Low energy activation analysis for geochemical exploration
Low energy activation analysis for geochemical exploration
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Low energy activation analysis for geochemical exploration
In lithium-ion conducting solid electrolytes the potential to enable high-energy-density secondary batteries and offer distinctive safety features as an advantage over traditional liquid electrolytes is shown. Achieving the combination of high ionic conductivity, low activation energy, and outstanding electrochemical stability in crystalline solid electrolytes is a challenge for the synthesis of novel solid electrolytes. We report an exceptionally low activation energy (Ea) and high room temperature superionic conductivity via facile aliovalent substitution of Li 3 AsS 4 by Ge, which increased the conductivity by two orders of magnitude as compared to the parent compound. The composition Li 3.334 Ge 0.334 As 0.666 S 4 has a high ionic conductivity of 1.12 mScm -1 at 27°C. Local Li + hopping in this material is accompanied by distinctive low activation energy Ea of 0.17 eV being the lowest of Li + solid conductors. Finally, our study demonstrates the efficacy of surface passivation of solid electrolyte to achieve compatibility with metallic lithium electrodes.
Abstract Solid‐state K‐ion conducting electrolytes are key elements to address the current problems in K secondary batteries. Here, we report a sulfide‐based K‐ion conductor K 3 SbS 4 with a low‐activation energy of 0.27 eV. W‐doped K 3− x Sb 1− x W x S 4 ( x =0.04, 0.06, 0.08, 0.10 and 0.12) compounds were also explored for increasing vacancy concentrations and improving ionic conductivity. Among them, K 2.92 Sb 0.92 W 0.08 S 4 exhibits the highest conductivity of 1.4×10 −4 S cm −1 at 40 °C, which is among the best reported potassium‐ion conductors at ambient temperature. In addition, K 2.92 Sb 0.92 W 0.08 S 4 is electrochemically stable with long‐chained potassium polysulfide of K 2 S x . A room‐temperature solid potassium–sulfur (K−S) battery system has therefore been successfully demonstrated, which is the first K−S battery prototype using non‐commercial inorganic‐based electrolyte to block the polysulfide shuttle.
Abstract Solid‐state K‐ion conducting electrolytes are key elements to address the current problems in K secondary batteries. Here, we report a sulfide‐based K‐ion conductor K 3 SbS 4 with a low‐activation energy of 0.27 eV. W‐doped K 3− x Sb 1− x W x S 4 ( x =0.04, 0.06, 0.08, 0.10 and 0.12) compounds were also explored for increasing vacancy concentrations and improving ionic conductivity. Among them, K 2.92 Sb 0.92 W 0.08 S 4 exhibits the highest conductivity of 1.4×10 −4 S cm −1 at 40 °C, which is among the best reported potassium‐ion conductors at ambient temperature. In addition, K 2.92 Sb 0.92 W 0.08 S 4 is electrochemically stable with long‐chained potassium polysulfide of K 2 S x . A room‐temperature solid potassium–sulfur (K−S) battery system has therefore been successfully demonstrated, which is the first K−S battery prototype using non‐commercial inorganic‐based electrolyte to block the polysulfide shuttle.
A strategy for modifying the structure of solid-state electrolytes (SSEs) to reduce the cation diffusion activation energy is presented. Two heavily W-doped sodium thioantimonate SSEs, Na 2.895 W 0.3 Sb 0.7 S 4 and Na 2.7 W 0.3 Sb 0.7 S 4 are designed, both exhibiting exceptionally low activation energy and enhanced room temperature (RT) ionic conductivity; 0.09 eV, 24.2 mS/cm and 0.12 eV, 14.5 mS/cm. At –15 °C the Na 2.895 W 0.3 Sb 0.7 S 4 displays a total ionic conductivity of 5.5 mS/cm. Here, the 30 % W content goes far beyond the 10–12 % reported in the prior studies, and results in novel pseudo-cubic or orthorhombic structures. Calculations reveal that these properties result from a combination of multiple diffusion mechanisms, including vacancy defects, strongly correlated modes and excessive Na-ions. An all-solid-state battery (ASSB) using Na 2.895 W 0.3 Sb 0.7 S 4 as the primary SSE and a sodium sulfide (Na 2 S) cathode achieves a reversible capacity of 400 mAh g –1 .
