Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “petrochemical”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Design issues of a reinforcement-based self-learning fuzzy controller for petrochemical process control

Fuzzy logic controllers have some often-cited advantages over conventional techniques such as PID control, including easier implementation, accommodation to natural language, and the ability to cover a wider range of operating conditions. One major obstacle that hinders the broader application of fuzzy logic controllers is the lack of a systematic way to develop and modify their rules; as a result the creation and modification of fuzzy rules often depends on trial and error or pure experimentation. One of the proposed approaches to address this issue is a self-learning fuzzy logic controller (SFLC) that uses reinforcement learning techniques to learn the desirability of states and to adjust the consequent part of its fuzzy control rules accordingly. Due to the different dynamics of the controlled processes, the performance of a self-learning fuzzy controller is highly contingent on its design. The design issue has not received sufficient attention. The issues related to the design of a SFLC for application to a petrochemical process are discussed, and its performance is compared with that of a PID and a self-tuning fuzzy logic controller.

Yen, John↗
NASA NTRS1978

Typical uses of NASTRAN in a petrochemical industry

NASTRAN was principally used to perform failure analysis and redesign process equipment. It was also employed in the evaluation of vendor designs and proposed design modifications to existing process equipment. Stress analysis of forced draft fans, distillation trays, metal stacks, jacketed pipes, heat exchangers, large centrifugal fans, and agitator support structures are described.

Winter, J. R.↗
NASA NTRS1981

Petrochemical constraints on lateral transport during lunar basin formation

Lunar ANT petrochemistry correlates with longitude, allowing the sampled region of the moon to be divided into three geochemical provinces: western (Apollo 12 and 14), near-eastern (Apollo 11, 15, 16 and 17) and far-eastern (Luna 16, 20 and 24). A western ANT rock has a far greater Eu anomaly for a given Sm content than does a near-eastern ANT rock, which is in turn has a somewhat greater Eu anomaly than does a far-eastern ANT rock. Distinct differences are also observed in Sc/Sm and Ti/Sm ratios (western ANT rocks have lower ratios) and in the abundances of alkali-rich anorthosites (five of the six known anorthosites from the west are approximately four times richer in Na and K than are ferroan anorthosites, whereas none of the 40 known anorthosites from the near east is alkali-rich). The existence of this distinct correlation of ANT geochemical properties with longitude implies that even during the first few hundred m.y. of lunar history basin-forming impacts were not capable of efficiently redistributing material laterally across the lunar surface.

Warren, P. H.↗
NASA NTRS1988

Petrochemical and petrophysical characterization of the lower crust and the Moho beneath the West African Craton, based on Xenoliths from Kimberlites

Additional evidence to the composition of the lower crust and uppermost mantle was presented in the form of xenolith data. Xenoliths from the 2.7-Ga West African Craton indicate that the Moho beneath this shield is a chemically and physically gradational boundary, with intercalations of garnet granulite and garnet eclogite. Inclusions in diamonds indicate a depleted upper mantle source, and zenolith barometry and thermometry data suggest a high mantle geotherm with a kink near the Moho. Metallic iron in the xenoliths indicates that the uppermost mantle has a significant magnetization, and that the depth to the Curie isotherm, which is usually considered to be at or above the Moho, may be deeper than the Moho.

Haggerty, Stephen E.↗
NASA NTRS1984

Biocatalyzed processes for production of commodity chemicals: Assessment of future research advances for N-butanol production

This report is a summary of assessments by Chem Systems Inc. and a further evaluation of the impacts of research advances on energy efficiency and the potential for future industrial production of acetone-butanol-ethanol (ABE) solvents and other products by biocatalyzed processes. Brief discussions of each of the assessments made by CSI, followed by estimates of minimum projected energy consumption and costs for production of solvents by ABE biocatalyzed processes are included. These assessments and further advances discussed in this report show that substantial decreases in energy consumption and costs are possible on the basis of specific research advances; therefore, it appears that a biocatalyzed process for ABE can be developed that will be competitive with conventional petrochemical processes for production of n-butanol and acetone. (In this work, the ABE process was selected and utilized only as an example for methodology development; other possible bioprocesses for production of commodity chemicals are not intended to be excluded.) It has been estimated that process energy consumption can be decreased by 50%, with a corresponding cost reduction of 15-30% (in comparison with a conventional petrochemical process) by increasing microorganism tolerance to n-butanol and efficient recovery of product solvents from the vapor phase.

Ingham, J. D.↗
NASA NTRS1995

Discrimination of alkalinity in granitoid Rocks: A potential TIMS application

In mineral exploration, the ability to distinguish and map petrochemical variations of magmatic rocks can be a useful reconnaissance tool. Alkalinity is one such petrochemical parameter and is used in the characterization of granitoid rocks. In quartz normative plutonic rocks, alkalinity is related to the composition and abundance of feldspars. Together with quartz abundance, knowledge of feldspar modes allows the classification of these igneous rocks according to the Streckeisen diagram. Alternative classification schemes rely on whole rock geochemistry instead of mineral identifications. The relative ease of obtaining whole rock analyses means that geochemical classifications tend to be favored in exploration geology. But the technique of thermal infrared spectroscopy of rocks yields information on mineralogy and is one that can be applied remotely. The goal of the current work then is to establish whether data from TIMS can be used to distinguish the mineralogical variations that relate to alkalinity. An ideal opportunity to test this thesis arises from the work presented in a paper by Dewitt (1989). This paper contains the results of mapping and analysis of Proterozoic plutonic rocks in north-central Arizona. The map resulting from this work delineates plutons according to alkalinity in an effort to establish a trend or polarity in the regional magmatism. Also contained within this paper are brief descriptions of the mineralogy of half of the region's plutons. This combination of mineralogical and geochemical information was the rationale behind choosing this area as a site for TIMS over flights. A portion of the region centered on the northern Bradshaw Mountains was selected because it contains plutons of all three alkalinity classifications (alkali-calcic, calc-alkalic, and calic) present on DeWitt's map within a relatively small area. The site was flown in August of 1994 and the data received a few days before the writing of this manuscript. Most of this paper is devoted to the description of laboratory based spectroscopy and spectral simulations. These are required to gain insight into the correct procedures for enhancing the relatively small differences in the low spectral resolution TIMS data.

