SEARCH · Engineering Papers
Results for “magnesium intercalation”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Novel Structural Motif To Promote Mg-Ion Mobility: Investigating ABO 4 Zircons as Magnesium Intercalation Cathodes
There is an increasing need for sustainable energy storage solutions as fossil fuels are replaced by renewable energy sources. Multivalent batteries, specifically Mg batteries, are one energy storage technology that researchers continue to develop with hopes to surpass the performance of Li-ion batteries. However, the limited energy density and transport properties of Mg cathodes remain critical challenges preventing the realization of high-performance multivalent batteries. In this work, ABO 4 zircon materials (A = Y, Eu and B = V, Cr) are computationally and experimentally evaluated as Mg intercalation cathodes. Remarkably good Mg-ion transport properties were predicted and Mg-ion intercalation was experimentally verified in sol-gel synthesized zircon YVO 4 , EuVO 4 , and EuCrO 4 . Among them, EuVO 4 exhibited the best electrochemical performance and demonstrated repeated reversible cycling. While we believe that the one-dimensional diffusion channels and redox-active species tetragonal coordination limit the value of many zircons as high-performance cathodes, their unique structural motif of overlapping polyhedra along the diffusion pathway appears instrumental for promoting good Mg-ion mobility. The motif results in a favorable "6-5-4" change in coordination that avoids unfavorable sites with lower coordination along the diffusion pathway and a structural design metric for future Mg cathode development.
Comparison of physical and chemical vapor deposition for magnesium intercalation underneath epitaxial graphene
Not provided.
Effect of relative humidity on the interlayer spacing of phosphate intercalated Mg, Al layered double hydroxide (hydrotalcite‐like) crystals
Abstract The availability of water and the type of interlayer anions present affect the arrangement and interlayer spacing of layered double hydroxide (LDH). A systematic study of the effect of relative humidity (RH) on the basal spacing of phosphate intercalated, magnesium aluminum LDHs (MgAl–PO 4 LDH) was conducted, confirming that MgAl‐PO 4 LDH exhibit distinct interlayer spacing corresponding to separate low‐ and high‐hydration states produced when exposed to low and high humidity conditions. The transition from the low‐ to high‐hydration form begins when RH exceeds 33% and is accompanied by the transition from one to two interlayers of water. An improved understanding of the effect of RH on MgAl–PO 4 LDHs will enable more accurate atomistic modeling and experimental characterization of MgAl–PO 4 LDHs and may lead to improvements in the tunability of MgAl‐PO 4 LDHs for commercial applications such as slow‐release fertilizer.
Intercalation mechanism of solvated magnesium electrolytes on spinel cathode surfaces
Not Available
How machine learning can extend electroanalytical measurements beyond analytical interpretation
Electroanalytical measurements are routinely used to estimate material properties exhibiting current and voltage signatures. Analysis of such measurements relies on analytical expressions of material properties to describe the experiments. The need for analytical expressions limits the experiments that can be used to measure properties as well as the properties that can be estimated from a given experiment. Such analytical relations are essentially solutions of the physics-based differential equations (with properties as coefficients) describing the material behavior under certain specific conditions. In recent years, a new machine learning-based approach has been gaining popularity wherein the differential equations are numerically solved to interpret the electroanalytical experiments in terms of corresponding material properties. Since the physics-based differential equations are solved, one can additionally estimate underlying fields, e.g., concentration profile, using such an approach. To exemplify the characteristics of such a machine learning assisted interpretation of electroanalytical measurements, we use data from the Hebb–Wagner test on a magnesium spinel intercalation host. In conclusion, as compared to the traditional analytical expression-based interpretation, the emerging approach decreases experimental efforts to characterize relevant material properties as well as provides field information that was previously inaccessible.
Formation and chemical reactivity of carbon fibers prepared by defluorination of graphite fluoride
Defluorination of graphite fluoride (CFX) by heating to temperatures of 250 to 450 C in chemically reactive environments was studied. This is a new and possibly inexpensive process to produce new carbon-based materials. For example, CF 0.68 fibers, made from P-100 carbon fibers, can be defluorinated in BrH2C-CH = CH-CH2Br (1,4-dibromo-2butene) heated to 370 C, and graphitized to produce fibers with an unusually high modulus and a graphite layer structure that is healed and cross-linked. Conversely, a sulfur-doped, visibly soft carbon fiber was produced by defluorinating CF 0.9 fibers, made from P-25, in sulfur (S) vapor at 370 C and then heating to 660 C in nitrogen (N2). Furthermore, defluorination of the CF 0.68 fibers in bromine (Br2) produced fragile, structurally damaged carbon fibers. Heating these fragile fibers to 1100 C in N2 caused further structural damage, whereas heating to 150 C in bromoform (CHBr3) and then to 1100 C in N2 healed the structural defects. The defluorination product of CFX, tentatively called activated graphite, has the composition and molecular structure of graphite, but is chemically more reactive. Activated graphite is a scavenger of manganese (Mn), and can be intercalated with magnesium (Mg). Also, it can easily collect large amounts of an alloy made from copper (Cu) and type 304 stainless steel to form a composite. Finally, there are indications that activated graphite can wet metals or ceramics, thereby forming stronger composites with them than the pristine carbon fibers can form.
