rotor Tip Gap

Effects of a large rotor tip gap on the performance of a one and half stage axial compressor are investigated in detail with a numerical simulation based on LES and available PIV data. The current paper studies the main flow physics, including why and how the loss generation is increased with the large rotor tip gap. The present study reveals that when the tip gap becomes large, tip clearance fluid goes over the tip clearance core vortex and enters into the next blade's tip gap, which is called double-leakage tip clearance flow. As the tip clearance flow enters into the adjacent blade's tip gap, a vortex rope with a lower pressure core is generated. This vortex rope breaks up the tip clearance core vortex of the adjacent blade, resulting in a large additional mixing. This double-leakage tip clearance flow occurs at all operating conditions, from design flow to near stall condition, with the large tip gap for the current compressor stage. The double-leakage tip clearance flow, its interaction with the tip clearance core vortex of the adjacent blade, and the resulting large mixing loss are the main flow mechanism of the large rotor tip gap in the compressor. When the tip clearance is smaller, flow near the end wall follows more closely with the main passage flow and this double-leakage tip clearance flow does not happen near the design flow condition for the current compressor stage. When the compressor with a large tip gap operates at near stall operation, a strong vortex rope is generated near the leading edge due to the double-leakage flow. Part of this vortex separates from the path of the tip clearance core vortex and travels from the suction side of the blade toward the pressure side of the blade. This vortex is generated periodically at near stall operation with a large tip gap. As the vortex travels from the suction side to the pressure side of the blade, a large fluctuation of local pressure forces blade vibration. Nonsynchronous blade vibration occurs due to this vortex as the frequency of this vortex generation is not the same as the rotor. The present investigation confirms that this vortex is a part of separated tip clearance vortex, which is caused by the double-leakage tip clearance flow.

flow