Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “polyamides”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Rigid-Rod Sulfonated Polyamide as an Aqueous-Processable Binder for Li-Ion Battery Electrodes

Polymer binders are important components of most battery electrodes, ensuring high performance and long-term durability. Increasing demand for lithium-ion batteries in the automotive, stationary power, and portable electronics industries calls for a greener binder to replace poly(vinylidene difluoride) (PVDF). We evaluate the performance of aqueous solution-processed electrodes prepared with a rigid-rod polymer binder, poly(2,2'-disulfonyl-4,4'-benzidine terephthalamide) (PBDT). The polyamide backbone and double-helical configuration of PBDT give rise to its mechanical strength and rigidity, and its functional nature (H-bonding amides and sulfonates) can provide specific binding with electrode particles. LiFePO 4 electrodes prepared with 3 wt% PBDT show mechanical integrity and cycling stability, achieving over 1000 cycles at 4C rate with negligible capacity decay. These electrodes demonstrate comparable rate performance with their PVDF counterparts while eliminating fluorine from the electrode as well as the organic solvents needed for processing. Furthermore, this study reveals that PBDT holds great potential as a binder for advanced sustainable batteries.

25 ENERGY STORAGE↗
DOE OSTI2023

Orientation matters: Measuring the correct surface of polyamide membranes with quartz crystal microbalance

The surface of polyamide reverse osmosis (RO) membranes which regulates interface-dominated phenomena, such as partitioning and fouling, is the one facing the feed during operation. However, the opposite surface of the polyamide selective layer, the one facing the permeate and in contact with the polysulfone porous support, is commonly analyzed in quartz crystal microbalance (QCM) measurements due to limitations of state-of-the-art transfer methodologies. Such measurements on the back surface cannot be generalized because the polyamide layer is chemically and morphologically asymmetric. Herein, we introduce a simple method to coat QCM sensors with polyamide active layers in the correct orientation (i.e., exposing their front surface) and show that interface-dominated phenomena differ significantly between orientations. We start by describing a transfer protocol to coat any surface with a polyamide layer on its front surface orientation. We then systematically analyze the chemical and morphological differences between the two surfaces of the polyamide layer of a commercial RO membrane. Finally, we demonstrate that interface-dominated phenomena depend on the orientation by showing that NaCl partitioning at pH 6 was 1.3 to 2.3-fold higher on the front surface and that organic fouling with humic acid occurred at a lower rate on this surface. The new method presented herein enables measurements on the front surface of polyamide RO membranes, which should be the standard in any future QCM studies.

Fouling behavior↗
DOE OSTI2024

Structural Effects on Solubility and Crystallinity in Polyamide Ionomers

Although polyamides have been an industrial staple for decades, their solubility and processability remain limited due to the strong hydrogen bonding between amide groups. Here, we report a family of polyamides in which aryl rings, alkyl spacers, sulfonate groups, and amide linkages are regularly spaced along the polymer backbone, allowing us to probe the structural elements that affect processability. We accessed these polymers through a synthetic route based on an expanded diamine monomer and characterized them through a range of physical and spectroscopic techniques. Our results show that the combination of sulfonate groups with increased amide content results in highly soluble polymers, which can dissolve in polar solvents such as water, methanol, and N,N-dimethylformamide. Infrared spectroscopy on the solid polymers shows that the aliphatic amides engage in hydrogen bonding with the sulfonate groups, thus inhibiting ion aggregation, crystallization, and microphase separation. These findings expand the avenue to sulfonate-containing polyamide chemistry and provide design rules for the synthesis of more processable ionic polyamides.

amides↗
DOE OSTI2023

Unveiling the microstructural evolution of carbon fibers derived from polyamide-6

