SEARCH · Engineering Papers
Results for “planetary boundary layer height”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Can Tracked Great Frigatebirds (Fregata minor) be Used to Measure the Dynamics of the Planetary Boundary Layer Height?
Observing the dynamics of the planetary boundary layer (PBL) will require creative combinations of space-based and in-situ measurements. Animals fitted with biologgers have been used to gather data and parameterize physical models in various settings and may be a useful addition to the suite of space-based measurements that NASA is considering. For example, great frigatebirds (Fregata minor) generally fly below 700m but have been shown to routinely climb up to 2,000 meters during the day, occasionally reaching heights over 4,000 meters. This suggests that they may be tracking boundary layer height dynamics as they soar and glide on air currents with little energetic cost. We show here that the high-altitude climbing heights of great frigatebirds carrying GPS/accelerometer biologgers (e-obs GmbH Bird Solar 15g) at Palmrya Atoll, Pacific Ocean, are consistent with the long-term climatology (2006-2019) of the local planetary boundary layer height, and that these soaring heights can be reliably extracted from the tag data. Additional study is needed to determine how well movement data from tracked birds can constrain PBL height, but this work demonstrates the potential for animal-borne sensors to complement space-based measurements. Biologging data were contributed by the USGS and the Nature Conservancy's Palmyra Bluewater Research (PBR) study and analyzed as part of NASA’s Internet of Animals project.
Assimilation of Lidar Planetary Boundary Layer Height Observations
Lidar backscatter and wind retrievals of the planetary boundary layer height (PBLH) are assimilated into 22 hourly forecasts from the NASA Unified - Weather and Research Forecast (NU-WRF) model during the Plains Elevated Convection Convection at Night (PECAN) campaign on July 11, 2015 in Greensburg, Kansas, using error statistics collected from the model profiles to compute the necessary covariance matrices. Two separate forecast runs using different PBL physics schemes were employed, and comparisons with 6 independent radiosonde profiles were made for each run. Both of the forecast runs accurately predicted the PBLH and the state variable profiles within the planetary boundary layer during the early morning, and the assimilation had a small impact during this time. In the late afternoon, the forecast runs showed decreased accuracy as the convective boundary layer developed. However, assimilation of the Doppler lidar PBLH observations were found to improve the temperature and V velocity profiles relative to independent radiosonde profiles. Water vapor was overcorrected, leading to increased differences with independent data. Errors in the U velocity were made slightly larger. The computed forecast error covariances between the PBLH and state variables were found to rise in the late afternoon, leading to the larger improvements in the afternoon. This work represents the first effort to assimilate PBLH into forecast states using ensemble methods.
A New Method to Retrieve the Diurnal Variability of Planetary Boundary Layer Height from Lidar Under Different Thermodynamic Stability Conditions
The planetary boundary layer height (PBLH) is an important parameter for understanding the accumulation of pollutants and the dynamics of the lower atmosphere. Lidar has been used for tracking the evolution of PBLH by using aerosol backscatter as a tracer, assuming aerosol is generally well-mixed in the PBL; however, the validity of this assumption actually varies with atmospheric stability. This is demonstrated here for stable boundary layers (SBL), neutral boundary layers (NBL), and convective boundary layers (CBL) using an 8-year dataset of micropulse lidar (MPL) and radiosonde (RS) measurements at the ARM Southern Great Plains, and MPL at the GSFC site. Due to weak thermal convection and complex aerosol stratification, traditional gradient and wavelet methods can have difficulty capturing the diurnal PBLH variations in the morning and forenoon, as well as under stable conditions generally. A new method is developed that combines lidar-measured aerosol backscatter with a stability dependent model of PBLH temporal variation (DTDS). The latter helps “recalibrate” the PBLH in the presence of a residual aerosol layer that does not change in harmony with PBL diurnal variation. The hybrid method offers significantly improved PBLH detection, with better correlation and smaller biases, under most thermodynamic conditions, especially for SBL and CBL. Relying on the physical process of PBL diurnal development, different schemes are developed for growing, maintenance, and decaying periods. Comprehensive evaluation of this new method shows much better tracking of diurnal PBLH variation and significantly smaller biases under various pollution levels.
