Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “low temperature electrolysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

HydroGEN: Low Temperature Electrolysis

In low temperature electrolysis (LTE), it is imperative to both enhance and explore durability and demonstrate the opportunities for anion exchange membrane-based water electrolysis (AEMWE). The advantage of alkaline-based systems is primarily reduced capital cost: high pH enabling platinum group metal (PGM)-free catalysts and coatings, and the enhanced stability of those components compared to proton exchange membrane (PEM) -based systems. Compared to the water-only fed AEMWE in previous LTE 2.0 work, supporting electrolytes can allow for a significant improvement in performance through higher site-access and stability by reducing utilization and overpotential stresses that lead to catalyst layer delamination.

HYDROGEN↗
DOE OSTI2026

High-Throughput Uniformity and Defect Monitoring in Low-Temperature Electrolysis Porous Transport Layers Using X-Ray Radiography

Effective quality control (QC) for manufacturing proton exchange membrane water electrolysis (PEMWE) components is critical to enabling widespread adoption of the technology for hydrogen generation. This study investigates X-ray radiography as a novel, high-throughput, potentially in-line QC technique for detecting defects and assessing material property distributions in titanium-based porous transport layers (PTLs) which constitute a crucial component of low temperature PEMWE stacks. We obtain radiographs of a set of fifteen PTLs and model their absorbance of the broadband radiation as a second-order polynomial to account for the non-monoenergetic radiation source used in this study. The resulting model serves as a basis for predicting the areal density and porosity distributions of the PTLs. We find radiography successful in detecting multiple instances of defects, including holes/depressions, cracks, and excess material on the surface or in the pores of the material, demonstrating its potential as a robust in-line QC tool for PTL manufacturing.

08 HYDROGEN↗
DOE OSTI2024

State of the art in low-temperature and high-temperature electrolysis

Water electrolysis is gaining traction in large-scale applications, with production of multiple technologies scaling to hundreds and thousands of megawatts of new electrolyzer capacity annually. Low-temperature electrolysis has dominated the electrolyzer market for decades, but still only represents a small amount of the overall hydrogen market, due to the higher production costs versus hydrogen derived from fossil fuels. Advances are needed in capital cost and efficiency to close the cost gap, especially for energy applications. Similarly, while high-temperature electrolyzers can operate more efficiently, reducing the operating cost, they still need further scale-up and cost reduction to compete in these markets. Understanding the recent advances in each and the priority research directions is important to focus and accelerate innovation, and will be discussed in this article. The different advantages and disadvantages of each of these technologies will also be reviewed; there will likely be applications for each in the overall deployment of renewable hydrogen.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Overview of NETL’s Low Temperature CO2 Electrolysis Research

This keynote lecture will briefly overview diverse research areas of National Energy Technology Laboratory (NETL) to advance energy and environmental sustainability along with carbon management. Our electrochemistry efforts on carbon conversion directly support the US goal of achieving carbon-free power sector by 2035 and net zero emissions by 2050. Since CO2 electroreduction is highly structure-sensitive, NETL ongoing research has been focused on the rational design and engineering of electrocatalysts to facilitate the CO2 conversion to desirable products with good selectivity, activity, and durability. Different classes and types of electrocatalytic materials will be covered in this talk, from well-defined atomic-scale model catalysts to heterogenous, scalable powder systems at nano- and micro-scale for “real world” performance evaluation. Several spectroscopic, microscopic, and electrochemical characterization techniques along with computational findings will be additionally discussed to gain more insights into the structure-activity relation. The last part of this seminar will provide more detail on how NETL has transitioned from the most common aqueous H-type reactor for lab-scale validation to more realistic full electrolyzer cell in bench-scale prototype. The knowledge, electrocatalytic materials, and device validation achieved from NETL in-house research will be translated to industrial sector for large scale deployment and the anticipated outcome will help advance the development of low temperature CO2 electrolysis technologies.

Nguyen Phan, Thuy Duong↗
DOE OSTI2024

High-Performance AEM LTE with Advanced Membranes, Ionomers and PGM-Free Electrodes

Alkaline low temperature electrolysis (LTE) systems enjoy several potential advantages over acid-based LTE systems including facile oxygen evolution reaction (OER) kinetics and electrodes that can use little to no platinum group metals (PGM). The polymer membranes and membrane electrode assembly (MEA) structures going into alkaline electrochemical systems have seen significant advances in recent years. The objective of this project is to combine state-of-the-art alkaline polymer electrolyzer components into one optimized membrane electrode assembly (MEA) system to achieve DOE low temperature electrolysis (LTE) goals. The benefit of individual component advances cannot be fully appreciated until all aspects and components of the MEA are working at an equally high level of performance. New electrode fabrication methods were developed where solvent cast catalyst/ionomer solutions were used in place of insoluble ionomers to significantly improve adhesion. The membranes were improved in terms of durability and mechanical properties. The OER and HER catalysts were improved and made more durable.

