SEARCH · Engineering Papers

Results for “photocatalytic HER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Enhancing the Multifunctional Photocatalytic Activity of Sustainable Magnetic Nanoparticles

The development of efficient photocatalytic materials has intensified in response to increasing emphasis on sustainable energy conversion and environmental restoration. However, the excessive use and indiscriminate release of heavy metals from photocatalytic nanoparticles pose potential environmental risks. This study provides insights into optimizing visible-light-active photocatalysts to enhance their photocatalytic properties and stability. Specifically, cobalt doping and controlled pH modulation are employed on the modified Fe 3 O 4 , forming two distinct samples: Co@Fe 3 O 4 -B (base-treated) and Co@Fe 3 O 4 -A (acid-treated) nanoparticles. Microscopic characterization reveals that Co@Fe 3 O 4 -A undergoes a phase transition to hematite, whereas Co@Fe 3 O 4 -B retains its mixed-phase configuration. Spectroscopic analyses confirm that the cobalt dopants decorate the outskirts of each nanoparticle, forming a core–shell structure. However, Co@Fe 3 O 4 -B exhibit Co 2+ states with a high oxygen vacancy content, whereas Co@Fe 3 O 4 -A contain mixed Co 2+/3+ states. The high density of defect states in the Co@Fe 3 O 4 -B results in superior photocatalytic efficiency, achieving near-complete oxidation of furfuraldehyde (97% conversion) and 5-hydroxymethylfurfural (94% conversion), as well as effective degradation of toluene (78% conversion). This study demonstrates that the combined approach of doping and pH treatment is promising for the surface-defect engineering of photocatalysts, enhancing their multifunctional performance and reusability for sustainable energy conversion.

Fe3 O4 nanoparticles↗

DOE OSTI2026

Visualization of the surface distribution of photocatalytic activity at the anatase/rutile TiO2 interface using X-ray photoelectron emission microscopy

We applied X-ray photoelectron emission microscopy (XPEEM) to visualize the surface distribution of photocatalytic activity at the anatase/rutile (A/R) interface of titanium dioxide. Acetic acid was adsorbed on the surface, and its decomposition and desorption reactions under ultraviolet light irradiation were monitored by observing C 1s spectra, enabling direct observation of the spatial distribution of photocatalytic activity. Complementary crystal structure information was obtained using spatially resolved low-energy electron diffraction, low-energy electron microscopy, X-ray absorption spectroscopy, and micro-focused Raman spectroscopy. Comparison with these structural data allowed for the evaluation of the photocatalytic activity as a function of the distance from the A/R interface. The activity is enhanced in the vicinity of the interface and gradually decreases toward both the anatase and rutile regions. These results demonstrate that XPEEM is an effective technique for spatially resolved mapping of photocatalytic activity, which has\\r\\npreviously been inaccessible using conventional characterization techniques.

25 ENERGY STORAGE↗

DOE OSTI2025

Morphology, Deformations, and Photocatalytic Activity of Thermally Treated Brookite Titanium Dioxide Thin Films

Metastable states, in which the coupling between long-range lattice deformations and electronic properties can be controlled, provide a pathway to tailoring the behavior of photocatalytic materials by directing the flow of photoinduced charge carriers. Brookite is a metastable polymorph of earth-abundant TiO 2 that exhibits photocatalytic function and, due to its high energy relative to the anatase and rutile polymorphs, may serve as a precursor for the formation of transitional metastable structures. In this work, facile thermal annealing is employed to promote the formation of predominantly brookite-phase films, regulate the brookite lattice distortions, and determine the effect of these distortions on charge separation, ultimately directed at enhancing photocatalytic activity. Profile fitting of X-ray diffraction patterns and peak shifts in Raman spectra revealed structural distortions of the brookite lattice. Structural defects, including lattice gliding, dislocations, stacking faults, and twin boundaries, were observed using scanning transmission electron microscopy. First-principles simulations reveal how the lattice distortions associated with stacking faults induce band bending, thus increasing the photocatalytic activity of brookite. In conclusion, this study provides insight into the microstructural tuning of metastable phases to enhance their unique functionalities.

