Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “practical conditions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Early Failure of Lithium–Sulfur Batteries at Practical Conditions: Crosstalk between Sulfur Cathode and Lithium Anode

Lithium–sulfur (Li–S) batteries are one of the most promising next-generation energy storage technologies due to their high theoretical energy and low cost. However, Li–S cells with practically high energy still suffer from a very limited cycle life with reasons which remain unclear. Here, through cell study under practical conditions, it is proved that an internal short circuit (ISC) is a root cause of early cell failure and is ascribed to the crosstalk between the S cathode and Li anode. The cathode topography affects S reactions through influencing the local resistance and electrolyte distribution, particularly under lean electrolyte conditions. The inhomogeneous reactions of S cathodes are easily mirrored by the Li anodes, resulting in exaggerated localized Li plating/stripping, Li filament formation, and eventually cell ISC. Manipulating cathode topography is proven effective to extend the cell cycle life under practical conditions. The findings of this work shed new light on the electrode design for extending cycle life of high-energy Li–S cells, which are also applicable for other rechargeable Li or metal batteries.

25 ENERGY STORAGE↗
DOE OSTI2021

Enabling High-Performance NASICON-Based Solid-State Lithium Metal Batteries Towards Practical Conditions

Solid-state lithium metal batteries (SSLMBs) are promising next-generation high-energy rechargeable batteries. However, the practical energy densities of the reported SSLMBs have been significantly overstated due to the use of thick solid-state electrolytes, thick lithium (Li) anodes, and thin cathodes. Here, a high-performance NASICON-based SSLMB using a thin (60 µm) Li 1.5 Al 0.5 Ge 1.5 (PO 4 ) 3 (LAGP) electrolyte, ultrathin (36 µm) Li metal, and high-loading (8 mg cm -2 ) LiFePO 4 (LFP) cathode is reported. The thin and dense LAGP electrolyte prepared by hot-pressing exhibits a high Li ionic conductivity of 1 × 10 -3 S cm -1 at 80 °C. The assembled SSLMB can thus deliver an increased areal capacity of ≈1 mAh cm -2 at C/5 with a high capacity retention of ≈96% after 50 cycles under 80 °C. Furthermore, it is revealed by synchrotron X-ray absorption spectroscopy and in situ high-energy X-ray diffraction that the side reactions between LAGP electrolyte and LFP cathode are significantly suppressed, while rational surface protection is required for Ni-rich layered cathodes. This study provides valuable insights and guidelines for the development of high-energy SSLMBs towards practical conditions.

25 ENERGY STORAGE↗
DOE OSTI2022

Pushing Lithium–Sulfur Batteries towards Practical Working Conditions through a Cathode–Electrolyte Synergy

Abstract The commercialization of lithium–sulfur (Li−S) batteries is still hindered by the unsatisfactory cell performance under practical working conditions, which is mainly caused by the sluggish cathode redox kinetics, severe polysulfide shuttling, and poor Li stripping/plating reversibility. Herein, we report an effective strategy by combining Se‐doped S hosted in an ordered macroporous framework with a highly fluorinated ether (HFE)‐based electrolyte to simultaneously address the aforementioned issues in both cathode and anode. A reversible and stable high areal capacity of >5.4 mAh cm −2 with high Coulombic efficiency >99.2 % can be achieved under high areal Se/S loading (5.8 mg cm −2 ), while the underlying mechanism was further revealed through synchrotron X‐ray probes and Time‐of‐Flight Secondary Ion Mass Spectrometry (ToF‐SIMS). The practical application potential was further evaluated at low (0 °C) and high (55 °C) temperatures under high areal Se/S loading (>5.0 mg cm −2 ) and thin Li metal (40 μm).