08 HYDROGEN↗
DOE OSTI2026

Proton Conducting Silicon Oxide Membranes as a Fluorine Free Alternative to Nafion for Low Temperature Water Electrolysis

Driven by environmental and health concerns related to per- and polyfluoroalkyl substances (PFAS), there has been growing interest in developing fluorine-free proton (H + ) exchange membrane (PEM) materials for fuel cells and water electrolyzers. In this study, we present a side-by-side comparison of the key transport properties of submicron thick, PFAS-free amorphous silicon dioxide (SiO 2 ) membranes to Nafion, a fluorinated polymer electrolyte membrane that represents the industry standard for PEM fuel cells and electrolyzers. Here, measurements of proton (H + ) conductivity (σ H + ), hydrogen (H 2 ) permeability (P H 2 ), and electrical resistivity (ρ e – ) were conducted using model thin films comprised of SiO 2 membranes deposited by atomic layer deposition (ALD). Although the H + conductivity of the SiO 2 membranes is 2–3 orders of magnitude lower than Nafion, the addition of phosphorus dopants (PO x ) improves H + conductivity such that the area specific membrane resistance of thin (<50 nm) PO x -doped SiO 2 membranes is more than an order of magnitude lower than Nafion-117. Importantly, the safe operation of such nanoscale membranes within a PEM electrolyzer is feasible thanks to the low H 2 permeability of dense SiO 2 -based membranes, which are predicted to limit H 2 crossover rates to acceptable levels for pressures up to ≈ 100 bar. As a proof-of-principle demonstration, a chip-scale water electrolyzer based on 100 nm thick PO x -SiO 2 membrane is shown to achieve a current density of 2 A cm –2 at a potential of 2.5 V. If this technology can be successfully scaled up, H + conducting oxide membranes offer an attractive PFAS-free alternative to Nafion for efficient and durable water electrolysis and fuel cell technologies.

Nafion↗
DOE OSTI2025

Electrocatalyst Engineering and Device Benchmarking for Low Temperature CO2 Electrolysis

This oral presentation is for an invited talk in Division of Energy and Fuels, Symposium: "CO2 Conversion and Utilization-II: Electrochemical CO2 Conversion to Fuels and Valuable Chemicals" at ACS Spring 2025 (March 23-27, 2025) in San Diego, CA. The presentation will primarily discuss the crucial role of electrocatalyst design in the CO2 conversion to sustainable, carbon-neutral gas and liquid products. Some preliminary benchmarking studies of off-the-shelf electrocatalysts will be also shown in different device configurations to achieve good selectivity at industrially relevant current densities.

CO2 electrochemical reduction↗
DOE OSTI2026

Integrated techno-economic framework for nuclear hydrogen production: assessing the role of high temperature steam electrolysis and safety considerations

This manuscript presents a comprehensive techno-economic assessment of nuclear integrated hydrogen production through high-temperature steam electrolysis (HTSE) in the U.S. Gulf Coast region. Given the significant role of hydrogen as an energy carrier and chemical feedstock, the research evaluates the feasibility of co-locating HTSE facilities with existing nuclear power plants (NPPs) to enhance hydrogen production efficiency and cost-effectiveness. Here, the study highlights the advantages of HTSE over traditional low-temperature electrolysis, particularly in leveraging thermal and electrical energy from NPPs. A novel framework for hydrogen deployment is introduced, integrating hydrogen market analysis, techno-economic evaluation (TEA), and safety assessments. The findings underscore the economic viability of hydrogen production in light of current market conditions, including fluctuating natural gas prices and the impact of production tax credits under the Inflation Reduction Act. A case study in the Gulf Coast region demonstrates the potential for strategic hydrogen production to meet growing industrial demand while ensuring safety and regulatory compliance. Overall, this research contributes to the advancement of nuclear integrated hydrogen production as a sustainable energy solution.

08 - HYDROGEN↗
NASA NTRS1989

Electrochemical incineration of wastes

A low temperature electrolysis process has been developed for the treatment of solid waste material and urine. Experiments are described in which organic materials are oxidized directly at the surface of an electrode. Also, hypochlorite is generated electrochemically from chloride component of urine. Hypochlorite can act as a strong oxidizing agent in solution. The oxidation takes place at 30-60 C and the gaseous products from the anodic reaction are carbon dioxide, nitrogen, oxygen. Hydrogen is formed at the cathode. Carbon monoxide, and nitrogen oxides and methane were not detected in the off gases. Chlorine was evolved at the anode in relatively low amounts.

