Nanoceria-Supported Single-Atom Platinum Catalysts for Direct Methane Conversion
Abstract not provided
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Abstract not provided
Not Available
Low-temperature non-thermal plasmas produce highly reactive chemical environments made up of electrons, ions, radicals, and vibrationally excited molecules. These reactive species, when combined with catalysts, can help drive thermodynamically unfavorable chemical reactions at low temperatures and atmospheric pressure. The conversion of methane (CH 4 ) to produce other value-added chemicals is a good model system because of its applicability to a wide range of industries. To effectively create these plasma catalytic systems, a fundamental understanding of the plasma-phase chemistry alone is imperative. While there have been many studies on methane plasmas and how certain operating conditions (i.e., gas composition and power) affect the plasma, there is limited understanding on how changing bulk reaction temperature affects the plasma properties and ensuing plasma chemistry. Here, in this work, we use a dielectric barrier discharge to investigate the effects of temperature on the reaction chemistry and the plasma’s electrical properties in various methane-gas mixtures. Results show that increasing temperature leads to a reduction in methane conversion as well as changes to both the gas and dielectric material pre-breakdown, which manifests itself in temperature-dependent electrical properties of the plasma. Experiments at various temperatures and power show a positive correlation between key electrical plasma properties (average charge and lifetime per filament) and the measured methane conversion as a function of temperature.
Direct non-oxidative methane conversion (DNMC) converts methane (CH 4 ) in one step to olefin and aromatic hydrocarbons and hydrogen (H 2 ) co-product. Membrane reactors comprising methane activation catalysts and H 2 -permeable membranes can enhance methane conversion by in situ H 2 removal via Le Chatelier's principle. Rigorous description of H 2 kinetic effects on both membrane and catalyst materials in the membrane reactor, however, has been rarely studied. In this work, we report the impact of hydrogen activation by hydrogen-permeable SrCe 0.8 Zr 0.2 O 3-δ (SCZO) perovskite oxide material on DNMC over an iron/silica catalyst. The SCZO oxide has mixed ionic and electronic conductivity and is capable of H 2 activation into protons and electrons for H 2 permeation. In the fixed-bed reactor packed with a mixture of SCZO oxide and iron/silica catalyst, stable and high methane conversion and low coke selectivity in DNMC was achieved by co-feeding of H 2 in methane stream. The characterizations show that SCZO activates H 2 to favor “soft coke” formation on the catalyst. The SCZO could absorb H 2 in situ to lower its local concentration to mitigate the reverse reaction of DNMC in the tested conditions. The co-existence of H 2 co-feed, SCZO oxide, and DNMC catalyst in the present study mimics the conditions of DNMC in the H 2 -permeable SCZO membrane reactor. The findings in this work offer the mechanistic understanding of and guidance for the design of H 2 -permeable membrane reactors for DNMC and other alkane dehydrogenation reactions.
A non-oxidative methane conversion catalytic system has been successfully developed. Ball-milling and annealing above 1973 K are necessary in order to synthesize the unique methane activation catalyst. Characterization and evaluation of catalysts shows that the surface area should be carefully controlled to minimize coke deposition. The influence of temperature, pressure, space velocity and hydrogen concentration on catalytic process was systematically studied. The reaction conditions were optimized to a combination of 1323 K, ambient pressure and a space velocity of 4900 ml/g·h. A process, using 0.5% Fe/SiO 2 catalyst under these conditions, yield a methane conversion of 15.62%, with product distribution of 40.05% C 2 , 26.48% BTX and 10.7% naphthalene and demonstrated stable operation of at least 50 hours. This result meets the milestone in the phase I proposal. A non-oxidative methane catalyst-integrated SOFC reactor was accomplished, using nickel-free cells of both ScSZ oxygen-ion conductor and BZY proton conductor. With in-situ hydrogen removal enabled by SOFC, hydrogen concentration in the reactor was effectively reduced, shifting reaction equilibrium and boosting methane conversion. However, due to the high temperature requirement of this reaction, most available proton-conducting SOFCs become oxygen-ion conducting, leading to side reactions and counteracting the benefits from hydrogen removal. To take advantage of the enhanced oxygen-ion conductance of SOFC at high temperatures, we have also paired the nickel-free SOFCs with high-performance oxidative coupling of methane (OCM) catalysts. The SOFC-OCM tubular membrane reactor, employing a Mn-Ce-Na 2 WO 4 /SiO 2 -based catalyst, demonstrates a remarkable performance of 60.7% methane conversion with 41.6% C 2 + selectivity, 5.8 ethylene-to-ethane ratio and 19.4% ethylene yield. The use of integrated SOFC-OCM reactor enables better hydrocarbon selectivity and higher ethylene-to-ethane ratio, eliminating the need of an expensive air separation unit and preventing the direct co-feed of explosive methane-oxygen mixture. We believe this presents a great promise towards commercialization as an advanced methane conversion technology.