band bending↗

DOE OSTI2025

Photocatalytic Semiconductor–Metal Hybrid Nanoparticles: Single-Atom Catalyst Regime Surpasses Metal Tips

Semiconductor–metal hybrid nanoparticles (HNPs) are promising materials for photocatalytic applications, such as water splitting for green hydrogen generation. While most studies have focused on Cd containing HNPs, the realization of actual applications will require environmentally compatible systems. Using heavy-metal free ZnSe-Au HNPs as a model, we investigate the dependence of their functionality and efficiency on the cocatalyst metal domain characteristics ranging from the single-atom catalyst (SAC) regime to metal-tipped systems. The SAC regime was achieved via the deposition of individual atomic cocatalysts on the semiconductor nanocrystals in solution. Utilizing a combination of electron microscopy, X-ray absorption spectroscopy, and X-ray photoelectron spectroscopy, we established the presence of single Au atoms on the ZnSe nanorod surface. Upon increased Au concentration, this transitions to metal tip growth. Photocatalytic hydrogen generation measurements reveal a strong dependence on the cocatalyst loading with a sharp response maximum in the SAC regime. Ultrafast dynamics studies show similar electron decay kinetics for the pristine ZnSe nanorods and the ZnSe-Au HNPs in either SAC or tipped systems. This indicates that electron transfer is not the rate-limiting step for the photocatalytic process. Combined with the structural-chemical characterization, we conclude that the enhanced photocatalytic activity is due to the higher reactivity of the single-atom sites. This holistic view establishes the significance of SAC-HNPs, setting the stage for designing efficient and sustainable heavy-metal-free photocatalyst nanoparticles for numerous applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Preparation and Photocatalytic Hydrogen Production of TiO 2 /(AlMnCoNiZn) 3 O 4 Nanocomposites

Photocatalytic water splitting is a promising strategy for addressing the global energy crisis and environmental pollution. In this study, spinel-type high-entropy oxide (HEO) nanoparticles, (AlMnCoNiZn) 3 O 4 , were successfully synthesized via a solution combustion method. TiO 2 /(AlMnCoNiZn) 3 O 4 nanocomposites with varying molar ratios were subsequently fabricated through solid-state sintering, and their photocatalytic water-splitting performance was systematically investigated. The hydrogen production rate initially increased and then decreased with increasing TiO 2 content. The optimal nanocomposite achieved a hydrogen evolution rate of 1450 μmol·h −1 ·g −1 under simulated sunlight irradiation, which is 2.2 times higher than that of pure TiO 2 nanoparticles. In addition, the TiO 2 /(AlMnCoNiZn) 3 O 4 nanocomposites exhibited significantly improved photocorrosion resistance compared with TiO 2 nanoparticles. After 12 h irradiation under a 500-W high-pressure mercury lamp, the hydrogen production rates of the nanocomposites and pure TiO 2 retained 79.3% and 5.47% of their initial values, respectively. These results demonstrate the important role of (AlMnCoNiZn) 3 O 4 and other HEOs in enhancing the photocatalytic performance of nanoheterojunction catalysts. Lastly, this work broadens the potential applications of (AlMnCoNiZn) 3 O 4 and related HEO materials in the field of photocatalysis.

Heterojunction↗

DOE OSTI2024

Regulation of Electron Cloud Density by Electronic Effects of Substituents to Optimize Photocatalytic H 2 Evolution of Carbon Dots

Carbon dots (CDs) have a wide light absorption range, which are promising candidates for photocatalytic water splitting H 2 evolution, but they show low activity for hydrogen evolution reaction (HER) due to the slow transfer efficiencies of photogenerated carriers. The electron cloud density of photocatalyst is essential for the separation and migration of photogenerated carriers. In this study, the effect mechanism of electron cloud density regulated by the substituents with different electronic effects on the photocatalytic HER of glucose-based CDs is clarified. CDs-SO 3 H and CDs-OH are first obtained by introducing electron-drawing group (–SO 3 H) and electron-donating group (–OH) using a tailoring post-processing strategy. Experimental results show that the H 2 yield catalyzed by CDs-SO 3 H is 89.95 µmol•g –1 in 4 h, which is about four times that of CDs, and 7.4 times that of CDs-OH. The –SO 3 H induces a much negative energy band and high electron cloud density on CDs edges, promoting the separation and transfer of photogenerated carriers; while the CDs-OH exhibits a high positive charge density and an upward energy band, hindering the surface complexation of electron-hole pairs and HER. Furthermore, this study will provide an insight into the design of CDs catalysts with efficient photocatalytic HER at a molecular level.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Levelized cost and carbon intensity of solar hydrogen production via water splitting using a scalable and intrinsically safe photocatalytic Z-scheme raceway system