Polyacrylonitrile-based carbon fibers have dominated the industry for decades, but the high cost of polyacrylonitrile has prevented the widespread adoption of carbon fiber in high-volume structural applications. As such, a significant amount of research has been dedicated to finding an alternative, low-cost carbon fiber precursor. In this work, carbon fibers were produced from polyamide-6 using metal salt impregnation and a thermo-oxidative stabilization step. To gain further insight into the carbonization process and microstructural transformation, the morphologies, crystallinities, elemental compositions, and thermal stabilities of the fibers were characterized at various stages of processing. The stabilization step resulted in a significant increase in carbon yield, indicating a dramatic increase in thermal stability. This is due to the crosslinking of polyamide-6 chains, which was confirmed by functional group analysis. The crystallinity of the fibers was also significantly altered during processing, as the produced carbon fibers consisted of pseudo-amorphous carbon with two distinct regions of metal salt impregnation. Finally, the findings and microstructural evolution mechanisms provide guidelines for further research into carbon fiber produced from polyamide-6.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Universal Approach for the Depolymerization of Polyamides via Photothermal Conversion

Polyamides (PAs) exhibit excellent chemical stability and mechanical resistance, yet these same characteristics lead to their widespread accumulation in the environment as pollution. In this work, we developed an inclusive and operationally simple photothermal strategy to recycle PAs, overcoming the high energy barriers necessary to break down these materials. PAs can be depolymerized using photothermally mediated ring-closing depolymerization and acidic hydrolysis to afford cyclic and linear monomers using carbon black as a photothermal agent (PTA) under visible light irradiation. We showed that polyamide 6 is efficiently depolymerized to ε-caprolactam with 74% yield in 10 min. Similarly, in 1 h, the photothermal acidic hydrolysis of polyamide 6,6 afforded hexamethylene diamine and adipic acid with 97 and 96% yields, respectively. This method was further applied to a variety of aliphatic and aromatic PAs and mixed PA waste. Both photothermally promoted processes effectively depolymerize pigment-containing postconsumer waste by leveraging existing black pigments as PTAs. Here, photothermal conversion provided a general and rapid route for PA depolymerization under visible light irradiation, enabling high monomer yields with inexpensive reagents and a general tolerance to additives, demonstrating this approach’s potential for a circular plastic economy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Characterization of Polyamide Thin Films by Atomic Force Microscopy

This study directly compares the mechanical behavior of novel molecular layer deposition (MLD) and analogous interfacial polymerization (IP) polyamide thin films in environments relevant to reverse osmosis (RO) membrane operation. The elastic modulus of the films was determined using atomic force microscopy (AFM) in dry, hydrated, and chlorinated states. Surface roughness characteristics were also obtained given their potential influence on AFM modulus measurements. The much smoother MLD films demonstrated a statistically higher modulus in all states as compared to their IP counterparts. The MLD films maintained a modulus ~3X and ~5X greater than that of IP films after hydration and chlorination, respectively. Such differences in behavior may be due to the higher density and correspondingly lower void content of the MLD films. Results from this study provide a rationale for future development of MLD for fabrication of polyamide films for incorporation in RO membranes.

atomic force microscopy↗
DOE OSTI2022

Bioenabled Platform to Access Polyamides with Built-In Target Properties

The diversification of platform chemicals is key to today’s petroleum industry. Likewise, the flourishing of tomorrow’s biorefineries will rely on molecules with next-generation properties from biomass. Herein, we explore this opportunity with a novel approach to monomers with custom property enhancements. Cyclic diacids with alkyl and aromatic decorations were synthesized from muconic acid by Diels-Alder cycloaddition and copolymerized with hexamethylenediamine and adipic acid to yield polyamides with built-in hydrophobicity and flame retardancy. Testing shows a 70% reduction in water uptake and doubling of char production while largely retaining other key properties of the parent Nylon-6,6. In conclusion, the present approach can be generalized to access a wide range of performance-advantaged polyamides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Scalable Layer-by-Layer Electrospray-Assisted Interfacial Polymerization: Enabling Large-Area Polyamide Membrane Fabrication

Layer-by-layer electrospray-assisted interfacial polymerization (LBL-EAIP) has recently been proposed as an alternative approach for fabricating polyamide membranes with precisely controlled thickness and polymerization degree, showing great potential for reverse osmosis (RO) membrane synthesis. In this article, we report a scale-up strategy for LBL-EAIP to enable its practical application in RO membrane manufacturing. A multi-jet electrospray apparatus was developed, and the device configuration and process parameters were carefully adjusted to produce polyamide-on-polyethersulfone thin film composite (TFC) membranes with consistently high salt rejection and water permeance across the membrane area. Specifically, an average 97.1% NaCl rejection from a 2000 ppm NaCl feed was achieved with an area-to-area deviation of 1%, along with a deionized water permeance of 0.90 ± 0.11 LMH/bar at 15 bar feed pressure. In addition, a Fourier-transform infrared spectroscopy (FTIR)-based analytical method was developed for semi-quantitative assessment of membrane thickness and compositional uniformity, enabling rapid mapping of film microstructure and chemical variations. This work provides a pathway to scale up LBL-EAIP technology, bridging the gap between laboratory-scale innovation and industrial-scale manufacturing.

