Optical second harmonic generation in biological systems
Optical second harmonic generation in excised tissues by Q switched ruby laser irradiation, observing narrow band emission line in collagenous tissues
Fine, S.↗
SEARCH · Engineering Papers
Results for “optical second harmonic generation”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Organometallic Salts Generate Optical Second Harmonics
Series of organometallic salts exhibit large second-order dielectric susceptibilities, as evidenced by generation of second harmonics when illuminated at visible and near-infrared wavelengths. Investigations of these and related compounds continue with view toward development of materials for use as optical second-harmonic generators, electro-optical modulators, optical switches, piezoelectric sensors, and parametric crystals.
Marder, Seth R.↗
Compounds Generate Optical Second Harmonics
Newly synthesized organic salts found to generate relatively large second-harmonic signals when illuminated by fundamental signals in near-infrared spectrum. Made by crystallizing, with appropriate counterions, organic ions having large molecular hyperpolarizibilities. Large second-order nonlinear susceptibilities observed. These and other compounds having large nonlinear optical properties used in electro-optical modulators, switches, and signal-processing equipment.
Marder, Seth R.↗
Optical second-harmonic generation in semi- conductor alloys interim report
Optical second harmonic generation in semiconductor alloys
SEMICONDUCTOR↗
Optical second-harmonic generation in zns-cds and cds-cdse alloys
Optical second-harmonic generation in zinc sulfide-cadmium sulfide and cadmium sulfide- cadmium selenide alloys
CADMIUM SELENIDE↗
Optical second-harmonic generation in zns-cds and cds-cdse alloys.
Optical second-harmonic generation in zinc sulfide-cadmium sulfide and cadmium sulfide- cadmium selenide alloys measured as function of composition
HARMONIC GENERATION↗
Diode end pumped laser and harmonic generator using same
A second harmonic, optical generator is disclosed in which a laser diode produces an output pumping beam which is focused by means of a graded, refractive index rod lens into a rod of lasant material, such as Nd:YAG, disposed within an optical resonator to pump the lasant material and to excite the optical resonator at a fundamental wavelength. A non-linear electro-optic material such as MgO:LiNbO.sub.3 is coupled to the excited, fundamental mode of the optical resonator to produce a non-linear interaction with the fundamental wavelength producing a harmonic. In one embodiment, the gain medium and the non-linear material are disposed within an optical resonator defined by a pair of reflectors, one of which is formed on a face of the gain medium and the second of which is formed on a face of the non-linear medium. In another embodiment, the non-linear, electro-optic material is doped with the lasant ion such that the gain medium and the non-linear doubling material are co-extensive in volume. In another embodiment, a non-linear, doubling material is disposed in an optical resonator external of the laser gai medium for improved stability of the second harmonic generation process. In another embodiment, the laser gain medium andthe non-linear material are bonded together by means of an optically transparent cement to form a mechanically stable, monolithic structure. In another embodiment, the non-linear material has reflective faces formed thereon to define a ring resonator to decouple reflections from the non-linear medium back to the gain medium for improved stability.
Byer, Robert L.↗
Synchronous pumping of picosecond dye laser using high efficiency second harmonic generation from optical fibres
The stable operation of a mode-locked dye laser synchronously pumped by the second harmonic of an Nd:YAG laser produced in an Nd codoped germanosilicate optical fiber is reported. The optical fiber preparation technique, which results in a second harmonic conversion efficiency of 2 percent, is described. This optical fiber SHG conversion efficiency is the highest reported to date using a continuous-wave mode-locked laser.
Lawandy, N. M.↗
Piezoelectric Field Enhanced Second-Order Nonlinear Optical Susceptibilities in Wurtzite GaN/AlGaN Quantum Wells
Second-order nonlinear optical processes including second-harmonic generation, optical rectification, and difference-frequency generation associated with intersubband transitions in wurtzite GaN/AlGaN quantum well (QW) are investigated theoretically. Taking into account the strain-induced piezoelectric (PZ) effects, we solve the electronic structure of the QW from coupled effective-mass Schrodinger equation and Poisson equation including the exchange-correlation effect under the local-density approximation. We show that the large PZ field in the QW breaks the symmetry of the confinement potential profile and leads to large second-order susceptibilities. We also show that the interband optical pump-induced electron-hole plasma results in an enhancement in the maximum value of the nonlinear coefficients and a redshift of the peak position in the nonlinear optical spectrum. By use of the difference-frequency generation, THz radiation can be generated from a GaN/Al(0.75)Ga(0.25)N with a pump laser of 1.55 micron.