Annual Cycle of Planetary Boundary Layer Heights estimated from NOAA Profiler Network Data
The Planetary Boundary Layer (PBL) height over the Unites States Great and Central Plains during 1992-2012 is examined here using a combination of Wind Profiler-derived (WP) PBL height estimates and reanalysis fields from the Modern Era Retrospective Reanalysis Version 2 (MERRA-2). The combined analysis allows process study of the reasons behind the monthly mean behavior of the observed PBL heights under clear-sky conditions as well as the PBL height variability. WP PBL height monthly mean annual cycles were grouped into general categories of behavior, each analyzed using MERRA-2 fields of sensible and latent heat flux, surface temperature, net radiation and soil moisture. In the ’canonical’ category the latent heat plays little role in the determination of the monthly mean PBL height, and it follows the annual cycle of the net radiation. In the other categories, precipitation and latent heat flux had more influence in setting the annual cycle. An analysis of variance revealed that the role of latent heat in determining the PBL height variations is large (explaining up to 40% of PBL height variability) even in the ’canonical’ category for which latent heat played no role in setting the monthly mean. In other categories the latent heat explained up to 80% of the PBL height variations. The amount of that influence is shown to be related to the variability of column soil moisture.
Determining Planetary Boundary Layer Height by Micro-pulse Lidar with Validation by UAV Measurements
Planetary boundary layer height (PBLH) is often used to characterize the structure of the lower atmosphere. Aerosol lidar, a ground-based remote sensing method, provides the vertical distribution of aerosol at a high temporal resolution observation data, from which, the PBL structure and the position of the PBL top can be comprehensively studied. PBLH determination with lidar data depends primarily on the characteristic turbulent motions in the atmosphere and the geophysical location. However, lidar determination of PBLH over densely populated subtropical locations has rarely been discussed; thus, developing retrieval techniques suitable to these areas is necessary. In this study, four PBLH determination methods (Gradient, δ–threshold, Haar wavelet transform, and hybrid image processing) are applied to estimate the PBLH from lidar observations over an urban area in East Asia, and one—the Gradient method—relied on potential temperature measurements from an unmanned aerial vehicle (UAV) flights to validate our results. Our results indicate that a combination of the gradient method and δ-threshold method can provide better results, in terms of diurnal pattern, than using either method individually. Furthermore, the Haar wavelet and the Hybrid image processing can detect the PBL development comparably well, but both methods are dependent on their initial conditions and optimized algorithm settings. In addition, the accompanying UAV observations are conclusively shown to have a high degree of efficacy for validating the lidar data. This research highlights that a combination of PBLH determination methods can better describe the PBLH evolution throughout a day in some cases, while in others less common determination methods are proving useful, and a suite of retrieval methods should still be explored for precisely mapping the PBL in densely populated subtropical areas.