A strategy for modifying the structure of solid-state electrolytes (SSEs) to reduce the cation diffusion activation energy is presented. Two heavily W-doped sodium thioantimonate SSEs, Na 2.895 W 0.3 Sb 0.7 S 4 and Na 2.7 W 0.3 Sb 0.7 S 4 are designed, both exhibiting exceptionally low activation energy and enhanced room temperature (RT) ionic conductivity; 0.09 eV, 24.2 mS/cm and 0.12 eV, 14.5 mS/cm. At –15 °C the Na 2.895 W 0.3 Sb 0.7 S 4 displays a total ionic conductivity of 5.5 mS/cm. The 30 % W content goes far beyond the 10–12 % reported in the prior studies, and results in novel pseudo-cubic or orthorhombic structures. Here, calculations reveal that these properties result from a combination of multiple diffusion mechanisms, including vacancy defects, strongly correlated modes and excessive Na-ions. An all-solid-state battery (ASSB) using Na 2.895 W 0.3 Sb 0.7 S 4 as the primary SSE and a sodium sulfide (Na 2 S) cathode achieves a reversible capacity of 400 mAh g –1 .
Inorganic Na-ion superionic conductors play a vital role in all-solid-state Na batteries that operate at room temperature. Sodium thioantimonate (Na3SbS4), a popular sulfide-based solid electrolyte, has attracted serious attention due to its advantages of high ionic conductivity at room temperature and impressive chemical stability under ambient conditions. Much research detailing Na3SbS4 focused on its synthetic approaches and interfacial stability against Na metal, yet, there is limited information elucidating a fundamental understanding of the Na- ion diffusion mechanisms in Na3SbS4 with different crystal structures (e.g., tetragonal and cubic). Herein, we combine real-time electrochemical impedance measurements with theoretical simulations based on density functional theory and in situ quasi-elastic neutron scattering to study the Na-ion conductive properties of Na3SbS4 during its phase transition from a tetragonal to cubic structure. Although there is a slight change in the lattice parameters, the energy barrier for Na-ion diffusion in the tetragonal structure was determined to be much larger (5-10 times) than that in the cubic structure from both theoretical and experimental perspectives. The high degree of symmetry in cubic Na3SbS4 leads to less interatomic correlations between Na and S(Sb) atoms, a shorter jump distance (2.85 angstrom), and a larger diffusion coefficient. This research provides insight into understanding the Na-ion diffusion in solid electrolytes with phase transitions and provides fundamental guidance for designing novel solid-state Na-ion conductors.
In this work, magnesite (MgCO 3 ) precipitation within the nanoconfined space of adsorbed H 2 O films (~5 monolayers) was determined to have an apparent activation energy of only 36 ± 6 kJ mol –1 , suggesting that Mg 2+ under nanoconfinement adopts a hydration configuration that mimics that of aqueous Ca 2+ , at least energetically, if not also specifically in hydration structure.
The latest development in the solid electrolytes for Li-based batteries indicated that anti-perovskites such as LI 3 OCI have the highest Li concentration of all Li-based electrolytes. Furthermore, this class of materials displays superionic conductivity, low activation energy, and very low electronic conductivity. In this project, we studied anti-perovskite Li-based electrolytes in the thin film format.
All-solid-state batteries that employ superionic solid conductor potentially enable the broadening of battery operation in harsh environments, such as under subzero temperatures and even lower. The solid electrolyte as the key component requires structural stability, high-efficiency of ion transportation channels, and low activation energy to maintain the fast-ionic conduction against temperature drop. Herein, we use 3D superionic conductor Na 3 SbS 4 as a model to investigate the structure and conductive mechanism at extremely low temperature. Cryogenic in situ neutron and X-ray diffractions reveal that Na 3 SbS 4 maintains a stable tetragonal crystal structure and the anisotropic lattice contraction upon cooling. The dimensions of the S-gate (represented by the S–S pair length) that Na ions hop through in the 3D transportation network is found to maintain open sizes in the xy -plane, contributing to the low activation energy and impressive ionic conductivity. The Na-ion transportation network is demonstrated to be directionally accessible at the extremely low temperature, which reveals the ion conductive mechanism at broadened temperature range in the view of structure. Furthermore, these findings provide valuable guidance in the search for materials as promising solid electrolyte in solid-state batteries to fulfill harsh environmental needs.