Intercalation-Induced Amorphization Boosts Aqueous Magnesium-Ion Storage
The design of aqueous battery cathode materials that can store divalent ions with high capacity and satisfactory reversibility is of great technical importance and challenge. Here, we report that divalent Mg 2+ storage is facilitated by an intercalation-induced amorphization of vanadate electrode materials. Electrokinetic analyses and in situ synchrotron X-ray diffraction and absorption spectroscopy collectively demonstrate that vanadate layered materials (Li–V 3 O 8 ) undergo a structural transformation to amorphization induced by Mg 2+ intercalation, and a reversible restoration of crystalline structure upon Mg 2+ deintercalation. Debye scattering simulations suggest that intercalation-induced turbostratic disorder, especially random rotations, translational shifts, oscillatory motions, or varied interlayer spacing of adjacent V–O molecular layers, could be responsible for the observed amorphization. The highly distorted local structure, in turn, facilitates Mg 2+ intercalation across the vanadate electrode materials, responsible for nearly 3/7 of the total Mg 2+ ions intercalated. The study presented reveals an intriguing relationship between ion transport and the reversible amorphization-to-crystallization dynamics it induces, opening a paradigm for designing advanced aqueous battery electrodes.
Strain-Driven Surface Reactivity in Magnesium-Ion Battery Cathodes
Successful deployment of a Mg-ion battery requires cathodes that can achieve reversible Mg intercalation and high energy density. Recent theoretical and experimental studies indicated that the overall transport is likely limited by sluggish Mg transport at the cathode-electrolyte interface and not Mg diffusion through bulk. Here, in this work, we investigated the surface electrochemical activity of Mg ions by using a spinel-structured manganese oxide thin-film model system and in situ X-ray scattering. In combination with post-mortem microscopy analysis, we found that magnesium insertion was more favorable than subsequent extraction near the surface of the Mg x Mn 2 O 4 film, resulting in overmagnesiation, and eventually amorphization of the surface. This structural irreversibility and high overpotential required for Mg extraction could explain significant voltage hysteresis and Mg surface enrichment previously observed in bulk cathodes. Density functional theory calculations suggested that the tendency for the Mg surface enrichment could be associated with Mg diffusion kinetics, which varies with the strain state evolved due to constrained film volume change during Mg insertion and extraction. Particularly, out-of-plane Mg migration was predicted to be favorable in the tensile strain rather than in the compressive case.
Structural and chemical evolutions of a magnesium vanadium oxide cathode under electrochemical cycling in magnesium batteries
The design of cathode materials that remain chemically and structurally stable during repetitive ion insertion and extraction poses a significant challenge in developing multivalent batteries. The cycling stability of traditional metal oxide-based cathode is challenged by sluggish diffusion of multivalent cations and parasitic reactivity at interfacial regimes, including the cathode electrolyte interphase layer (CEI). Understanding the reactions at the cathode-electrolyte interface, particularly those induced by non-stoichiometric surface layers, is a crucial design parameter for both cathode materials and electrolytes. Here, in this study, we employed multimodal analysis, including in situ and ex situ X-ray photoelectron spectroscopy (XPS), high resolution transmission electron microscopy (TEM) and electrochemical impedance spectroscopy (EIS) to examine the surface reactions and subsequent structural and chemical evolutions of the CEI on high voltage magnesium vanadium oxide (MgV 2 O 4 ) spinel cathode during the Mg 2+ insertion/extraction processes. The results revealed that the presence of non-stoichiometric surface layers in the magnesium vanadium oxide cathode drive the decomposition of bis(trifluoromethanesulfonyl)imide (TFSI - ) anion, leading to the formation of the CEI layer. The CEI layer could inhibit the Mg 2+ ion transfer processes. Accompanying this reactivity-driven degradation, the magnesium vanadium oxide cathode undergoes pulverization, forming clusters of nanosized particles. This process likely improves cycling ability by creating new intercalation sites and shortening the diffusion pathway for the Mg 2+ cations. This study demonstrates that controlling surface stoichiometry and engineering morphological properties are critical design parameters for high performance cathodes for multivalent batteries.
