Inspired by strain: Optical materials
Explore the source record for details and available documents.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
Monolayer transition-metal dichalcogenides are novel materials which at low energies constitute a condensed-matter realization of massive relativistic fermions in two dimensions. Here, we show that this picture breaks for optical pumping—instead, the added complexity of a realistic materials description leads to a new mechanism to optically induce topologically protected chiral edge modes, facilitating optically switchable conduction channels that are insensitive to disorder. In contrast to graphene and previously discussed toy models, the underlying mechanism relies on the intrinsic three-band nature of transition-metal dichalcogenide monolayers near the band edges. Photo-induced band inversions scale linearly in applied pump field and exhibit transitions from one to two chiral edge modes on sweeping from red to blue detuning. As a result, we develop an ab initio strategy to understand non-equilibrium Floquet–Bloch bands and topological transitions, and illustrate for WS 2 that control of chiral edge modes can be dictated solely from symmetry principles and is not qualitatively sensitive to microscopic materials details.
Abstract not provided
In former works, the optical material properties of different polymer powders used for Laser Beam Melting (LBM) at room temperature have been analyzed. With a measurement setup using two integration spheres, it was shown that the optical material properties of polymer powders differ significantly due to multiple reflections within the powder compared to solid bodies of the same material. Additionally, the absorption behavior of the single particles shows an important influence on the overall optical material properties, especially the reflectance of the powder bed. Now the setup is modified to allow measurements at higher temperatures. Because crystalline areas of semi-crystalline thermoplastics are mainly responsible for the absorption of the laser radiation, the influence of the temperature increase on the overall optical material properties is analyzed. As material, conventional polyamide 12 and polypropylene as new polymer powder material, is used. By comparing results at room temperature and at higher temperatures towards the melting point, the temperature-dependent optical material properties and their influence on the beam-matter interaction during the process are discussed. It is shown that the phase transition during melting leads to significant changes of the optical material properties of the analyzed powders.
Susceptibility to laser damage of optical-material surfaces originates from the nature of the surface as a transitional structure between optical-material bulk and its surroundings. As such, it requires technological processing to satisfy figure and roughness requirements and is also permanently subjected to environmental exposure. Consequently, enhanced absorption caused by mechanical structural damage or incorporation and sorption of microscale absorbing defects, even layers of organic materials, is always characteristic for optical-material surfaces. In this review physics of interaction of pulsed-laser radiation with surface imperfections for different types of optical materials (metals, semiconductors, dielectrics, etc.), mechanisms of damage initiation, damage morphology, and damage-site growth under repetitive pulse irradiation are discussed. Consideration is also given here to the surface treatments leading to the reduction of damage initiation sites, such as laser cleaning and conditioning, removal of the surface layers affected by the grinding/polishing process, and mitigation of the damage growth at already formed damage sites.
The microstructure and the distribution of carbon (C) in silicon carbide (SiC) ceramics were investigated by scanning electron microscopy and transmission electron microscopy. The results show that C can restrain the growth of SiC grains and densify SiC ceramics with the increase of the C content, but residual C introduces a new phase-C to SiC ceramics. The hardness of C is less than that of SiC, so it's difficult to be polished as optical materials. The existence of C phase doesn't lead to the increase of surface roughness on SiC optical materials, but it leads to the decrease of the reflectance of SiC as the optical materials because the optical absorption of C in visible light is stronger than that of SiC. It indicates that C content is very important to the surface properties of SiC, which will affect the coating of chemical vapor deposition SiC or Si on the surface of SiC ceramics because of the different physical and chemical properties between C and SiC. - Highlights: • The microstructure and the distribution of carbon were investigated. • A new phase in the optical materials is introduced. • It is difficult to be polished as the optical materials because of different phases. • Carbon leads to the decrease of reflectance because of its absorption to light wave. • The different properties may affect the coating of chemical vapor deposition on SiC.
Graphical abstract: - Highlights: • Semiorganic NLO material NaB(L-C{sub 4}H{sub 4}O{sub 5}){sub 2} has been grown with sizes up to 8 × 5 × 2 mm{sup 3}. • It crystallizes in the noncentrosymmetric Monoclinic space group P2. • Thermal analysis demonstrated NaB(L-C{sub 4}H{sub 4}O{sub 5}){sub 2} are thermally stable up to 280. • NaB(L-C{sub 4}H{sub 4}O{sub 5}){sub 2} has an absorption edge about 220 nm in the UV region. • It exhibits a NLO efficiency of about two times that of KDP (KH{sub 2}PO{sub 4}) standard. - Abstract: Single crystal of the semiorganic NLO material NaB(L-C{sub 4}H{sub 4}O{sub 5}){sub 2} has been grown with sizes up to 8 × 5 × 2 mm{sup 3} by the slow evaporation method. The crystal structure of this compound was determined by single crystal X-ray diffraction. It crystallizes in the Monoclinic space group P2 with lattice parameters a = 5.4045(11) Å, b = 11.692(2) Å, c = 9.4773(19) Å and Z = 2. Thermal analysis demonstrated NaB(L-C{sub 4}H{sub 4}O{sub 5}){sub 2} are thermally stable up to 280 °C. NaB(L-C{sub 4}H{sub 4}O{sub 5}){sub 2} exhibits an absorption edge about 220 nm in the UV region. The powder second-harmonic generation (SHG) measurement performed on the ground crystal indicates that it has a NLO efficiency of about 2 times that of KDP (KH{sub 2}PO{sub 4}) standard. In addition, the origin of stronger SHG effect was discussed.