An improved understanding of grain growth kinetics in nanocrystalline materials, and in metals and alloys in general, is of continuing interest to the scientific community. In this study, Mg - Al thin films containing ~10 wt.% Al and with 14.5 nm average grain size were produced by magnetron-sputtering and subjected to heat-treatments. The grain growth evolution in the early stages of heat treatment at 423 K (150 °C), 473 K (200 °C) and 573K (300 °C) was observed with transmission electron microscopy and analyzed based upon the classical equation developed by Burke and Turnbull. The grain growth exponent was found to be 7±2 and the activation energy for grain growth was 31.1±13.4 kJ/mol, the latter being significantly lower than in bulk Mg-Al alloys. The observed grain growth kinetics are explained by the Al supersaturation in the matrix and the pinning effects of the rapidly forming beta precipitates and possibly shallow grain boundary grooves. The low activation energy is attributed to the rapid surface diffusion which is dominant in thin film systems.
The development of materials showing rapid proton conduction with a low activation energy and stable performance over a wide temperature range is an important and challenging line of research. Here, we report confinement of sulfuric acid within porous MFM-300(Cr) to give MFM-300(Cr)·SO 4 (H 3 O) 2 , which exhibits a record-low activation energy of 0.04 eV, resulting in stable proton conductivity between 25 and 80 °C of >10 –2 S cm –1 . In situ synchrotron X-ray powder diffraction (SXPD), neutron powder diffraction (NPD), quasielastic neutron scattering (QENS), and molecular dynamics (MD) simulation reveal the pathways of proton transport and the molecular mechanism of proton diffusion within the pores. Confined sulfuric acid species together with adsorbed water molecules play a critical role in promoting the proton transfer through this robust network to afford a material in which proton conductivity is almost temperature-independent.
Slow kinetics of polysulfide conversion reactions lead to severe issues for lithium–sulfur (Li–S) batteries, for example, low rate capability, polysulfide migration, and low Coulombic efficiencies. These challenges hinder the practical applications of Li–S batteries. Here, we proposed a rational strategy of tuning the d-band of catalysts to accelerate the conversion of polysulfides. Nitrogen vacancies were engineered in hexagonal Ni 3 N (space group P 6 3 22) to tune its d-band center, leading to the strong interaction between polysulfides and Ni 3 N. Because of the greater electron population in the lowest occupied molecular orbital of Li 2 S 4 , the terminal S–S bonds were weakened for breaking. Temperature-dependent experiments confirm that Ni 3 N 0.85 demonstrates a much low activation energy, thereby accelerating the conversion of polysulfides. A Li–S cell using Ni 3 N 0.85 can deliver a high initial discharge capacity of 1445.9 mAh g –1 (at 0.02 C) and low decay per cycle (0.039%). The Ni 3 N 0.85 cell can also demonstrate an initial capacity of 1200.4 mAh g –1 for up to 100 cycles at a high loading of 5.2 mg cm –2 . The high efficiency of rationally designed Ni 3 N 0.85 demonstrates the effectiveness of the d-band tuning strategy to develop low-activation-energy catalysts and to promote the atomic understanding of polysulfide conversion in Li–S batteries.
Despite a wide range of solid electrolyte phases, most of them only exist at high temperatures. The challenge is to tailor the chemical compositions of solid electrolyte materials that yield high ionic conductivities and low activation energies at ambient temperature. This is crucial for the development of all-solid-state batteries that are both powerful and safe. Here, we report our recent works to meet this challenge by utilizing multiple mechanistic principles and clusters as the building blocks. We show that the atomic-level interactions that govern the fast-ion conduction can be optimized by incorporating polyanion dynamics, non-stoichiometry, point defects and strong ionic correlations. Specifically, two case studies of Li/Na solid electrolytes will be covered, including lithium solid electrolytes (SE) with record-high ionic conductivities at room temperature (over 100 mS/cm) and sodium SE with record-low activation energies (< 0.1 eV).