Generating hydrogen from local energy resources such as solar or wind would unlock a low-carbon energy carrier that could be used to reduce greenhouse gas emissions in sectors such as industry and transportation. Yet, the allocation of new or existing power generation solely to hydrogen production remains contentious due to disputes regarding emissions accounting. Photocatalytic (PC) hydrogen production technologies offer a unique solution, as hydrogen is produced directly from solar energy and water, without the need for electricity generation. However, cost projections for all photocatalytic designs to date have suggested that they are not cost competitive compared to conventional electrolysis systems manufactured at scale. Herein, we offer the first illustrative benchmark of cost and carbon intensity of hydrogen produced in a type 2 “Z-scheme” photocatalytic reactor design, which employs suspended semiconducting nanoconductor particles organized into two stacked volumes in a raceway design. The “Z-scheme” system utilizes two separate photoabsorber particles, tuned to drive either the hydrogen evolution reaction or the oxygen evolution reaction individually, connected via a reversible, charge transfer redox couple in solution. Furthermore, the results suggest a highly competitive and scalable technology, that justifies further experimental validation and prototyping in the field.

Carbon↗

DOE OSTI2025

Fabrication of α-Fe 2 O 3 Nanoparticles/g-C 3 N 4 Direct Z-Scheme Heterojunction of Durable Photocatalytic Activity

The fabrication of a nanohybrid photocatalyst that combines α-Fe 2 O 3 nanoparticles with graphitic carbon nitride (g-C 3 N 4 ) is reported. The ensuing direct Z-scheme heterojunction greatly boosts the photocatalytic activity of the α-Fe 2 O 3 /g-C 3 N 4 nanohybrids. This results in organic dye degradation rates more than two times higher than its individual components, promoted by the efficient charge separation and transfer of the Z-scheme heterojunction mechanism of the nanohybrid photocatalyst. In addition, recyclability tests show an outstanding stability of the nanohybrids spanning five consecutive dye degradation experiments, during which the degradation rate is slightly improved. The origin of the improved photocatalytic performance of the nanohybrid lies in the intimate interaction between α-Fe 2 O 3 and g-C 3 N 4 afforded by the two-step fabrication process, which enables the direct and controlled growth of α-Fe 2 O 3 nanoparticles on g-C 3 N 4 . A first ultrasound impregnation step promotes the effective anchoring of stable Fe species via Fe–N and C–N/C–O bonding, while a second microwave phase conversion step induces the subsequent growth of α-Fe 2 O 3 nanoparticles on the g-C 3 N 4 sheets. Careful control of the FeCl 3 precursor concentration up to a threshold value of 0.25 M during impregnation enables complete control over their size and phase. This approach clearly highlights the benefits of microwave reactor systems in the fabrication of hematite-based Z-scheme photocatalytic, overcoming the limitations of conventional thermal treatment technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Pathways of Photocatalytic Oxidation of Formic Acid on Dry and Hydrated Anatase TiO 2 Surfaces

