SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A tunable CW laser has been used to selectively remove either of the two metastable species, 3P 0,2, which are initially present in a neon metastable beam. The method is applicable to other rare gases and provides the opportunity for separate investigation of effects due to atoms in either the 3P 0 or 3P 2 state.
In moderate-pressure radio frequency (RF) capacitively coupled plasmas generated in argon–methane mixtures, the density of argon metastable atoms (Ar 1 s 5 ) exhibits a non-monotonic dependence on methane (CH 4 ) concentration. Laser-induced fluorescence (LIF) was used to measure and compare local Ar 1 s 5 densities in Ar and Ar–CH 4 plasmas at 2.6 Torr and RF powers of 17–117 W. The addition of 1% CH 4 increases the metastable density, and 2% CH 4 triggers a strong depletion by an order of magnitude, compared to 1% CH 4 case. This non-monotonic behavior demonstrates the sensitivity of metastable populations to small gas admixtures, which is critical for processes where metastables drive precursor dissociation. For real-time monitoring of metastable population, broadband optical emission spectroscopy (OES) is augmented with a feedforward neural network (NN) to predict Ar s1 5 densities from spectral features. When trained on LIF data, the NN replicates the absolute densities and the dynamic trends of Ar 1 s 5 density variation. The NN-augmented broadband OES approach can be used as a simple and cost-effective tool for tracking Ar metastables in Ar-rich plasmas, facilitating industrial-scale optimization.
Metastable fragments produced by electron impact excitation of CH4 have been investigated for incident electron energies from threshold to 300 eV. Only metastable hydrogen and carbon atoms were observed. Onset energies for the production of metastable hydrogen atoms were observed at electron impact energies of 22.0 + or - .5 eV, 25.5 + or - .6 eV, 36.7 + or - .6 eV and 66 + or - 3 eV, and at 26.6 + or - .6 eV for the production of metastable carbon atoms. Most of the fragments appear to have been formed in high-lying Rydberg states. The total metastable hydrogen cross section reaches a maximum value of approximately 1 X 10 to the minus 18th power sq cm at 100 eV. At the same energy, the metastable carbon cross section is 2 x 10 to the minus 19th power sq cm.
Metastable phases can exist within local minima in the potential energy landscape when they are kinetically “trapped” by various processing routes, such as thermal treatment, grain size reduction, chemical doping, interfacial stress, or irradiation. Despite the importance of metastable materials for many technological applications, little is known about the underlying structural mechanisms of the stabilization process and atomic-scale nature of the resulting defective metastable phase. Investigating ion-irradiated and nanocrystalline zirconia with neutron total scattering experiments, we show that metastable tetragonal ZrO 2 consists of an underlying structure of ferroelastic, orthorhombic nanoscale domains stabilized by a network of domain walls. The apparent long-range tetragonal structure that can be recovered to ambient conditions is only the configurational ensemble average of the underlying orthorhombic domains. This structural heterogeneity with a distinct short-range order is more broadly applicable to other nonequilibrium materials and provides insight into the synthesis and recovery of functional metastable phases with unique physical and chemical properties.
Production of hydrogen and carbon atoms in metastable and high-lying Rydberg states by electron-impact dissociation of methane and deuterated methane is investigated for incident electron energies ranging from threshold values to 300 eV. Threshold energies for five different processes resulting in metastable hydrogen and carbon atoms are determined in the energy range from 20 to 70 eV, and it is shown that metastable hydrogen atoms are produced in four of these collisional processes while metastable carbon atoms are produced in the other. The nature of each collisional process is described, differential cross sections are derived for the dissociative excitation of both types of atoms to metastable and high-Rydberg states at 100 eV, and the onset energy for UV photon production is measured. Much of the data is interpreted in terms of the ion core model suggested by Kupriyanov (1968) and developed by Freund (1971).
