SEARCH · Engineering Papers

Results for “momentum ordering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Topological excitonic insulator with tunable momentum order

Correlated topological materials often maintain a delicate balance among physical symmetries. Many topological orders are symmetry protected, whereas most correlated phenomena arise from spontaneous symmetry breaking. Cases where symmetry breaking induces a non-trivial topological phase are rare. Here we demonstrate the presence of two such phases in Ta 2 Pd 3 Te 5 , where Coulomb interactions form excitons that condense below 100 K, one with zero and the other with finite momentum. We observed a full spectral bulk gap, which stems from exciton condensation. This topological excitonic insulator state spontaneously breaks mirror symmetries but involves a weak structural coupling. Scanning tunnelling microscopy shows gapless boundary modes in the bulk insulating phase. Their magnetic field response, together with theoretical modelling, indicates a topological origin. These observations establish Ta 2 Pd 3 Te 5 as a topological excitonic insulator in a three-dimensional crystal. Finally, our results manifest a unique sequence of topological exciton condensations in a bulk crystal, offering exciting opportunities to study critical behaviour and excitations.

36 MATERIALS SCIENCE↗

NASA NTRS1987

Closure models of turbulent third-order momentum and temperature fluctuations

A study is made for the development and computations of the separating and reattaching shear flows. The highlight of the study is an attempt to predict the third-moments of turbulent velocity which is responsible for the diffusion transport of the Reynolds stresses. The present computations show that the third-moments obtained by employing the law-Reynolds number model of transport equations improve the prediction of the third-moments. The modelling for scalar variables is also performed for the heat transfer computations. Since the transport equations for (u sub j theta)* and (u sub i u sub j theta) have been given in the last NASA CR, the study has been extended further to the modeling of (theta sup 2), (u sub i theta sup 2) and epsilon sub theta (dissipation rate of (theta sup 2)). The formulations are shown in this report.

Amano, R. S.↗

DOE OSTI2022

Higher-order transverse momentum fluctuations in heavy-ion collisions

In relativistic heavy-ion collisions, the event-by-event mean transverse momentum fluctuations are sensitive to overlap area and energy density fluctuations in the initial state. We present a framework to calculate p T fluctuations up to fourth order using standard and subevent methods, which is validated using the HIJING model. We observe a power-law dependence for cumulants of all orders as a function of charged particle multiplicity N ch , consistent with a simple independent source picture. The fluctuation in pp collisions is observed to be larger than for p+Pb, Pb + Pb, and Xe + Xe collisions at the same N ch due to bias in the number of contributing sources. The short-range correlations are greatly suppressed in the subevent method in comparison to calculations based on the standard method. This paper provides a baseline for transverse momentum fluctuations without the presence of final-state effects.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2020

Probe Chiral Magnetic Effect with Signed Balance Function

In this paper a pair of observables are proposed as alternative ways, by examining the fluctuation of net momentum-ordering of charged pairs, to study the charge separation induced by the Chiral Magnetic Effect (CME) in relativistic heavy ion collisions. They are, the out-of-plane to in-plane ratio of fluctuation of the difference between signed balance functions measured in pair’s rest frame, and the ratio of it to similar measurement made in the laboratory frame. In this work, both observables have been studied with simulations including flow-related backgrounds, and for the first time, backgrounds that are related to resonance's global spin alignment. The two observables have similar positive responses to signal, and opposite, limited responses to identifiable backgrounds arising from resonance flow and spin alignment. Both observables have also been tested with two realistic models, namely, a multi-phase transport (AMPT) model and the anomalous-viscous fluid dynamics (AVFD) model. These two observables, when cross examined, will provide useful insights in the study of CME-induced charge separation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2021

Improved optical standing-wave beam splitters for dilute Bose–Einstein condensates

