Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “particle subtraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

A High Resolution Study of the X-Ray Emission From 3C400.2

The ROSAT HRI observation of 3C400.2 was conducted and the data have been received by the PI. The data have been processed using the Extended Source Analysis SW (ESAS) developed by Steve Snowden for the analysis of extended objects with ROSAT. The ESAS SW models and subtracts the particle background of the ROSAT HRI which is the dominant contributor to the non-cosmic background in the HRI. The background-subtracted image was smoothed with an adaptive-smoothing algorithm in order to enhance faint structure but also to maintain the superb angular resolution of the HRI where a sufficient number of counts were available. We have also used the ESAS SW to analyze the existing archival PSPC data. We have generated background-subtracted and merged images from the multiple PSPC observations. In the future, we will conduct a detailed comparison between the HRI and PSPC images. In addition, we plan to use the existing archival ASCA data to better determine the spectrum as a function of position in the remnant. The PI has not been able to finish the analysis and write the paper due to his demands on his time supporting operations of the Chandra X-ray Observatory. The PI will have more time in the coming year and hopes to finish the analysis.

Plucinsky, Paul↗

Exotic energy injection in the early Universe. II. CMB spectral distortions and constraints on light dark matter

Here, we calculate the post-recombination contribution to the cosmic microwave background (CMB) spectral distortion due to general exotic energy injections, including dark matter (DM) decaying or annihilating to Standard Model particles. Upon subtracting the background distortion that would be present even without such energy injections, we find residual distortions that are still potentially large enough to be detectable by future experiments such as PIXIE. The distortions also have a high-energy spectral feature that is a unique signature of the injection of high-energy particles. We present a calculation of the global ionization history in the presence of decaying dark matter with sub-keV masses, and also show that previous calculations of the global ionization history in the presence of energy injection are not significantly modified by these additional spectral distortions. Our improved treatment of low-energy electrons allows us to extend calculations of the CMB anisotropy constraints for decaying DM down to arbitrarily low masses. We also recast these bounds as constraints on the coupling of axionlike particles to photons.

79 ASTRONOMY AND ASTROPHYSICS↗

Conditional quantum plasmonic sensing

The possibility of using weak optical signals to perform sensing of delicate samples constitutes one of the main goals of quantum photonic sensing. Furthermore, the nanoscale confinement of electromagnetic near fields in photonic platforms through surface plasmon polaritons has motivated the development of highly sensitive quantum plasmonic sensors. Despite the enormous potential of plasmonic platforms for sensing, this class of sensors is ultimately limited by the quantum statistical fluctuations of surface plasmons. Indeed, the fluctuations of the electromagnetic field severely limit the performance of quantum plasmonic sensing platforms in which delicate samples are characterized using weak near-field signals. Furthermore, the inherent losses associated with plasmonic fields levy additional constraints that challenge the realization of sensitivities beyond the shot-noise limit. Here, we introduce a protocol for quantum plasmonic sensing based on the conditional detection of plasmons. We demonstrate that the conditional detection of plasmonic fields, via plasmon subtraction, provides a new degree of freedom to control quantum fluctuations of plasmonic fields. This mechanism enables improvement of the signal-to-noise ratio of photonic sensors relying on plasmonic signals that are comparable to their associated field fluctuations. Consequently, the possibility of using weak plasmonic signals to sense delicate samples, while preserving the sample properties, has important implications for molecule sensing, and chemical detection.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DARK MATTER SEARCH USING CHANDRA OBSERVATIONS OF WILLMAN 1 AND A SPECTRAL FEATURE CONSISTENT WITH A DECAY LINE OF A 5 keV STERILE NEUTRINO

We report the results of a search for an emission line from radiatively decaying dark matter in the Chandra X-ray Observatory spectrum of the ultra-faint dwarf spheroidal galaxy Willman 1. 99% confidence line flux upper limits over the 0.4-7 keV Chandra bandpass are derived and mapped to an allowed region in the sterile neutrino mass-mixing angle plane that is consistent with recent constraints from Suzaku X-ray Observatory and Chandra observations of the Ursa Minor and Draco dwarf spheroidals. A significant excess to the continuum, detected by fitting the particle-background-subtracted source spectrum, indicates the presence of a narrow emission feature with energy 2.51 {+-} 0.07(0.11) keV and flux [3.53 {+-} 1.95(2.77)] x 10{sup -6} photons cm{sup -2} s{sup -1} at 68% (90%) confidence. Interpreting this as an emission line from sterile neutrino radiative decay, we derive the corresponding allowed range of sterile neutrino mass and mixing angle using two approaches. The first assumes that dark matter is solely composed of sterile neutrinos, and the second relaxes that requirement. The feature is consistent with the sterile neutrino mass of 5.0 {+-} 0.2 keV and a mixing angle in a narrow range for which neutrino oscillations can produce all of the dark matter and for which sterile neutrino emission from the cooling neutron stars can explain pulsar kicks, thus bolstering both the statistical and physical significance of our measurement.