Best estimate of the planetary boundary layer height from multiple remote sensing measurements
Remote sensing measurements have been widely used to estimate the planetary boundary layer height (PBLHT). Each remote sensing approach offers unique strengths and faces different limitations. In this study, we use machine learning (ML) methods to produce a best-estimate PBLHT (PBLHT-BE-ML) by integrating four PBLHT estimates derived from remote sensing measurements at the Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) observatory. Three ML models – random forest (RF) classifier, RF regressor, and light gradient-boosting machine (LightGBM) – were trained on a dataset from 2017 to 2023 that included radiosonde, various remote sensing PBLHT estimates, and atmospheric meteorological conditions. Evaluations indicated that PBLHT-BE-ML from all three models improved alignment with the PBLHT derived from radiosonde data (PBLHT-SONDE), with LightGBM demonstrating the highest accuracy under both stable and unstable boundary layer conditions. Feature analysis revealed that the most influential input features at the SGP site were the PBLHT estimates derived from (a) potential temperature profiles retrieved using Raman lidar (RL) and atmospheric emitted radiance interferometer (AERI) measurements (PBLHT-THERMO), (b) vertical velocity variance profiles from Doppler lidar (PBLHT-DL), and (c) aerosol backscatter profiles from micropulse lidar (PBLHT-MPL). The trained models were then used to predict PBLHT-BE-ML at a temporal resolution of 10 min, effectively capturing the diurnal evolution of PBLHT and its significant seasonal variations, with the largest diurnal variation observed over summer at the SGP site. We applied these trained models to data from the ARM Eastern Pacific Cloud Aerosol Precipitation Experiment (EPCAPE) field campaign (EPC), where the PBLHT-BE-ML, particularly with the LightGBM model, demonstrated improved accuracy against PBLHT-SONDE. Analyses of model performance at both the SGP and EPC sites suggest that expanding the training dataset to include various surface types, such as ocean and ice-covered areas, could further enhance ML model performance for PBLHT estimation across varied geographic regions.
Estimating Planetary Boundary Layer Heights from NOAA Profiler Network Wind Profiler Data
An algorithm was developed to estimate planetary boundary layer (PBL) heights from hourly archived wind profiler data from the NOAA Profiler Network (NPN) sites located throughout the central United States. Unlike previous studies, the present algorithm has been applied to a long record of publicly available wind profiler signal backscatter data. Under clear conditions, summertime averaged hourly time series of PBL heights compare well with Richardson-number based estimates at the few NPN stations with hourly temperature measurements. Comparisons with clear sky reanalysis based estimates show that the wind profiler PBL heights are lower by approximately 250-500 m. The geographical distribution of daily maximum PBL heights corresponds well with the expected distribution based on patterns of surface temperature and soil moisture. Wind profiler PBL heights were also estimated under mostly cloudy conditions, and are generally higher than both the Richardson number based and reanalysis PBL heights, resulting in a smaller clear-cloudy condition difference. The algorithm presented here was shown to provide a reliable summertime climatology of daytime hourly PBL heights throughout the central United States.
Operational wind plants increase planetary boundary layer height: an observational study
As wind energy deployment grows, interactions between wind plants and the surrounding environment become more prevalent. The current investigation seeks to understand these interactions by characterizing the impact of wind plants on the planetary boundary layer height (PBLH), utilizing observations from the American WAKE experimeNt (AWAKEN) campaign. Given the ambiguity of the definition of PBLH under stable atmospheric conditions, where the impact of wind plants is expected to be strongest, a comparison of different methods for identifying PBLH is first conducted using data collected by multiple types of instruments. The Heffter method is selected as the thermodynamic method because it generates the most consistent results for the radiosonde and infrared spectrometer. A minimum vertical velocity variance method is used for a turbulence-based definition. Using both of these methods, the values of PBLH measured at spatially distributed sites are compared under a range of atmospheric conditions. Both methods show a clear increase in PBLH downstream of a wind plant for stable conditions. These impacts are strongest when the upstream PBLH is shallow (less than 0.25 km), with the thermodynamic method showing a PBLH increase of 35 %–39 % and the turbulence-based method showing a 143 % increase. At a site 20 km downstream of the wind plant, these effects are no longer observed, suggesting PBLH is not influenced by the wind plant at this distance. The results of this investigation show that wind plants can modify PBLH in their vicinity. As PBLH is a key parameter for numerical models, this insight into wind plant–atmosphere interactions can be used to validate and improve the accuracy of wind energy forecasts.
