Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “multipath”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Observation of multipath effects in the detection of RF-modulated x-rays

As part of the Air Force Research Laboratory’s ongoing research in particle accelerators and beams, we recently began investigating the interaction of RF-modulated x-ray beams with RF structures. Additionally, these bremsstrahlung x-rays, produced using an S-band RF electron linac and tungsten foil, were able to drive RF signals at the linac frequency and its integer harmonics in an S-band waveguide. This was interpreted as a result of secondary electron production inside the waveguide by the modulated x-ray beam and implied that the primary electron beam RF modulation was preserved, to at least some degree, through both the processes of x-ray and secondary electron production. The strength of these signals induced on the waveguide varied as the distance of the waveguide from the tungsten foil changed, with the nature of these changes suggesting the existence of an interference process resulting from multipath propagation of the modulated x-rays. Here, we report on our initial attempt to verify this multipath propagation by altering the configuration of shielding and reflective masses in the environment of the waveguide. Finally, these measurements support the existence of a multipath propagation effect and further indicate that the RF modulation of the x-rays is preserved as they undergo scattering events inside the accelerator vault.

43 PARTICLE ACCELERATORS↗

Event-based Transmission Line Matrix Method for Simulating Site-Specific Multipath Propagation Characteristics

Accurate radio channel modeling is essential for deploying advanced wireless sensors in harsh industrial and urban environments. Site-specific propagation modeling tools are required to understand the channel parameters with in these environments. Multipath delay spread determines the frequency-selective fading characteristics of the channel. This paper describes a novel computationally inexpensive technique to determine multipath delay spread. Event-based transmission line matrix-based method is used to simulate the channel.

Kuruganti, Phani Teja↗

Multipath Curved Planar Reformations of Peripheral CT Angiography: Diagnostic Accuracy and Time Efficiency

ObjectivesTo compare diagnostic performance and time efficiency between 3D multipath curved planar reformations (mpCPRs) and axial images of CT angiography for the pre-interventional assessment of peripheral arterial disease (PAD), with digital subtraction angiography as the standard of reference.MethodsForty patients (10 females, mean age 72 years), referred to CTA prior to endovascular treatment of PAD, were prospectively included and underwent peripheral CT angiography. A semiautomated toolbox was used to render mpCPRs. Twenty-one arterial segments were defined in each leg; for each segment, the presence of stenosis > 70% was assessed on mpCPRs and axial images by two readers, independently, with digital subtraction angiography as gold standard.ResultsBoth readers reached lower sensitivity (Reader 1: 91 vs. 94%, p = 0.08; Reader 2: 89 vs. 93%, p = 0.03) but significantly higher specificity (Reader 1: 94 vs. 89%, p < 0.01; Reader 2: 96 vs. 95%, p = 0.01) with mpCPRs than with axial images. Reader 1 achieved significantly higher accuracy with mpCPRs (93 vs. 91%, p = 0.02), and Reader 2 had similar overall accuracy in both evaluations (94 vs. 94%, p = 0.96). Both readers read mpCPRs significantly faster than axial images (Reader 1: 5′45″ based on mpCPRs vs. 7′40″ based on axial images; Reader 2: 4′41″ based on mpCPRs vs. 6′57″ based on axial images; p < 0.01).ConclusionsmpCPRs are a promising 3D reformation technique that facilitates a fast assessment of PAD with high diagnostic accuracy.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Multicarrier chaotic communications in multipath fading channels without channel estimation

A multi-carrier chaotic shift keying(MC-CSK) communication scheme with low probability of interception(LPI) is proposed in this article. We apply chaotic spreading sequences in the frequency domain, mapping a different chip of a chaotic sequence to an individual orthogonal frequency division multiplexing(OFDM) subcarrier. In each block size of $M$ OFDM symbols, we use one pilot OFDM symbol inserted time-spaced in all-frequency to transmit the reference chaotic signal and use the other M-1 OFDM symbols to transmit the information-bearing signals each spreaded by the reference chaotic signal. At the receiver, we construct a differential detector after DFT and recover the information bits from the correlations between the pilot OFDM symbol and the other M-1 OFDM symbols in each block size of M. Performance analysis and computer simulations show that the MC-CSK outperforms differential chaos shift keying(DCSK) in AWGN channels with high bandwidth efficiency for the block size of M=2 and that the MC-CSK exploits effectively the frequent diversity of the multipath channel.

