Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “oriented”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Variations of ionization potential and electron affinity as a function of surface orientation: The case of orthorhombic SnS

We investigated the dependence of absolute SnS band-edge energies on surface orientation using density functional theory and GW method for all surfaces with Miller indices $-3 ≤ h,k,l ≤ 3$ and found variations as large as 0.9 eV as a function of ($hkl$). Variations of this magnitude may affect significantly the performance of photovoltaic devices based on polycrystalline SnS thin-films and, in particular, may contribute to the relatively low measured open circuit voltage of SnS solar cells. X-ray diffraction measurements confirm that our thermally evaporated SnS films exhibit a wide distribution of different grain orientations, and the results of Kelvin force microscopy support the theoretically predicted variations of the absolute band-edge energies.

36 MATERIALS SCIENCE↗

Epitaxial c-axis oriented BaTiO{sub 3} thin films on SrTiO{sub 3}-buffered Si(001) by atomic layer deposition

Atomic layer deposition (ALD) of epitaxial c-axis oriented BaTiO{sub 3} (BTO) on Si(001) using a thin (1.6 nm) buffer layer of SrTiO{sub 3} (STO) grown by molecular beam epitaxy is reported. The ALD growth of crystalline BTO films at 225 °C used barium bis(triisopropylcyclopentadienyl), titanium tetraisopropoxide, and water as co-reactants. X-ray diffraction (XRD) reveals a high degree of crystallinity and c-axis orientation of as-deposited BTO films. Crystallinity is improved after vacuum annealing at 600 °C. Two-dimensional XRD confirms the tetragonal structure and orientation of 7–20-nm thick films. The effect of the annealing process on the BTO structure is discussed. A clean STO/Si interface is found using in-situ X-ray photoelectron spectroscopy and confirmed by cross-sectional scanning transmission electron microscopy. The capacitance-voltage characteristics of 7–20 nm-thick BTO films are examined and show an effective dielectric constant of ∼660 for the heterostructure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Indium and impurity incorporation in InGaN films on polar, nonpolar, and semipolar GaN orientations grown by ammonia molecular beam epitaxy

The effects of NH{sub 3} flow, group III flux, and substrate growth temperature on indium incorporation and surface morphology have been investigated for bulk InGaN films grown by ammonia molecular beam epitaxy. The incorporation of unintentional impurity elements (H, C, O) in InGaN films was studied as a function of growth temperature for growth on polar (0001) GaN on sapphire templates, nonpolar (1010) bulk GaN, and semipolar (1122), (2021) bulk GaN substrates. Enhanced indium incorporation was observed on both (1010) and (2021) surfaces relative to c-plane, while reduced indium incorporation was observed on (1122) for co-loaded conditions. Indium incorporation was observed to increase with decreasing growth temperature for all planes, while being relatively unaffected by the group III flux rates for a 1:1 Ga:In ratio. Indium incorporation was found to increase at the expense of a decreased growth rate for higher ammonia flows; however, smooth surface morphology was consistently observed for growth on semipolar orientations. Increased concentrations of oxygen and hydrogen were observed on semipolar and nonpolar orientations with a clear trend of increased hydrogen incorporation with indium content.

36 MATERIALS SCIENCE↗

Reverse Self-Assembly: (111)-Oriented Gold Crystallization at Alkylthiol Monolayer Templates

It has long been known that thiol-terminated molecules self-assemble as commensurate monolayers on Au(111) surfaces. By spreading floating octadecanethiol monolayers on aqueous solutions of chloroauric acid (HAuCl{sub 4}) and using x rays to reduce the gold ions as well as to probe the structure, we have observed the nucleation of (111)-oriented Au nanoparticles at thiol surfaces. This process may be similar to the formation of biogenic gold by bacteria. The thiol monolayer acts as a 'soft template,' changing its structure as Au crystals form so that there is a {radical}3 x {radical}3 commensurate relationship.