Kaba, L.↗
DOE OSTI2026

H2@Scale - Validating an Electrolysis System with High Output Pressure: Cooperative Research and Development Final Report, CRADA Number CRD-18-00741

Electrolysis has been a commercially available product for a while and electrolyzers have been a proven capability to provide additional benefits (e.g. controllable load for grid services) in addition to production of hydrogen. The hydrogen output is typically compressed for storage and dispensing. Compression adds cost and decreases system reliability. Honda’s electrolyzer systems have been developed to include electrochemical compression to leverage the production system itself for at least partial compression. In this project, the team will evaluate Honda’s PEM based electrochemical compression system. The system is capable of compressing hydrogen up to 70 MPa electrochemically. Validation testing is the next step to accelerate this technology into the marketplace, as the validation will provide needed data under a variety of operation conditions and controls. These operating conditions and controls are based on over a decade of NLR research and development with low-temperature electrolysis. The validation testing will include preparing NLR’s site for third party evaluation, benchmark testing of Honda’s stack and system, and simulating operation connected to renewables or in a grid service profile. NLR’s Energy System Integration Lab will be the location for the electrolyzer validation research and integrated into the Hydrogen Infrastructure Test & Research Facility (HITRF). This will build into the existing retail style hydrogen fueling station for a fully integrated experimental setup.

08 HYDROGEN↗
DOE OSTI2026

Evaluating the Effects of Anode Porous Transport Layer on the Performance and Durability of Anion Exchange Membrane Electrolyzers

As anion exchange membrane systems have emerged as a competitive low temperature electrolysis technology, research has expanded to other components and device integration. In this study, nickel (Ni) and stainless steel (SS)-based porous transport layers (PTLs) are investigated in membrane electrode assemblies (MEAs). Compared to MEAs using Ni, the SS PTL shows higher performance due to less kinetics and residual loss and possibly due to a combination of iron mobility improving oxygen evolution reactivity and electron conduction pathways, as well as higher porosity increasing site access. Voltage decay rates of approximately 144 and 115 μV/h, respectively, for the Ni and SS PTLs are found, although the long-term durability and lifetime implications are convoluted. Voltage breakdown analysis confirms that both PTLs saw significant increases in residual loss possibly due to catalyst/PTL property changes that affected electronic, ionic, and mass transport pathways. For the Ni PTL, a higher proportion of the losses were due to cell kinetics; comparatively, more of the SS PTL losses were due to increases in the high frequency resistance. The experimental findings presented here provide insights on the impact of the PTL materials and their properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2000

Microreactor System Design for a NASA In Situ Propellant Production Plant on Mars

The NASA In Situ Resource Utilization (ISRU) program is planning near-term missions to Mars that will include chemical processes for converting the carbon dioxide (CO2) and possibly water from the Martian environment to propellants, oxygen, and other useful chemicals. The use of indigenous resources reduces the size and weight of the payloads from Earth significantly, representing enormous cost savings that make human exploration of Mars affordable. Extraterrestrial chemical processing plants will need to be compact, lightweight, highly efficient under reduced gravity, and extraordinarily reliable for long periods. Microchemical and thermal systems represent capability for dramatic reduction in size and weight, while offering high reliability through massive parallelization. In situ propellant production (ISPP), one aspect of the ISRU program, involves collecting and pressurizing atmospheric CO2, conversion reactions, chemical separations, heat exchangers, and cryogenic storage. A preliminary system design of an ISPP plant based on microtechnology has demonstrated significant size, weight, and energy efficiency gains over the current NASA baseline. Energy management is a strong driver for Mars-based processes, not only because energy is a scarce resource, but because heat rejection is problematic; the low pressure environment makes convective heat transfer ineffective. Energy efficiency gains are largely achieved in the microchemical plant through extensive heat recuperation and energy cascading, which has a small size and weight penalty because the added micro heat exchangers are small. This leads to additional size and weight gains by reducing the required area of waste heat radiators. The microtechnology-based ISPP plant is described in detail, including aspects of pinch analysis for optimizing the heat exchanger network. Three options for thermochemical compression Of CO2 from the Martian atmosphere, adsorption, absorption, and cryogenic freezing, are presented, as well as three options for water decomposition, low temperature electrolysis, high temperature electrolysis, and thermochemical decomposition. Other elements of the plant include Sabatier and reverse water gas shift reactors, water recovery, chemical separations, and cryogenic storage. Data are presented supporting preliminary sizing of components, and results of the system design are compared to the existing NASA baseline that is based on conventional technologies.