36 MATERIALS SCIENCE↗

Robust Quantum Control via Multipath Interference for Thousandfold Phase Amplification in a Resonant Atom Interferometer

We introduce a novel technique for enhancing the robustness of light-pulse atom interferometers against the pulse infidelities that typically limit their sensitivities. The technique uses quantum optimal control to favorably harness the multipath interference of the stray trajectories produced by imperfect atom-optics operations. We apply this method to a resonant atom interferometer and achieve thousandfold phase amplification, representing a 50-fold improvement over the performance observed without optimized control. Moreover, we find that spurious interference can arise from the interplay of spontaneous emission and many-pulse sequences and demonstrate optimization strategies to mitigate this effect. Given the ubiquity of spontaneous emission in quantum systems, these results may be valuable for improving the performance of a diverse array of quantum sensors. We anticipate our findings will significantly benefit the performance of matter-wave interferometers for a variety of applications, including dark matter, dark energy, and gravitational wave detection.

47 OTHER INSTRUMENTATION↗

Low Latency and High Data Rate (LLHD) Scheduler: A Multipath TCP Scheduler for Dynamic and Heterogeneous Networks

The scheduler is a crucial component of the multipath transmission control protocol (MPTCP) that dictates the path that a data packet takes. Schedulers are in charge of delivering data packets in the right order to prevent delays caused by head-of-line blocking. The modern Internet is a complicated network whose characteristics change in real-time. MPTCP schedulers are supposed to understand the real-time properties of the underlying network, such as latency, path loss, and capacity, in order to make appropriate scheduling decisions. However, the present scheduler does not take into account all of these characteristics together, resulting in lower performance. We present the low latency and high data rate (LLHD) scheduler, which successfully makes scheduling decisions based on real-time information on latency, path loss, and capacity, and achieves around 25% higher throughput and 45% lower data transmission delay than Linux’s default MPTCP scheduler.

97 MATHEMATICS AND COMPUTING↗

Joint Channel Equalization and Symbol Detection for IoT Devices in Severe Multipath Channels

Internet of Things (IoT) devices often transmit very short message blocks without strong error correction coding or pilots for channel equalization. When the transmitted signals encounter a severe multipath channel, the receiver is often unable to equalize the resulting inter-symbol interference (ISI) via traditional methods, leading to a high retransmission rate. This paper proposes a joint channel equalization and symbol detection scheme for this scenario by utilizing the preamble sequence as a training pilot for equalization and the relatively weak cyclic redundancy check (CRC) 8-Dallas code for error correction. By assuming a sparse channel impulse response, the proposed joint channel equalization and symbol detection scheme formulates an l1 norm constrained optimization problem and solves it by a saddle-point algorithm. The proposed algorithm is applied to a set of real-world underwater animal tracking IoT data, and the results show improvement of correct message detection rate from 21:5% to 41:6%.

Jing, Shusen↗

Dynamic Processes of CO 2 Storage in the Field: 1. Multiscale and Multipath Channeling of CO 2 Flow in the Hierarchical Fluvial Reservoir at Cranfield, Mississippi

