Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase kinetics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Real-Time Optical Monitoring and Simulations of Gas Phase Kinetics in InN Vapor Phase Epitaxy at High Pressure

Understanding the kinetics of nucleation and coalescence of heteroepitaxial thin films is a crucial step in controlling a chemical vapor deposition process, since it defines the perfection of the heteroepitaxial film both in terms of extended defect formation and chemical integrity of the interface. The initial nucleation process also defines the film quality during the later stages of film growth. The growth of emerging new materials heterostructures such as InN or In-rich Ga(x)In(1-x)N require deposition methods operating at higher vapor densities due to the high thermal decomposition pressure in these materials. High nitrogen pressure has been demonstrated to suppress thermal decomposition of InN, but has not been applied yet in chemical vapor deposition or etching experiments. Because of the difficulty with maintaining stochiometry at elevated temperature, current knowledge regarding thermodynamic data for InN, e.g., its melting point, temperature-dependent heat capacity, heat and entropy of formation are known with far less accuracy than for InP, InAs and InSb. Also, no information exists regarding the partial pressures of nitrogen and phosphorus along the liquidus surfaces of mixed-anion alloys of InN, of which the InN(x)P(1-x) system is the most interesting option. A miscibility gap is expected for InN(x)P(1-x) pseudobinary solidus compositions, but its extent is not established at this point by experimental studies under near equilibrium conditions. The extension of chemical vapor deposition to elevated pressure is also necessary for retaining stoichiometric single phase surface composition for materials that are characterized by large thermal decomposition pressures at optimum processing temperatures.

Dietz, Nikolaus↗
DOE OSTI2023

Hydro-Code Implementation and Testing of a Kinetic Phase Transition Framework

In this report we describe the Kinetic Phase Transition (KPT) framework that has been worked out over the last 10 years (from around 2014) and the implementation of it into three different codes, the one-dimensional hydro- LASLO and the three-dimensional magneto-hydro- ALEGRA, Sandia codes, via subroutines in the LAMBDA Equations of State and constitutive models package, and Flag, an arbitrary Lagrangian-Eulerian multiphysics code developed within the Lagrangian Applications project (LAP) at LANL. We discuss the introduction of phase mass (and/or volume) fractions that are needed in a code for it to be ‘phase aware’, that is, not only the thermodynamic state is known in each point but also the mixture of the materials’ phases in that point. Further we point to the need of a full Equations of State for each phase in a material to achieve phase awareness and we review the equilibrium phase model, where a phase mixture is at its lowest Gibbs free energy state, to make this point clear. Contrasting the kinetic phase transition to this equilibrium model seamlessly introduce us to the KPT framework that is subsequently thoroughly discussed. While the determination of the total state and the states and mass fractions of phases in each point is a problem that can borrow many of its numerical details from Eulerian codes and mixture of materials (not phases), the update of mass fractions with time in a KPT framework needs a new set of considerations. General for any update model is that we need to prevent mass fractions from becoming unphysical (negative or their sum to be larger than one). We have solved this problem by implementing a subdivision of the hydro time step that prevents the phase from being fully present to not present at all in one subdivided time step by limiting the size of the subdivided time step. This scheme also corrects numerical problems from abrupt changes in parameter values, the so called Gibbs phenomena, that gives rise to slushing between phases in the KPT framework. Interspersed throughout the report are discussions on different thermodynamics considerations. EOS validity windows, limitations on the EOS phase space, are needed for the KPT framework and are discussed separately and exemplified. The KPT framework described in this report has been verified by code comparison, but validation is still an active area of research. There is room for improvement in the update model, both in the model for determination of rates and in how to prevent the mass fractions from becoming unphysical. In addition, the parameters in the KPT update model and the placement of the phase boundary in the EOS phase space, and interactions with other constitutive models, are closely related and interfering with each other. One possible way forward is to simultaneously develop KPT parameters, EOS, and constitutive models for each material.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1980

Gas phase kinetics during normal combustion

The role of gas phase kinetics during combustion was explored in the steady state modeling efforts and in the analysis of ignition phenomena. In both cases it was shown that the combustion characteristics of some high energy ingredients and propellants are strongly affected, if not dictated, by the gas phase reactions which take place.

Price, C. F.↗
DOE OSTI2022

Parameter study of a Kinetic Phase Transition model

We investigate the ability of the two model parameters in the Kinetic Phase Transition (KPT) model of Carl Greeff to describe phase transitions of various types when combined with the tin Equation of states for the phases, SESAME 2162. While the two parameters are correlated, one combination can be associated with the nucleation process giving rise to the hysteresis seen in phase transition paths in pressure-temperature space and another can be associated with the overall timescale of the transition. We acknowledge the desire to have a model where the parameters are more independent of each other for easier model parameter determination.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Reduced-order condensed-phase kinetic models for polyethylene, polypropylene and polystyrene thermochemical recycling