74 ATOMIC AND MOLECULAR PHYSICS↗

Peptide Orientation Affects Selectivity in Ion-Exchange Chromatography

Here we demonstrate that separation of proteolytic peptides, having the same net charge and one basic residue, is affected by their specific orientation toward the stationary phase in ion-exchange chromatography. In electrostatic repulsion-hydrophilic interaction chromatography (ERLIC) with an anion-exchange material, the C-terminus of the peptides is, on average, oriented toward the stationary phase. In cation exchange, the average peptide orientation is the opposite. Data with synthetic peptides, serving as orientation probes, indicate that in tryptic/Lys-C peptides the C-terminal carboxyl group appears to be in a zwitterionic bond with the side chain of the C-terminal Lys/Arg residue. In effect, the side chain is then less basic than the N-terminus, accounting for the specific orientation of tryptic and Lys-C peptides. Analyses of larger sets of peptides, generated from lysates by either Lys-N, Lys-C, or trypsin, reveal that specific peptide orientation affects the ability of harged side chains, such as phosphate residues, to influence retention. Phosphorylated residues that are remote in the sequence from the binding site affect retention less than those that are closer. When a peptide contains multiple charged sites, then orientation is observed to be less rigid and retention tends to be governed by the peptide’s net charge rather than its sequence. These general observations could be of value in confirming a peptide’s identification and, in particular, phosphosite assignments in proteomics analyses. More generally, orientation accounts for the ability of chromatography to separate peptides of the same compositionbut different sequence.

Alpert, Andrew J↗

Structural unit charge density and molecular cation templating effects on orientational geometric isomerism and interlayer spacing in 2-D uranyl sulfates

The new uranyl aqua sulfate compound [({CH_3}{sub 3}N{sub 2}C{sub 3}H{sub 3}{CH_2COOH})(H{sub 3}O)] [(UO{sub 2}){sub 2}(SO{sub 4}){sub 3}(H{sub 2}O)]·1.5H{sub 2}O was synthesized and the crystal structure determined. The two-dimensional uranyl-aqua sulfate compound exhibits a previously reported anionic structural unit topology, but features an interstitial complex incorporating hydronium in the form of a disorder Zundel cation and the cation moiety from the ionic liquid 1-carboxymethyl 3-methylimidazolium bistriflimide [HBetMIm][Tf{sub 2}N], which forms hydrogen bonding dimer pairs. An analysis of similar uranyl sulfate complexes from the literature is conducted to explore the relative importance and role of structure directing factors in alkylammonium charge-balanced two-dimensional uranyl sulfates. A correlation is observed between structural unit charge density and interlayer spacing, with a concomitant direction of structural and orientational geometric isomerism of the anionic structural unit. We discuss the role of synthetic conditions and molecular cation properties in directing structural unit formation through charge density matching and hydrogen bonding.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rapid assessment of crystal orientation in semi-crystalline polymer films using rotational zone annealing and impact of orientation on mechanical properties

Crystal orientation in semi-crystalline polymers tends to enhance their performance, such as increased yield strength and modulus, along the orientation direction. Zone annealing (ZA) orients the crystal lamellae through a sharp temperature gradient that effectively directs the crystal growth, but the sweep rate (V ZA ) of this gradient significantly impacts the extent of crystal orientation. Here in this work, we demonstrate rotational zone annealing (RZA) as an efficient method to elucidate the influence of V ZA on the crystal morphology of thin films in a single experiment using isotactic poly(1-butene), PB-1, as a model semi-crystalline polymer. These RZA results are confirmed using standard, serial linear ZA to tune the structure from an almost unidirectional oriented morphology to weakly oriented spherulites. The overall crystallinity is only modestly changed in comparison to isothermal crystallization (maximum of 55% from ZA vs. 48% for isothermal crystallization). However, the average grain size increases and the spherulites become anisotropic from ZA. Due to these structural changes, the Young's modulus of the oriented films, both parallel and perpendicular to the spherulite orientation direction, is significantly increased by ZA. The modulus does become anisotropic after ZA due to the directionality in the crystal structure, with more than a threefold increase in the modulus parallel to the orientation direction for the highest oriented film in comparison to the modulus from isothermal crystallization. Lastly, RZA enables rapid identification of conditions to maximize orientation of crystals in thin polymer films, which could find utility in determining conditions to improve crystallinity and performance in organic electronics.