The abundances of a variety of metastable isomers of small organic molecules, analogous to HNC/HCN, in dense interstellar clouds are considered. These metastable species, some of which are thought to exist as intermediates in laboratory organic chemical reactions, are of considerable interest to chemists. Current ideas of gas-phase, ion-molecule chemistry are utilized to demonstrate that such metastable species should often be present in dense clouds in sufficient abundance to be observed. Unfortunately, the spectral constants of metastable isomers have rarely been determined in the laboratory, and quantum chemical calculations of a varying degree of accuracy must be utilized; results are included of some new quantum chemical calculations. The interstellar chemistry and expected microwave spectra of a representative sample of possibly important interstellar metastable isomers are discussed.
Electron beams with an applied magnetic field generate a secondary cold plasma with a selective chemical composition, featuring low-energy ions and metastable species in the discharge periphery, ideal for low-damage plasma treatment of material substrates. In this work, we studied the plasma generated by an e-beam using a 4 kV voltage in a pure argon gas environment under a magnetic field of 150 G and in the pressure range of 25–90 mTorr. We measured the absolute spatial density profile of argon (1 s 5 ) metastables in an electron beam generated plasma by laser-induced fluorescence and found it to be of the order of 10 16 m −3 . The electron temperature and the electron density measured by a Langmuir probe were of the order of 10 16 m −3 and less than an eV respectively. Electron-impact quenching was identified as a significant loss mechanism for the Ar(1s 5 ) state, leading to the saturation of the metastable density at higher pressures. Outside the primary ionization region, the spatial distribution of argon metastables followed a linear diffusion profile, indicating negligible additional production in those regions.
Here, we demonstrate excitation of metastable krypton and xenon beams using a vacuum ultraviolet lamp and directly compare the performance of this method to metastable excitation based on a radio-frequency-driven plasma discharge. In our apparatus, lamp-based metastable excitation outperforms the plasma discharge across a wide range of beam flux values relevant for atom trap trace analysis (ATTA). Moreover, we do not observe significant degradation in lamp performance after over 160 h of operation. We find that lamp-based excitation is particularly advantageous at the smallest and largest beam fluxes tested, demonstrating the utility of this approach both for improving krypton ATTA and for enabling the detection of radioactive xenon isotopes using ATTA. Finally, we demonstrate an additional enhancement to lamp-based metastable excitation efficiency and stability by applying an external magnetic field.
Motivated by explosive releases of energy in fusion, space and astrophysical plasmas, we consider the nonlinear stability of stratified magnetohydrodynamic equilibria against two-dimensional interchanges of straight magnetic-flux tubes. We demonstrate that, even within this restricted class of dynamics, the linear stability of an equilibrium does not guarantee its nonlinear stability: equilibria can be metastable. We show that the minimum-energy state accessible to a metastable equilibrium under non-diffusive two-dimensional dynamics can be found by solving a combinatorial optimisation problem. These minimum-energy states are, to good approximation, the final states reached by our simulations of destabilised metastable equilibria for which turbulent mixing is suppressed by viscosity. To predict the result of fully turbulent relaxation, we construct a statistical mechanical theory based on the maximisation of Boltzmann's mixing entropy. This theory is analogous to the Lynden-Bell statistical mechanics of collisionless stellar systems and plasma, and to the Robert–Sommeria–Miller theory of two-dimensional vortex turbulence. Our theory reproduces well the results of our numerical simulations for sufficiently large perturbations to the metastable equilibrium.
Mechanochemistry and mechanocatalysis are gaining increasing attention as environmentally friendly chemical processes because of their solvent-free nature and scalability. Significant effort has been devoted for studying continuum-scale phenomena in mechanochemistry, such as temperature and pressure gradients, but the atomic-scale mechanisms remain relatively unexplored. In this work, we focus on the mechanochemical reduction of MoO3 as a case study. We use experimental techniques to determine the mechanochemical reduction conditions and density functional theory (DFT) simulations to establish an atomistic framework for identifying the metastable surfaces that are most likely to enable this process. Our results show that metastable surfaces can significantly lower or remove thermodynamic barriers for surface reduction and that kinetic energy from milling can facilitate the formation of metastable surfaces that have high surface fracture energies and are not thermally accessible. These findings indicate that metastable surfaces are an important aspect of mechanochemistry along with hot spots and other continuum-scale phenomena.
