Manufacturing Energy and Greenhouse Gas Emissions Associated with United States Consumption of Organic Petrochemicals
Not Available
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
SEARCH · Engineering Papers
Results for “petrochemical”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Creep and corrosion-resistant cast alumina-forming alloys for high temperature service in industrial and petrochemical applications
An austenitic Ni-base alloy, consisting essentially of, in weight percent: 2.5 to 4.75 Al; 21 to 26 Cr; 20 to 40 Fe; 0.75 to 2.5 total of at least one element elected from the group consisting of Nb and Ta; 0 to 0.25 Ti; 0.09 to 1.5 Si; 0 to 0.5 V; 0 to 2 Mn; 0 to 3 Cu; 0 to 2 of at least one element selected from the group consisting of Mo and W; 0 to 1 of at least one element selected from the group consisting of Zr and Hf; 0 to 0.15 Y; 0.3 to 0.55 C; 0.005 to 0.1 B; 0 to 0.05 P; less than 0.06 N and balance Ni (30 to 46 Ni), wherein the weight percent Ni is greater than the weight percent Fe, and wherein the ratio Ni/(Fe+2*C) is between 1.02 and 1.067.
Muralidharan, Govindarajan↗
Chemical Recycling of Plastic Waste to Higher Value Lubricants
The aim of this project was to develop scalable methods to convert plastic waste to petrochemical-equivalent feedstocks and demonstrate their utility in lubricant base oil and wax applications. These objectives were partially accomplished, by scaling up the synthesis of platinum-on-strontium titanate catalysts to twenty gram batches, scaling up the conversion of plastic waste to twenty-five grams of plastic, producing high-melt waxes and characterizing their properties, and demonstrating the purification of high-melt waxes. High-melt waxes are one petrochemical-equivalent feedstock that can be made from plastic waste, consisting of a hard wax with a melt point above 65 C. They are used as ingredients in hot melt adhesives, coatings, and cosmetics. Producing a petrochemical-equivalent feedstock from plastic waste provides an advantage in lower carbon footprint and manufacturing cost, as the waste feedstock costs less than crude oil.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Performance Advantaged Thermosets from Bioderived Amines: Benefits in Manufacturing, Performance, and End-of-Life
Biomass derived monomers can offer unique functionality, often in the forms of heteroatoms, that is not easily accessible by routine petrochemical routes. Importantly, many of these monomers offer the potential to replace the petrochemical monomers used in the manufacture of thermosets to enable expanded functionality and performance. In the present work, we leverage amine containing monomers that can be obtained via biological conversions in both epoxy and benzoxazine thermosets. These monomers have a wide degree of functionality available to them that augment the material properties. In the case of benzoxazines, monomers that contain both an amine and carboxylic acid are used and the presence of the carboxylic acid leads to an acceleration in cure kinetics and a dramatic reduction in cure temperature. For the epoxy thermosets, multifunctional amine monomers are used as a hardener and the properties of the resultant materials are found to scale with the spacing and identity between reactive centers. The amines can be further modified and reacted to produce a mixed network of triazines and epoxy-amines that enables the end-of-life degradation of these materials. Importantly, subsequent process analysis reveals that the use of bioderived amines can present dramatic reductions in both supply chain energy and GHG emissions while possessing a cost similar to their petrochemical counterparts. Overall, this work demonstrates the robust potential to use bioderived amines for performance advantaged properties.
bioderived monomers↗
Optimizing Multicomponent Distillation Configurations
Distillation is a ubiquitous process in the chemical and petrochemical industries to separate mixtures into their individual components and accounts for a large percentage of all separations in chemical and petrochemical plants. A large fraction of the separations are mixtures containing four or more components requiring multiple distillation columns that may not be optimized for energy efficiency. As a result, there are tens of thousands of suboptimal distillation columns in operation in the U.S. consuming approximately 2-3 Quads of energy per year. In addition, the equipment dedicated to separations contributes 40 – 70% of the capital and operating costs in a typical processing plant.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Dispersion curve regression – assisted wideband local wavenumber analysis for characterizing three-dimensional (3D) profile of hidden corrosion damage
Corrosion as common damage in civil, petrochemical, nuclear, and aerospace structures affects the integrity and safety of the structures and may lead to catastrophic failures. This paper presents dispersion curve regression-assisted local wavenumber analysis method, which can analyze the time–space wavefield containing wideband information of wave-damage interaction and further extract the structural information carried by such wavefield for characterizing hidden corrosion damage in an isotropic plate. To acquire the time–space wavefield, a noncontact scanning laser Doppler vibrometer is used. In our analysis method, the acquired time–space wavefield is firstly processed to generate a local wavenumber function. The derived wavenumber function is further analyzed with a dispersion curve regression step, which searches in a set of theoretical frequency-wavenumber dispersion curves for different plate thicknesses and identifies the optimal plate thickness whose theoretical curve best matches the frequency-wavenumber relation contained in the local wavenumber function. By this means, a 3D profile including both in plane and thickness dimensions of the structure can be constructed for corrosion visualization and quantification. The experimental study demonstrates that our method can quantify the profile of hidden uniform corrosion in metal plates in terms of its in-plane shape and size as well as its out-of-plane depth in the subwavelength scale. Moreover, compared to previous Lamb wave-based corrosion inspection methods, our technique allows for noncontact 3D characterization of hidden corrosion from a far distance to the structure. Finally, we believe this work will inspire new 3D damage quantification methods that are based on wavefield analysis as well as enable potential applications for the quantification of hidden corrosion in civil, petrochemical, nuclear, and aerospace structures.