79 ASTRONOMY AND ASTROPHYSICS↗

Examination of flow and nonflow factorization methods in small collision systems

Two-particle correlations have been used extensively to study hydrodynamic flow patterns in heavy-ion collisions. In small collision systems, such as $p + p$ and $p + A$, where particle multiplicities are much smaller than in $A + A$ collisions, nonflow effects from jet correlations, momentum conservation, particle decays, etc. can be significant, even when imposing a large pseudorapidity gap between the particles. A number of techniques to subtract the nonflow contribution in two-particle correlations have been developed by experiments at the CERN Large Hadron Collider (LHC) and then used to measure particle flow in $p + p$ and $p + Pb$ collisions. Recently, experiments at the BNL Relativistic Heavy Ion Collider (RHIC) have explored the possibility of adopting these techniques for small collision systems at lower energies. In this paper, we test these techniques using Monte Carlo generators pythia and hijing, which do not include any collective flow, and ampt, which does. We find that it is crucial to examine the results of such tests both for correlations integrated over particle transverse momentum $p_T$ and differentially as a function of $p_T$. Our results indicate reasonable nonflow subtraction for $p + p$ collisions at the highest LHC energies, while failing if applied to $p + p$ collisions at RHIC. In the case of $p + Au$ collisions at RHIC, both hijing and ampt results indicate a substantial over-estimate of nonflow for $p_T ≳ GeV/c$ and hence an underestimate of elliptic flow and overestimate of triangular flow.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Control of friction at the nanoscale

Methods and apparatus are described for control of friction at the nanoscale. A method of controlling frictional dynamics of a plurality of particles using non-Lipschitzian control includes determining an attribute of the plurality of particles; calculating an attribute deviation by subtracting the attribute of the plurality of particles from a target attribute; calculating a non-Lipschitzian feedback control term by raising the attribute deviation to a fractionary power .xi.=(2m+1)/(2n+1) where n=1, 2, 3 . . . and m=0, 1, 2, 3 . . . , with m strictly less than n and then multiplying by a control amplitude; and imposing the non-Lipschitzian feedback control term globally on each of the plurality of particles; imposing causes a subsequent magnitude of the attribute deviation to be reduced.

42 ENGINEERING↗

Design of a Particle Shadow-graph Velocimetry and Size (PSVS) System to Determine Particle Size and Density Distributions in Hanford Nuclear Tank Wastes - 12280