Ruff, Steven W.↗
NASA NTRS1966

Large seals fabricated from small segments reduce procurement lead time

Large diameter seals are fabricated from narrow strip stock welded in segments to form a complete ring. This technique could be used to reduce the cost of critical, large diameter seals in the heating and ventilating industry, petrochemical industry, and marine fabrication industry.

Daniels, C. M.↗
NASA NTRS1966

Computer program determines performance efficiency of remote measuring systems

Computer programs control and evaluate instrumentation system performance for numerous rocket engine test facilities and prescribe calibration and maintenance techniques to maintain the systems within process specifications. Similar programs can be written for other test equipment in an industry such as the petrochemical industry.

Merewether, E. K.↗
NASA NTRS1972

NASA technology utilization survey on composite materials

NASA and NASA-funded contractor contributions to the field of composite materials are surveyed. Existing and potential non-aerospace applications of the newer composite materials are emphasized. Economic factors for selection of a composite for a particular application are weight savings, performance (high strength, high elastic modulus, low coefficient of expansion, heat resistance, corrosion resistance,), longer service life, and reduced maintenance. Applications for composites in agriculture, chemical and petrochemical industries, construction, consumer goods, machinery, power generation and distribution, transportation, biomedicine, and safety are presented. With the continuing trend toward further cost reductions, composites warrant consideration in a wide range of non-aerospace applications. Composite materials discussed include filamentary reinforced materials, laminates, multiphase alloys, solid multiphase lubricants, and multiphase ceramics. New processes developed to aid in fabrication of composites are given.

Leeds, M. A.↗
NASA NTRS1973

The application of NASTRAN at Sperry Univac Holland

Very divergent problems arising with different calculations indicate that NASTRAN is not always accessible for common use. Problems with engineering, modelling, and use of the program system are analysed and a way of solution is outlined. Related to this, some supplementary modifications are made at Sperry Univac Holland to facilitate the program for the less skilled user. The implementation of a new element also gives an insight into the use of NASTRAN at Sperry Univac Holland. As the users of Univac computers are from very different kinds of industries like shipbuilders, petrochemical industries, and building industries, the variety of problems coming from these users is very large. This variety results in experience not with one special kind of calculation nor one special kind of construction, but with a wide area of problems arising in the use of NASTRAN. These problems can roughly be divided into three different groups: (1) recognition of what is to be calculated and how, (2) construction of a model, and (3) handling the NASTRAN program. These are the basic problems for every less skilled user of NASTRAN and the Application/Research Department of Sperry Univac has to give reasonable answers to these questions.

Koopmans, G.↗
NASA NTRS1974

Chemical composition of Luna 16 lunar regolith

Data on the chemical composition of regolith returned by the Luna 16 automatic station and two fragments of basalts from the lower layer of the core are presented. Spark mass spectrometric, primary X-ray spectral, emission spectral, and atomic absorption methods were used in the analysis. The regolith of mare provinces were shown to be a mixture of material of various origins. The source of the material of the mare regolith was principally basalts of the corresponding lunar lava maria. The regolith is genetically related to it. This follows from a comparison of the chemical composition, mineralogical, and petrochemical features of the basesalts and the regolith from the Sea of Fertility, Sea of Tranquillity, and Ocean of Storms, respectively.

Vinogradov, A. P.↗
NASA NTRS1974

Gamma-spectrometric analysis of Luna 16 sample of lunar surface material

Using a scintillation gamma spectrometer with shielding against anticoincidences, the content of the natural radioelements (K, U, and Th) and long-lived cosmogenic radioisotopes (Al-26, Na-22, and Mn-54) in a sample of Sea of Fertility regolith was determined. Based on the content data of natural radioelements, an attempt was made to classify this sample in the scale of petrochemical types of terrestrial rocks arranged in accordance with their silicic content and alkalinity. Within the frame of reference of calcium-uranium systematics of lunar samples, a comparison was made of the K/U ratio obtained for the Sea of Fertility sample with analogous data for other regions of the moon. Also discussed are problems on the depthwise distribution of cosmogenic radioisotopes along the regolith profile.

Surkov, Y. A.↗
NASA NTRS1975

Our national energy future - The role of remote sensing

An overview of problems and opportunities in remote sensing of resources. The need for independence from foreign and precarious energy sources, availability of fossil fuel materials for other purposes (petrochemicals, fertilizer), environmental conservation, and new energy sources are singled out as the main topics. Phases of response include: (1) crisis, with reduced use of petroleum and tapping of on-shore and off-shore resources combined; (2) a transition phase involving a shift from petroleum to coal and oil shale; and (3) exploitation of renewable (inexhaustible and clean) energy. Opportunities for remote sensing in fuel production and energy conservation are discussed along with problems in identifying the spectral signatures of productive and unproductive regions. Mapping of water resources, waste heat, byproducts, and wastes is considered in addition to opportunities for international collaboration.

Schmitt, H. H.↗