Direct methane conversion to liquid fuels or value-added chemicals is a promising technology to utilize natural resources without resorting to further petroleum extraction. However, discovering efficient catalysts for this reaction is challenging due to either coke formation or unfavorable C-H bond activation. Herein, we design single-atom alloy (SAA) catalysts to simultaneously eliminate the above two bottlenecks based on mechanism-guided strategies: (1) the active single atom enables favorable C-H bond breaking and (2) the less reactive host metal facilitates C-C coupling and thus avoids strong binding of carbonaceous species. Employing electronic structure theory calculations, we screened the stability of multiple SAAs with 3d-5d transition metals atomically dispersed on a copper surface in terms of avoiding dopant aggregation and segregation. We then evaluated reactivities of the stable SAAs as catalysts for direct methane conversion to C2 products, including methane dehydrogenation and C-C coupling mechanisms. Combining selectivity analysis with kinetic modeling, we predicted that nickel dispersed on copper, i.e., Ni/Cu SAA, is a highly active and selective catalyst that can efficiently transform methane to ethylene. This work designs efficient SAA catalysts for direct methane activation and provides chemical insights into engineering compositions of SAAs to tune their catalytic performances.
Non-thermal plasma has unfolded highly efficient, safe to operate novel routes for methane conversion to hydrogen. In this work, methane conversion is performed under atmospheric dielectric barrier discharge (DBD) plasma with and without 13X zeolite-based catalysts i.e., 13X, Ga/13X, Pd/13X, and Pd-Ga/13X. Experimental results indicate that the plasma catalytic process delivered almost twofold higher product yield than the plasma only route. The binary Pd-Ga catalyst possesses highest catalytic performance with about 40 % CH 4 conversion at an input flowrate of 5 cm 3 min -1 and 2W due to the formation of the Pd-Ga alloy, which acts as catalytic active centre for activating C–H bonds. Product yield can be tailored by the catalyst design where the bimetallic Pd-Ga/13X preferably favours the hydrocarbon formation while H 2 is the dominant product obtained over the Pd/13X. The cleavage of C–H bonds of methane molecule over the plasma only route is mainly governed by energetic electrons in the gaseous phase the catalyst activity, and plasma-catalyst synergism play a significant role in the plasma catalysis process. Further, the findings from this work provide significant insights into the methane activation for subsequent optimization of the methane conversion processes operated on floating production, storage, and offloading vessels (FPSOVs). Exploiting untapped offshore natural gas reserves, where conventional pipeline systems are less economical.
Subsurface coal environments, where biogenic coal-to-methane conversion occurs, are difficult to access, resulting in inherent challenges and expenses for in situ experiments. Previous batch reactor studies provided insights into specific processes, pathways, kinetics, and engineering strategies, but field-relevance is restricted due to limited substrate availability or byproduct accumulation that may influence reactions or metabolisms. In this study, continuous-flow column reactors were used to overcome some batch limitations, improve the understanding of in situ conditions, and increase field-relevance for subsurface engineering technology development. The bench-scale reactor system was constructed to investigate the addition of algal amendment for enhancing microbial coal-to-methane conversion previously developed in batch systems. Four reactor columns were packed with coal and inoculated with a microbial consortium from the same Flowers-Goodale coal bed. Two reactors were amended with 13 C-labeled algal amendment on day 0, and two were unamended. On day 61, one previously amended and one previously unamended reactor were re-amended. Produced gases were captured in a gas trap, and CH 4 and CO 2 were quantified. The reactor amended twice produced 1712.6 µmol CH 4 (4.6% as 13 CH 4 ). The reactor amended only on day 0 produced 1485.5 µmol CH 4 (2.6% as 13 CH 4 ). The reactor amended only on day 61 produced 278.9 µmol CH 4 (3.9% as 13 CH 4 ). The reactor with no amendment produced no measurable gases for the duration of the 172-day experiment. Amendment increased the rate of coal-to-methane conversion and total gas production; most of the produced gases were due to coal conversion with only small contributions (<7%) from amendment conversion.