Relationships Between the Planetary Boundary Layer Height and Surface Pollutants Derived from Lidar Observations over China: Regional Pattern and Influencing Factors
The frequent occurrence of severe air pollution episodes in China has been a great concern and thus the focus of intensive studies. Planetary boundary layer height (PBLH) is a key factor in the vertical mixing and dilution of near-surface pollutants. However, the relationship between PBLH and surface pollutants, especially particulate matter (PM) concentration across China, is not yet well understood. We investigate this issue at 1600 surface stations using PBLH derived from space-borne and ground-based lidar, and discuss the influence of topography and meteorological variables on the PBLH–PM relationship. Albeit the PBLH–PM correlations are roughly negative for most cases, their magnitude, significance, and even sign vary considerably with location, season, and meteorological conditions. Weak or even uncorrelated PBLH–PM relationships are found over clean regions (e.g., Pearl River Delta), whereas nonlinearly negative responses of PM to PBLH evolution are found over polluted regions (e.g., North China Plain). Relatively strong PBLH–PM interactions are found when the PBLH is shallow and PM concentration is high, which typically corresponds to wintertime cases. Correlations are much weaker over the highlands than the plains regions, which may be associated with lighter pollution loading at higher elevations and contributions from mountain breezes. The influence of horizontal transport on surface PM is considered as well, manifested as a negative correlation between surface PM and wind speed over the whole nation. Strong wind with clean upwind air plays a dominant role in removing pollutants, and leads to obscure PBLH–PM relationships. A ventilation rate is used to jointly consider horizontal and vertical dispersion, which has the largest impact on surface pollutant accumulation over the North China Plain. As such, this study contributes to improved understanding of aerosol–planetary boundary layer (PBL) interactions and thus our ability to forecast surface air pollution.
Analysis of the Planetary Boundary Layer Height During DISCOVER-AQ Baltimore–Washington, D.C., with Lidar and High-Resolution WRF Modeling
The daytime planetary boundary layer (PBL) was examined for the Deriving Information on Surface Conditions from Column and Vertically Resolved Observations Relevant to Air Quality (DISCOVER-AQ) Baltimore (Maryland)–Washington, D.C., campaign of July 2011 using PBL height (PBLH) retrievals from aerosol backscatter measurements from ground-based micropulse lidar (MPL), the NASA Langley Research Center airborne High Spectral Resolution Lidar-1 (HSRL-1), and the Cloud–Aerosol Lidar with Orthogonal Polarization (CALIOP) on the Cloud–Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) satellite. High-resolution Weather Research and Forecasting (WRF) Model simulations with horizontal grid spacing of 1 km and different combinations of PBL schemes, urban parameterization, and sea surface temperature inputs were evaluated against PBLHs derived from lidars, ozonesondes, and radiosondes. MPL and WRF PBLHs depicted a growing PBL in the morning that reached a peak height by midafternoon. WRF PBLHs calculated from gridded output profiles generally showed more rapid growth and higher peak heights than did the MPLs, and all WRF–lidar differences were dependent on model configuration, PBLH calculation method, and synoptic conditions. At inland locations, WRF simulated an earlier descent of the PBL top in the afternoon relative to the MPL retrievals and radiosonde PBLHs. At Edgewood, Maryland, the influence of the Chesapeake Bay breeze on the PBLH was captured by both the ozonesonde and WRF data but generally not by the MPL PBLH retrievals because of generally weaker gradients in the aerosol backscatter profile and limited normalized relative backscatter data near the top height of the marine layer.