Accurate particle size and density distributions for nuclear tank waste materials are essential information that helps determine the engineering requirements for a host of waste management unit operations (e.g., tank mixing, pipeline transport, and filtration). The most prevalent approach for determining particle size and density distribution is highly laborious and involves identifying individual particles using scanning electron microscope/x-ray diffraction and then acquiring the density of the materials from the technical literature. Other methods simply approximate individual particle densities by assuming chemical composition, rather than obtaining actual measurements of particle density. To overcome these limitations, a Particle Shadow-graph Velocimetry and Size (PSVS) system has been designed to simultaneously obtain particle size and density distributions for a broad range of Hanford tank waste materials existing as both individual particles and agglomerates. The PSVS system uses optical hardware, a temperature-controlled settling column, and particle introduction chamber to accurately and reproducibly obtain images of settling particles. Image analysis software provides a highly accurate determination of both particle terminal velocity and equivalent spherical particle diameter. The particle density is then calculated from Newton's terminal settling theory. The PSVS system was designed to accurately image particle/agglomerate sizes between 10 and 1000 μm and particle/agglomerate densities ranging from 1.4 to 11.5 g/cm{sup 3}, where the maximum terminal velocity does not exceed 10 cm/s. Preliminary testing was completed with standard materials and results were in good agreement with terminal settling theory. Recent results of this method development are presented, as well as experimental design. The primary goal of these PSVS system tests was to obtain accurate and reproducible particle size and velocity measurements to estimate particle densities within 20 percent of direct measured density values. The average percent error observed in particle densities was 4.8, 8.2, and 25.8 percent for S1D3 (high-density soda-lime glass), S3D4 (zirconia), and S1D2 (soda-lime glass) beads, respectively. The maximum measured particle density error observed was 14.5, 21.0, and 58.4, for S1D3, S3D4, and S1D2 beads, respectively. Multiple sources of error can exist that contribute to inaccurate estimates of particle density using the PSVS approach. Two significant influences observed were thermal convective currents in the settling column fluid and non-spherical (irregular) particle shapes in the standard test materials. Experimental results using buoyant beads suggest thermal convective currents can influence the movement of settling particles as much as 4 mm/s. These thermal convective currents are clearly a significant concern for smaller and less-dense particles/agglomerates which have terminal velocities of the same magnitude. Significant effort went into the design and fabrication of a thermal control system for the PSVS settling column. However, small temperature variations (<0.3 deg. C) are difficult to prevent and measure accurately. Therefore, although designing the thermal control system was necessary, it is not considered the only solution to minimize error due to thermal convective currents. The use of small diameter (10 to 27 μm) polyethylene buoyant beads (in low concentrations) during actual settling experiments may be necessary to provide insight into particle-particle interactions and fluid velocity correction factors to account for potential influences from thermal convective currents. Future testing will incorporate the buoyant beads into the analysis technique when the suspension fluid is chemically compatible. The use of the Newton's law to calculate particle/agglomerate densities assumes spherical particle shapes. As the actual particle/agglomerates diverge from spherical, the margin of error increases. The selection of high quality (in density and shape) monodispersed particle standards was a direct attempt to reduce the uncertainties associated with non-spherical or irregular particles and to only observe the PSVS method and analysis error. While investigating the source of data scatter for the S1D3 bead (nominal 700 μm) standard, significant irregular particles where discovered. Yet, a subsequent investigation into the S3D4 bead standard was also conducted and it was determined that 60 percent of the particles had a 0.9 to 0.8 centricity, 32 percent were between 0.8 and 0.7, only 7 percent were between 1.0 and 0.9, and the remaining 1 percent of the particles had centricities between 0.7 and 0.6. Contrast this with the S1D3 bead standard, where 100 percent of particles had centricities between 0.95 and 0.98, upon applying the centricity filter. The influence of the non-spherical shape of the S3D4 bead standard is evident when comparing a 3.9 percent average density error for S1D3 glass bead standard with an 8.3 percent average density error for the S3D4 bead standard. Model corrections for non-spherical shape must be implemented to account for these measurement errors during future method validation and system performance assessments. In addition, further work is needed to resolve the higher than expected velocities for the smaller S1D2 particles. Initial measurements conducted with buoyant beads as fluid velocity tracers indicate that fluid velocities can be subtracted from the increased particle velocities to determine the particle terminal velocity, regardless of the surrounding fluid velocity. However, this approach is in its infancy and will need to be carefully and methodically validated. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Measurements of dihadron correlations relative to the event plane in Au+Au collisions at $\sqrt{s_{NN}} =200$ GeV*

