Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “nanorods.”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Optical performance of top-down fabricated InGaN/GaN nanorod light emitting diode arrays

Vertically aligned InGaN/GaN nanorod light emitting diode (LED) arrays were created from planar LED structures using a new top-down fabrication technique consisting of a plasma etch followed by an anisotropic wet etch. The wet etch results in straight, smooth, well-faceted nanorods with controllable diameters and removes the plasma etch damage. 94% of the nanorod LEDs are dislocation-free and a reduced quantum confined Stark effect is observed due to reduced piezoelectric fields. Despite these advantages, the IQE of the nanorod LEDs measured by photoluminescence is comparable to the planar LED, perhaps due to inefficient thermal transport and enhanced nonradiative surface recombination.

42 ENGINEERING↗

Air- and Water-Resistant Noble Metal Coated Ferromagnetic Cobalt Nanorods

Cobalt nanorods possess ideal magnetic properties for applications requiring magnetically hard nanoparticles. However, their exploitation is undermined by their sensitivity toward oxygen and water, which deteriorates their magnetic properties. The development of a continuous metal shell inert to oxidation could render them stable, opening perspectives not only for already identified applications but also for uses in which contact with air and/or aqueous media is inevitable. However, the direct growth of a conformal noble metal shell on magnetic metals is a challenge. Here, we show that prior treatment of Co nanorods with a tin coordination compound is the crucial step that enables the subsequent growth of a continuous noble metal shell on their surface, rendering,them air- and water-resistant, while conserving the monocrystallity, metallicity and the Magnetic properties of the Co core. Thus, the as-synthesized tore shell ferromagnetic nanorods combine high;Magnetization and strong uniaxial Magnetic anisotropy, even after exposure to air and water, and hold promise for successful implementation in in vitro biodiagnostics requiring probes Of high magnetization and anisotropic shape.

Air- and Water-Resistant Noble Metal Coated Ferrom↗

Excitons in a quasi-one-dimensional quantum nanorod under a strong electric field

The response of an exciton in the ground and first excited states to a strong DC electric field is studied in a quasi-one-dimensional nano quantum well (i.e., nanorod) bounded by high symmetric barriers by studying the energy, the oscillator strength, the root-mean-square (RMS) average of the electron-hole (e-h) separation, and the average positions of the electron and the hole. The interplaying effect between the barrier confinement, e-h attraction, and the field-induced e-h separation for exciton binding is examined. We find that, for a long nanorod, the exciton energy, as well as, the oscillator strength drops abruptly as a function of the field near the exciton-dissociation field while the RMS average of the e-h separation rises rapidly. For shorter rods, the transition is more gradual due to the combined effect of the confinement and the long-range e-h interaction. A strong field is shown to transform the optically-inactive first excited state into an optically-active state in the field range between the dissociation field of the ground state and that of the first excited level. We also find that, in the ground state, the (lighter) electron is dragged by the (heavier) hole below the dissociation field. The dependence of the above mentioned properties on the rod length is also investigated for varying fields. The results are compared with those obtained for the rods with parabolic confinement.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Shape-Controlled Narrow-Gap SnTe Nanostructures: From Nanocubes to Nanorods and Nanowires

The rational design and synthesis of narrow-gap colloidal semiconductor nanocrystals (NCs) is an important step toward the next generation of solution-processable photovoltaics, photodetectors, and thermoelectric devices. SnTe NCs are particularly attractive as a Pb-free alternative to NCs of narrow-gap lead chalcogenides. Previous synthetic efforts on SnTe NCs have focused on spherical nanoparticles. Here we report new strategies for synthesis of SnTe NCs with shapes tunable from highly monodisperse nanocubes, to nanorods (NRs) with variable aspect ratios, and finally to long, straight nanowires (NWs). Reaction at high temperature quickly forms thermodynamically favored nanocubes, but low temperatures lead to elongated particles. Transmission electron microscopy studies of reaction products at various stages of the synthesis reveal that the growth and shape-focusing of monodisperse SnTe nanocubes likely involves interparticle ripening, while directional growth of NRs and NWs may be initiated by particle dimerization via oriented attachment.