Planetary Boundary Layer Height from AIRS and MERRA-2 Products at NASA GES DISC, and Insights from Data Intercomparison
The Atmospheric Infrared Sounder (AIRS) is the hyperspectral infrared sounder onboard NASA's Aqua satellite, launched in 2002. The NASA Goddard Earth Sciences Data and Information Services Center (GES DISC), in collaboration with NASA Sounder Team at JPL, provides processing, archiving, and distribution services for NASA sounders: the Aqua AIRS mission and the subsequent Suomi-National Polar-orbiting Partnership Cross-track Infrared Sounder (CrIS) mission. The Planetary Boundary Layer (PBL) Height is a new variable added in the AIRS Version 6 support product. It is derived based on gradients of the retrieved atmospheric thermodynamic profile, and gives the pressure at the top of PBL over the ocean. The GES DISC also provides services for the second Modern-Era Retrospective analysis for Research and Applications (MERRA-2) product generated by the Goddard Earth Observing System Model, Version 5 (GEOS-5) data assimilation system. The monthly PBL Height variable has been available in the Giovanni system, which is a Web-based application developed by the GES DISC providing a simple and intuitive way to visualize, analyze, and access vast amounts of Earth science remote sensing data. In this work, we will present the monthly PBL Height data from AIRS and MERRA-2 and the services to support data intercomparison, such as access, plotting, subsetting, re-gridding, and generation of a multi-year monthly mean. We will also show intercomparison results, and evaluate whether (over the ocean) AIRS can observe PBL features similar to the reanalysis product at monthly and longer-term scales.
Planetary Boundary Layer Height Estimates From ICESat-2 and CATS Backscatter Measurements
The lowest layer of the atmosphere in which all human activity occurs is called the Planetary Boundary Layer (PBL). All physical interactions with the surface, such as heat and moisture transport, pollution dispersion and transport happen in this relatively shallow layer. The ability to understand and model the complex interactions that occur in the PBL is very important to air quality, weather prediction and climate modeling. A fundamental and physically important property of the PBL is its thickness or height. This work presents two methods to obtain global PBL height using satellite lidar data from the Ice, Cloud and land Elevation Satellite-2 (ICESat-2) and the Cloud-Aerosol Transport System (CATS). The first method is a straightforward backscatter threshold technique and the second is a machine learning approach known as a Convolutional Neural Network. The PBL height retrievals from the two methods are compared with each other and with PBL height from the NASA GEOS MERRA-2 reanalysis. The lidar-retrieved PBL heights have a high degree of spatial correlation with the model heights but are generally higher over ocean (∼400 m) and over northern hemisphere high latitude regions (∼1,000 m). Over mid-latitude and tropical land areas, the satellite estimated PBL heights agree well with model mid-day estimates. This work demonstrates the feasibility of using satellite lidar backscatter measurements to obtain global PBL height estimates, as well as determining seasonal and regional variability of PBL height.
The Use of MERRA-2 Near Surface Meteorology to Understand the Behavior of Planetary Boundary Layer Heights Derived from Wind Profiler Data over the US Great Plains
The atmospheric general circulation model (GCM) that underlies the MERRA-2 reanalysis includes a suite of physical parameterizations that describe the processes that occur in the planetary boundary layer (PBL). The data assimilation system assures that the atmospheric state variables used as input to these parameterizations are constrained to the best fit to all of the available observations. Many studies, however, have shown that the GCM-based estimates of MERRA-2 PBL heights are biased high, and so are not reliable for application related to constituent transport or the carbon cycle. A new 20-year record of PBL heights was derived from Wind Profiler (WP) backscatter data measured at a wide network of stations throughout the US Great Plains and has been validated against independent estimates. The behavior of these PBL heights shows geographical and temporal variations that are difficult to attribute to particular physical processes without additional information that are not part of the observational record. In the present study, we use information on physical processes from MERRA-2 to understand the behavior of the WP derived PBL heights. The behavior of the annual cycle of both MERRA-2 and WP PBL heights shows three classes of behavior: (i) canonical, where the annual cycle follows the annual cycle of the sun, (ii) delayed, where the PBL height reaches its annual maximum after the annual maximum of the solar insolation, and (iii) double maxima, where the PBL height begins to rise with the solar insolation but falls sometimes during the summer and then rises again. Although the magnitude of these types of variations is described by the WP PBL record, the explanation for these behaviors and the relationship to local precipitation, temperature, hydrology and sensible and latent heat fluxes is articulated using information from MERRA-2.
