Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “opto-mechanical”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Opto-mechanical subsystem of a 10 micrometer wavelength receiver terminal. Waveguide laser local oscillator. Servo system

An engineering model opto-mechanical subsystem for a 10.6-micrometer laser heterodyne receiver is developed, and a CO2 waveguide local oscillator and servo electronics are provided for the receiver. Design goals are presented for the subsystems and overall package design is described. Thermal and mechanical distortion loading tests were performed and the results are included.

Source record↗
NASA NTRS1977

Opto-mechanical subsystem with temperature compensation through isothemal design

An opto-mechanical subsystem for supporting a laser structure which minimizes changes in the alignment of the laser optics in response to temperature variations is described. Both optical and mechanical structural components of the system are formed of the same material, preferably beryllium, which is selected for high mechanical strength and good thermal conducting qualities. All mechanical and optical components are mounted and assembled to provide thorough thermal coupling throughout the subsystem to prevent the development of temperature gradients.

Goodwin, F. E.↗
NASA NTRS1999

Preliminary Opto-Mechanical Design for the X2000 Transceiver

Preliminary Optical design and mechanical conceptual design for a 30 cm aperture transceiver are described. A common aperture is used for both transmit and receive. Special attention was given to off-axis and scattered light rejection and isolation of the receive channel from the transmit channel.

Laser-communication↗
NASA NTRS1992

Linear analysis of opto-mechanical systems

A general framework is presented for the matrix-form, linear optical model analysis of controlled optomechanical systems; the models are conjoined with linear models of structures and controls to compute system performance as a function of optics, structures, and control parameters. Covariance analysis, optimization, and estimation/simulation are used. Attention is given to a tolerancing example for the Hubble Space Telescope's Wide Field and Planetary Camera, which involves the creation of a linear model of residual pupil shear.

Redding, David C.↗
NASA NTRS1995

Ultra-high, resolution, modular optical angle encoder for space-based opto-mechanical applications

A 27-bit optical encoder using a novel patent pending technology has been developed by the MicroE Development Center of BEI Sensors & Systems Company and tested by the Sensor Systems Group (SSG) Inc., in a positioning and stabilization mirror assembly (PSMA) designed and constructed under a grant from the Marshall Space Flight Center. Test results verified performance within the specifications of the PSMA.

Luther, Holger↗
NASA NTRS2000

Preliminary Opto-Mechanical Design for the X2000 Transceiver

Preliminary optical design and mechanical conceptual design for a 30 cm aperture transceiver are described. A common aperture is used for both transmit and receive. Special attention was given to off-axis and scattered light rejection and isolation of the receive channel from the transmit channel. Requirements, details of the design and preliminary performance analysis of the transceiver are provided.

Hemmati, H.↗
NASA NTRS2002

Scientific Goals and Opto-Mechanical Challenges of the Next Generation Space Telescope (NGST)

The Next Generation Space Telescope will push the boundaries of astronomy far beyond anything, possible with an Earth-bound observatory, or even with the Hubble Space Telescope. I will outline the scientific objectives of the NGST and show how they fit into the NASA strategic plan for space astronomy. The NGST will not be the end of the line, and adaptive and active structures will enable even more powerful space observatories, capable of seeing even closer to the dawn of time, and of measuring the light from planets around other stars.

Mather, John C.↗
NASA NTRS1996

Integrated Modeling Methodology Validation Using the Micro-Precision Interferometer Testbed

This paper validates the integrated modeling methodology used for design and performance evaluation of complex opto-mechanical systems, particularly spaceborne interferometers. The methodology integrates structural modeling, optical modeling, and control system design into a common environment, the Integrated Modeling of Optical Systems (IMOS) software package.

opto-mechanical↗
NASA NTRS1972

Mariner Mars 1971 photogrammetric calibrations.