TeGrotenhuis, W. E.↗
DOE OSTI2025

Beyond Price Taker: Optimizing Integrated Energy Systems Considering Market/Grid Interactions

Integrated Energy Systems (IES) combine two or more processes to increase the efficiency, flexibility of operation, and the overall reliability. However, analyzing IESs in volatile electricity markets is challenging, since the volatility in electricity prices makes the conventional levelized cost-type analysis less realistic. This work presents two approaches to address the challenge: price-taker and a surrogates-based approach for incorporating market interactions. The price-taker approach formulates a multiperiod optimization problem that takes the time-varying electricity prices into account, and solves the optimization problem to determine the optimal operational schedule that maximizes the chosen economic metric. This approach is successfully applied to investigate the performance of flexible power and hydrogen co-production systems. The market surrogates approach trains a machine learning model to predict the market behavior as a function of the characteristics of the IES. The trained surrogate model is used to optimize the design and operation of the given IES in an electricity market. This approach is demonstrated on a case study involving a nuclear power plant retrofitted with a low-temperature electrolysis unit to co-produce power and hydrogen.

beyond price taker↗
DOE OSTI2026

HydroGEN Consortium: Advancements in Hydrogen Production

HydroGEN Energy Materials Network (EMN) is an U.S. Department of Energy (DOE) EERE Hydrogen and Fuel Cell Technologies Office (HFTO)-funded consortium that aims to accelerate the discovery and development of advanced water splitting materials (AWSM) for clean, low-cost hydrogen production. Materials innovations are key to enhancing performance, durability, and cost of hydrogen generation technologies. HydroGEN is focused on low technology readiness level AWS technologies, including low- (alkaline exchanged membrane electrolysis) and high-temperature electrolysis (proton-conducting solid oxide electrolysis), photoelectrochecmical (PEC) and thermochemical (TCH) water splitting. The AWS technologies in this consortium study proton conduction in solid oxide electrolysis and hydroxide conduction in polymer electrolysis, and proton transport in photoelectrochemical water splitting. This presentation will provide an overview of the HydroGEN EMN and technical highlights of a few lab-led and DOE-awarded "seedling" R&D projects. HydroGEN continues to grow its community of industry, university, and national laboratories, forming a national innovation ecosystem focused on renewable hydrogen production.

08 HYDROGEN↗
DOE OSTI2026

HydroGEN Consortium

HydroGEN Energy Materials Network (EMN) is an U.S. Department of Energy (DOE) EERE Hydrogen and Fuel Cell Technologies Office (HFTO)-funded consortium that aims to accelerate the discovery and development of advanced water splitting materials (AWSM) for clean, low-cost hydrogen production. Materials innovations are key to enhancing performance, durability, and cost of hydrogen generation technologies. HydroGEN is focused on low technology readiness level AWS technologies, including low- (alkaline exchanged membrane electrolysis) and high-temperature electrolysis (proton-conducting solid oxide electrolysis), photoelectrochecmical (PEC) and thermochemical (TCH) water splitting. The AWS technologies in this consortium study proton conduction in solid oxide electrolysis and hydroxide conduction in polymer electrolysis, and proton transport in photoelectrochemical water splitting. This presentation will provide an overview of the HydroGEN EMN and technical highlights of a few lab-led and DOE-awarded "seedling" R&D projects. HydroGEN continues to grow its community of industry, university, and national laboratories, forming a national innovation ecosystem focused on renewable hydrogen production.

08 HYDROGEN↗
DOE OSTI2025

Electrochemical Reduction Pathways from Goethite to Green Iron in Alkaline Solution with Silicate Additive

Energy-efficient and low-temperature iron electrolysis in alkaline solutions is a low-cost and sustainable ironmaking process with zero-carbon emissions when renewable electrical sources are involved. However, its implementation is hindered by electrochemically inert Fe 3 O 4 and parasitic H 2 gas formation during the electrochemical reduction process, resulting in the low energy efficiency of iron electrolysis. Here, we further explore the potential of electrochemical reduction of goethite (FeOOH) by employing a low concentration of silicate additive in an alkaline solution to mitigate Fe 3 O 4 accumulation and H 2 generation. Electrochemical measurements coupled with operando X-ray diffraction and X-ray absorption spectroscopy suggested FeOOH → Fe 3 O 4 → Fe(OH) 2 → Fe reduction pathways. Interestingly, a poorly crystalline or amorphous Fe(OH) 2 phase formed in the NaOH/silicate mixed electrolyte, possibly due to the inhibitive effect of silicate on water and ion transport, which eventually contributed to the improved reduction of Fe 3 O 4 , also supported by atomistic simulations. This work demonstrates the potential for silicate as a low-cost and effective electrolyte additive to improve room-temperature green iron formation via electrolysis.

36 MATERIALS SCIENCE↗