Chemical preintercalation of magnesium ions into ⍺-MoO 3 structure for improved electrochemical stability in Li-ion cells
Chemical preintercalation of layered materials, used as electrodes in intercalation-based energy storage devices, represents a promising strategy to enhance electrochemical stability and extend cycle life. However, standardized synthesis approaches for the chemical preintercalation of diverse ions into various layered materials are lacking, necessitating the development of specific synthesis routes for each ion and layered phase combination. In this study, we present the first successful demonstration of Mg 2+ ion chemical preintercalation into the interlayer region of α-MoO 3 , revealing its stabilizing effect during cycling in non-aqueous Li-ion cells. Using ethanol during hydrothermal treatment facilitated molybdenum reduction, which was critical for Mg 2+ ion preintercalation. Interestingly, we found that Mg preintercalation was accompanied by the incorporation of water. Mg-preintercalated α-MoO 3 exhibited enhanced charge storage capacity, electrochemical stability, and power capability compared to pristine α-MoO 3 electrodes. This improved performance is attributed to the structural stabilization provided by Mg 2+ pillars, which prevent undesirable phase transformations during repeated Li intercalation/deintercalation, and increased Li + ion diffusion due to the shielding of electrostatic interactions between electrochemically cycled ions and the α-MoO 3 lattice, enabled by structural water. In conclusion, our study offers new insights into developing chemical preintercalation synthesis approaches that can be broadly applied to a wide range of pillaring ions and layered material hosts.
Unconventional Charge Transport in MgCr 2 O 4 and Implications for Battery Intercalation Hosts
Ion transport in solid-state cathode materials prescribes a fundamental limit to the rates batteries can operate; therefore, an accurate understanding of ion transport is a critical missing piece to enable new battery technologies, such as magnesium batteries. Based on our conventional understanding of lithium-ion materials, MgCr 2 O 4 is a promising magnesium-ion cathode material given its high capacity, high voltage against an Mg anode, and acceptable computed diffusion barriers. Electrochemical examinations of MgCr 2 O 4 , however, reveal significant energetic limitations. Motivated by these disparate observations; herein, we examine long-range ion transport by electrically polarizing dense pellets of MgCr 2 O 4 . Our conventional understanding of ion transport in battery cathode materials, e.g., Nernst-Einstein conduction, cannot explain the measured response since it neglects frictional interactions between mobile species and their nonideal free energies. In this work, we propose an extended theory that incorporates these interactions and reduces to the Nernst-Einstein conduction under dilute conditions. This theory describes the measured response, and we report the first study of long-range ion transport behavior in MgCr 2 O 4 . We conclusively show that the Mg chemical diffusivity is comparable to lithium-ion electrode materials, whereas the total conductivity is rate-limiting. Given these differences, energy storage in MgCr 2 O 4 is limited by particle-scale voltage drops, unlike lithium-ion particles that are limited by concentration gradients. Future materials design efforts should consider the interspecies interactions described in this extended theory, particularly with respect to multivalent-ion systems and their resultant effects on continuum transport properties.
Expanding the Material Search Space for Multivalent Cathodes
Multivalent batteries are an energy storage technology with the potential to surpass lithium-ion batteries; however, their performance have been limited by the low voltages and poor solid-state ionic mobility of available cathodes. A computational screening approach to identify high-performance multivalent intercalation cathodes among materials that do not contain the working ion of interest has been developed, which greatly expands the search space that can be considered for material discovery. This approach has been applied to magnesium cathodes as a proof of concept, and four resulting candidate materials [NASICON V 2 (PO 4 ) 3 , birnessite NaMn 4 O 8 , tavorite MnPO 4 F, and spinel MnO 2 ] are discussed in further detail. In examining the ion migration environment and associated Mg 2+ migration energy in these materials, local energy maxima are found to correspond with pathway positions where Mg 2+ passes through a plane of anion atoms. While previous studies have established the influence of local coordination on multivalent ion mobility, these results suggest that considering both the type of the local bonding environment and available free volume for the mobile ion along its migration pathway can be significant for improving solid-state mobility.
Alkali‐Ion‐Assisted Activation of ε‐VOPO 4 as a Cathode Material for Mg‐Ion Batteries
Abstract Rechargeable multivalent‐ion batteries are attractive alternatives to Li‐ion batteries to mitigate their issues with metal resources and metal anodes. However, many challenges remain before they can be practically used due to the low solid‐state mobility of multivalent ions. In this study, a promising material identified by high‐throughput computational screening is investigated, ε‐VOPO 4 , as a Mg cathode. The experimental and computational evaluation of ε‐VOPO 4 suggests that it may provide an energy density of >200 Wh kg −1 based on the average voltage of a complete cycle, significantly more than that of well‐known Chevrel compounds. Furthermore, this study finds that Mg‐ion diffusion can be enhanced by co‐intercalation of Li or Na, pointing at interesting correlation dynamics of slow and fast ions.
Selective Covalent Basal Plane Modification as a Probe of Hydroxide Ion Conduction Pathways in Magnesium Aluminum Layered Double Hydroxides
Understanding ionic conduction in layered double hydroxides (LDHs) is a crucial step towards utilizing them as solid, hydroxide ion‐conducting electrolytes in energy conversion applications. We selectively modified the interlayer and external surfaces of MgAl LDHs with tris(hydroxymethyl)aminomethane (TRIS) ligands. By adjusting the concentration of the TRIS surface modifier, the LDH basal plane surfaces could be functionalized everywhere (internally and externally) or only externally. External modification resulted in loss of OH‐conductivity compared to pristine LDHs, confirming that external platelet surfaces are the primary ion conduction pathway.