For decades, copper has been used to improve the performance of cadmium telluride thin film solar cells. However, it has also been shown to be the main cause of metastability in CdTe. Recently a low activation energy has been reported for the thermal diffusion of Cu in CdTe explaining the ease of motion that it has under moderate temperatures. The community consensus is that copper segregates to the absorber grain boundaries, where it's either beneficial or detrimental to device performance depending on its concentration. Using nanoscale X-ray micrsocopy and a two-dimensional drift-diffusion model we present a preliminary correlation between local copper distribution and electrical performance of a single-junction CdTe/CdS solar cell.
Fuel cells convert chemical energy directly into electrical energy with high efficiencies and environmental benefits, as compared with traditional heat engines(1-4). Yttria-stabilized zirconia is perhaps the material with the most potential as an electrolyte in solid oxide fuel cells (SOFCs), owing to its stability and near-unity ionic transference number(5). Although there exist materials with superior ionic conductivity, they are often limited by their ability to suppress electronic leakage when exposed to the reducing environment at the fuel interface. Such electronic leakage reduces fuel cell power output and the associated chemo-mechanical stresses can also lead to catastrophic fracture of electrolyte membranes(6). Here we depart from traditional electrolyte design that relies on cation substitution to sustain ionic conduction. Instead, we use a perovskite nickelate as an electrolyte with high initial ionic and electronic conductivity. Since many such oxides are also correlated electron systems, we can suppress the electronic conduction through a filling-controlled Mott transition induced by spontaneous hydrogen incorporation. Using such a nickelate as the electrolyte in free-standing membrane geometry, we demonstrate a low-temperature micro-fabricated SOFC with high performance. The ionic conductivity of the nickelate perovskite is comparable to the best-performing solid electrolytes in the same temperature range, with a very low activation energy. The results present a design strategy for high-performance materials exhibiting emergent properties arising from strong electron correlations.
Conjugated polymers based on indacenodithiophene-benzothiadiazole (IDT-BT) have attracted great interest due to their high charge carrier mobilities while being low crystallinity (i.e. near-amorphous.) They represent a promising design strategy to achieve both excellent stretchability and electrical performance. Here, we describe an approach on structural modifications of IDT-BT, namely by introducing non-covalent interactions and substituting building blocks to promote extended coplanar backbones. We systematically investigated the effects of structural modifications on backbone conformation, polymer aggregations, and charge carrier mobilities. Among the investigated polymers, the fluorinated derivative IDT-FBT demonstrated the highest charge carrier mobility of 5.19 cm 2 /Vs, along with low activation energy and Urbach energy indicating its low energy disorder level. The high mobility was attributed to the higher backbone planarity reinforced by S···F and H···F non-covalent interactions and improved interchain interactions through strong aggregation. In conclusion, our findings indicate that increasing backbone coplanarity may further improve mobility in low crystallinity conjugated polymers.
Owing to the high abundance and low cost of sodium (Na), Na-based rechargeable batteries hold great potential for large-scale applications in the future energy industry. However, as key component of the battery electrolyte, only a few Na-based superionic conductors can reach the ionic conductivity comparable to that of liquid or gel electrolytes. Here, we provide a guideline for the development of cluster-based Na-rich antiperovskite superionic conductors using computational studies. With a selected cluster ion BCl 4 – , we are able to achieve high-room-temperature Na-ionic conductivity over 10 –3 S/cm and low activation energies below 0.2 eV in the antiperovskite crystals Na 3 S(BCl 4 ) and Na 3 S(BCl 4 ) 0.5 I 0.5 . In addition, these materials have large bandgaps and favorable mechanical properties. Here, a comprehensive study of the stability and formation energy of these materials further illustrates possible routes for their synthesis. New insights into the conduction mechanism of these cluster-based superionic conductors are provided, including the cooperative motion of Na ions and the significant reduction of the migration barrier due to the changing orientation of the cluster ion.