The photocatalytic oxidation of formic acid (FA), which is one of the most abundant volatile organic compounds, is a promising air remediation technology inspired by nature. However, the detailed mechanism of this photocatalytic reaction on the surface of TiO 2 , a typical photocatalyst, is not yet well-understood. In this work, we present a computational mechanistic study of the thermal vs photocatalytic oxidation of FA on dry and hydrated anatase TiO 2 (101) surfaces, based on periodic hybrid density functional theory (DFT) calculations, in which the photooxidation is treated as an excited-state process in a constrained triplet spin state. We first compare the adsorption modes of FA on the anatase (101) surface in the ground and excited states, followed by identification of the corresponding reaction intermediates that lead to the formation of CO 2 . We unveil the pivotal role of photogenerated holes localized at surface under-coordinated oxygen sites in mediating the C−H bond cleavage, thereby promoting CO 2 formation through a highly stable intermediate and an exergonic reaction step. Further investigation of the effect of coadsorbed water molecules shows that hydrogen bonding with water stabilizes FA in a monodentate configuration. This is favored over the unreactive bidentate structure that is the most stable under dry conditions, thus providing insight into the experimentally observed increase of the reaction rate in the presence of water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Advances in Colloidal InP-Based Quantum Dots for Photocatalytic Hydrogen Evolution

Photocatalytic materials for hydrogen generation are typically categorized into UV-absorbing metal oxides and visible-range semiconductors such as chalcogenides or perovskites, which often incorporate toxic elements. To address environmental concerns of the latter group, indium phosphide (InP)-based quantum dots (QDs) have recently emerged as a less toxic alternative. These nanocrystals (NCs) benefit from a broadband and tunable absorption spectrum, which is well matched for solar photochemistry, and offer suitable electronic characteristics to drive photoinduced charge separation. This perspective provides a comprehensive summary of the recent advancements in developing InP-based NCs with a focus on photocatalytic hydrogen production. We discuss synthetic strategies that enhance the catalytic activity of these materials and highlight key challenges that must be addressed to enhance their performance. Finally, we explore future research directions aimed at improving photocatalytic efficiency and integrating InP-based QDs into practical solar-to-fuel conversion systems.

Hydrogen↗

DOE OSTI2025

Photocatalytic Methanol Dehydrogenation with Switchable Selectivity

Switchable selectivity achieved by altering reaction conditions within the same photocatalytic system offers great advantages for sustainable chemical transformations and renewable energy conversion. In this study, we investigate an efficient photocatalytic methanol dehydrogenation with controlled selectivity by varying the concentration of nickel cocatalyst, using zinc indium sulfide nanocrystals as a semiconductor photocatalyst, which enables the production of either formaldehyde or ethylene glycol with high selectivity. Control experiments revealed that formaldehyde is initially generated and can either serve as a terminal product or intermediate in producing ethylene glycol, depending on the nickel concentration in the solution. Mechanistic studies suggest a unique role of ionic nickel as an additional photoelectron competitor that can significantly influence selectivity, alongside its well-established function as a hydrogen evolution reaction cocatalyst under photocatalytic conditions. The demonstrated switchable selectivity provides a new tool for producing diverse products from methanol, while advancing the understanding of cocatalyst behavior for versatile catalytic performance.

Luo, Jie↗

DOE OSTI2026

Synergistic CuWO 4 /NiS 2 Binary Nanostructures for Efficient Photocatalytic Hydrogen Production

A viable and ecologically safe method for producing green hydrogen is photocatalytic hydrogen (H 2 ) production. However, the development of effective semiconductor materials with improved activity and long-term stability is still a major obstacle. Here, in this work, we report the development of a broadband-gap, UV light-responsive CuWO 4 /NiS 2 nanocomposite using simple hydrothermal and wet impregnation techniques. The hybrid systems, with photocatalytic presentation, were thoroughly assessed using spectroscopic, photophysical, and microscopic characterization methods. The optimized CuWO 4 /NiS 2 nanostructure demonstrated an impressive H 2 generation rate of 28.2 mmol h –1 g –1 under light irradiation, which is roughly 2.71 and 3.28 times greater than those of pristine CuWO 4 (10.4) and NiS 2 (8.6 mmol h -1 g (cat) -1 ), respectively. The enhanced presentation is ascribed to the synergetic interface between the coupled semiconductors, which facilitates the formation of a nanostructure. This arrangement inhibits electron–hole recombination and encourages effective charge carrier parting. Additionally, compared with pristine CuWO 4 and NiS 2 , respectively, the CuWO 4 /NiS 2 composite showed a noticeably greater photocurrent density. The developed nanostructured CuWO 4 /NiS 2 displayed a 28.6% quantum efficiency at 450 nm. These outcomes validate CuWO 4 /NiS 2 ’s significant aptitude as a non-noble-metal photocatalyst for the production of sustainable hydrogen.