Bose–Einstein condensate (BEC)-based atom interferometry exploits low temperatures and long coherence lengths to facilitate high-precision measurements. Progress in atom interferometry promises improvements in navigational devices like gyroscopes and accelerometers, as well as applications in fundamental physics such as accurate determination of physical constants. Previous work demonstrates that beam splitters and mirrors for coherent manipulation of dilute BEC momentum in atom interferometers can be implemented with sequences of non-resonant standing-wave light pulses. While previous work focuses on the optimization of the optical pulses’ amplitude and duration to produce high-order momentum states with high fidelity, we explore how varying the shape of the optical pulses affects optimal beam-splitter performance, as well as the effect of pulse shape on the sensitivity of optimized parameters in achieving high fidelity in high-momentum states. Here, in simulations of two-pulse beam splitters utilizing optimized square, triangle, and sinc-squared pulse shapes applied to dilute BECs, we, in some cases, reduce parameter sensitivity by an order of magnitude while maintaining fidelity.

74 ATOMIC AND MOLECULAR PHYSICS↗

NASA NTRS1988

Consistent boundary conditions for reduced Navier-Stokes (RNS) scheme applied to three-dimensional internal viscous flows

Three-dimensional internal viscous flow problems are presently addressed by a consistent and efficient set of boundary conditions for the multisweep space-marching, pressure-elliptic Reduced Navier-Stokes scheme. Since continuity is by this means directly satisfied at all points in the flow domain, the first-order momentum equations are directly solvable for pressure without the requirement for a Poisson pressure-correction equation. Incompressible flow solutions are obtained for straight and curved ducts of square cross section, in order to validate the procedure. Usefulness is demonstrated for internal flows with strong interactions, as would be found in turbomachine geometries.

Reddy, D. R.↗

DOE OSTI2024

Exploring nonlinear Rashba effect and spin Hall conductivity in Janus MXenes W 2 ⁢CO ⁢𝑋 (𝑋=S, Se, Te)

Rashba spin-orbit coupling (RSOC) facilitates spin manipulation without relying on an external magnetic field, opening up exciting possibilities for advanced spintronic devices. In this paper, we examine the effects of crystal momentum (𝑘) nonlinearity and anisotropy on the conventional Rashba effect, with a particular focus on their impact on the spin Hall conductivity (SHC) in a newly predicted family of 2D Janus materials, W 2 ⁢CO⁢𝑋 (𝑋 =S, Se, Te). Using first-principles density functional theory calculations, we confirm the dynamical and mechanical stability of the studied 2D materials. Strikingly, this materials family exhibits pronounced nonlinear Rashba spin splitting at the Γ point of Brillouin zone near the Fermi level, which cannot be adequately described by the linear-𝑘 Rashba model. Therefore, third-order momentum contributions (𝑘 3 ) must be incorporated into the Rashba Hamiltonian. Our analysis reveals that among the studied systems, W 2 ⁢COS exhibits the highest 𝑘 3 contribution of −45.9 eV Å 3 , despite having the lowest linear Rashba constant. Here, a detailed analysis of electronic structure reveals topologically nontrivial behavior in these 2D materials, yielding sizable SHC that is primarily governed by the nonlinear Rashba effect. Notably, these materials also exhibit large spin Hall angle (0.018–2.5 at E 𝐹 ), which is comparable to that of in bulk topological insulators like Bi 2 ⁢Se 3 and Bi 2 ⁢Te 3 , and surpassing those in narrow bandgap bulk semiconductors GeTe and SnTe, as well as heavy metals such as Pt. Sizable SHC, large spin Hall angles, and the ability to tune SHC via electric fields without altering the topological properties, rooted in the crystal field splitting, underscore the potential of these materials for spintronic applications.

Electronic structure↗

DOE OSTI2022

Slip velocity boundary conditions for the lattice Boltzmann modeling of microchannel flows