Zhao, Chen↗
DOE OSTI2022

Pushing Lithium–Sulfur Batteries towards Practical Working Conditions through a Cathode–Electrolyte Synergy

The commercialization of lithium-sulfur (Li-S) batteries is still hindered by the unsatisfactory cell performance under practical working conditions, which is mainly caused by the sluggish cathode redox kinetics, severe polysulfide shuttling, and poor Li striping/platting reversibility. We reported an effective strategy by combining Se-doped S hosted in an ordered macroporous framework with highly fluorinated ether (HFE)-based electrolyte to simultaneously address the aforementioned issues in both cathode and anode. A reversible and stable high areal capacity of > 5.4 mAh cm -2 with high coulombic efficiency > 99.2% can be achieved under high areal Se/S loading (5.8 mg cm -2 ), while the underlying mechanism was further revealed through synchrotron X-ray probes and Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS). The practical application potential was further evaluated at low (0 °C) and high (55 °C) temperatures under high areal Se/S loading (> 5.0 mg cm -2 ) and thin Li metal (40 µm).

25 ENERGY STORAGE↗
DOE OSTI2020

Multi-modal surface analysis of porous films under operando conditions

Practical catalysts with a porous framework, such as zeolites, host catalytic reactions at active sites engrained in the pores and channels of the scaffold. The mechanism of interaction at these active sites, defining catalyst performance, remains elusive, in large part, due to the lack of surface characterization methods available for thick films or powders. Here, we present thin film analogs of practical catalysts that allow for the implementation of surface characterization tools, including advanced microscopy and operando spectroscopy methodologies. Specifically, we investigated bilayer silica, MFI nanosheets, and UiO-66 thin films using a multi-modal approach addressing film growth, characterization, and gas adsorption aimed at understanding catalytic activity, reactivity, and selectivity properties, as defined by molecular-level changes in the reaction mechanism.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Morphophysiological Plant Phenotyping for the Development of Plant Breeding Under Drought and Heat Conditions: A Practical Approach

ABSTRACT Currently, the breeding programs focus their efforts on identifying and developing tolerant genotypes to adverse conditions, such as drought and high temperatures. In this context, the physiological approach, which involves phenotyping several traits, is useful for breeding programs. Leaf photosynthetic traits have become one of the main objectives to be evaluated for breeders due to their relationship with improving grain yield and biomass production. Gas exchange ( Ge ) and chlorophyll “a” fluorescence ( Chf ) are the main tools to characterize the photosynthetic activity in real time at the leaf level. Consequently, several association studies using proximal and nonproximal sensing (e.g., RGB, thermography) have been developed. However, for the correct application of this breeding approach, it is essential to have a basic knowledge of both the physiological principles involved in the readings and the limitations of phenotyping due to the characteristics of the devices available on the market. This revision also covers other traits, such as the morphological and anatomical characteristics of leaves and roots, and the use of isotopes complementing Ge and Chf measurements.

Estrada, Félix [Instituto de Investigaciones Agrop↗
DOE OSTI2020

Lithium Metal Anodes with Nonaqueous Electrolytes

High-energy rechargeable lithium (Li) metal batteries (LMBs) with Li metal anode (LMA) were first developed in the 1970s, but their practical applications have been hindered by the safety and low-efficiency concerns related to LMA. Recently, a worldwide effort on LMA-based rechargeable LMBs has been revived to replace graphite-based, Li-ion batteries because of the much higher energy density that can be achieved with LMBs. Herein, this review focuses on the recent progress on the stabilization of LMA with nonaqueous electrolytes and reveals the fundamental mechanisms behind this improved stability. Various strategies that can enhance the stability of LMA in practical conditions and perspectives on the future development of LMA are also discussed. These strategies include the use of novel electrolytes such as superconcentrated electrolytes, localized high-concentration electrolytes, and highly fluorinated electrolytes, surface coatings that can form a solid electrolyte interphase with a high interfacial energy and self-healing capabilities, development of “anode-free” Li batteries to minimize the interaction between LMA and electrolyte, approaches to enable operation of LMA in practical conditions, etc. Combination of these strategies ultimately will lead us closer to the large-scale application of LMBs which often is called the “Holy Grail” of energy storage systems.