Dihadron azimuthal correlations containing a high transverse momentum ($ p_{T} $) trigger particle are sensitive to the properties of the nuclear medium created at RHIC through the strong interactions occurring between the traversing parton and the medium, i.e. jet-quenching. Previous measurements revealed a strong modification to dihadron azimuthal correlations in Au+Au collisions with respect to p+p and d+Au collisions. The modification increases with the collision centrality, suggesting a path-length or energy density dependence to the jet-quenching effect. This paper reports STAR measurements of dihadron azimuthal correlations in mid-central (20%-60%) Au+Au collisions at $ \sqrt{s_{\rm{NN}}} = 200 $ GeV as a function of the trigger particle's azimuthal angle relative to the event plane, $ \phi_{s} = | \phi_{t}- \psi_{{\rm{EP}}}| $. The azimuthal correlation is studied as a function of both the trigger and associated particle $ p_{T} $. The subtractions of the combinatorial background and anisotropic flow, assuming Zero Yield At Minimum (ZYAM), are described. The correlation results are first discussed with subtraction of the even harmonic (elliptic and quadrangular) flow backgrounds. The away-side correlation is strongly modified, and the modification varies with $ \phi_{s} $, with a double-peak structure for out-of-plane trigger particles. The near-side ridge (long range pseudo-rapidity $ \Delta\eta $ correlation) appears to drop with increasing $ \phi_{s} $ while the jet-like component remains approximately constant. The correlation functions are further studied with the subtraction of odd harmonic triangular flow background arising from fluctuations. It is found that the triangular flow, while responsible for the majority of the amplitudes, is not sufficient to explain the $ \phi_{s} $-dependence of the ridge or the away-side double-peak structure. The dropping ridge with $ \phi_{s} $ could be attributed to a $ \phi_{s} $-dependent elliptic anisotropy; however, the physics mechanism of the ridge remains an open question. Even with a $ \phi_{s} $-dependent elliptic flow, the away-side correlation structure is robust. These results, with extensive systematic studies of the dihadron correlations as a function of $ \phi_{s} $, trigger and associated particle $ p_{T} $, and the pseudo-rapidity range $ \Delta\eta $, should provide stringent inputs to help understand the underlying physics mechanisms of jet-medium interactions in high energy nuclear collisions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of triangular flow on di-hadron azimuthal correlations in relativistic heavy ion collisions

Using the AMPT model for relativistic heavy ion collisions, we have studied the di-hadron azimuthal angular correlations triggered by emitted jets in Au+Au collisions at center-of-mass energy {radical}(s{sub NN})=200 GeV and impact parameter b=8 fm. A double-peak structure for the associated particles at the away side of trigger particles is obtained after subtracting background correlations due to the elliptic flow. Both the near-side peak and the away-side double peaks in the azimuthal angular correlations are, however, significantly suppressed (enhanced) in events of small (large) triangular flow or triangularity in the initial collision geometry as a result of fluctuations. After subtraction of background correlations due to the triangular flow, the away-side double peaks change into a single peak with broad shoulders on both sides. The away side of the di-hadron correlations becomes essentially a single peak after further subtraction of higher-order flows.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Mechanical environmental transport of actinides and ¹³⁷Cs from an arid radioactive waste disposal site

Particulate transport represents an important mechanism for actinides and fission products at the Earth's surface; soil samples taken in the early 1970's near the Subsurface Disposal Area (SDA) at Idaho National Laboratory (INL) provide a case study for examining the mechanisms and characteristics of actinide transport under arid conditions. Transuranic waste was disposed via shallow land burial at the SDA until shortly after a flooding event that occurred in 1969. In this study we analyze soils collected in the early 1970's for ¹³⁷Cs, ²⁴¹Am, and Pu using a combination of radiometric and mass spectrometric techniques. Two distinct ²⁴⁰Pu/²³⁹Pu isotopic ratios are observed for contamination from the SDA, with values ranging from at least 0.059 to 0.069. ²⁴¹Am concentrations are observed to increase only slightly in 0-4 cm soils over the ~40 year period since soil sampling, contrary to Markham's previous hypothesis that ²⁴¹Pu is principally associated with the 0-4 cm soil fractions (Markham 1978). The lack of statistical difference in ²⁴¹Am/²³⁹⁺²⁴⁰Pu ratios with depth suggests mechanical transport and mixing discrete contaminated particles under arid conditions. Occasional samples beyond the northeastern corner are observed to contain anomalously high Pu concentrations with corresponding low ²⁴⁰Pu/²³⁹Pu atoms ratios, suggesting the occurrence of "hot particles;" application of a background Pu subtraction results in calculated Pu atom ratios for the "hot particles" which are statistically similar to those observed in the northeastern corner. Taken together, our data suggests that flooding resulted in mechanical transport of contaminated particles into the area between the SDA and the flood containment dike in the northeastern corner, following which subsequent contamination spreading resulted from wind transport of discrete particles.