CuWO4/NiS2↗

DOE OSTI2026

TiO 2 Nanoparticles Enabling Photocatalytic Desulfurization for C–C Coupling Reaction Using Visible Light

We uncover a surface-mediated mechanism for visible-light-driven photocatalytic desulfurization of thiols on titanium dioxide (TiO 2 ) nanoparticles under LED illumination (>420 nm). Combined diffuse reflectance, infrared, and cryogenic electron paramagnetic resonance spectroscopy verify the formation of a surface thiol–Ti charge-transfer complex that introduces visible-light absorption into an otherwise UV-active reaction system. Selective photoexcitation of this surface complex drives interfacial charge transfer, directly activating the adsorbed thiol and inducing C–S bond scission without the band gap excitation of TiO 2 . The resulting carbon-centered radical intermediates are intercepted by styrene to form C–C coupling products. These results uncover a distinct surface-mediated photocatalytic mechanism in which charge-transfer complex formation governs both light absorption and chemical activation, providing a mechanistic framework for extending visible-light reactivity to wide-bandgap metal oxide photocatalysts.

addition of carbon radical to vinyl groups↗

DOE OSTI2025

Photocatalytic Activity and Stability of Carbon Nitride‐Pyrite Composites

Abstract In photocatalysis, the photoabsorber plays a crucial role in the reaction. The most important parameters are stability, cost and optical band gap. In this work, a prominent class of absorbers, namely carbon nitrides (CN), has been investigated. In the literature, CN is most often described as stable, although photodegradation has been observed. In order to retain the beneficial properties of CN while improving stability, a crystalline phase poly(triazine imide) (PTI) of carbon nitride was investigated and compared to polymeric CN in photocatalytic hydrogen generation experiments. In order to improve the charge separation for the photoinduced hydrogen evolution reaction, pyrite (FeS 2 ) was used as a surface co‐catalyst with a loading of 1, 5 and 10 wt %. At the same time, any photodegradation products in solution were investigated by ion chromatography. Interestingly, PTI shows hardly any photocorrosion compared to defective carbon nitride, indicating its higher photostability in hydrogen evolution experiments. However, FeS 2 produces ammonium as a degradation product when synthesised from nitrogen‐containing precursors. When made from nitrogen‐free precursors, FeS 2 together with photostable PTI releases little ammonia, making it a photostable, earth‐abundant composite for photocatalytic hydrogen generation.

Kaulbersch, Julian [University of Bayreuth 95440 B↗

DOE OSTI2026

Molecularly engineered ZnO–carbon nanosheets from fumaric acid precursors for efficient photocatalytic water purification

The photocatalytic breakdown of organic contaminants is crucial for the development of water purification technology. Zinc oxide (ZnO) is an extensively researched photocatalyst; however, its efficacy is hindered by rapid charge recombination and limited utilization of UV irradiation. Resolving these issues necessitates integrating ZnO with conductive carbon phases via scalable, low-temperature synthesis. We provide a molecularly designed sol–gel method that converts zinc–fumarate coordination networks into two-dimensional ZnO–carbon nanosheets utilizing solely aqueous precursors and mild annealing temperatures (400–600 °C). This method utilizes fumaric acid as a dicarboxylate linker and polyvinylpyrrolidone (PVP) as a structural carbon source to produce ultrathin wurtzite ZnO nanosheets embedded inside an amorphous carbon matrix. The resultant ZnO-C hybrid achieves nearly complete methylene blue degradation within 10 min under UV-A illumination, demonstrating first-order kinetics and outstanding recyclability. Compared with commercial ZnO, the ZnO–C nanosheets exhibit comparable rapid photocatalytic degradation, enhanced adsorption behavior, a porous nanosheet morphology, and an integrated ZnO–carbon interfacial structure. These findings provide a viable molecular-templating approach to fabricating various metal oxide–carbon photocatalysts and underscore substantial enhancements in semiconductor efficacy in eco-friendly water treatment systems.