One of the major objectives of the Mariner Mars 1971 mission was the systematic mapping of Mars. This required a complex and thorough photogrammetric calibration of both the wide-angle and narrow-angle cameras mounted on the spacecraft scan platform. Because of the peculiarities of the TV imaging techniques (transmission quality, low resolution, electronic distortion, etc.), combined with the extremely small vidicon format, many unique difficulties were encountered and many unprecedented problems had to be solved. Their successful solution, based on experience gained during the Surveyor and Mariner Mars 1969 projects, is discussed, and the calibration procedure for the parameters of interior orientation, as well as for opto-mechanical orthogonality, is described in detail.

Benesh, M.↗
NASA NTRS1980

Thermal IR imaging system using a self-scanned HgCdTe/CCD detector array

It is likely that future high resolution earth observation imaging systems will utilize self-scanned IR detectors. In an initial step toward this goal, an IR imaging system operating in the 10 to 12 micron spectral region has been developed. This system uses a 9-element HgCdTe/CCD linear array operating in the photoconductive mode, nine pre-amplifiers and a silicon CCD multiplexer integrated into a focal plane assembly. Opto-mechanical techniques are used to scan the scene and images are produced in real time. The imaging performance of this system is described and measurements of noise, responsivity, specific detectivity, and detector sensitivity profiles are presented. The requirements for more advanced detector arrays for use in future NASA remote sensing missions are also discussed.

Husain-Abidi, A. S.↗
NASA NTRS1982

Design trade-offs for a multispectral linear array (MLA) instrument

The NASA Landsat program with imagery produced by the Multispectral Scanner has been thoroughly successful. The second generation of Landsat is represented by the Thematic Mapper, while the MLA sensor belongs to a third generation. It is pointed out that the strength of the MLA concept emanates from the pushbroom image-formation approach, which offers some fundamental improvements over opto-mechanically scanned instruments. The increased dwell time of the MLA sensor can be employed to improve signal-to-noise, spectral resolution, and spatial resolution simultaneously. Problems regarding design tradeoffs are considered, taking into account instrument sizing, configuration tradeoffs, optical design tradeoffs, aspects of spectral separation and registration, and radiometric accuracy and calibration tradeoffs. A description is provided of the instrument concept to which the design tradeoffs have led.

Mika, A. M.↗
NASA NTRS1993

Development of a 9.3 micrometer CW LIDAR for the study of atmospheric aerosol

This report provides a brief summary of the basic requirements to obtain coherent or heterodyne mixing of the optical radiation backscattered by atmospheric aerosols with that from a fixed frequency source. The continuous wave (CW) mode of operation for a coherent lidar is reviewed along with the associated lidar transfer equation. A complete optical design of the three major subsystems of a CW, coherent lidar is given. Lens design software is implemented to model and optimize receiver performance. Techniques for the opto-mechanical assembly and some of the critical tolerances of the coherent lidar are provided along with preliminary tests of the subsystems. Included in these tests is a comparison of the experimental and the theoretical average power signal-to-noise ratio. The analog to digital software used to evaluate the power spectrum of the backscattered signal is presented in the Appendix of this report.

Whiteside, B. N.↗
NASA NTRS1995

Stellar Interferometer Technology Experiment (SITE)

The MIT Space Engineering Research Center and the Jet Propulsion Laboratory stand ready to advance science sensor technology for discrete-aperture astronomical instruments such as space-based optical interferometers. The objective of the Stellar Interferometer Technology Experiment (SITE) is to demonstrate system-level functionality of a space-based stellar interferometer through the use of enabling and enhancing Controlled-Structures Technologies (CST). SITE mounts to the Mission Peculiar Experiment Support System inside the Shuttle payload bay. Starlight, entering through two apertures, is steered to a combining plate where it is interferred. Interference requires 27 nanometer pathlength (phasing) and 0.29 archsecond wavefront-tilt (pointing) control. The resulting 15 milli-archsecond angular resolution exceeds that of current earth-orbiting telescopes while maintaining low cost by exploiting active optics and structural control technologies. With these technologies, unforeseen and time-varying disturbances can be rejected while relaxing reliance on ground alignment and calibration. SITE will reduce the risk and cost of advanced optical space systems by validating critical technologies in their operational environment. Moreover, these technologies are directly applicable to commercially driven applications such as precision matching, optical scanning, and vibration and noise control systems for the aerospace, medical, and automotive sectors. The SITE team consists of experienced university, government, and industry researchers, scientists, and engineers with extensive expertise in optical interferometry, nano-precision opto-mechanical control and spaceflight experimentation. The experience exists and the technology is mature. SITE will validate these technologies on a functioning interferometer science sensor in order to confirm definitely their readiness to be baselined for future science missions.