Abstract Slip flows in ducts are important in numerous engineering applications, most notably in microchannel flows. Compared to the standard no‐slip Dirichlet condition, the case of slip formulates as a Robin‐type condition for the fluid tangential velocity. Such an increase in mathematical complexity is accompanied by a more challenging numerical transcription. The present work concerns with this topic, addressing the modeling of the slip velocity boundary condition in the lattice Boltzmann method (LBM) applied to steady slow viscous flows inside ducts of nontrivial shapes. As novelty, we extend the newly revised local second‐order boundary (LSOB) Dirichlet fluid flow method [ Philos. Trans. R. Soc. A 378, 20190404 (2020)] to implement the slip velocity condition within the two‐relaxation‐time (TRT) framework. The LSOB follows an in‐node philosophy where its operation principle seeks to explicitly reconstruct the unknown boundary populations in the form of a third‐order accurate Chapman–Enskog expansion, where the wall slip condition is built‐in as a normal Taylor‐type condition. The key point of this approach is that the required first‐ and second‐order momentum derivatives, rather than computed through nonlocal finite difference approximations, are locally determined through a simple local linear algebra procedure, whose formulation is particularly aided by the TRT symmetry argument. To express the obtained derivatives, two approaches are considered, called and , which operate with node and wall variables, respectively. These two formulations are developed to prescribe the physical slip condition over plane and curved walls, including the corners. Their consistency and accuracy characteristics are examined against alternative linkwise strategies to impose the wall slip velocity, such as the kinetic‐based diffusive bounce‐back scheme, the central linear interpolation slip scheme, and the multireflection slip scheme. The several slip schemes are tested over different 3D microchannel configurations, with walls not conforming with the LBM uniform mesh. Numerical tests confirm the advanced accuracy characteristics of the proposed LSOB slip boundary scheme, revealing the added challenge of the wall slip modeling, and that parabolic accuracy is a necessary requirement to reach second‐order accuracy within this problem class.

Silva, Goncalo↗

DOE OSTI2022

A Study of QCD Radiation in VBF Higgs Production with Vincia and Pythia

We discuss and illustrate the properties of several parton-shower algorithms available in Pythia and Vincia, in the context of Higgs production via vector boson fusion (VBF). In particular, the distinctive colour topology of VBF processes allows to define observables sensitive to the coherent radiation pattern of additional jets. We study a set of such observables, using the Vincia sector-antenna shower as our main reference, and contrast it to Pythia's transverse-momentum-ordered DGLAP shower as well as Pythia's dipole-improved shower. We then investigate the robustness of these predictions as successive levels of higher-order perturbative matrix elements are incorporated, including next-to-leading-order matched and tree-level merged calculations, using Powheg Box and Sherpa respectively to generate the hard events.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

NASA NTRS1988

Consistent boundary conditions for Reduced Navier-Stokes (RNS) scheme applied to 3-dimensional internal viscous flows

A consistent and efficient set of boundary conditions is developed for the multi-sweep space-marching pressure-elliptic Reduced Navier-Stokes (RNS) scheme as applied for 3-D internal viscous flow problems. No-slip boundary conditions are directly imposed on the solid walls. There is no iteration procedure required in the cross plane to ensure mass conservation across each marching plane. The finite difference equations forming the coefficient matrix are ordered such that the surface normal velocity is specified on all the solid walls; unlike external flows, a pressure boundary condition in the cross plane is not required. Since continuity is directly satisfied at all points in the flow domain, the first order momentum equations can be solved directly for the pressure without the need for a Poisson pressure correction equation. The procedure developed herein can also be applied with periodic boundary conditions. The analysis is given for general compressible flows. Incompressible flow solutions are obtained, for straight and curved ducts of square cross section, to validate the procedure. These solutions are used to demonstrate the applicability of the RNS scheme, with the improved boundary conditions for internal flows with strong interaction, as would be encountered in ducts and turbomachinery geometries.

Reddy, D. R.↗

NASA NTRS1991

RIPPLE - A new model for incompressible flows with free surfaces

A new free surface flow model, RIPPLE, is summarized. RIPPLE obtains finite difference solutions for incompressible flow problems having strong surface tension forces at free surfaces of arbitrarily complex topology. The key innovation is the continuum surface force model which represents surface tension as a (strongly) localized volume force. Other features include a higher-order momentum advection model, a volume-of-fluid free surface treatment, and an efficient two-step projection solution method. RIPPLE's unique capabilities are illustrated with two example problems: low-gravity jet-induced tank flow, and the collision and coalescence of two cylindrical rods.