The Use of MERRA-2 Near Surface Meteorology to Understand the Behavior of Planetary Boundary Layer Heights Derived from Wind Profiler Data over the US Great Plains
The atmospheric general circulation model (GCM) that underlies the MERRA-2 reanalysis includes a suite of physical parameterizations that describe the processes that occur in the planetary boundary layer (PBL). The data assimilation system assures that the atmospheric state variables used as input to these parameterizations are constrained to the best fit to all of the available observations. Many studies, however, have shown that the GCM-based estimates of MERRA-2 PBL heights are biased high, and so are not reliable for boundary layer studies.A 20-year record of PBL heights was derived from Wind Profiler (WP) backscatter data measured at a wide network of stations throughout the US Great Plains and has been validated against independent estimates. The behavior of these PBL heights shows geographical and temporal variations that are difficult to attribute to particular physical processes without additional information that are not part of the observational record.In the present study, we use information on physical processes from MERRA-2 to understand the behavior of the WP derived PBL heights. The behavior of the annual cycle of both MERRA-2 and WP PBL heights shows four classes of behavior: (i) canonical, characterized by a monthly progression in PBL height that follows the solar insolation, (ii) double peak, characterized by canonical behavior that is interrupted by a minimum in July, (iii) late peak, characterized by a suppressed heights in May and June, and return to canonical in July and August, and (iv) early peak where the PBL height rises with solar insolation but is suppressed later in the summer. The explanation for these behaviors and the relationship to local precipitation, temperature, sensible and latent heat fluxes, net radiation and aerosol load is articulated using information from MERRA-2.
Planetary Boundary Layer Height from AIRS, MERRA-2, and GPS Radio Occultation Data Products at NASA GES DISC, and Insights from Their Profiles Intercomparison
The NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) provides archive and distribution services for several data products in the Planetary Boundary Layer (PBL) category. As a new variable added to the Atmospheric Infrared Sounder (AIRS) Version 6 support product, the PBL height from AIRS is derived based on the gradients of the retrieved relative humidity profile, and provides the atmospheric pressure at the top of the PBL over the ocean. The GES DISC also hosts the Modern-Era Retrospective analysis for Research and Applications-2 (MERRA-2) product generated by the Goddard Earth Observing System Model Version 5 (GEOS-5) data assimilation system. The PBL height from MERRA-2 is based on the total eddy diffusion coefficient of heat. The monthly PBL height has been made available in the Giovanni system (Giovanni is a Web-based application developed by the GES DISC providing a simple and intuitive way to visualize, analyze, and access vast amounts of Earth science remote sensing data). Recently, the GES DISC began serving the global PBL height climatology product derived from the COSMIC/FORMOSAT-3 and TerraSAR-X Global Positioning System (GPS) radio occultation (RO) measurements from June 2006 to December 2015. In a previous study, we presented the monthly PBL height data from AIRS and MERRA-2 and demonstrated the GES DISC services which support data intercomparison, such as access, plotting, sub-setting, regridding, and generation of a multi-year monthly mean. We also provided intercomparison results, and found that different PBL height definitions contributed to significant differences of PBL height values between AIRS and MERRA-2. In this work, we present the 10-year seasonal climatologies from the AIRS, MERRA-2 and GPS-RO. We also used the cross section and vertical profile services in Giovanni to display and analyze the vertical atmosphere structure over regions where the PBL height derived from the AIRS and MERRA-2 are quite different. The examination of the AIRS and MERRA-2 three-dimensional data found that the relative humidity profiles had larger differences than the temperature profiles. The MERRA-2 gives more details than the AIRS for the vertical distribution of the humidity.
MPL Planetary Boundary Layer Heights at Golden, Fort Collins and Platteville
No abstract available
Airborne High Spectral Resolution Temperature Profiling for Retrievals of the Planetary Boundary Layer Height
Explore the source record for details and available documents.