Thermochemical recycling of plastic waste (PW) into chemicals and energy vectors requires coupling particle and reactor-scale simulations to accurate condensed phase pyrolysis mechanisms for each constituent. This work proposes a methodology to derive reduced-order condensed-phase kinetic models from validated semi-detailed kinetic mechanisms. Two types of kinetic models are obtained for polyethylene (PE), polypropylene (PP) and polystyrene (PS): reduced semi-detailed models and multi-step fully lumped ones. These families offer different compromises between accuracy and computational cost. The former employ 50–100 gas + liquid species and describe both the radical degradation and the detailed carbon distribution of the products. Conversely, the latter involves 5–10 species per polymer tracking only the main petroleum cuts. The kinetic mechanisms are complemented by the definition of thermochemical properties of gas, liquid, and solid-phase species, accounting for phase-transitions through pseudo-chemical reactions. Model validations are performed by comparison with experimental data and the original semi-detailed mechanisms in terms of mass loss, heat fluxes and product distribution profiles. The resulting CHEMKIN-like condensed-phase models are attached as Supplementary Material and as a GitHub repository. Extending the proposed approach to other polymers and coupling it with existing subsets in the CRECK kinetic framework (e.g., biomass, PVC, PET) offers a powerful tool to model thermochemical recycling of PW and biomass/PW mixtures.

kinetics↗
DOE OSTI2025

A Semi-Detailed Pyrolytic Gas-Phase Kinetic Model for the Volatiles of Polyethylene Thermal Degradation

This work presents a semi-detailed kinetic model to address the pyrolytic gas-phase reactivity of volatiles formed during thermal degradation of polyethylene (PE). The model builds on a validated multi-step condensed-phase model and employs validated lumping approaches. Short-chain compounds are modelled with high detail, while long-chain ones are described by surrogate species representative of diesel-cuts (NC16H32) and waxes (NC30H60). The reactivity of short chains is described through the comprehensive CRECK kinetic model, updated to align C5-C7 olefins based on recent literature experimental data. Due to the lack of experimental data for longer olefins, their reactivity is modeled by analogy to the shorter ones, ensuring an asymptotic behavior with increasing carbon numbers. The semi-detailed model is validated through experimental data on PE pyrolysis, assuming an instantaneous mixing of the inert inlet flow with released volatiles, followed by a segregated plug-flow behavior. Validation across different reactor setups confirms the model’s capability to predict detailed product distributions. Despite minor discrepancies, the proposed model effectively captures experimental trends. Further work will address modelling the reactivity in oxygen-containing environments.

kinetics↗
DOE OSTI2025

A Semi-Detailed Pyrolytic Gas-Phase Kinetic Model for the Volatiles of Polyethylene Thermal Degradation

This work presents a semi-detailed kinetic model to address the pyrolytic gas-phase reactivity of volatiles formed during thermal degradation of polyethylene (PE). The model builds on a validated multi-step condensed-phase model and employs validated lumping approaches. Short-chain compounds are modelled with high detail, while long-chain ones are described by surrogate species representative of diesel-cuts (NC16H32) and waxes (NC30H60). The reactivity of short chains is described through the comprehensive CRECK kinetic model, updated to align C5-C7 olefins based on recent literature experimental data. Due to the lack of experimental data for longer olefins, their reactivity is modeled by analogy to the shorter ones, ensuring an asymptotic behavior with increasing carbon numbers. The semi-detailed model is validated through experimental data on PE pyrolysis, assuming an instantaneous mixing of the inert inlet flow with released volatiles, followed by a segregated plug-flow behavior. Validation across different reactor setups confirms the model’s capability to predict detailed product distributions. Despite minor discrepancies, the proposed model effectively captures experimental trends. Further work will address modelling the reactivity in oxygen-containing environments.

kinetics↗
NASA NTRS1988

An atmospheric pressure flow reactor: Gas phase kinetics and mechanism in tropospheric conditions without wall effects

A new type of gas phase flow reactor, designed to permit the study of gas phase reactions near 1 atm of pressure, is described. A general solution to the flow/diffusion/reaction equations describing reactor performance under pseudo-first-order kinetic conditions is presented along with a discussion of critical reactor parameters and reactor limitations. The results of numerical simulations of the reactions of ozone with monomethylhydrazine and hydrazine are discussed, and performance data from a prototype flow reactor are presented.

Koontz, Steven L.↗
DOE OSTI2024

Phase transition kinetics of superionic H2O ice phases revealed by Megahertz X-ray free-electron laser-heating experiments

Abstract H 2 O transforms to two forms of superionic (SI) ice at high pressures and temperatures, which contain highly mobile protons within a solid oxygen sublattice. Yet the stability field of both phases remains debated. Here, we present the results of an ultrafast X-ray heating study utilizing MHz pulse trains produced by the European X-ray Free Electron Laser to create high temperature states of H 2 O, which were probed using X-ray diffraction during dynamic cooling. We confirm an isostructural transition during heating in the 26-69 GPa range, consistent with the formation of SI-bcc. In contrast to prior work, SI-fcc was observed exclusively above ~50 GPa, despite evidence of melting at lower pressures. The absence of SI-fcc in lower pressure runs is attributed to short heating timescales and the pressure-temperature path induced by the pump-probe heating scheme in which H 2 O was heated above its melting temperature before the observation of quenched crystalline states, based on the earlier theoretical prediction that SI-bcc nucleates more readily from the fluid than SI-fcc. Our results may have implications for the stability of SI phases in ice-rich planets, for example during dynamic freezing, where the preferential crystallization of SI-bcc may result in distinct physical properties across mantle ice layers.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1987