Abstract Experimental challenges in determining the phase diagram of carbon at temperatures and pressures near the graphite-diamond-liquid triple point are often related to the persistence of metastable crystalline or glassy phases, superheated crystals, or supercooled liquids. A deeper understanding of the crystallisation kinetics of diamond and graphite is crucial for effectively interpreting the outcomes of these experiments. Here, we reveal the microscopic mechanisms of diamond and graphite nucleation from liquid carbon through molecular simulations with first-principles machine learning potentials. Our simulations accurately reproduce the experimental phase diagram of carbon near the triple point and show that liquid carbon crystallises spontaneously upon cooling. Metastable graphite crystallises in the domain of diamond thermodynamic stability at pressures above the triple point. Furthermore, whereas diamond crystallises through a classical nucleation pathway, graphite follows a two-step process in which low-density fluctuations forego ordering. Calculations of the nucleation rates of the two competing phases confirm this result and reveal a manifestation of Ostwald’s step rule, where the strong metastability of graphite hinders the transformation to the stable diamond phase. Our results provide a key to interpreting melting and recrystallisation experiments and shed light on nucleation kinetics in polymorphic materials with deep metastable states.
Among the key features for next-generation memory devices is the need for high-contrast switching between metallic and insulating states with fast switching speed and long lifetime. However, materials exhibiting such properties are rare, and their electronic structure is often poorly understood. Here, by combining state-of-the-art devices with angle-resolved photoemission spectroscopy, we study the emergence of a metastable metallic state from the insulating ground state in the charge-density wave (CDW) material 1T-TaS 2 after applying short current pulses. Analysis of the electronic structure suggests a picture in which 1T-TaS 2 transforms from a band insulator in the commensurate CDW ground state to a correlated metal in the metastable state. Moreover, the optically induced metastable state reveals a strong similarity to the current-induced one. This work provides an extensive characterization of metastable order in 1T-TaS 2 and proves how studying electronic properties under in-operando conditions is a critical step for next-generation devices.
High-pressure β -Sn germanium may transform into diverse metastable allotropes with distinctive nanostructures and unique physical properties via multiple pathways under decompression. However, the mechanism and transition kinetics remain poorly understood. Here, we investigate the formation of metastable phases and nanostructures in germanium via controllable transition pathways of β -Sn Ge under rapid decompression at different rates. High-resolution transmission electron microscopy reveals three distinct metastable phases with the distinctive nanostructures: an almost perfect st12 Ge crystal, nanosized bc8/r8 structures with amorphous boundaries, and amorphous Ge with nanosized clusters (0.8–2.5 nm). Fast in situ x-ray diffraction and x-ray absorption measurements indicate that these nanostructured products form in certain pressure regions via distinct kinetic pathways and are strongly correlated with nucleation rates and electronic transitions mediated by compression rate, temperature, and stress. This work provides deep insight into the controllable synthesis of metastable materials with unique crystal symmetries and nanostructures for potential applications.
Evidence is presented that some previous studies of reactions of O(2+) ions with various atoms and molecules referred to ion samples composed in part of ions in metastable (1D and/or 1S) states. This finding resolves the 3 orders of magnitude discrepancy between previous experimental and calculated rate coefficients for the O(2+)(3P) + He charge transfer process. Using a drift tube to distinguish, via arrival time differences, groundstate O(+)(3P) and metastable ions, a rate coefficient of (3.5 plus or minus 1.5) x 10 to the -11th cu cm/sec is obtained for the reaction, in good agreement with that obtained from ab initio theoretical calculations. Previous conclusions concerning reactions of O(2+) with O2 and N2, however, remain valid since the difference in reactivity of ground-state and metastable O(2+) ions appears to be negligible in this case. The rate coefficient for the reaction O(2+) + CO2 has been determined to be (2 plus or minus 0.5) x 10 to the -9th cu cm/sec for ions either in the ground-state or in metastable states.