36 MATERIALS SCIENCE↗

Spin orientations of the spin-half Ir{sup 4+} ions in Sr{sub 3}NiIrO{sub 6}, Sr{sub 2}IrO{sub 4}, and Na{sub 2}IrO{sub 3}: Density functional, perturbation theory, and Madelung potential analyses

The spins of the low-spin Ir{sup 4+} (S = 1/2, d{sup 5}) ions at the octahedral sites of the oxides Sr{sub 3}NiIrO{sub 6}, Sr{sub 2}IrO{sub 4}, and Na{sub 2}IrO{sub 3} exhibit preferred orientations with respect to their IrO{sub 6} octahedra. We evaluated the magnetic anisotropies of these S = 1/2 ions on the basis of density functional theory (DFT) calculations including spin-orbit coupling (SOC), and probed their origin by performing perturbation theory analyses with SOC as perturbation within the LS coupling scheme. The observed spin orientations of Sr{sub 3}NiIrO{sub 6} and Sr{sub 2}IrO{sub 4} are correctly predicted by DFT calculations, and are accounted for by the perturbation theory analysis. As for the spin orientation of Na{sub 2}IrO{sub 3}, both experimental studies and DFT calculations have not been unequivocal. Our analysis reveals that the Ir{sup 4+} spin orientation of Na{sub 2}IrO{sub 3} should have nonzero components along the c- and a-axis directions. The spin orientations determined by DFT calculations are sensitive to the accuracy of the crystal structures employed, which is explained by perturbation theory analyses when interactions between adjacent Ir{sup 4+} ions are taken into consideration. There are indications implying that the 5d electrons of Na{sub 2}IrO{sub 3} are less strongly localized compared with those of Sr{sub 3}NiIrO{sub 6} and Sr{sub 2}IrO{sub 4}. This implication was confirmed by showing that the Madelung potentials of the Ir{sup 4+} ions are less negative in Na{sub 2}IrO{sub 3} than in Sr{sub 3}NiIrO{sub 6} and Sr{sub 2}IrO{sub 4}. Most transition-metal S = 1/2 ions do have magnetic anisotropies because the SOC induces interactions among their crystal-field split d-states, and the associated mixing of the states modifies only the orbital parts of the states. This finding cannot be mimicked by a spin Hamiltonian because this model Hamiltonian lacks the orbital degree of freedom, thereby leading to the spin-half syndrome. The spin-orbital entanglement for the 5d spin-half ions Ir{sup 4+} is not as strong as has been assumed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal orientation effects on helium ion depth distributions and adatom formation processes in plasma-facing tungsten

We present atomistic simulations that show the effect of surface orientation on helium depth distributions and surface feature formation as a result of low-energy helium plasma exposure. We find a pronounced effect of surface orientation on the initial depth of implanted helium ions, as well as a difference in reflection and helium retention across different surface orientations. Our results indicate that single helium interstitials are sufficient to induce the formation of adatom/substitutional helium pairs under certain highly corrugated tungsten surfaces, such as (1 1 1)-orientations, leading to the formation of a relatively concentrated layer of immobile helium immediately below the surface. The energies involved for helium-induced adatom formation on (1 1 1) and (2 1 1) surfaces are exoergic for even a single adatom very close to the surface, while (0 0 1) and (0 1 1) surfaces require two or even three helium atoms in a cluster before a substitutional helium cluster and adatom will form with reasonable probability. This phenomenon results in much higher initial helium retention during helium plasma exposure to (1 1 1) and (2 1 1) tungsten surfaces than is observed for (0 0 1) or (0 1 1) surfaces and is much higher than can be attributed to differences in the initial depth distributions alone. The layer thus formed may serve as nucleation sites for further bubble formation and growth or as a source of material embrittlement or fatigue, which may have implications for the formation of tungsten “fuzz” in plasma-facing divertors for magnetic-confinement nuclear fusion reactors and/or the lifetime of such divertors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Rapid, all-optical crystal orientation imaging of two-dimensional transition metal dichalcogenide monolayers

Two-dimensional (2D) atomic materials such as graphene and transition metal dichalcogenides (TMDCs) have attracted significant research and industrial interest for their electronic, optical, mechanical, and thermal properties. While large-area crystal growth techniques such as chemical vapor deposition have been demonstrated, the presence of grain boundaries and orientation of grains arising in such growths substantially affect the physical properties of the materials. There is currently no scalable characterization method for determining these boundaries and orientations over a large sample area. We here present a second-harmonic generation based microscopy technique for rapidly mapping grain orientations and boundaries of 2D TMDCs. We experimentally demonstrate the capability to map large samples to an angular resolution of ±1° with minimal sample preparation and without involved analysis. A direct comparison of the all-optical grain orientation maps against results obtained by diffraction-filtered dark-field transmission electron microscopy plus selected-area electron diffraction on identical TMDC samples is provided. This rapid and accurate tool should enable large-area characterization of TMDC samples for expedited studies of grain boundary effects and the efficient characterization of industrial-scale production techniques.