54 ENVIRONMENTAL SCIENCES↗

Measurement of the azimuthal anisotropy of charged particles in sNN=5.36TeV O16+O16 and Ne20+Ne20 collisions with the ATLAS detector

This paper presents the first measurements of the azimuthal anisotropy coefficients , which quantify the -order Fourier modulation of charged-particle azimuthal distributions, for in and collisions recorded with the ATLAS detector at the CERN Large Hadron Collider in 2025. The coefficients are measured as a function of transverse momentum ( ), collision centrality, and event multiplicity. They are extracted using two complementary methods: two-particle correlations with a template-fit subtraction of short-range nonflow contributions, and four-particle subevent cumulants, which intrinsically suppress nonflow effects and provide sensitivity to flow fluctuations. The results show a clear hierarchy and a nonmonotonic dependence on , reaching a maximum around , consistent with trends observed in heavy-ion collisions. Detailed comparisons between the two collision systems reveal an enhanced in central collisions, consistent with theory expectations based on the predicted prolate deformation of neon nuclei, in contrast to the slightly tetrahedral structure predicted for oxygen. The four-particle cumulant results highlight strong event-by-event fluctuations and provide the greatest sensitivity to nuclear shape effects. These measurements can place new constraints on the initial geometry and the hydrodynamic response in light-ion collisions, offering valuable input for models of nuclear structure.

Aad, G↗

The interstellar gas experiment

The Interstellar Gas Experiment (IGE) exposed thin metallic foils to collect neutral interstellar gas particles. These particles penetrate the solar system due to their motion relative to the sun. Thus, it is possible to entrap them in the collecting foils along with precipitating magnetospheric and perhaps some ambient atmospheric particles. For the entire duration of the Long Duration Exposure Facility (LDEF) mission, seven of these foils collected particles arriving from seven different directions as seen from the spacecraft. In the mass spectroscopic analysis of the noble gas component of these particles, we have detected the isotopes of He-3, He-4, Ne-20, and Ne-22. In the foil analyses carried out so far, we find a distribution of particle arrival directions which shows that a significant part of the trapped particles are indeed interstellar atoms. The analysis needed to subtract the competing fluxes of magnetospheric and atmospheric particles is still in progress.

Lind, D. L.↗

Experimental technique to investigate the interstellar gas - Preliminary analysis

The Interstellar Gas Experiment (IGE) exposed thin metallic foils to collect neutral interstellar gas particles. These particles penetrate the solar system due to their motion relative to the sun. Thus, it was possible to entrap them in the collecting foils along with precipitating magnetospheric and perhaps some ambient atmospheric particles. For the entire duration of the Long Duration Exposure Facility mission, seven of these foils collected particles arriving from seven different directions as seen from the spacecraft. In the mass spectrometric analysis of the noble gas component of these particles, we have detected the isotopes of He-3, He-4, Ne-20, and Ne-22. In the foil analyses carried out so far, we find a distribution of particle arrival directions which shows that a significant part of the trapped particles are indeed interstellar atoms. The analysis needed to subtract the competing fluxes of magnetospheric and atmospheric particles is still in progress.

Lind, D. L.↗

Measurement of the azimuthal anisotropy of charged particles in $\sqrt{s_{\mathrm{NN}}}=5.36$ TeV $^{16}$O$+^{16}$O and $^{20}$Ne$+^{20}$Ne collisions with the ATLAS detector

This paper presents the first measurements of the azimuthal anisotropy coefficients $v_{n}$, which quantify the $n^{\mathrm{th}}$-order Fourier modulation of charged-particle azimuthal distributions, for $n=2$-4 in $\sqrt{s_{\mathrm{NN}}}=5.36$ TeV $\mathrm{^{16}O}+\mathrm{^{16}O}$ and $\mathrm{^{20}Ne}+\mathrm{^{20}Ne}$ collisions recorded with the ATLAS detector at the Large Hadron Collider in 2025. The $v_{n}$ coefficients are measured as a function of transverse momentum ($p_{\mathrm{T}}$), collision centrality, and event multiplicity. They are extracted using two complementary methods: two-particle correlations with a template-fit subtraction of short-range non-flow contributions, and four-particle subevent cumulants, which intrinsically suppress non-flow effects and provide sensitivity to flow fluctuations. The results show a clear hierarchy $v_{2} > v_{3} > v_{4}$ and a non-monotonic dependence on $p_{\mathrm{T}}$, reaching a maximum around 2 GeV, consistent with trends observed in heavy-ion collisions. Detailed comparisons between the two collision systems reveal an enhanced $v_{2}$ in central $\mathrm{^{20}Ne}+\mathrm{^{20}Ne}$ collisions, consistent with theory expectations based on the predicted prolate deformation of neon nuclei, in contrast to the slightly tetrahedral structure predicted for oxygen. The four-particle cumulant results highlight strong event-by-event fluctuations and provide the greatest sensitivity to nuclear shape effects. These measurements can place new constraints on the initial geometry and the hydrodynamic response in light-ion collisions, offering valuable input for models of nuclear structure.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