36 MATERIALS SCIENCE↗

Synthesis and enhanced light absorption of alumina matrix nanocomposites containing multilayer oxide nanorods and silver nanoparticles

Highlights: {yields} Multilayer oxide nanorods (nanocables) were obtained via chemical processing. {yields} Ag nanoparticles were deposited between the core and shell layers of the nanorods. {yields} The structure and composition of the nanorods were analyzed by SEM and TEM. {yields} CoO nanorods and Ag nanoparticles enhance light absorption of the nanocomposites. -- Abstract: In this paper, multilayer oxide nanorods were deposited in the nanopores of anodic aluminum oxide (AAO) via solution infiltration followed by heat treatment. The nanorods have a core-shell structure. First, the shell (nanotube) with the thickness of about 40 nm was made of TiO{sub 2} through the hydrolysis of (NH{sub 4}){sub 2}TiF{sub 6}. Second, silver nanoparticles with the diameter of about 3 nm were added into the TiO{sub 2} layer through thermal decomposition of AgNO{sub 3} at elevated temperatures. Then, cylindrical cores (nanorods) of CoO and ZnO with 200 nm diameter were prepared, respectively. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to characterize the structure and composition of the nanorods. UV-vis light absorption measurements in the wavelength range from 350 to 1000 nm were performed to study the effect of nanorod and nanoparticle addition on the light absorption property of the alumina nanocomposites. It is found that CoO nanorods increase the light absorption of the alumina matrix composite in the wavelength range from 500 nm to 800 nm, but the TiO{sub 2} shell does not increase the light absorption much. The ZnO nanorods do not change the light absorption either. However, the addition of silver nanoparticles significantly enhances light absorption of both AAO/TiO{sub 2}/Ag/CoO and AAO/TiO{sub 2}/Ag/ZnO nanocomposites. This increase in the visible light absorption reveals that there exists surface plasmon around the fine silver nanoparticles in the nanorods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sb-Doped SnO 2 Nanorods Underlayer Effect to the α-Fe 2 O 3 Nanorods Sheathed with TiO 2 for Enhanced Photoelectrochemical Water Splitting

In this paper, a Sb-doped SnO 2 (ATO) nanorod underneath an α-Fe 2 O 3 nanorod sheathed with TiO 2 for photoelectrochemical (PEC) water splitting is reported. The experimental results, corroborated with theoretical analysis, demonstrate that the ATO nanorod underlayer effect on the α-Fe 2 O 3 nanorod sheathed with TiO 2 enhances the PEC water splitting performance. The growth of the well-defined ATO nanorods is reported as a conductive underlayer to improve α-Fe 2 O 3 PEC water oxidation performance. The α-Fe 2 O 3 nanorods grown on the ATO nanorods exhibit improved performance for PEC water oxidation compared to α-Fe 2 O 3 grown on flat fluorine-doped tin oxide glass. Furthermore, a simple and facile TiCl 4 chemical treatment further introduces TiO 2 passivation layer formation on the α-Fe 2 O 3 to reduce surface recombination. Finally, as a result, these unique nanostructures show dramatically improved photocurrent density (139% higher than that of the pure hematite nanorods).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Plasmonic nanorod probes’ journey inside plant cells for in vivo SERS sensing and multimodal imaging

Nanoparticle-based platforms are gaining strong interest in plant biology and bioenergy research to monitor and control biological processes in whole plants. However, in vivo monitoring of biomolecules using nanoparticles inside plant cells remains challenging due to the impenetrability of the plant cell wall to nanoparticles beyond the exclusion limits (5-20 nm). To overcome this physical barrier, we have designed unique bimetallic silver-coated gold nanorods (AuNR@Ag) capable of entering plant cells, while conserving key plasmonic properties in the near-infrared (NIR). To demonstrate cellular internalization and tracking of the nanorods inside plant tissue, we used a comprehensive multimodal imaging approach that included transmission electron microscopy (TEM), confocal fluorescence microscopy, two-photon luminescence (TPL), X-ray fluorescence microscopy (XRF), and photoacoustics imaging (PAI). We successfully acquired SERS signals of nanorods in vivo inside plant cells of tobacco leaves. On the same leaf samples, we applied orthogonal imaging methods, TPL and PAI techniques for in vivo imaging of the nanorods. This study first demonstrates the intracellular internalization of AuNR@Ag inside whole plant systems for in vivo SERS analysis in tobacco cells. This work demonstrates the potential of this nanoplatform as a new nanotool for intracellular in vivo biosensing for plant biology.