Feng, Yue (ORCID:0000000221343980)↗
DOE OSTI2025

Mixed polyamide and polyester upcycling via chemical autoxidation and engineered Pseudomonas putida

Polyamides, such as nylons, are often used in multi-component materials, like textiles and packaging, and are accompanied with unique recycling challenges. Recently, autoxidation and bioconversion has emerged as a tandem approach for the conversion of mixed plastics waste to single products, however the fate of polyamides in these processes is unknown. Here, we optimized the autoxidation of nylon-6 and nylon-6,6 depolymerization, achieving >92 mol% nitrogen recovery from both substrates, predominantly as acetamide, and 20–27 mol% carbon recovery (not including acetamide). Experiments with 13 C-labeled acetic acid demonstrated that the carbon in acetamide was solvent derived. Autoxidation of mixed nylon-6 and poly(ethylene terephthalate) (PET) post-consumer fibers resulted in similar carbon and nitrogen recoveries from nylon, while PET was depolymerized to terephthalic acid (TPA) at >65 C-mol% recovery. Next, we engineered Pseudomonas putida KT2440 to utilize acetamide as the sole carbon and nitrogen source for growth through the constitutive expression of genes encoding amidase enzymes, including a native amidase (PP_0613) shown to be active on C 2 –C 4 amides. Heterologous chromosomal expression of amiE, encoding the amidase from P. aeruginosa, was found to be superior to PP_0613 constitutive expression in genome integrated strains. Prior engineering to enable TPA conversion to β-ketoadipate pathway intermediate protocatechuate was leveraged and combined with deletion of pcaD to produce muconolactone as a product. Finally, a stacked strain engineered for conversion of acetamide, TPA, and DCAs was evaluated on the reaction product from autoxidation of mixed post-consumer nylon and PET fibers without any supplemental nitrogen, achieving quantitative yields in the presence of supplemental carbon.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Biobased chemical recycling: aminolysis of PET using renewable reagents and monomers to synthesize new semi-aromatic polyamides

Chemical recycling of PET is a method of depolymerizing polymer chains to monomeric components enabling the synthesis of second-generation materials with virgin-like quality. Commercial chemical recycling techniques rely upon high pressure methanolysis to create precursors capable of synthesizing a second-generation PET resin. However, despite the circular approach of methanolysis, a product with a very short lifespan and similar value is created. The approach of the current study is to utilize aminolysis as an ambient pressure technique to create precursors for higher value materials with longer lifespans to address the current crisis in plastic waste. Semi-aromatic polyamides (SAP) are desired in this circumstance because of their high melting point and heat resistance combined with good melt-processability similar to aliphatic polyamides. In this study SAPs were synthesized using precursors recovered from the aminolysis of PET employing biobased diamines and dicarboxylic acids. While aminolysis has been explored in previous studies, this work investigated the use of biobased components from castor oil: decamethylene diamine during recycling and sebacic acid during polymerization. Polymer synthesis resulted in the formation of SAPs similar to polyphthalamides (PPA) with novel structures given the aromatic portion from terephthalic acid (TPA) and aliphatic portion from the diamines and diacids. The synthesized materials exhibited excellent thermal stability with high glass transition temperatures. Novel polymers were created with varying aliphatic chain length to understand fundamental parameters needed to produce a valuable polymer from post-consumer waste.