Here we describe a framework and provides a computational tool to characterize the color quality and biological potential of light that is transmitted through glass and other optical materials. The IES TM-30 framework and Excel computation tool were adapted to evaluate color quality, with measures from CIE S 026, UL 24480, and the WELL Building Standard v2 added to evaluate biological potential. The user selects a pre-transmittance spectral power distribution (SPD), such as for a CIE D-Series Illuminant, Planckian radiation, electric lamp, or measurement of daylight at a building site. The tool allows a user to populate a database with spectral data for glazing or other optical materials, comprising spectral transmission and the spectral reflectance of both sides. The user creates a unit with one, two, or three panes of glazing or other optical materials, and the tool calculates the composite spectral transmittance accounting for reflections between materials. The tool computes the transmitted SPD, then determines colorimetric and photobiological outputs using the transmitted SPD as the test source. Glass, window, and skylight manufacturers can employ the tool to optimize glazing spectral transmission to achieve intentional colorimetric and photobiological performance with transmitted light. Electric lighting manufacturers, designers, and researchers can use the tool to evaluate the impact of glazing units and other optical materials on the color quality and biological potential of transmitted light.
The Optics and Materials Science & Technology (OMST) organization at Lawrence Livermore National Laboratory (LLNL) supplies optics, recycles optics, and performs the materials science and technology to advance optics and optical materials for high-power and high-energy lasers for a variety of missions. The organization is a core capability at LLNL. We have a strong partnership with many optical fabricators, universities and national laboratories to accomplish our goals. The organization has a long history of performing fundamental optical materials science, developing them into useful technologies, and transferring them into production both on-site and off-site. We are successfully continuing this same strategy today.
An experimental and numerical study of the laser-induced damage of the surface of optical material in the femtosecond regime is presented. The objective of this work is to investigate the different processes involved as a function of the ratio of photon to bandgap energies and compare the results to models based on nonlinear ionization processes. Experimentally, the laser-induced damage threshold of optical materials has been studied in a range of wavelengths from 1030 nm (1.2 eV) to 310 nm (4 eV) with pulse durations of 100 fs with the use of an optical parametric amplifier system. Semi-conductors and dielectrics materials, in bulk or thin film forms, in a range of bandgap from 1 to 10 eV have been tested in order to investigate the scaling of the femtosecond laser damage threshold with the bandgap and photon energy. A model based on the Keldysh photo-ionization theory and the description of impact ionization by a multiple-rate-equation system is used to explain the dependence of laser-breakdown with the photon energy. The calculated damage fluence threshold is found to be consistent with experimental results. From these results, the relative importance of the ionization processes can be derived depending on material properties and irradiation conditions. Moreover, the observed damage morphologies can be described within the framework of the model by taking into account the dynamics of energy deposition with one dimensional propagation simulations in the excited material and thermodynamical considerations.
Materials used for hard x-ray-free-electron laser (XFEL) optics must withstand high-intensity x-ray pulses. The advent of the Linac Coherent Light Source has enabled us to expose candidate optical materials, such as bulk B 4 C and SiC films, to 0.83 keV XFEL pulses with pulse energies between 1 μJ and 2 mJ to determine short-pulse hard x-ray damage thresholds. The fluence required for the onset of damage for single pulses is around the melt fluence and slightly lower for multiple pulses. We observed strong mechanical cracking in the materials, which may be due to the larger penetration depths of the hard x-rays.
Nonlinear encoding of optical information can be achieved using various forms of data representation. Here, we analyze the performances of different nonlinear information encoding strategies that can be employed in diffractive optical processors based on linear materials and shed light on their utility and performance gaps compared to the state-of-the-art digital deep neural networks. For a comprehensive evaluation, we used different datasets to compare the statistical inference performance of simpler-to-implement nonlinear encoding strategies that involve, e.g., phase encoding, against data repetition-based nonlinear encoding strategies. We show that data repetition within a diffractive volume (e.g., through an optical cavity or cascaded introduction of the input data) causes the loss of the universal linear transformation capability of a diffractive optical processor. Therefore, data repetition-based diffractive blocks cannot provide optical analogs to fully connected or convolutional layers commonly employed in digital neural networks. However, they can still be effectively trained for specific inference tasks and achieve enhanced accuracy, benefiting from the nonlinear encoding of the input information. Our results also reveal that phase encoding of input information without data repetition provides a simpler nonlinear encoding strategy with comparable statistical inference accuracy to data repetition-based diffractive processors. Our analyses and conclusions would be of broad interest to explore the push-pull relationship between linear material-based diffractive optical systems and nonlinear encoding strategies in visual information processors.