First observation of strange baryon enhancement with effective energy in pp collisions at the LHC

The production of (multi-)strange hadrons is measured at midrapidity in proton-proton collisions at $\sqrt{s}$ = 13 TeV as a function of the local charged-particle multiplicity in the pseudorapidity interval |η| < 0.5 and of the very-forward energy measured by the ALICE Zero-Degree Calorimeters. The latter provides information on the effective energy, i.e. the energy available for particle production in the collision once subtracted from the centre-of-mass energy. The yields of K$^{0}_{s}$, $Λ$ + $\overline{Λ}$, and $Ξ$ – + $\overline{Ξ}$ + per charged-particle increase with the effective energy. In addition, this work exploits a multi-differential approach to decouple the roles of local multiplicity and effective energy in such an enhancement. The results presented in this article provide new insights into the interplay between global properties of the collision, such as the initial available energy in the event, and the locally produced final hadronic state, connected to the charged-particle multiplicity at midrapidity. Notably, a strong increase of strange baryon production with effective energy is observed for fixed charged-particle multiplicity at midrapidity. These results are discussed within the context of existing phenomenological models of hadronisation implemented in different tunes of the PYTHIA 8 event generator.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Global and Seasonal Aerosol Optical Depths Derived From Ultraviolet Observations by Satellites (TOMS)

It has been shown that absorbing aerosols (dust, smoke, volcanic ash) can be detected in the ultraviolet wavelengths (331 nm to 380 nm) from satellite observations (TOMS, Total Ozone Mapping Spectrometer) over both land and water. The theoretical basis for these observations and their conversions to optical depths is discussed in terms of an aerosol index AI or N-value residue (assigned positive for absorbing aerosols). The theoretical considerations show that negative values of the AI frequently represent the presence of non-absorbing aerosols (NA) in the troposphere (mostly pollution in the form of sulfates, hydrocarbons, etc., and some natural sulfate aerosols) with particle sizes near 0.1 to 0.2 microns or less. The detection of small-particle non-absorbing aerosols from the measured backscattered radiances is based on the observed wavelength dependence from Mie scattering after the background Rayleigh scattering is subtracted. The Mie scattering from larger particles, 1 micron or more (e.g., cloud water droplets) has too small a wavelength dependence to be detected by this method. In regions that are mostly cloud free, aerosols of all sizes can be seen in the single channel 380 nm or 360 nm radiance data. The most prominent Al feature observed is the strong asymmetry in aerosol amount between the Northern and Southern Hemispheres, with the large majority of NA occurring above 20degN latitude. The maximum values of non-absorbing aerosols are observed over the eastern U.S. and most of western Europe corresponding to the areas of highest industrial pollution. Annual cycles in the amount of NA are observed over Europe and North America with maxima occurring in the summer corresponding to times of minimum wind transport. Similarly, the maxima in the winter over the Atlantic Ocean occurs because of wind borne transport from the land. Most regions of the world have the maximum amount of non-absorbing aerosol in the December to January period except for the eastern North America and Europe. Comparisons of the estimated TOMS aerosol optical depths show good agreement in magnitude and seasonal dependence with sun-photometer optical depths obtained at Goddard Space Flight Center (39degN 76.88degW) in the U.S. and in Lille (50.63degN 3.07degE) in France. The study of these aerosols is important for detecting the sources of industrial pollution and its redistribution by winds on a global basis, as well as its effect on reducing the UV irradiance at the Earth's surface.

Herman, J. R.↗

Evidence for Natural Variability in Marine Stratocumulus Cloud Properties Due to Cloud-Aerosol