Phase separation kinetics in immiscible liquids

The kinetics of phase separation in the succinonitrile-water system are being investigated. Experiments involve initial physical mixing of the two immiscible liquids at a temperature above the consolute, decreasing the temperature into the miscibility gap, followed by iamging of the resultant microstructure as it evolves with time. Refractive index differences allow documentation of the changing microstructures by noninvasive optical techniques without the need to quench the liquid structures for analysis.

Ng, Lee H.↗
NASA NTRS1986

Phase separation kinetics in immiscible liquids

The kinetics of phase separation in the succinonitrile-water system are being investigated. Experiments involve initial physical mixing of the two immiscible liquids at a temperature above the consolute, decreasing the temperature into the miscibility gap, followed by imaging of the resultant microstructure as it evolves with time. Refractive index differences allow documentation of the changing microstructures by noninvasive optical techniques without the need to quench the liquid structures for analysis.

Sadoway, D. R.↗
DOE OSTI2022

Assessment of Physics Models for Phase Transition Kinetics

The time dependence of phase diagrams and how to model rate dependent transitions remains one of the key unanswered questions in physics. When a material is loaded dynamically through equilibrium phase boundaries, it is the kinetics that determines the real time expression of a phase transition. Here we report the atomic and nanosecond-scale quantification of kinetics of shock-driven phase transition in multiple materials. We uniquely make use of a both a simple shock as well as shock-and-hold loading pathways compress different crystalline solids and induce structural phase transitions below melt. Coupling shock loading with time-resolved synchrotron x-ray diffraction (DXRD), we probe the structural transformations of these solids in the short-lived high pressure and temperature states generated. The novelty and power of using DXRD for the assessment of kinetics of phase transitions lies in the ability to discover and identify new phases and to examine kinetics without prior knowledge of a material's phase diagram. Our results provide a quantified expression and a physics model of kinetics of formation of high-pressure phases under shock loading: transition incubation time, evolution, completion time and crystallization rate.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Elucidating the Microscale Behavior and Phase Separation Kinetics of Thermally Responsive Ionic Liquid–Water Mixtures

Thermally responsive ionic liquids (ILs) exhibit liquid-liquid phase separation into a water-rich (WR) and ionic-liquid-rich (ILR) phase when heated above a lower critical solution temperature (LCST). This phase behavior has been leveraged for applications ranging from forward osmosis (FO) desalination, where the IL acts as a draw solute, to refrigeration and dehumidification cycles, where the IL acts as a liquid desiccant. While significant effort has been devoted to characterizing the thermodynamic and thermophysical properties of LCST ILs, their phase separation kinetics have not been investigated. In this work, we describe the macroscale phase separation kinetics (phase separation time) by gleaning insight into the microscale colloidal behavior of aqueous mixtures of four different materials, P 4444 TFA (tetrabutylphosphonium-2,4-trifluoroacetate), P 4444 DMBS (tetrabutylphosphonium-2,4-dimethyl-benzenesulfonate), N 4444 Sal (tetrabutylammonium salicylate), and P 4444 Sal (tetrabutylphosphonium salicylate) as a function of IL concentration at a separation temperature of 70 °C. We report the discontinuous microscale size distributions for each material and correlate their theoretical settling velocities to experimental phase separation times. The results indicate that a simple Stokes' law model can predict the phase separation time within reasonable accuracy. Overall, this work lays the foundation for understanding the micro- to macroscale phase separation behavior and kinetics of LCST ILs for various water-energy applications.

LCST↗
NASA NTRS1989

Phase transformation kinetics in finite inhomogeneously nucleated systems

Phase transformation kinetics that occur by a nucleation and growth process are investigated. A simple discrete space and time model is used for the dynamics and analytical results are obtained for the volume fraction of the material transformed for both finite systems and a special example of an inhomogeneously nucleated system. The theory is developed for two cases, initial nucleation, and continuous nucleation. The results are compared with simulations of the model.

Weinberg, Michael↗
NASA NTRS1991

Role of valence electrons in phase transformation kinetics of thallium and its dilute alloys

The kinetics of the phase transformation of thallium and its dilute alloys were investigated using XRD and calorimetry. Pure thallium exhibits a beta(bcc) to alpha(hcp) phase transformation on cooling at 508 K. With alloying additions, the crystal structure for each phase does not change, although the size of the unit cell increases. The enthalpy and the temperature of phase transformation of each alloy have been determined. The chemical free energy change associated with the phase transformation of each alloy was calculated. The valence electrons make an outstanding contribution to the chemical free energy change required for the phase change.

Ahmed, R.↗