36 MATERIALS SCIENCE↗

Characterization of the crystal orientation in mono-oriented films of HDPE/LLDPE blends by IR dichroism

Polyethylene films are a common packaging material. The level and type of chain orientation in these films are a very important property which is of great care and concern of the converter personnel during the conformation process. Usually bi-orientation is the conventional procedure but when easy tear in one direction is needed mono-orientation is sought. This paper deal with the characterization of the crystalline orientation in films of polyethylene blends (HDPE/LLDPE) which have being oriented in two steps: initially the polymer was bi-oriented via extrusion-blown, cooled, and then in a second process hot stretched along the machine direction in order to produce mono-oriented films. In order to evaluate the orientation of the film, the polarization of the FT-IR beam was rotated 360° in steps of 5° by rotating the polarizer. In each step the absorbance spectrum was recorded and the corresponding dichroic ratio (DR) calculated after subtracting the baseline. With differential scanning calorimetry (DSC) was possible to infer about the changes in the morphology caused by the stretching.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Controlling Nanoparticle Orientations in the Self-Assembly of ‘Patchy’ Quantum Dot-Gold Heterostructural Nanocrystals

Self-assembly of nanocrystals is a promising route for creating macroscale materials that derive function from the properties of their nanoscale building blocks. While much progress has been made assembling nanocrystals into different superlattices, controlling the relative orientations of nanocrystals in those lattices remains a challenge. Here, we combine experiments with computer simulations to study the self-assembly of patchy heterostructural nanocrystals (HNCs), consisting of near-spherical quantum dots decorated with regular arrangements of small gold satellites, into close-packed superlattices with pronounced orientational alignment of HNCs. Our simulations indicate that the orientational alignment is caused by van der Waals interactions between gold patches and is sensitive to the interparticle distance in the superlattice. We demonstrate experimentally that the degree and type of orientational alignment can be controlled by changing ligand populations on HNCs. This study provides guidance for the design and fabrication of nanocrystal superlattices with enhanced structural control.

ZHu, Hua↗

Characteristic orientation relationships in nanoscale Al-Al2Cu Eutectic

Highlights: • Nano-scale lamellar Al-Al{sub 2}Cu eutectic was synthesized by laser surface remelting. • Orientation relationship (OR) is {211}{sub Al2Cu}||{111}{sub Al} and <120>{sub Al2Cu}||<110>{sub Al.} • The OR has two variants, I has (001){sub Al2Cu}||{001}{sub Al} and II has (001){sub Al2Cu}||{111}{sub Al.} • Variant I is associated with low energy interfaces. - Abstract: A fully lamellar Al-Al{sub 2}Cu eutectic comprising alternate nano-scale α-Al and θ-Al{sub 2}Cu phases was synthesized through laser surface remelting of a cast Al-32.7 wt% Cu alloy. The orientation relationship between α-Al and θ-Al{sub 2}Cu phases was investigated from Kikuchi patterns obtained using electron backscattered diffraction (EBSD) and t-EBSD techniques. The characteristic orientation relationship (OR), {211}{sub Al2Cu}||{111}{sub Al} and <120>{sub Al2Cu}||<110>{sub Al}, was observed independent of interlamellar spacing. This OR has two variants where, besides the two parallel planes, the variant I exhibits (001){sub Al2Cu}||{001}{sub Al} and the variant II exhibits (001){sub Al2Cu}||{111}{sub Al}. Variant I prevails over variant II in laser-processed α-Al and θ-Al{sub 2}Cu nano-laminates, and atomistic modeling indicates that this is due to the low energy interfaces associated with variant I, i.e., {211}{sub Al2Cu}||{111}{sub Al} or (001){sub Al2Cu}||{001}{sub Al}. A comprehensive understanding of the crystallographic orientation relationships between two phases may help predict or explain the active slip systems in fine-scale Al-Al{sub 2}Cu eutectic and other cubic-tetragonal two-phase materials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Impact of Solution Chemistry and Particle Anistropy on the Collective Dynamics of Oriented Aggregation