A consistent picture of dynamic channeling, invasion, spreading, and breakthrough (CISB) of supercritical CO 2 in the hierarchical fluvial reservoir at Cranfield, Mississippi is presented after 10 years of integration and analysis of complementary field monitoring and characterization data. The dynamic CISB with small-scale CO 2 -flow channels in the F1-F2-F3 cross section (F1, F2, and F3 are one injection and two monitoring wells) was imaged by daily electrical resistance tomography (ERT) and time-lapse crosswell seismic surveys. One, three, and four CO 2 flow channels logged at F1, F2, and F3, respectively, were dynamically connected with strong temporal variations in CO 2 saturation during 221 days of drainage with injection rate doubling twice and 81 days of imbibition. Three intermediate-scale CO 2 flow channels (with highest CO 2 saturation) normal to the cross section were ERT-imaged during late-time drainage. A large-scale, sinuous fluvial CO 2 flow channel was imaged by repeat surface seismic survey at the end of the imbibition. The fluvial sandstone channel sinuously bypasses the F1-F2-F3 cross section in a point bar, but the channel is connected to the cross section through an intermediate-scale sandstone channel, forming a complicated flow channel network. The multiscale flow channel network (in the fluvial channel-point bar system) revealed from the observed CISB enables us to consistently interpret the hydrological monitoring data of three tracer tests, each conducted during an injection rate step, and preinjection hydraulic-thermal-tracer tests. Finally, this interpretation of the CISB and flow channel network can guide future modeling and data inversion to best understand the effects of natural heterogeneity on CO 2 storage efficiency and residual trapping.

58 GEOSCIENCES↗

OLiMPS. OpenFlow Link-layer MultiPath Switching

The OLiMPS project’s goal was the development of an OpenFlow controller application allowing load balancing over multiple switched paths across a complex network topology. The second goal was to integrate the controller with Dynamic Circuit Network systems such as ESnet’s OSCARS. Both goals were achieved successfully, as laid out in this report.

97 MATHEMATICS AND COMPUTING↗

Radar signal pre-processing to suppress surface bounce and multipath

A method and system for detecting the presence of subsurface objects within a medium is provided. In some embodiments, the imaging and detection system operates in a multistatic mode to collect radar return signals generated by an array of transceiver antenna pairs that is positioned across the surface and that travels down the surface. The imaging and detection system pre-processes that return signal to suppress certain undesirable effects. The imaging and detection system then generates synthetic aperture radar images from real aperture radar images generated from the pre-processed return signal. The imaging and detection system then post-processes the synthetic aperture radar images to improve detection of subsurface objects. The imaging and detection system identifies peaks in the energy levels of the post-processed image frame, which indicates the presence of a subsurface object.

47 OTHER INSTRUMENTATION↗

Multipath Very-Simplified Estimate of Adversary Sequence Interruption v. 2.1

MP VEASI is a training tool that models physical protection systems for fixed sites using Adversary Sequence Diagrams (ASDs) and then uses the ASD to find most-vulnerable adversary paths through the ASD. The identified paths have the lowest Probability of Interruption among all the paths through the ASD.

Snell, Mark K.↗

Pulse Shaping and Matched Filters for EMAT Communication System

Electromagnetic acoustic transducer (EMAT) is used as a noncontact sensor for acoustic communication in a stainless-steel plate channel. The acoustic wave multipath propagations within the channel cause intersymbol interference (ISI). ISI highly degrades the signal-to-noise ratio (SNR). The poor SNR will result in a low bitrate and a high bit error rate (BER). In this study, a test platform is designed to estimate the performance of the EMAT communication system. Two periodic-permanent-magnet (PPM) EMATs are designed to be used as a transmitter and a receiver. EMAT generates shear-horizontal (SH) wave propagating through the stainless-steel plate channel. We present methods to minimize the ISI effect and recover the message embedded in the received signals hampered by interference, reverberation and multipath effects. The root raised cosine (RRC) filters are introduced as a pulse-shaping filter for transmission and a matched filter for receiving messages. Amplitude Shift Keying (ASK) method is used for modulating the transmitted binary message. The pulse shaping and matched filters reduced the ISI caused by the undesirable multipath effect significantly to the extent that a 5-kbps bitrate can be achieved without any error (zero BER).

Huang, Xin↗