Cupil-Garcia, Vanessa↗

Photoelectrochemical performance of CdS nanorods grafted vertically aligned TiO{sub 2} nanorods

Graphical abstract: - Highlights: • TiO{sub 2} nanorods/CdS nanorods composite samples were successfully achieved. • The photocurrent density increased by 100 percent compared with pure TiO{sub 2}. • Photocurrent density increase mechanism of this photoanode was also forecasted. - Abstract: In this study, TiO{sub 2} nanorods/CdS nanorods composite samples were successfully synthesized by grafting CdS nanorods on vertically aligned TiO{sub 2} nanorods. A two-step hydrothermal method was used to prepare the samples. Some properties of the samples, such as morphological, structural, and optical properties were characterized by energy-dispersive X-ray detection, field emission scanning electron microscopy, X-ray diffraction, Raman spectroscopy, and ultraviolet-visible spectroscopy. Moreover, photoelectrochemical properties were studied via current-voltage and photocurrent spectrum measurements. The results showed that CdS nanorods grafted on top of TiO{sub 2} nanorods like a lawn. The amount grafted as well as the diameter and crystallinity of CdS nanorods increased first and then decreased as the grafting time increased, due to Ostwald ripening. Under the back-side illumination, the composite film with 2 h grafting time exhibited the highest photocurrent density which was almost twice of that of the pure TiO{sub 2} nanorods.

36 MATERIALS SCIENCE↗

Microstructural, chemical and textural characterization of ZnO nanorods synthesized by aerosol assisted chemical vapor deposition

ZnO nanorods were synthesized by aerosol assisted chemical vapor deposition onto TiO{sub 2} covered borosilicate glass substrates. Deposition parameters were optimized and kept constant. Solely the effect of different nozzle velocities on the growth of ZnO nanorods was evaluated in order to develop a dense and uniform structure. The crystalline structure was characterized by conventional X-ray diffraction in grazing incidence and Bragg–Brentano configurations. In addition, two-dimensional grazing incidence synchrotron radiation diffraction was employed to determine the preferred growth direction of the nanorods. Morphology and growth characteristics analyzed by electron microscopy were correlated with diffraction outcomes. Chemical composition was established by X-ray photoelectron spectroscopy. X-ray diffraction results and X-ray photoelectron spectroscopy showed the presence of wurtzite ZnO and anatase TiO{sub 2} phases. Morphological changes noticed when the deposition velocity was lowered to the minimum, indicated the formation of relatively vertically oriented nanorods evenly distributed onto the TiO{sub 2} buffer film. By coupling two-dimensional X-ray diffraction and computational modeling with ANAELU it was proved that a successful texture determination was achieved and confirmed by scanning electron microscopy analysis. Texture analysis led to the conclusion of a preferred growth direction in [001] having a distribution width Ω = 20° ± 2°. - Highlights: • Uniform and pure single-crystal ZnO nanorods were obtained by AACVD technique. • Longitudinal and transversal axis parallel to the [001] and [110] directions, respectively. • Texture was determined by 2D synchrotron diffraction and electron microscopy analysis. • Nanorods have its [001] direction distributed close to the normal of the substrate. • Angular spread about the preferred orientation is 20° ± 2°.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

PEDOT-PSS coated ZnO/C hierarchical porous nanorods as ultralong-life anode material for lithium ion batteries

ZnO/C hierarchical porous nanorods were synthesized through one-pot wet-chemical reaction followed by thermal calcination. It was found that ZnO/C porous nanorods are composed of numerous nanograins, exhibiting a hierarchical micro/nanostructure. In-situ synchrotron high energy X-ray diffraction study revealed that ZnO/C hierarchical porous nanorods involve a two-step reversible lithiation mechanism during charge/discharge; and part of ZnO and Zn remains at the end of the first discharge and charge process, respectively, leading to a low coulombic efficiency in the initial few cycles. The electrochemical test demonstrated that the reversible capacity and the rate performance of ZnO/C hierarchical porous nanorods anode have been greatly improved by PEDOT-PSS coating, which could maintain a reversible capacity of 623.94 mA h g(-1) after 1500 cycles at 1 C. Its excellent high rate capability and long cycle stability were attributed to the high electronic conductivity of PEDOT-PSS coating layer and the hierarchical structures of ZnO/C porous nanorods. (C) 2015 Elsevier Ltd. All rights reserved.

anode↗

High Density of Strong yet Deformable Intermetallic Nanorods Leads to an Excellent Room Temperature Strength-Ductility Combination in a High Entropy Alloy