Pt and PtSn catalysts supported on SiO 2 and H-ZSM-5 were studied for methane conversion under nonoxidative conditions. Addition of Sn to Pt/SiO 2 increased the turnover frequency for production of ethylene by a factor of 3, and pretreatment of the catalyst at 1123 K reduced the extent of coke formation. Pt and PtSn catalysts supported on H-ZSM-5 zeolite were prepared to improve the activity and selectivity to non-coke products. Ethylene formation rates were 20 times faster over a PtSn(1:3)/H-ZSM-5 catalyst with SiO 2 :Al 2 O 3 = 280 in comparison to those over PtSn(3:1)/SiO 2 . H-ZSM-5-supported catalysts were also active for the formation of aromatics, and the rates of benzene and naphthalene formation were increased by using more acidic H-ZSM-5 supports. These catalysts operate through a bifunctional mechanism, in which ethylene is first produced on highly dispersed PtSn nanoparticles and then is subsequently converted to benzene and naphthalene on Brønsted acid sites within the zeolite support. The most active and stable PtSn catalyst forms carbon products at a rate, 2.5 mmol of C/((mol of Pt) s), which is comparable to that of state-of-the-art Mo/H-ZSM-5 catalysts with same metal loading operated under similar conditions (1.8 mmol of C/((mol of Mo) s)). Scanning transmission electron microscopy measurements suggest the presence of smaller Pt nanoparticles on H-ZSM-5-supported catalysts, in comparison to SiO 2 -supported catalysts, as a possible source of their high activity. As a result, a microkinetic model of methane conversion on Pt and PtSn surfaces, built using results from density functional theory calculations, predicts higher coupling rates on bimetallic and stepped surfaces, supporting the experimental observations that relate the high catalytic activity to small PtSn particles.
Direct non-oxidative methane (CH 4 ) conversion to value-added hydrogen (H 2 ) and C 2 products remains hindered by fundamental catalytic scaling constraints and rapid surface deactivation at elevated temperatures. Plasma-enabled catalysis offers a promising route to overcome the thermodynamic and kinetic barriers of direct non-oxidative methane upgrading at mild conditions, yet control over C–C product selectivity and catalyst stability remains elusive. Here, we establish a unified mechanistic framework including Langmuir–Hinshelwood (L–H) and Langmuir–Rideal (L–R) mechanisms that disentangles the roles of plasma excitation (including vibrationally activated species and radicals), surface temperature (T sur ), and catalyst binding energy in steering CH 4 conversion to H 2 and C 2 hydrocarbons. Through a combination of density functional theory (DFT) informed microkinetic modeling, in situ and ex situ surface characterization, and product quantification under dielectric barrier discharge conditions, we show that vibrationally excited CH 4 lowers activation barriers selectively for dissociative chemisorption, enabling surface activation across a wide range of transition metal catalysts at low thermal energy input. We find that once CH 4 is dissociatively chemisorbed, the branching between C 2 H 2 , C 2 H 4 , and C 2 H 6 is governed by surface properties (carbon binding energy, T sur , etc), regardless of plasma excitation. The DFT informed microkinetic model decouples the effects of molecular activation from surface properties and indentifies operating windows that maximize target yields while suppressing carbon accumulation and subsequent catalytic inactivation. Experiments on polycrystalline Cu/Al 2 O 3 , Ni/Al 2 O 3 , and Pt/Al 2 O 3 validate these predictions, revealing catalyst-dependent branching toward ethane or ethylene and distinct deactivation profiles. We unify these trends into a generalized three-dimensional plasma-thermal-catalytic design space, from which reduced descriptors such as T vib /T sur in the limit of vibrationally excited L–H pathways emerge as predictive metrics. These results enable rational tuning of methane conversion pathways and unlock selective C 2 formation using earth-abundant metals under mild plasma conditions.