Liu, Ansheng↗
Absolute and relative nonlinear optical coefficients of KDP, KD(asterisk)P, BaB2O4, LiIO3, MgO:LiNbO3, and KTP measured by phase-matched second-harmonic generation
Both absolute and relative nonlinear optical coefficients of six nonlinear materials measured by second-harmonic generation are discussed. A single-mode, injection-seeded, Q-switched Nd:YAG laser with spatially filtered output was used to generate the 1.064-micron fundamental radiation. The following results were obtained: d36(KDP) = 0.38 pm/V, d36(KD/asterisk/P) = 0.37 pm/V, (parallel)d22(BaB2O4)(parallel) = 2.2 pm/V, d31(LiIO3) = -4.1 pm/V, d31(5 percentMgO:MgO LiNbO3) = -4.7 pm/V, and d(eff)(KTP) = 3.2 pm/V. The accuracy of these measurements is estimated to be better than 10 percent.
Eckardt, Robert C.↗
Space Application Requirements for Organic Avionics
The NASA Marshall Space Flight Center is currently evaluating polymer based components for application in launch vehicle and propulsion system avionics systems. Organic polymers offer great advantages over inorganic corollaries. Unlike inorganics with crystalline structures defining their sensing characteristics, organic polymers can be engineered to provide varying degrees of sensitivity for various parameters including electro-optic response, second harmonic generation, and piezoelectric response. While great advantages in performance can be achieved with organic polymers, survivability in the operational environment is a key aspect for their practical application. The space environment in particular offers challenges that must be considered in the application of polymer based devices. These challenges include: long term thermal stability for long duration missions, extreme thermal cycling, space radiation tolerance, vacuum operation, low power operation, high operational reliability. Requirements for application of polymer based devices in space avionics systems will be presented and discussed in light of current polymer materials.
Watson, Michael D.↗
Solid-state lasers for coherent communication and remote sensing
Laser development, high efficiency, high power second harmonic generation, operation of optical parametric oscillators for wavelength diversity and tunability, and studies in coherent communications are reviewed.
Byer, Robert L.↗
Contamination and Radiation Effects on Nonlinear Crystals for Space Laser Systems
Space Lasers are vital tools for NASA s space missions and military applications. Although, lasers are highly reliable on the ground, several past space laser missions proved to be short-lived and unreliable. In this communication, we are shedding more light on the contamination and radiation issues, which are the most common causes for optical damages and laser failures in space. At first, we will present results based on the study of liquids and subsequently correlate these results to the particulates of the laser system environment. We present a model explaining how the laser beam traps contaminants against the optical surfaces and cause optical damages and the role of gravity in the process. We also report the results of the second harmonic generation efficiency for nonlinear optical crystals irradiated with high-energy beams of protons. In addition, we are proposing to employ the technique of adsorption to minimize the presence of adsorbing molecules present in the laser compartment.
Abdeldayem, Hossain A.↗
Phase matching in second-harmonic generation using artificial periodic structures.
The use of artificial periodic structures, consisting of spatial modulations of the linear and nonlinear susceptibilities of a nonlinear optical medium, to achieve phase matching in second-harmonic generation is analyzed. Dispersion relations and approximate formulas for the second-harmonic fields generated under various conditions are obtained and used to evaluate the experimental situation.
Tang, C. L.↗
Laser system with an antiresonant optical ring
Various applications of an antiresonant ring, consisting of a beam splitter and a number of optical reflectors, are described. With a beam splitter having a transmission coefficient and a reflection coefficient, an optical beam incident on the beam splitter along a first axis is split into two components which circulate around the ring in opposite directions. They are recombined to reflect back the beam along the first axis, with none of the beam power being directed along a second axis. The ring can be part of the cavity of two otherwise independent lasers, with two separate laser mediums external to the ring, or with a multi-wavelength laser medium in the ring. The ring together with a second-harmonic generation crystal and a dispersive phase shifter in the ring can generate the second harmonic of an optical beam.
Siegman, A. E.↗
Intensity correlations in optical nonlinear processes by photon counting techniques
Intensity correlations in optical parametric noise and second harmonic generation measured by two photon delayed coincidence counting
Davidson, F.↗
High energy efficient solid state laser sources
Recent progress in the development of highly efficient coherent optical sources is reviewed. This work focusses on nonlinear frequency conversion of the highly coherent output of the Non-Planar Ring Laser Oscillators developed earlier in the program, and includes high efficiency second harmonic generation and the operation of optical parametric oscillators for wavelength diversity and tunability.
Byer, Robert L.↗
High energy efficient solid state laser sources
Recent progress in the development of highly efficient coherent optical sources was reviewed. This work has focused on nonlinear frequency conversion of the highly coherent output of the non-planar ring laser oscillators developed earlier in the program, and includes high efficiency second harmonic generation and the operation of optical parametric oscillators for wavelength diversity and tunability.
Byer, Robert L.↗