This paper introduces a new microstructural template for high entropy alloys (HEAs), where the face centered cubic (FCC) complex concentrated solid solution is reinforced with a high density of strong, yet deformable, nanorods of an ordered multi-component intermetallic L12 compound. Thermodynamic modeling has been employed to design this HEA with a large L12 volume fraction. Thermo-mechanical processing by isothermal annealing of the conventionally processed bulk cold-rolled alloy directly at precipitation temperatures, has been applied to produce a high density of uniformly distributed L12 nanorods within refined FCC grains, resulting from concomitant recrystallization and discontinuous precipitation processes. The nanorod morphology of the discontinuous L12 product has been established from three-dimensional atom probe tomography. The refined grains result in a complete coverage of the microstructure with discontinuously precipitated intermetallic nanorods. This nanorod strengthened HEA exhibits an exceptionally high room temperature yield strength of ~1630 MPa, good tensile ductility of ~15%, and an ultimate tensile strength of ~1720 MPa. Furthermore, a single L12 phase alloy, melted based on the precipitate composition in the two-phase FCC + L12 HEA, exhibits very high compressive deformability and strain hardenability, unusual for ordered intermetallic compounds. These results open a new strategy for design of fine-grained microstructures strengthened via ordered intermetallic phases, exploiting the beneficial effects of discontinuous precipitation, for achieving very high room temperature tensile strengths while maintaining good ductility.

Gwalani, Bharat↗

Large scale and fast synthesis of multiferroic TbMn{sub 2}O{sub 5} single-crystalline nanorods

Graphical abstract: - Highlights: • Pure TbMn{sub 2}O{sub 5} phase was synthesized in a wide temperature range for a short time. • Smooth and uniform single-crystalline nanorods were obtained. • The element Mn in TbMn{sub 2}O{sub 5} exhibits a mix Mn{sup 3+/4+} valence state with an average value of 3.5+, and the element Tb exhibits Tb{sup 3+}. - Abstract: Crystalline multiferroic TbMn{sub 2}O{sub 5} nanorods were successfully synthesized by a facile and scalable molten salt synthesis with NaCl–Na{sub 2}SO{sub 4} eutectic salts used in the temperature range of 750–900 °C for only 2 h. The obtained TbMn{sub 2}O{sub 5} could be indexed to an orthorhombic phase by the results of XRD patterns. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), combined with high-resolution TEM (HRTEM), selected area electron diffraction (SAED), and EDS, have been employed to investigate the morphology, size, crystallinity, structure, and composition of the as-synthesized TbMn{sub 2}O{sub 5} nanorods. The TbMn{sub 2}O{sub 5} product exhibits smooth, uniform and crystalline nanorods with diameters of 30–70 nm, and length of varying from 3 to 6 μm. The results of X-ray photoelectron spectroscopy (XPS) analysis indicate that the elements Mn and Tb in TbMn{sub 2}O{sub 5} exhibit Mn{sup 3+/4+} and Tb{sup 3+}, respectively. The magnetic properties of the as-prepared TbMn{sub 2}O{sub 5} nanorods have been also characterized by physical properties measurement system (PPMS)

36 MATERIALS SCIENCE↗

Enhanced thermal stability of Ag nanorods through capping

Ag nanorods may serve as sensors in the detection of trace amounts of chemical agents, even single molecules, through surface enhanced Raman spectroscopy (SERS). However, thermal coarsening of Ag nanorods near room temperature limits their applications. This letter proposes the use of a thin oxide capping layer to enhance the thermal stability of Ag nanorods beyond 100 °C. Using electron microscopy characterization and SERS tests, the authors show that the proposed method is effective in stabilizing both morphology and sensitivity of Ag nanorods. The results of this work extend the applicability of Ag nanorods as chemical sensors to higher temperatures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Broadband resonances in indium-tin-oxide nanorod arrays

There is currently much discussion within the nanophotonics community regarding the origin of wavelength selective absorption/scattering of light by the resonances in nanorod arrays. Here, we report a study of resonances in ordered indium-tin-oxide nanorod arrays resulting from waveguide-like modes. We find that with only a 2.4% geometrical coverage, micron-length nanorod arrays interact strongly with light across a surprisingly wide band from the visible to the mid-infrared, resulting in less than 10% transmission. Simulations show excellent agreement with our experimental observations. The field profile in the vicinity of the rods obtained from simulations shows that the electric field is mainly localized on the surfaces of the nanorods for all resonances. Based on our analysis, the resonances in the visible are different in character from those in the infrared. When light is incident on the array, part of it propagates in the space between the rods and part of it is guided within the rods. The phase difference (interference) at the ends of the rods forms the basis for the resonances in the visible region. The resonances in the infrared are Fabry-Perot-like resonances involving standing surface waves between the opposing ends of the rods. Simple analytical formulae predict the spectral positions of these resonances. It is suggested that these phenomena can be utilized for wavelength-selective photodetectors, modulators, and nanorod-based solar cells.

14 SOLAR ENERGY↗