Potassium p-nitrophenolate dihydrate, a potential semiorganic nonlinear optical material, has been synthesized and grown by slow evaporation technique at room temperature. Single crystal X-ray analysis presents an unprecedented bonding between ions in the crystal with acentric structure. In the new structural investigation, p-nitrophenolate instead of producing bond between phenolic O{sup -} and K{sup +}, it seems to put nitro group in bonding with the metal ion. Optical absorption shows excellent transmission in the entire visible and near-infrared region. Room temperature photocurrent, transport properties are carried out in order to enhance the application for second harmonic generation and opto-electronic devices. Dielectric constant is found to be independent at higher frequencies. The crystal possesses prominent positive photoconduction in the presence of photoactive centers formed with trap energy level. The nonlinear optical activity is confirmed by Kurtz powder test.
Optical materials transparent in the CO 2 laser wavelength range have been evaluated regarding their suitability for components in ultrashort-pulse (≤ a few ps), high-peak-power (≥ a few TW) long-wave infrared (LWIR) lasers. We provide values for the nonlinear refractive index ( n 2 ) for seventeen materials, and onsets for nonlinear absorption for eleven materials. Characterizations were performed using a 2 ps laser pulse at λ =9.2 μ m. This paper methodically presents the newly acquired data in conjunction with existing literature on linear optical properties, establishing it as a comprehensive reference for designing high-peak-power LWIR laser systems.
The full analytical solutions for plane terahertz waves generated through optical rectification in a slab of a nonlinear optical material are calculated. Terahertz dispersion, absorption of both optical and terahertz waves, and multiple reflections are considered. The results are valid for an arbitrary difference between the optical group index and the terahertz refractive index, including equal indices. It is demonstrated that the full terahertz wave is freely propagating and has no contribution of a 'forced' pulse.
This report summarizes technical progress during the program “Investigation of High Temperature Silica Based Fiber Optic Materials”, performed by the Center for Photonics Technology of the Bradley Department of Electrical and Computer Engineering at Virginia Tech. The objective of this program was to investigate and characterize the performance of commercially available optical fibers at elevated temperatures in replicated fuel gas streams. It also includes performing a comprehensive study of the interactions with the chemical constituents with respect to structural, optical, and mechanical stability and developing design strategies to assure reliable performance of deployed optical fibers and sensors. In the eight quarters of the project, work was done to complete the database of test results and findings for the creation of an optical fiber selection guide for high temperature applications. It is anticipated that this design tool will provide the scientific community with the information necessary to deploy sensing systems with the most robust and reliable fused silica optical fibers. Standard telecommunications grade germanium doped single and multimode fibers have been shown to perform reliably up to temperatures of 1100°C in non-hydrogen environments and/or properly designed sensor applications. Pure silica core single mode and low OH, large core step index multimode fibers, which have also shown to perform reliability up to temperatures of 1000ºC, are recommended for hydrogen and moist environments.
The crystalline materials with nonlinear optical (NLO) properties are critically important for several technological applications, including nanophotonic and second harmonic generation devices. Urea is often considered to be a standard NLO material, due to the combination of non-centrosymmetric crystal packing and capacity for intramolecular charge transfer. Various approaches to crystal engineering of non-centrosymmetric molecular materials were reported in the literature. Here we propose using global lattice energy minimization to predict the crystal packing from the first principles. We developed a methodology that includes the following: (1) parameter derivation for polarizable force field AMOEBA; (2) local minimizations of crystal structures with these parameters, combined with the evolutionary algorithm for a global minimum search, implemented in program USPEX; (3) filtering out duplicate polymorphs produced; (4) reoptimization and final ranking based on density functional theory (DFT) with many-body dispersion (MBD) correction; and (5) prediction of the second-order susceptibility tensor by finite field approach. This methodology was applied to predict virtual urea polymorphs. After filtering based on packing similarity, only two distinct packing modes were predicted: one experimental and one hypothetical. DFT + MBD ranking established non-centrosymmetric crystal packing as the global minimum, in agreement with the experiment. Finite field approach was used to predict nonlinear susceptibility, and H-bonding was found to account for a 2.5-fold increase in molecular hyperpolarizability to the bulk value.
The interaction of a dielectric nano-particle or nano-defect, embedded in the bulk of an optical material, with an intense and short laser pulse is addressed. Due to the finite size of the target and the possible large production of electrons in the conduction band, large electric field enhancement or surintensity may be induced inside the particle. Since ionization rates also depend on the instantaneous electric field, a strong time-dependent connection between electron production and surintensity may take place. Such a connection is shown to possibly lead to a nonlinear temporal increase in the free electron density relevant from an avalanche process, called optical avalanche, similar to the one induced by electron impact ionization. However, the present build-up in the electron density clearly exhibits more nonlinear features than traditional collisional avalanche, which is shown to induce an exponential growth of the density: when the optical avalanche is engaged, the temporal electron evolution exhibits an explosive behavior. That leads to a nanometric plasma at solid density whose subsequent laser heating may lead locally to matter under extreme conditions. Furthermore, we show that the defect induces a change in the ionization mechanism in the course of interaction: a transition from multiphoton to tunnel ionization may take place.