25 ENERGY STORAGE↗
DOE OSTI2026

Deciphering the Dynamic Balance Between Solvation Strength and Polysulfides Reaction Heterogeneity in Practical Lithium‐Sulfur Batteries

Achieving stable interfacial chemistry in lithium–sulfur batteries under practical conditions remains a key barrier to commercialization. Here, we demonstrate that interfacial dynamics can be effectively regulated by coupling solvation-power control with intrinsic heterogeneity of sulfur redox chemistry through the introduction of a weakly solvating fluorinated cosolvent, LIB 1200ET (1200ET). Compared with conventional fluorinated ethers, 1200ET efficiently shifts Li + solvation environment toward a more non-coordinated configuration at low volume fractions, enabling substantial solvation modulation without significantly impairing sulfur redox kinetics. This solvation transition weakens Li + –solvent interactions while strengthening Li + –anion and Li + –lithium polysulfide (LPS) coordination, suppressing LPS solubility and promoting reconstruction of solid–electrolyte interphase (SEI). Regulated LPS chemistry, together with 1200ET, leads to formation of a S 4+ -rich, LiF-reinforced SEI with enhanced ionic conductivity and mechanical robustness. Spatially resolved sulfur K-edge X-ray absorption spectroscopy on pouch cells reveals pronounced current-density-dependent chemical heterogeneity, distinguishing kinetically dominated and solvation-controlled regions. Under practical conditions (3.7 mg cm −2 sulfur loading, E/S = 6 µL mg −1 ), a single-layer pouch cell delivers 527 mAh g −1 over 200 cycles at C/3, while an Ah-level multilayer pouch cell achieves an energy density of 358 Wh kg −1 . These results establish non-coordinating cosolvent-driven solvation engineering as a scalable strategy for practical Li–S batteries.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Tailoring the Mass Transport to Achieve High-Performing Unitized Regenerative Fuel Cells Considering Practical Operating Conditions

Unitized regenerative fuel cells (URFCs) convert electrical energy to chemical bonds in hydrogen during charge and convert chemical energy to output electricity during discharge, offering a promising solution to long-term energy storage. Recent studies indicate that the round-trip-voltaic efficiency (RTE) and longevity of URFCs are limited by complex mass transport during charging and discharging. Here, we first investigate how different porous transport layer (PTL) structures can impact URFC performance. The preferred PTL has a low tortuosity and high porosity, leading to a high RTE above 50% at 1 A cm −2 using Nafion 212. Moreover, thicker membranes, such as Solvay 90, are required to ensure mechanical stability and minimize H 2 crossover when operating under high differential pressure. Although this assembly inevitably leads to a higher ohmic loss, the RTE can be improved by further tailoring the electrode structures to facilitate mass transport by using supported catalyst, which still achieves over 50% RTEs at 1 A cm −2 . Optimization of porous structure to mitigate mass transport resistance with appropriate materials down selection considering practical application requirements can be a key design principle for achieving high-performing URFCs.

25 ENERGY STORAGE↗
DOE OSTI2023

Oxygen redox and instability in energy ceramics

Energy ceramics, including solid electrolytes and catalysts for high-temperature fuel/electrolysis cells and oxide cathodes for batteries, often experience harsh chemical and electrochemical conditions. Practical and new applications require that these devices are operated under ever more extreme redox conditions for higher energy density and power density. This challenges the stability of the energy ceramic materials and calls for a better understanding of the degradation mechanisms and innovative strategies for degradation mitigation. Here we present our analysis and perspectives on degradation phenomena in three categories of electrochemical devices of practical interest, including solid oxide fuel/electrolysis cells, protonic ceramic fuel/electrolysis cells, and lithium-ion batteries. We also discuss the stability/degradation of the key ceramic components from the view of oxygen redox and instability arising from anodic bias, transport limitation, and coupled electro-chemo-mechanics at the virtual and physical interfaces. We hope these perspectives provide design principles for electroceramic chemistry, microstructure, and processing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Newton trust-region methods with primary variable switching for simulating high temperature multiphase porous media flow