42 ENGINEERING↗
Net-Zero Ethylene: On the Sustainability, Economics, and Scalability of Synthetic and Fossil Production Pathways
The ethylene industry has contributed over 260 million tons of CO 2 annually, warranting a more sustainable approach. The conversion of CO 2 and H 2 O into ethylene is an appealing technology capable of decoupling chemical production from fossil fuels. However, the large energy demand from this process can potentially lead to adverse environmental impacts. Here, in this article, we critically analyze the economic viability, environmental impact, and scalability of the conversion of CO 2 to ethylene via electrochemical reduction (CO 2 R) and compare this with those of CO 2 -neutral fossil routes utilizing carbon capture and direct air capture. Ethylene derived from CO 2 may be economically competitive under optimistic conditions; however, its large energy requirements pose environmental and scalability challenges. Meeting forecast 2050 ethylene demand using CO 2 R would require half of all electricity produced globally today, and, if powered by solar PV, may have greater CO 2 emissions than current petrochemical ethylene production, negating the purpose of this technology. Using Carbon Capture and Storage and Direct Air Capture to decarbonize petrochemical pathways would require roughly an order of magnitude less energy but would have disproportionate health and climate impacts. Lastly, the analysis highlights the importance of low-carbon energy sources to ensure sustainable CO 2 R ethylene production.
CO2R↗
Liquid Fed Pyrolysis of Polyethylene Films: Environmental and Economic Assessments of Co-located and Remotely-Located U.S. Facilities
Polyethylene (PE) films are one of the highest production volume plastic products, but they have very low recycling rates. A novel liquid fed pyrolysis process (LFP) is an advanced recycling technology that can be applied to waste PE films. In this work, two environmental and six economic metrics were evaluated for the LFP process under different scenarios with a baseline production capacity of 8,400 Metric Tons (MT) of pyrolysis products/year. The studied scenarios considered process improvement such as heat integration, changing the final product yields, and location of the LFP process facility (i.e., co-located at a petrochemical facility or located remotely). Results show that producing refined pyrolysis wax in remote areas is the most environmentally favorable and profitable scenario. The LFP process co-located at a petrochemical facility and selling only liquid and gaseous pyrolysis products to the facility would require a capacity of >18,000 MT/year to be economically feasible. Heat integration led to greenhouse gas emission savings of at least 14%, 19%, and 32% for the pyrolysis oil, gas, and wax products, respectively. Fianlly, the LFP process in remote and less populated locations producing a high yield of refined wax may be a feasible solution for increasing recycling rates of PE films.
Advanced recycling↗
Engineering isoprenoids production in metabolically versatile microbial host Pseudomonas putida
Abstract With the increasing need for microbial bioproduction to replace petrochemicals, it is critical to develop a new industrial microbial workhorse that improves the conversion of lignocellulosic carbon to biofuels and bioproducts in an economically feasible manner. Pseudomonas putida KT2440 is a promising microbial host due to its capability to grow on a broad range of carbon sources and its high tolerance to xenobiotics. In this study, we engineered P. putida KT2440 to produce isoprenoids, a vast category of compounds that provide routes to many petrochemical replacements. A heterologous mevalonate (MVA) pathway was engineered to produce potential biofuels isoprenol (C 5 ) and epi-isozizaene (C 15 ) for the first time in P. putida . We compared the difference between three different isoprenoid pathways in P. putida on isoprenol production and achieved 104 mg/L of isoprenol production in a batch flask experiment through optimization of the strain. As P. putida can natively consume isoprenol, we investigated how to prevent this self-consumption. We discovered that supplementing l -glutamate in the medium can effectively prevent isoprenol consumption in P. putida and metabolomics analysis showed an insufficient energy availability and an imbalanced redox status during isoprenol degradation. We also showed that the engineered P. putida strain can produce isoprenol using aromatic substrates such as p -coumarate as the sole carbon source, and this result demonstrates that P. putida is a valuable microbial chassis for isoprenoids to achieve sustainable biofuel production from lignocellulosic biomass. Graphical Abstract
09 BIOMASS FUELS↗
Plasma-Assisted Catalytic Conversion of CO 2 and Propane to Propylene and CO
Ethylene and propylene are critical pillars of the petrochemical and plastics industry. The current industrial route for producing these olefins, which is via steam cracking process, is extremely endothermic and highly CO 2 -intensive. In this work, Susteon, in partnership with the North Carolina State University (NCSU), New Castle University (NU), and SoCalGas, has investigate catalytic materials and process designs to produce propylene from propane by utilizing CO 2 as a soft oxidant in the presence of low temperature dielectric barrier discharge plasma. This route integrates the effect of catalysis and the presence of a plasma environment to intensify the production of the important three carbon olefin from propane at a lower temperature and near atmospheric pressure. This CO 2 oxidative dehydrogenation (CO 2 -ODH) process coproduces CO, which is a valuable by-product, critical for the petrochemical sector. Through this work, Susteon and the team have made significant progress in developing catalysts and gaining insights on the plasma-assisted CO 2 -ODH process.