Ozcan, Muca [ORNL] (ORCID:0000000320020474)↗

DOE OSTI2025

Maximizing sunlight absorption in narrow bandgap semiconducting copper(I) iodides for enhanced photocatalytic dye degradation

Photocatalytic dye degradation leverages sunlight to break down dyes and pigments into safer, simpler molecules. Using a material that can absorb a broad range of the solar spectrum optimizes the speed and efficiency of this process. In this study, we explore a series of new, narrow bandgap copper iodide semiconductors (1.5–1.7 eV) with various dimensionalities (0D to 3D) to evaluate their photocatalytic efficiency in dye degradation. The most effective material achieved 95% degradation within just 27 minutes. Mass spectrometry provided a detailed insight and in-depth understanding into the degradation mechanism. All materials demonstrated excellent stability under ambient conditions, highlighting their promise as eco-friendly candidates for dye degradation in water purification.

Carignan, Gia M. [Rutgers Univ., Piscataway, NJ (U↗

DOE OSTI2026

Robust photocatalytic hydrogen generation from CdSe nanoplatelets

Mercaptopropionic acid (MPA) capped-CdSe NPLs in-conjunction with a nickel-dihydrolipoic acid (Ni-DHLA) co-catalyst, yielded a robust output of photocatalytically generated hydrogen (H 2 ) at low concentrations of nanoplatelets. Furthermore, etching led to increased catalytic efficiency, suggesting that exposed catalytically active sites are primarily responsible for photocatalytic activity.

Phinney, Elizabeth O. [University of Rochester, NY↗

DOE OSTI2025

Reducing module soiling with scalable and robust photocatalytic coatings

The air-glass interface at the front of a photovoltaic (PV) module reflects approximately 4% of incident light, decreasing the potential power output of the module by the same amount. Today’s modules reduce this loss by adding a low-refractive-index (1.25-1.30) SiO2 coating to the sunward side of the module glass; this antireflection coating recovers approximately 3% of the 4% light that would otherwise be lost. While such antireflection coatings work very well on clean, new modules, they do not inhibit soiling—the accumulation of soilants such as dust, pollen, soot, or other foreign material—on the module glass, and soilants reflect and scatter incident light. An improved coating would serve provide not only an antireflection effect, but also an anti-soiling effect. The goal of this project was to develop such a coating and provide a path for it to be manufactured in the U.S. The project successfully designed and fabricated coatings that provided >3% transmittance gain compared to bare glass (matching the performance of commercial antireflection coatings) and displayed anti-soiling behavior in standard laboratory soiling effects. This was achieved by using a Swift Coat proprietary coating deposition technique, aerosol impact-driven assembly (AIDA), to control the porosity and thus refractive index of coatings of photocatalytic materials—such as TiO2—that would otherwise increase (instead of decrease) reflection. These combined antireflection/anti-soiling coatings passed PV industry standard module reliability tests as well as coating-specific abrasion tests, showing that they have the durability needed for decades in the field. Swift Coat scaled the AIDA hardware and deposition process to make mini-modules that were monitored for nearly two years during field tests administered by a third party, as well as demonstrated scaling to the widths of full-sized modules. The fielded mini-modules outperformed reference modules (with commercial antireflection coatings) in two locations, providing a 1% absolute average performance boost and larger increases during periods of heavier soiling. Swift Coat’s cost analysis indicated a coating manufacturing cost below the sales price of today’s antireflection coatings. More than five module manufacturers sampled and assessed the coatings, and three provided letters of support. The coating developed in this project increases the energy output of PV modules, thereby decreasing the cost per kilowatt-hour of solar energy generated. Cheaper solar electricity benefits the public by accelerating the transition to a stable, affordable, carbon-free energy economy. In addition, for select applications in which PV modules are highly visible—such as on residential rooftops—the coating provides an aesthetic benefit because it stays cleaner than today’s modules. Finally, Swift Coat and its prospective customers are U.S. companies, and successful commercialization of this technology will provide U.S. jobs and a secure solar supply chain.

14 SOLAR ENERGY↗