Coupling multiphase flow with energy transport due to high temperature heat sources introduces significant new challenges since boiling and condensation processes can lead to dry-out conditions with subsequent re-wetting. The transition between two-phase and single-phase behavior can require changes to the primary dependent variables adding discontinuities as well as extending constitutive nonlinear relations to extreme physical conditions. Practical simulations of large-scale engineered domains lead to Jacobian systems with a very large number of unknowns that must be solved efficiently using iterative methods in parallel on high-performance computers. Performance assessment of potential nuclear repositories, carbon sequestration sites and geothermal reservoirs can require numerous Monte-Carlo simulations to explore uncertainty in material properties, boundary conditions, and failure scenarios. Due to the numerical challenges, standard NR iteration may not converge over the range of required simulations and require more sophisticated optimization method like trust-region. In this study, we use the open-source simulator PFLOTRAN for the important practical problem of the safety assessment of future nuclear waste repositories in the U.S. DOE geologic disposal safety assessment Framework. The simulator applies the PETSc parallel framework and a backward Euler, finite volume discretization. We demonstrate failure of the conventional NR method and the success of trust-region modifications to Newton’s method for a series of test problems of increasing complexity. Trust-region methods essentially modify the Newton step size and direction under some circumstances where the standard NR iteration can cause the solution to diverge or oscillate. Furthermore, we show how the Newton Trust-Region method can be adapted for Primary Variable Switching (PVS) when the multiphase state changes due to boiling or condensation. The simulations with high-temperature heat sources which led to extreme nonlinear processes with many state changes in the domain did not converge with NR, but they do complete successfully with the trust-region methods modified for PVS. This implementation effectively decreased weeks of simulation time needing manual adjustments to complete a simulation down to a day. Finally, we show the strong scalability of the methods on a single node and multiple nodes in an HPC cluster.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

A Fluorinated Lewis Acidic Organoboron Tunes Polysulfide Complex Structure for High–Performance Lithium–Sulfur Batteries

Many challenges in lithium-sulfur (Li–S) batteries are associated with the radical change in lithium polysulfide (LPS) solubility during cycling, but chemical approaches to address such inconsistency are still lacking. Here, the use of a strong Lewis acidic fluorinated organoboron, tri(2,2,2-trifluoroethyl) borate (TFEB), is reported as a multi-functional mediator to simultaneously overcome multiple technical barriers in practical Li–S batteries. TFEB acts as an anion acceptor and forms strong molecular complexes with Lewis basic LPS. The TFEB-LPS complexes have consistent solubility across the full polysulfide spectrum and deliver several times improved better redox kinetics, unlocking a true redox catalytic mechanism that covers the majority of redox events in thick sulfur cathodes. As a result, Li–S batteries evaluated under practical conditions exhibit significantly improved discharge capacity, rate capability, and cycling stability with the addition of the TFEB additive. More importantly, TFEB also contributes to the stabilization of lithium anode in the presence of polysulfides by generating strong interfacial film. These attributes significantly improve the cycling stability of practical Li–S pouch cells, which are assembled with a unit energy density of 219 Wh kg –1 . Finally, the results provide new molecular insights on the design of unlocking solvation networks of practical Li–S systems.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Systematic Evaluation of Carbon Hosts for High-Energy Rechargeable Lithium-Metal Batteries

Rechargeable lithium batteries (RLBs) have attracted wide attention for achieving high energy and low cost, but the poor stability of the Li anode has remained as a large challenge. In the last several years, great efforts have been made to develop carbon anode structures for RLB applications. A wide range of carbon structures as well as many chemical modification strategies have been investigated to improve the Coulombic efficiency and extend the cycle life of the anodes or the cells. However, currently there is no clear conclusion on key factors that determine the performance of such the types of carbon structures due to the wide range of experimental conditions used in such studies. In this study, we systematically evaluated and compared the electrochemical properties of representative carbon anode materials as well as chemically functionalized carbon materials in different electrolytes. We have found that chemical functionalization, metallic loading, and the types of micro or nano-structures all have an effect on Li deposition/stripping process, but by far the most critical factor is the nature of the electrolytes. All carbon materials produced poor Coulombic efficiency and cycle life in conventional carbonate or ether-based electrolytes. However, when a Li metal compatible is used, the average Coulombic efficiency of Li metal deposition on all carbon structures is increased to 99% or higher. This study provides critical lessons on the directions for carbon anodes for RLBs. Based on these findings, we constructed Li metal coin cells using prelithiated hard carbon, LiNi0.6Mn0.2Co0.2O2 (NMC622) cathode, and compatible electrolyte and tested the cells under conditions of lean electrolyte, lean Li metal and high cathode loading required for more than 300 Wh kg-1 specific energy. More than 200 stable cycles were demonstrated with over 80% capacity retention. Furthermore, the existing challenges and potential approaches have been discussed to further extend the cyclability of lithium-metal batteries under practical conditions.