High performance Applications↗
DOE OSTI2022

Calcium Sulfate and Calcium Carbonate Scaling of Thin-Film Composite Polyamide Reverse Osmosis Membranes with Surface-Tethered Polyacrylic Acid Chains

The gypsum and calcite scaling propensities of the thin-film composite polyamide (PA-TFC) reverse osmosis (RO) membrane, modified with a tethered surface layer of polyacrylic acid (PAA) chains, was evaluated and compared to the scaling of selected commercial RO membranes. The tethered PAA layer was synthesized onto a commercial polyamide membrane (i.e., base-PA) via atmospheric pressure plasma-induced graft polymerization (APPIGP). The PAA nano-structured (SNS) base-PA membrane (SNS-PAA-PA) was scaled to a lesser degree, as quantified by a lower permeate flux decline and surface imaging, relative to the tested commercial membranes (Dow SW30, Toray SWRO, and BWRO). The cleaning of gypsum-scaled membranes with D.I. water flushing achieved 100% water permeability recovery for both the SNS-PAA-PA and Dow SW30 membranes, relative to 92–98% permeability restoration for the Toray membranes. The calcium carbonate scaling of SNS-PAA-PA membranes was also lower relative to the commercial membranes, but permeability recovery after D.I. water cleaning was somewhat lower (94%) but consistent with the level of surface scale coverage. In contrast, the calcite and gypsum-scaled membrane areas of the commercial membranes post-cleaning were significantly higher than for the SNS-PAA-PA membrane but with 100% permeability recovery, suggesting the potential for membrane damage when mineral scaling is severe.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Fouling behavior of zwitterionic membranes compared to polyamide membranes

Membrane fouling remains a critical bottleneck for reverse osmosis (RO) desalination, driving energy consumption and reducing membrane lifetime. Here, we employ all-atom molecular dynamics simulations to investigate the antifouling behavior of random zwitterionic amphiphilic copolymer (r-ZAC) membranes composed of sulfobetaine methacrylate (SBMA) and allyl methacrylate (AMA), benchmarked against conventional polyamide (PA) RO membranes. Structural and dynamical analyses—including radial distribution functions, coordination numbers, tetrahedral order parameters, vector orientation, and residence-time correlation functions—reveal that r-ZAC surfaces sustain tightly bound, long-lived hydration layers with preserved tetrahedrality and anisotropic water orientation, in sharp contrast to the weak and disordered hydration of PA. Steered molecular dynamics simulations demonstrate that r-ZAC membranes impose substantial free-energy barriers to foulant approach (alginate ≈ 90 kcal/mol, sucrose ≈ 35 kcal/mol, humic acid ≈ 15 kcal/mol), whereas PA membranes exhibit negligible barriers (< 1 kcal/mol) and thermodynamically favorable adsorption. Detailed foulant–surface interaction analyses show that zwitterionic hydration and electrostatic heterogeneity in r-ZAC suppress adhesion, except in the case of amphiphilic humic acid, which exploits multiple binding modes. Together, these results establish molecular-level design principles for antifouling membranes: the combination of zwitterionic hydration, structured interfacial water, and controlled amphiphilic balance in r-ZAC membranes provides superior resistance to organic fouling relative to PA.

Cross-linked polyamide↗
DOE OSTI2025

Hydrolysis of Polyamide 6 to ε‐Caprolactam over Titanium Dioxide

Polyamides (PAs) are an important component of discarded textiles and food packaging. Chemical recycling can recover PA monomers, enabling repolymerization to produce virgin-grade PA. However, contemporary PA chemical recycling methods employ homogeneous catalysts that are hard to separate. Anatase TiO 2 is reported as a catalyst for PA6 hydrolysis at 270 °C for 0.5 h, achieving a maximum ε-caprolactam (CL) yield of 81% (limited by thermodynamic equilibrium). The CL yield decreases upon catalyst reuse, due to loss of catalyst surface area induced by significant changes in catalyst crystallinity and texture. Pretreating the catalyst hydrothermally stabilizes it against morphological changes, yielding repeatable CL yields. Altogether, this study discloses a heterogeneous catalyst capable of producing repeatable equilibrium CL yields via PA6 hydrolysis under industrially relevant reaction temperatures and times (<3 h, 250–330 °C).

depolymerization↗
DOE OSTI2023

Mechanical behavior of polyamide-6 after combined photo-oxidative and hygrothermal aging