Crawley, Edward F.↗
NASA NTRS1998

Far Ultraviolet and Visible Light Scatter Measurements for CVD Silicon Carbide Mirrors for SOHO

Chemically-vapor-deposited (CVD) silicon carbide (SiC) has become a popular mirror material for spaceborne solar instrumentation for the vacuum ultraviolet wavelength range due to its appreciable broadband reflectance and favorable thermal and opto-mechanical properties. Scatter from surfaces of mirrors operating in this wavelength range can destroy otherwise good image contrast especially for extended targets such as the sun. While visible light scatter measurements are relatively easy to conduct, far ultraviolet (FUV) scatter measurements are not so easy. Visible light (633 nm) scatter measurements were performed on CVD SiC telescope mirrors (from the same vendor) for two instruments on the Solar and Heliospheric Observatory (SOHO) -- Ultraviolet Coronagraph Spectrometer (UVCS) and Solar Ultraviolet Measurement of Emitted Radiation (SUMER). Additionally, extensive FUV scatter measurements were made for SUMER telescope mirrors. We attempt to correlate the results for those visible light scatter measurements and to explore the usefulness of visible scatter measurements to predictions of FUV scatter for this important material.

Leviton, Douglas B.↗
NASA NTRS1999

Integrated Modeling Tools for Thermal Analysis and Applications

Integrated modeling of spacecraft systems is a rapidly evolving area in which multidisciplinary models are developed to design and analyze spacecraft configurations. These models are especially important in the early design stages where rapid trades between subsystems can substantially impact design decisions. Integrated modeling is one of the cornerstones of two of NASA's planned missions in the Origins Program -- the Next Generation Space Telescope (NGST) and the Space Interferometry Mission (SIM). Common modeling tools for control design and opto-mechanical analysis have recently emerged and are becoming increasingly widely used. A discipline that has been somewhat less integrated, but is nevertheless of critical concern for high precision optical instruments, is thermal analysis and design. A major factor contributing to this mild estrangement is that the modeling philosophies and objectives for structural and thermal systems typically do not coincide. Consequently the tools that are used in these discplines suffer a degree of incompatibility, each having developed along their own evolutionary path. Although standard thermal tools have worked relatively well in the past. integration with other disciplines requires revisiting modeling assumptions and solution methods. Over the past several years we have been developing a MATLAB based integrated modeling tool called IMOS (Integrated Modeling of Optical Systems) which integrates many aspects of structural, optical, control and dynamical analysis disciplines. Recent efforts have included developing a thermal modeling and analysis capability, which is the subject of this article. Currently, the IMOS thermal suite contains steady state and transient heat equation solvers, and the ability to set up the linear conduction network from an IMOS finite element model. The IMOS code generates linear conduction elements associated with plates and beams/rods of the thermal network directly from the finite element structural model. Conductances for temperature varying materials are accommodated. This capability both streamlines the process of developing the thermal model from the finite element model, and also makes the structural and thermal models compatible in the sense that each structural node is associated with a thermal node. This is particularly useful when the purpose of the analysis is to predict structural deformations due to thermal loads. The steady state solver uses a restricted step size Newton method, and the transient solver is an adaptive step size implicit method applicable to general differential algebraic systems. Temperature dependent conductances and capacitances are accommodated by the solvers. In addition to discussing the modeling and solution methods. applications where the thermal modeling is "in the loop" with sensitivity analysis, optimization and optical performance drawn from our experiences with the Space Interferometry Mission (SIM), and the Next Generation Space Telescope (NGST) are presented.

Milman, Mark H.↗