Liu, Yao↗
DOE OSTI2023

Solid Solvation Assisted Electrical Doping Conserves High‐Performance in 500 nm Active Layer Organic Solar Cells

Abstract Organic solar cells (OSCs) process fascinating solution‐printing capability to achieve low‐cost and large‐scale manufacture. However, the rapid power conversion efficiency (PCE) decay with active layer thickness enlargement inhibits the implement of OSCs’ potential advantages. To overcome the bottlenecks of PCE decay in thick active layer OSCs, the electrical doping with componential selectivity in bulk heterojunction (BHJ) film is achieved by introducing a solid solvation additive. Benefiting from the higher exciton splitting efficiency together with the longer drift (L dr ) and diffusion (L diff ) lengths, an OSC with 100 nm BHJ film demonstrates a PCE increment from 16.44% to 18.24% with prolonged dark and illuminated storage stabilities. Applying the solid solvation assisted (SSA) doping method in the OSCs with 500 nm active layer, the PCE significantly increases by 31.9%, from the original value of 11.79% to 15.55%. It further improves to 15.84% in a ternary blend thick‐film device, which is the record value to the best of our knowledge. Besides, the SSA doping narrows the PCE gap between the 0.04 and 1 cm 2 devices. All improvements demonstrate the great potential of SSA doping for OSC commercial manufacture, since it optimizes the photovoltaic performance under all practical conditions of long‐term, thick‐film, and large‐area.

Chemistry↗
DOE OSTI2021

Textured Electrodes: Manipulating Built-In Crystallographic Heterogeneity of Metal Electrodes via Severe Plastic Deformation

Control of crystallography of metal electrodeposit films has recently emerged as a key to achieving long operating lifetimes in next-generation batteries. It is reported that the large crystallographic heterogeneity, e.g., broad orientational distribution, that appears characteristic of commercial metal foils, results in rough morphology upon plating/stripping. On this basis, an accumulative roll bonding (ARB) methodology—a severe plastic deformation process—is developed. Zn metal is used as a first example to interrogate the concept. It is demonstrated that the ARB process is highly effective in achieving uniform crystallographic control on macroscopic materials. After the ARB process, the Zn grains exhibit a strong (002) texture (i.e., [002] Zn //ND). The texture transitions from a classical bipolar pattern to a nonclassical unipolar pattern under large nominal strain eliminate the orientational heterogeneity of the foil. The strongly (002)-textured Zn remarkably improves the plating/stripping performance by nearly two orders of magnitude under practical conditions. The performance improvements are readily scaled to achieve pouch-type full batteries that deliver exceptional reversibility. The ARB process can, in principle, be applied to any metal chemistry to achieve similar crystallographic uniformity, provided the appropriate temperature and accumulated strains are employed. Here this concept is evaluated using commercial Li and Na foils, which, unlike Zn (HCP), are BCC crystals. The simple process for creating strong textures in both hexagonal and cubic metals and illustrating the critical role such built-in crystallography plays underscores opportunities for developing highly reversible thin metal anodes (e.g., hexagonal Zn, Mg, and cubic Li, Na, Ca, Al).