Kothe, D. B.↗

DOE OSTI2024

Establishing coherent momentum-space electronic states in locally ordered materials

Rich momentum-dependent electronic structure naturally arises in solids with long-range crystalline symmetry. Reliable and scalable quantum technologies rely on materials that are either not perfect crystals or non-crystalline, breaking translational symmetry. This poses the fundamental questions of whether coherent momentum-dependent electronic states can arise without long-range order, and how they can be characterized. Here we investigate Bi 2 Se 3 , which exists in crystalline, nanocrystalline, and amorphous forms, allowing direct comparisons between varying degrees of spatial ordering. Through angle-resolved photoemission spectroscopy, we show for the first time momentum-dependent band structure with Fermi surface repetitions in an amorphous solid. The experimental data is complemented by a model that accurately reproduces the vertical, dispersive features as well as the replication at higher momenta in the amorphous form. These results reveal that well-defined real-space length scales are sufficient to produce dispersive band structures, and that photoemission can expose the imprint of these length scales on the electronic structure.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Transferring orbital angular momentum to an electron beam reveals toroidal and chiral order

Orbital angular momentum (OAM) and torque transfer play central roles in a wide range of magnetic textures and devices including skyrmions and spin-torque electronics. Analogous topological structures are now also being explored in ferroelectrics, including polarization vortex arrays in ferroelectric/dielectric superlattices. Unlike magnetic toroidal order, electric toroidal order does not couple directly to linear external fields. Instead, we find that the presence of an electric toroidal moment in a ferrorotational phase transfers measurable torque and OAM to a localized electron beam in the ballistic limit. We record these torque transfers from a high-energy electron beam using a momentum-resolved detector. This approach provides a high-sensitivity method to detect polarization fields and their more complex order parameters and topologies. In addition to toroidal order, we also demonstrate high-precision measurements of vorticity and chirality for polar vortexlike phases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2021

Gauge-symmetrization method for energy-momentum tensors in high-order electromagnetic field theories

For electromagnetic field theories, canonical energy-momentum conservation laws can be derived from the underpinning spacetime translation symmetry according to the Noether procedure. However, the canonical energy-momentum tensors (EMTs) are neither symmetric nor gauge-symmetric (gauge invariant). The Belinfante-Rosenfeld (BR) method is a well-known procedure to symmetrize the EMTs, which also renders them gauge symmetric for first-order field theories. High-order electromagnetic field theories appear in the study of gyrokinetic systems for magnetized plasmas and the Podolsky system for the radiation reaction of classical charged particles. For these high-order field theories, gauge-symmetric EMTs are not necessarily symmetric and vice versa. In the present study, we develop a new gauge-symmetrization method for EMTs in high-order electromagnetic field theories. The Noether procedure is carried out using the Faraday tensor $F_{μν}$, instead of the 4-potential $A_{μ}$, to derive a canonical EMT $T^{μν}_{N}$. We show that the gauge-dependent part of $T^{μν}_{N}$ can be removed using the displacement-potential tensor $F^{σμν}$ ≡ $D^{σμ}A^{ν}/4π$, where $D^{σμ}$ is the antisymmetric electric displacement tensor. This method gauge-symmetrizes the EMT without necessarily making it symmetric, which is adequate for applications not involving general relativity. For first-order electromagnetic field theories, such as the standard Maxwell system, $F^{σμν}$ reduces to the familiar BR superpotential $S^{σμν}$, and the method developed can be used as a simpler procedure to calculate $S^{σμν}$ without employing the angular momentum tensor in 4D spacetime. When the electromagnetic system is coupled to classical charged particles, the gauge-symmetrization method for EMTs is shown to be effective as well.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

Transverse momentum-dependent heavy-quark fragmentation at next-to-leading order

The transverse momentum-dependent fragmentation functions (TMD FFs) of heavy (bottom and charm) quarks, which we recently introduced, are universal building blocks that enter predictions for a large number of observables involving final-state heavy quarks or hadrons. They enable the extension of fixed-order subtraction schemes to quasi-collinear limits, and are of particular interest in their own right as probes of the nonperturbative dynamics of hadronization. In this paper we calculate all TMD FFs involving heavy quarks and the associated TMD matrix element in heavy-quark effective theory (HQET) to next-to-leading order in the strong interaction. Our results confirm the renormalization properties, large-mass, and small-mass consistency relations predicted in our earlier work. We also derive and confirm a prediction for the large-z behavior of the heavy-quark TMD FF by extending, for the first time, the formalism of joint resummation to capture quark mass effects in heavy-quark fragmentation. Our final results in position space agree with those of a recent calculation by another group that used a highly orthogonal organization of singularities in the intermediate momentum-space steps, providing a strong independent cross check. As an immediate application, we present the complete quark mass dependence of the energy-energy correlator (EEC) in the back-to-back limit at $\mathcal{O}\left({\alpha}_s\right)$.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2020