In this study, aircraft observations from the Interdisciplinary Remotely-Piloted Aircraft Studies (CIRPAS) Twin Otter are used to characterize the variability in drizzle, cloud, and aerosol properties associated with cloud rifts and the surrounding solid clouds observed off the coast of California. A flight made on 16 July 1999 provided measurements directly across an interface between solid and rift cloud conditions. Aircraft instrumentation allowed for measurements of aerosol, cloud droplet, and drizzle spectra. CCN concentrations were measured in addition to standard thermodynamic variables and the winds. A Forward Scatter Spectrometer Probe (FSSP) measured size distribution of cloud-sized droplets. A Cloud Imaging Probe (CIP) was used to measure distributions of drizzle-sized droplets. Aerosol distributions were obtained from a Cloud Aerosol Scatterprobe (CAS). The CAS probe measured aerosols, cloud droplets and drizzle-sized drops; for this study. The CAS probe was used to measure aerosols in the size range of 0.5 micron - 1 micron. Smaller aerosols were characterized using an Ultrafine Condensation Particle Counter (CPC) sensor. The CPC was used to measure particles with diameters greater than 0.003 micron. By subtracting different count concentrations measured with the CPC, this probe was capable of identifying ultrafine particles those falling in the size range of 3 nanometers - 7 nanometers that are believed to be associated with new particle production.

Albrecht, Bruce↗

Symmetric Phase-Only Filtering in Particle-Image Velocimetry

Symmetrical phase-only filtering (SPOF) can be exploited to obtain substantial improvements in the results of data processing in particle-image velocimetry (PIV). In comparison with traditional PIV data processing, SPOF PIV data processing yields narrower and larger amplitude correlation peaks, thereby providing more-accurate velocity estimates. The higher signal-to-noise ratios associated with the higher amplitude correlation peaks afford greater robustness and reliability of processing. SPOF also affords superior performance in the presence of surface flare light and/or background light. SPOF algorithms can readily be incorporated into pre-existing algorithms used to process digitized image data in PIV, without significantly increasing processing times. A summary of PIV and traditional PIV data processing is prerequisite to a meaningful description of SPOF PIV processing. In PIV, a pulsed laser is used to illuminate a substantially planar region of a flowing fluid in which particles are entrained. An electronic camera records digital images of the particles at two instants of time. The components of velocity of the fluid in the illuminated plane can be obtained by determining the displacements of particles between the two illumination pulses. The objective in PIV data processing is to compute the particle displacements from the digital image data. In traditional PIV data processing, to which the present innovation applies, the two images are divided into a grid of subregions and the displacements determined from cross-correlations between the corresponding sub-regions in the first and second images. The cross-correlation process begins with the calculation of the Fourier transforms (or fast Fourier transforms) of the subregion portions of the images. The Fourier transforms from the corresponding subregions are multiplied, and this product is inverse Fourier transformed, yielding the cross-correlation intensity distribution. The average displacement of the particles across a subregion results in a displacement of the correlation peak from the center of the correlation plane. The velocity is then computed from the displacement of the correlation peak and the time between the recording of the two images. The process as described thus far is performed for all the subregions. The resulting set of velocities in grid cells amounts to a velocity vector map of the flow field recorded on the image plane. In traditional PIV processing, surface flare light and bright background light give rise to a large, broad correlation peak, at the center of the correlation plane, that can overwhelm the true particle- displacement correlation peak. This has made it necessary to resort to tedious image-masking and background-subtraction procedures to recover the relatively small amplitude particle-displacement correlation peak. SPOF is a variant of phase-only filtering (POF), which, in turn, is a variant of matched spatial filtering (MSF). In MSF, one projects a first image (denoted the input image) onto a second image (denoted the filter) as part of a computation to determine how much and what part of the filter is present in the input image. MSF is equivalent to cross-correlation. In POF, the frequency-domain content of the MSF filter is modified to produce a unitamplitude (phase-only) object. POF is implemented by normalizing the Fourier transform of the filter by its magnitude. The advantage of POFs is that they yield correlation peaks that are sharper and have higher signal-to-noise ratios than those obtained through traditional MSF. In the SPOF, these benefits of POF can be extended to PIV data processing. The SPOF yields even better performance than the POF approach, which is uniquely applicable to PIV type image data. In SPOF as now applied to PIV data processing, a subregion of the first image is treated as the input image and the corresponding subregion of the second image is treated as the filter. The Fourier transforms from both the firs and second- image subregions are normalized by the square roots of their respective magnitudes. This scheme yields optimal performance because the amounts of normalization applied to the spatial-frequency contents of the input and filter scenes are just enough to enhance their high-spatial-frequency contents while reducing their spurious low-spatial-frequency content. As a result, in SPOF PIV processing, particle-displacement correlation peaks can readily be detected above spurious background peaks, without need for masking or background subtraction.

Wemet, Mark P.↗