36 MATERIALS SCIENCE↗
DOE OSTI2024

Fast Charge‐Transfer Rates in Li‐CO 2 Batteries with a Coupled Cation‐Electron Transfer Process

Li-CO 2 batteries with a high theoretical energy density (1876 Wh kg −1 ) have unique benefits for reversible carbon fixation for energy storage systems. However, due to lack of stable and highly active catalysts, the long-term operation of Li-CO 2 batteries is limited to low current densities (mainly <0.2 mA cm −2 ) that are far from practical conditions. In this work, it is discovered that, with an ionic liquid-based electrolyte, highly active and stable transition metal trichalcogenide alloy catalysts of Sb 0.67 Bi 1.33 X 3 (X = S, Te) enable operation of the Li-CO 2 battery at a very high current rate of 1 mA cm −2 for up to 220 cycles. It is revealed that: i) the type of chalcogenide (Te vs S) significantly affects the electronic and catalytic properties of the catalysts, ii) a coupled cation-electron charge transfer process facilitates the carbon dioxide reduction reaction (CO 2 RR) occurring during discharge, and iii) the concentration of ionic liquid in the electrolyte controls the number of participating CO 2 molecules in reactions. A combination of these key factors is found to be crucial for a successful operation of the Li-CO 2 chemistry at high current rates. This work introduces a new class of catalysts with potential to fundamentally solve challenges of this type of batteries.

25 ENERGY STORAGE↗
DOE OSTI2025

Fine‐Tuning Li‐Ion Solvation Structure by Enhanced Solvent‐Diluent Interactions for Long‐Cycling Lithium Metal Batteries

Achieving durable lithium (Li) metal anodes in liquid electrolytes remains challenging, primarily due to the instability of the formed solid-electrolyte interphases (SEIs). Modulating the Li-ion solvation structures is pivotal in forming a stable SEI for stabilizing Li metal anodes. Here a strategy is developed to fine-tune the Li-ion solvation structures through enhanced dipole–dipole interactions between the Li-ion-coordinated solvent and the non-Li-ion-coordinating diluent, for creating a stable SEI in the developed binary salt electrolyte. The enhanced dipole–dipole interactions weaken the coordination between Li-ions and the solvents while strengthening the interaction between Li-ions and dual anions, thereby facilitating the Li-ion transport and a robust anion-derived SEI with a distinct bilayer structure. Consequently, the developed electrolyte exhibited exceptional electrochemical performance in high energy-density Li||LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) cells, with long calendar life, stable cyclability at 1 C, and reliable operation between 25 and −20 °C, and it also demonstrat remarkable cycling stability for a Li||NMC811 pouch cell with projected energy density of 402 Wh kg −1 , maintaining 80% capacity retention over 606 cycles under practical conditions.

25 ENERGY STORAGE↗
DOE OSTI2021

Palladium/Ferrierite versus Palladium/SSZ‐13 Passive NOx Adsorbers: Adsorbate‐Controlled Location of Atomically Dispersed Palladium(II) in Ferrierite Determines High Activity and Stability**

Abstract Pd‐loaded FER and SSZ‐13 zeolites as low‐temperature passive NOx adsorbers (PNA) are compared under practical conditions. Vehicle cold start exposes the material to CO under a range of concentrations, necessitating a systematic exploration of the effect of CO on the performance of isolated Pd ions in PNA. The NO release temperature of both adsorbers decreases gradually with an increase in CO concentration from a few hundred to a few thousand ppm. This beneficial effect results from local nano‐“hot spot” formation during CO oxidation. Dissimilar to Pd/SSZ‐13, increasing the CO concentration above ≈1000 ppm improves the NOx storage significantly for Pd/FER, which was attributed to the presence of Pd ions in FER sites that are shielded from NOx. CO mobilizes this Pd atom to the NOx accessible position where it becomes active for PNA. This behavior explains the very high resistance of Pd/FER to hydrothermal aging: Pd/FER materials survive hydrothermal aging at 800 °C in 10 % H 2 O vapor for 16 hours with no deterioration in NOx uptake/release behavior. Thus, by allocating Pd ions to the specific microporous pockets in FER, we have produced (hydro)thermally stable and active PNA materials.

Khivantsev, Konstantin↗