01 COAL, LIGNITE, AND PEAT↗
How much is surface dopant enough to maximize CO2-to-liquid chemicals conversion at industrially relevant current density?
This invited talk will be presented at the symposium "Waste Feedstock to Fuels and Petrochemicals”, Fuels and Petrochemical Division at the 2024 AIChE Annual Meeting. In this study, we will discuss how minute amount of surface heteroatoms would maximize CO2 reduction to formate/formic acid at industrially relevant current densities and high selectivity which was validated by both experimental and computational studies. The outstanding performance of the best-in-class catalysts in both H-cell and full-cell electrolyzer cell is also demonstrated. Our findings would provide additional design concepts of high performance CO2R electrocatalysts.
Nguyen Phan, Thuy Duong↗
Chapter 14: Chemical Recycling of Commodity Plastics
Global plastic production is at an all-time high and shows little signs of slowing down. Less than 10% of all plastic produced is recycled, with approximately 90% entering landfills, incinerators, and oceans. This has led to a rapid accumulation of single-use plastic waste across the planet. Mechanical recycling has been executed at the industrial level to manage plastic waste for decades. However, mechanically recycled plastic products are significantly limited by contamination and low performance. Chemical recycling technologies offer another pathway for achieving plastic circularity. This chapter highlights the current state-of-the-art chemical recycling technologies for plastic decomposition into monomers, fuels, or other petrochemical feedstocks. A brief description of recyclability of plastics and the waste sorting process is provided followed by a high-level overview of chemical recycling technologies. Products, key barriers, and limitations are also discussed as well as a brief overview of techno-economics.
chemical recycling↗
High‐Capacity Splitting of Mono‐ and Dibranched Hexane Isomers by a Robust Zinc‐Based Metal–Organic Framework
Abstract High‐efficiency separation of C 6 alkanes, particularly the mono‐ and dibranched isomers by using porous solids, is of paramount significance in the petrochemical industry and, remains a daunting challenge. In this work, we report the complete separation of linear/monobranched hexanes from their dibranched isomers through selective size‐exclusion by a microporous MOF, Zn‐tcpt (H 3 tcpt=2,4,6‐tris(4‐carboxyphenoxy)‐1,3,5‐triazine), with a two‐fold interpenetrated structure of hms nets. Importantly, its adsorption capacity and selectivity are notably higher than those of the previously reported adsorbents that can split mono‐ and dibranched alkane isomers. Dynamic breakthrough measurements verify the excellent separation of C 6 alkane isomers by Zn‐tcpt, and the size‐exclusion based separation mechanism has been confirmed by ab initio materials modeling. The high‐efficiency separation of alkane isomers by Zn‐tcpt can be attributed to its optimal pore dimensions as well as high porosity.
Yu, Liang↗
Metal‐Organic Frameworks for C6 Alkane Separation
Abstract The separation of alkane isomers is an important yet challenging process in the petrochemical industry. Being a crucial step to produce premium gasoline components as well as optimum ethylene feed, the current industrial separation by distillation is extremely energy intensive. Adsorptive separation based on zeolite is limited by insufficient adsorption capacity. Metal‐organic frameworks (MOFs) hold enormous promise as alternative adsorbents due to their diverse structural tunability and exceptional porosity. Precise control of their pore geometry/dimensions has led to superior performance. In this minireview, we highlight the recent progresses in developing MOFs for the separation of C6 alkane isomers. Representative MOFs are reviewed based on their separation mechanisms. Emphasis is put on the material design rationale for achieving optimal separation capability. Finally, we briefly discuss the existing challenges, possible solutions, and future directions of this important field.