Although oriented aggregation of nanoparticles is a widely recognized mechanism of crystal growth, the impact of many fundamental parameters, such as crystallographically distinct interfacial structures, solution composition, and particle-shape-specific hydrodynamic characteristics, on the governing mechanisms and assembly kinetics are largely unexplored. In this context, we investigated the structure and dynamics of boehmite aggregation as a function of solution pH and ionic strength. Cryogenic transmission electron microscopy shows that boehmite platelets assemble by oriented attachment on (010) planes. The coagulation rate constants obtained from dynamic light scattering during the early stages of aggregation are found to span seven orders of magnitude and cross both the reaction-limited and diffusion-limited regimes. Combining a simple scaling with calculations for stability ratio and rotational/translational diffusivities of irregular particle shapes, the effects of orientation for irregular-shaped particles on the early stages of aggregation is understood via angular dependence of van der Waals, electrostatic, and hydrodynamic interactions. Using Monte Carlo simulations, we found that a simple geometric parameter, namely the contact area between two attaching platelets, provides physical insight into the unique structural characteristics of the larger aggregates of the irregular-shaped particles, explaining the unusually high fractal dimensions measured in the diffusion-limited aggregation regime.

oriented aggregation, boehmite, attachment, nanopl↗

The interfacial orientation relationship of oxide nanoparticles in a hafnium-containing oxide dispersion-strengthened austenitic stainless steel

This work reports comprehensive investigations on the orientation relationship of the oxide nanoparticles in a hafnium-containing austenitic oxide dispersion-strengthened 316 stainless steel. The phases of the oxide nanoparticles were determined by a combination of scanning transmission electron microscopy–electron dispersive X-ray spectroscopy, atom probe tomography and synchrotron X-ray diffraction to be complex Y–Ti–Hf–O compounds with similar crystal structures, including bixbyite Y{sub 2}O{sub 3}, fluorite Y{sub 2}O{sub 3}–HfO{sub 2} solid solution and pyrochlore (or fluorite) Y{sub 2}(Ti,Hf){sub 2−x}O{sub 7−x}. High resolution transmission electron microscopy was used to characterize the particle–matrix interfaces. Two different coherency relationships along with one axis-parallel relation between the oxide nanoparticles and the steel matrix were found. The size of the nanoparticles significantly influences the orientation relationship. The results provide insight into the relationship of these nanoparticles with the matrix, which has implications for interpreting material properties as well as responses to radiation. - Highlights: • The oxide nanoparticles in a hafnium-containing austenitic ODS were characterized. • The nanoparticles are Y–Hf–Ti–O enriched phases according to APT and STEM–EDS. • Two coherency and an axis-parallel orientation relationships were found by HR-TEM. • Particle size has a prominent effect on the orientation relationship (OR). • Formation mechanism of the oxide nanoparticles was discussed based on the ORs.

36 MATERIALS SCIENCE↗

Orientational anisotropy in simulated vapor-deposited molecular glasses

Enhanced kinetic stability of vapor-deposited glasses has been established for a variety of glass organic formers. Several recent reports indicate that vapor-deposited glasses can be orientationally anisotropic. In this work, we present results of extensive molecular simulations that mimic a number of features of the experimental vapor deposition process. The simulations are performed on a generic coarse-grained model and an all-atom representation of N,N′-bis(3-methylphenyl)-N,N′-diphenylbenzidine (TPD), a small organic molecule whose vapor-deposited glasses exhibit considerable orientational anisotropy. The coarse-grained model adopted here is found to reproduce several key aspects reported in experiments. In particular, the molecular orientation of vapor-deposited glasses is observed to depend on substrate temperature during deposition. For a fixed deposition rate, the molecular orientation in the glasses changes from isotropic, at the glass transition temperature, T{sub g}, to slightly normal to the substrate at temperatures just below T{sub g}. Well below T{sub g}, molecular orientation becomes predominantly parallel to the substrate. The all-atom model is used to confirm some of the equilibrium structural features of TPD interfaces that arise above the glass transition temperature. We discuss a mechanism based on distinct orientations observed at equilibrium near the surface of the film, which get trapped within the film during the non-equilibrium process of vapor deposition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