Probing interfacial momentum closures in two-phase bubbly flow with machine learning-aided methods

Computational fluid dynamics (CFD) approach has already reached a high level of maturity for single-phase flows, however the development of closure models for two-phase flow requires additional attention. Multiphase CFD (M-CFD) methods resolve the conservation equations for mass, momentum and energy while differing in the approaches and strategies adopted in the physical closure models. The most widely adopted framework for M-CFD is the Eulerian-Eulerian two-fluid approach which assumes that all phases are co-existing inside each computational cell. For each fluid, the full set of conservation equations is solved; therefore, each fluid has a different velocity field. For adiabatic two-phase flow, the mechanisms of the interfacial momentum transfer are modeled by the interfacial forces representing different physical mechanisms. One of the crucial issues in the development and application of two-fluid model is the understanding of the interfacial momentum closures which determines the bubble distribution and migration behaviors. Dedicated experiments are performed to support the physical understanding and drive the closures’ development. However, limitations exist due to the uncertainties in the experimental measurement and the simplified analytical assumptions which have difficulties on representing the complex non-linear flow fields. In this paper, a data-driven approach, Feature Similarity Measurement (FSM), is developed and proposed to resolve the challenges of modeling the interfacial forces closures. Case study is performed with two-phase flow scenarios where the high-fidelity experimental data is available. Within the Eulerian-Eulerian two-fluid framework, only momentum equations for gas and liquid phases are solved and reduced-order interfacial momentum closures are aided with FSM. Predictions of void fraction and velocity fields are analyzed and demonstrate the potential of machine learning-driven interfacial forces closures.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2020

Phase-matching analysis in high-order harmonic generation with nonzero orbital angular momentum Laguerre-Gaussian beams

Through high-order harmonic generation driven by intense ultrashort vortex infrared or midinfrared lasers, a nonzero orbital angular momentum can be imprinted onto extreme ultraviolet (XUV) or soft-x-ray (SXR) light pulses. Here we simulate the generation of vortex XUV harmonics in the gas medium as well as their propagation in vacuum till reaching the far field. In this work, we find that the intensity and phase of generated high harmonics are very sensitive to the position of gas jet with respect to the laser focus. The topological charge of the $\textit{q}$th harmonic is found to be $\textit{q}$ times that of the driving Laguerre-Gaussian beam. Each harmonic in the far field appears as a single ring in the transverse plane with an invariant diameter which is scalable with the fundamental topological charge only when the gas jet is placed after the laser focus. The underlying phase-matching mechanism is analyzed by examining the spatial map of the coherence length and by calculating the evolution of harmonic emission in the medium. We anticipate this work to stimulate interest in generating intense vortex XUV or SXR attosecond pulses for probing dynamics of molecules where special molecular features are difficult to be detected with linear or circular XUV or SXR pulses.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

NASA NTRS1992

A second-order theory for transverse ion heating and momentum coupling due to electrostatic ion cyclotron waves

A second-order theory for electrostatic instabilities driven by counterstreaming ion beams is developed which describes momentum coupling and heating of the plasma via wave-particle interactions. Exchange rates between the waves and particles are derived, which are suitable for the fluid equations simulating microscopic effects on macroscopic scales. Using a fully kinetic simulation, the electrostatic ion cyclotron instability due to counterstreaming H(+) beams has been simulated. A power spectrum from the kinetic simulation is used to evaluate second-order exchange rates. The calculated heating and momentum loss from second-order theory is compared to the numerical simulation.

Miller, Ronald H.↗