Xie, Feng↗
High–Capacity Splitting of Mono– and Dibranched Hexane Isomers by a Robust Zinc–Based Metal–Organic Framework
High-efficiency separation of C 6 alkanes, particularly the mono- and dibranched isomers by using porous solids, is of paramount significance in the petrochemical industry and, remains a daunting challenge. In this work, we report the complete separation of linear/monobranched hexanes from their dibranched isomers through selective size-exclusion by a microporous MOF, Zn-tcpt (H3tcpt=2,4,6-tris(4-carboxyphenoxy)-1,3,5-triazine), with a two-fold interpenetrated structure of hms nets. Importantly, its adsorption capacity and selectivity are notably higher than those of the previously reported adsorbents that can split mono- and dibranched alkane isomers. Dynamic breakthrough measurements verify the excellent separation of C 6 alkane isomers by Zn-tcpt, and the size-exclusion based separation mechanism has been confirmed by ab initio materials modeling. Furthermore, the high-efficiency separation of alkane isomers by Zn-tcpt can be attributed to its optimal pore dimensions as well as high porosity.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Metal–Organic Frameworks for C6 Alkane Separation
The separation of alkane isomers is an important yet challenging process in the petrochemical industry. Being a crucial step to produce premium gasoline components as well as optimum ethylene feed, the current industrial separation by distillation is extremely energy intensive. Adsorptive separation based on zeolite is limited by insufficient adsorption capacity. Metal-organic frameworks (MOFs) hold enormous promise as alternative adsorbents due to their diverse structural tunability and exceptional porosity. Precise control of their pore geometry/dimensions has led to superior performance. In this minireview, we highlight the recent progresses in developing MOFs for the separation of C6 alkane isomers. Representative MOFs are reviewed based on their separation mechanisms. Emphasis is put on the material design rationale for achieving optimal separation capability. Lastly, we briefly discuss the existing challenges, possible solutions, and future directions of this important field.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Development of high‐performance partially biobased thermoset polyester using renewable building blocks from isosorbide, 1,3‐propanediol, and fumaric acid
Abstract Research on biobased thermoset resins has been overlooked when compared with the rapid progress on biobased thermoplastics. The objective of this work was to develop unsaturated polyester prepolymers based on building blocks derived from renewable raw materials, namely, biobased isosorbide, 1,3‐propanediol, and fumaric acid, with petroleum‐derived phthalic anhydride. The prepolymers developed herein behaved as low‐molecular weight macromolecules (oligoesters), with M n varying between 1.2 and 1.5 kDa, but achieved a high bio‐content of up to 87.1 wt%. The prepolymers were incorporated into reactive diluents comprising a blend of 2‐hydroxyethyl methacrylate and styrene, formulated to be eco‐friendlier and less toxic than typical styrene‐only incorporation approach, thus resulting in resins with viscosities between 750 and 950 cP. These resins are suitable for use in various fiber‐reinforced polymer production techniques, such as manual lamination, vacuum infusion, and pultrusion, having the benefit of presenting over 50 wt% of bio‐content in some formulations. Moreover, the crosslinked polyester resins (thermosets) exhibit comparable mechanical and thermomechanical behavior to their petrochemical‐based counterparts, with modulus of elasticity and tensile strength of up to 3.9 GPa and 62.1 MPa, respectively, and glass transition temperatures of up to 106°C, making them greener alternatives for high‐performance structural applications.
Hofmann, Mateus↗
Fractionated and purified hybrid poplar lignins as a polyol replacement in rigid polyurethane/polyisocyanurate foams
This study introduces fractionated lignin as an innovative component in the formulation of rigid polyurethane/polyisocyanurate (PUR/PIR) foams. Low-density PUR/PIR rigid foams were prepared by replacing 80% of the petrochemical-based polyol with a hybrid poplar (HP) lignin, recovered via alkaline pretreatment, and also with a fraction of this lignin, isolated via the Aqueous Lignin Purification with Hot Agents (ALPHA) process. The as-recovered HP and ALPHA-fractionated HP lignins were characterized to determine hydroxyl content, molecular weight (Mw) distribution, and pH. Both lignin-based foams met minimum standard requirements in terms of closed cell content, compression strength, and thermal conductivity. Notably, the foams made with ALPHA-based lignin outperformed the as-recovered lignin-based foams in all measured foam properties. Moreover, the ALPHA-based foam had comparable performance to the control foam (without lignin) except for density and even surpassed the control foam in closed cell content and compressive strength. This investigation of the molecular properties of lignin suggests that significant reductions in lignin average molecular weight and polydispersity (PDI) can positively impact the properties of lignin-based rigid foams.
09 BIOMASS FUELS↗