The pressure–temperature phase behavior of covalent disordered solids such as amorphous silicon and germanium is complex. Questions remain on possible glass transitions, on polyamorphism via amorphous–amorphous transitions, on connections with liquid–liquid transitions, on structure-behavior relationships, and on their potential as precursor for novel methods for material discovery. Here we demonstrate experimentally the nucleation of a metastable, four-fold coordinated rhombohedral r8 phase from pure amorphous silicon and germanium upon room temperature compression at pressures below 10 GPa. Accompanying theory reveals a strong pressure-driven distortion of the bond angle transforming the starting tetrahedral low-density amorphous network to a distorted four-fold coordinated medium-density state. This state is of lower density than metallic high-density networks, resembles the crystalline r8 phase and initiates its nucleation. Our finding shows that polyamorphism is not the only possible transformation mode for these amorphous solids and that instead nucleation of interesting functional phases at potentially useful pressures is possible. Such novel access modes to metastable structures are critical for future exploitability and could be useful for other tetrahedral materials including carbon, where the related (bc8) post-diamond phase remains elusive. Our observed density match between an amorphous and a metastable crystalline phase clearly allows for a new phase transition pathway, while corresponding theory demonstrates how carefully validated atomistic simulations can guide prediction, discovery and synthesis of novel material structures.
An atomic-level understanding of the underlying structural metastability is still absent in halide perovskite photovoltaic systems. Focusing on the model material CsPbBr 3 , the impact of mechanically induced atomic structure alteration is elucidated through structural modeling and X-ray diffraction measurements. Sudden Cs–Br bond breaking drives the system metastability, where the first-order transition arises from cation-halide bond strain relief by severing the corner connectivity of the PbBr 6 units. The pressure–volume and entropy terms govern the Gibbs free-energy landscape in halide perovskites. In conclusion, metastability is revealed as a critical factor limiting the performance of lead halide perovskites under extreme but natural environments.
Optically excited quantum materials exhibit non-equilibrium states with remarkable emergent properties, but these phenomena are usually transient, decaying on picosecond timescales and limiting practical applications. Advancing the design and control of non-equilibrium phases requires the development of targeted strategies to achieve long-lived, metastable phases. Here, in this study, we report the discovery of symmetry-protected electronic metastability in the model cuprate ladder Sr 14 Cu 24 O 41 . Using femtosecond resonant X-ray scattering and spectroscopy, we show that this metastability is driven by a transfer of holes from chain-like charge reservoirs into the ladders. This ultrafast charge redistribution arises from the optical dressing and activation of a hopping pathway that is forbidden by symmetry at equilibrium. Relaxation back to the ground state is, hence, suppressed after the pump coherence dissipates. Our findings highlight how dressing materials with electromagnetic fields can dynamically activate terms in the electronic Hamiltonian, and provide a rational design strategy for non-equilibrium phases of matter.
Metal-organic frameworks (MOFs) are emerging as unconventional precursors for nanoparticle synthesis, with potential to leverage their tunable structures and chemistry to achieve nanomaterials with structures and compositions inaccessible via traditional synthetic routes. Here we use in situ synchrotron X-ray diffraction and pair distribution function (PDF) measurements to investigate how the dynamic structure of MOFs at the edge of stability influences their transformation into different metastable polymorphs. Our study reveals that the local structural features of metal-oxo MOF nodes at elevated temperatures are linked to the resulting nanoparticle structures formed under mild conditions. Focusing on the titanium-based MOF MIL-125, we demonstrate that manipulating the chemical environment to facilitate transformation of the Ti8 node geometry promotes formation of metastable, nanometer-scale TiO2 brookite rather than the more common anatase and rutile TiO2 polymorphs typically produced through MOF pyrolysis at high temperature. These findings highlight the potential to harness the MOF topology and chemical environment to design and control node distortions and enable access to exotic metastable nanoparticle states.