The effect of moisture on the photo-oxidative degradation of polyamide-6 (PA-6) was studied by analyzing the mechanical response after two different accelerated aging procedures. In the first aging procedure, the PA-6 was only exposed to ultra-violet (UV) radiation at 60 °C. In the second procedure, the same duration of UV radiation was periodically interrupted while the relative humidity was raised to 100%. Diffusion-limited and nominally homogeneous degradation conditions were investigated using bulk and film specimens, respectively. Accelerated UV aging reduced the ductility of PA-6, but the additional hygrothermal exposure had no effect on the ductility or strength, indicating that humidity did not influence the photo-oxidation of PA-6. In conclusion, this finding contrasts with previous studies that found thermo-oxidation of PA-6 was accelerated by moisture.

36 MATERIALS SCIENCE↗
DOE OSTI2024

The effect of stretching on polyamide – 6: assessment of crystallinity, mechanical properties, and surface roughness

Polyamide-6 (PA6), or nylon-6, is a widely used low-cost polymer material for various applications. Manufacturing PA6 into fibers involves a spinning process such as melt extrusion, which orients the polymer chains into a semicrystalline structure. When stretching the produced fibers to high strains, the PA6 fibers transition the metastable gamma phase back into the stable gamma phase. The effects of these large stretches on mechanical properties have not been explored after the stretch has been released. In this study, the effects on mechanical properties were studied by stretching the PA6 fibers from 10% to 50% tensile strain and subsequently releasing the fibers. The stretched fibers were characterized by X-ray diffraction and atomic force microscopy to determine the changes to the crystal structure and surface roughness. The stretched fibers were then tensile tested to failure and the tensile properties were examined. The stress-strain curves on the post-stretched PA6 fibers showed clear softening in the fibers with lower initial moduli after 30% stretching. Furthermore, these results may hold a clue to softening of fibers in applications with repeated loading and have implications for mechanical stability and fatigue of this polymeric material.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Effect of different manufacturing methods on polyamide reverse-osmosis membranes for desalination: Insights from molecular dynamics simulations

Membranes are a key technology platform for a broad application of energy-efficient separations. To best serve the separation demands of industry, the manufacturing processes for these membranes are garnering increasing attention. In particular, for water desalination, the industry leading polyamide (PA) reverse osmosis (RO) membranes can be manufactured via molecular layer-by-layer (mLBL) deposition, interfacial polymerization (IP), and 3D-printing technique. However, the influence of different manufacturing methods on PA membrane’s properties is far from understood. Here, in this study, we present the high-pressure transport behavior of water and salt ions for PA membranes formed with IP, mLBL, and 3D-printing through non-equilibrium molecular dynamics simulations. Studies show that membranes fabricated with 3D-printing have similar performances to those manufactured using mLBL, quantified by water permeability, rejection of salt ions, structural integrity, and porosity features. However, the membranes formed with IP exhibit faster water transport, lower rejection, worse structural integrity, and more inhomogeneous network pores than those constructed using mLBL and 3D-printing. The unconnected water-accessible space governs water transport for PA membranes formed with mLBL and 3D-printing, which offers the impermanent open-closed pores that enable water to jump through PA membranes. In contrast, the permeated water-enterable space plays a prominent role in water movement across the PA membrane formed with IP, providing a continuous transport channel at high pressure. Importantly, we observe the more significant compaction features at high pressure for PA membranes formed with IP than mLBL and 3D printing. In short, these findings provide a comprehensive understanding of existing membrane preparation technologies. It also provides a guide for developing the new membrane preparation process at the molecular level.

3D-printing↗
DOE OSTI2022

Scaling electrospray based additive manufacturing of polyamide membranes

Additive manufacturing based on electrospray printing has been demonstrated to fabricate polyamide membranes with separation properties similar to commercial membranes while also offering exceptional control of membrane thickness and roughness. In this work, we report on the scalability of the electrospray process to produce membrane leaves that are 10 times the area of membranes fabricated in literature through electrospray printing. The large membrane leaves exhibited salt rejection of >90% (at 2000 ppm feed salt concentration) and ∼0.7 LMH/bar flux, which is comparable to smaller printed membranes using the same process.

Additive manufacturing↗