A facile microwave-assisted synthesis was developed for the tunable fabrication of a novel Cu@IrO 2 core@shell nanowire motif. Experimental parameters, such as (i) reaction time, (ii) the method of addition of the Ir precursor, (iii) capping agent, (iv) reducing agent, as well as (v) the capping agent-to-reducing agent ratio, were subsequently optimized. The viability of other methods based on previously reported literature, such as refluxing, stirring, and physical sonication, was studied and compared with our optimized microwave-assisted protocol in creating our as-prepared materials. It should be noted that the magnitude of the IrO 2 shell could be tailored based on varying the Cu: Ir ratio coupled with judicious variations in the amounts of capping agent and reducing agent. Structural characterization techniques, such as XRD, XPS, and HRTEM (including HRTEM-EDS), were used to analyze our Cu@IrO 2 motifs. Specifically, the shell could be reliably tailored from sizes of 10 nm, 8 nm, 6 nm, and 3.5 nm with corresponding Cu: Ir ratios of 10:1, 15:1, 20:1, and 25:1, respectively. Moreover, the structural integrity of the motifs was probed and found to have been maintained after not only heat treatment but also the post-methane conversion process, indicative of an intrinsically high stability. Both components within the CuO-IrO 2 interface were able to activate methane at temperatures between 400 to 500 K with a reduction of the associated metal cations (Cu 2+ → Cu 1+ ; Ir 4+ → Ir 3+ ) and the deposition of CH x fragments on the surface, as clearly observed in the ambient-pressure XPS results. Thus, on the basis of their stability and chemical activity, these core-shell materials could be very useful for the catalytic conversion of methane into 'higher value" chemicals.
Described are methods for converting methane to olefins, aromatics, or a combination thereof using a single atom catalyst comprising CeO2 nanoparticles impregnated with individual atoms of noble metals including Pt, Pd, Rh, Ru, Ag, Au, Ir, or a combination thereof. These single atom catalysts of the present invention are heated with methane to form olefins and aromatics.
The concern over greenhouse gases, methane (CH 4 ) and carbon dioxide (CO 2 ), is increasing rapidly. There have been strides to find solutions to this global issue but there is not a clear path to a successful end goal. The concentration of CH 4 and CO 2 in the atmosphere has increased significantly over the last 60 years, methane is a great source of concern due to its ability to trap a high amount of heat in the atmosphere. These greenhouse gases contribute to global warming which has caused changes in the environment, including the melting of ice caps, and altered weather patterns. Solutions for these pressing challenges have led to different avenues of methane mitigation one of which is the development of solid-state bioreactors. These reactors harness the power of biological species that have evolved to use methane as an energy source. These methanotrophs, Methylomicrobium buryatense (5GB1), have been known to produce acetate and formate as a byproduct of the methane consumption cycle. The development of Hollow Scaffold Solid State Bioreactors (HS-SSBR) utilizes these microorganisms by way of hydrogel immobilization and infiltration of 3D printed scaffolds. The scaffolds act as a substrate for methanotroph growth and methane interaction. Methane consumption was monitored by way of gas sensors which indicated a reduction in methane concentration during the first 4 hours of closed loop methane recirculation. The byproducts of formate and acetate were confirmed by way of 1 H-NMR which indicated the 5GB1 methanotrophs were producing these molecules as a result of methane consumption.
Currently, coal bed methane (CBM) wells have a limited lifetime since the rate of methane removal via the installed wells is much faster than the in situ methane production rates. Along with water issues created by large amounts of CBM production water, the short life span of CBM wells is a huge deterrent to the environmental and economic feasibility of CBM production. The process of biogenic methanogenesis can be enhanced via the stimulation of the associated microbial communities that can convert the organic fractions of coal to methane. This process is termed Microbially-Enhanced Coal Bed Methane (MECBM). However, the rates of methane production are still limited and long incubation times are necessary. We hypothesized that the elucidation of chemical and biological parameters that limited MECBM together with thermodynamic considerations would inform strategies to optimize the process under flow conditions. We incorporated microbiological, physicochemical, and engineering processes to develop a more sustainable CBM production scheme with native coal and native microorganisms. The proposed combination of microbial ecology and physiology as well as optimized engineering principles minimized key constraints that impact microbial coal conversion to methane under environmentally relevant conditions. The combined approach for bench-scale tests resulted in more effective and less environmentally burdensome coal-dependent methane production with the potential for H 2 O and CO 2 management.
Researchers at NREL leveraged the recent on-site development of gas fermentation capabilities and novel genetic tools to directly convert methane to lactic acid using an engineered methanotrophic bacterium. The results provide proof-of-concept data for a gas-to-liquids bioprocess that concurrently produces fuels and chemicals from methane. NREL researchers developed genetic tools to express heterologous genes in methanotrophic organisms, which have historically been difficult to genetically engineer. Using these tools, researchers demonstrated microbial conversion of methane to lactate, a high-volume biochemical precursor predominantly utilized for the production of bioplastics. Methane biocatalysis offers a means to concurrently liquefy and upgrade natural gas and renewable biogas, enabling their utilization in conventional transportation and industrial manufacturing infrastructure. Producing chemicals and fuels from methane expands the suite of products currently generated from biorefineries, municipalities, and agricultural operations, with the potential to increase revenue and significantly reduce greenhouse gas emissions.
Not Available