SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The results of a research project on the development of computer software are presented. Research funds of $200,000 were expended over a three year period for software design and projects in connection with Project LOGOS (computer-aided design and certification of computing systems). Abstracts of theses prepared during the project are provided.
This Kennedy Space Center video presents live footage of the GOES (Geostationary Operational Environmental Satellite) at Astrotech with views of its exterior and the Space Systems Loral logo. The GOES mission is to provide weather imagery and quantitative sounding data for weather forecasting and related services.
Explore the source record for details and available documents.
The process and results of using formal methods to specify the Lights Out Ground Operations System (LOGOS) is presented in this paper. LOGOS is a prototype multi-agent system developed to show the feasibility of providing autonomy to satellite ground operations functions at NASA Goddard Space Flight Center (GSFC). After the initial implementation of LOGOS the development team decided to use formal methods to check for race conditions, deadlocks and omissions. The specification exercise revealed several omissions as well as race conditions. After completing the specification, the team concluded that certain tools would have made the specification process easier. This paper gives a sample specification of two of the agents in the LOGOS system and examples of omissions and race conditions found. It concludes with describing an architecture of tools that would better support the future specification of agents and other concurrent systems.
This final report is concerned with the tasks performed during the contract period which included spacecraft coating development, testing, and applications. Five marker coatings consisting of a bright yellow handrail coating, protective overcoat for ceramic coatings, and specialized primers for composites (or polymer) surfaces were developed and commercialized by AZ Technology during this program. Most of the coatings have passed space environmental stability requirements via ground tests and/or flight verification. Marker coatings and protective overcoats were successfully flown on the Passive Optical Sample Assembly (POSA) and the Optical Properties Monitor (OPM) experiments flown on the Russian space station MIR. To date, most of the coatings developed and/or modified during this program have been utilized on the International Space Station and other spacecraft. For ISS, AZ Technology manufactured the 'UNITY' emblem now being flown on the NASA UNITY node (Node 1) that is docked to the Russian Zarya (FGB) utilizing the colored marker coatings (white, blue, red) developed by AZ Technology. The UNITY emblem included the US American flag, the Unity logo, and NASA logo on a white background, applied to a Beta cloth substrate.
In an effort to determine the gap between the actual performance and the necessary performance of employees for the effective and efficient accomplishment of an organization's mission and goals, an organization-wide Training Needs Assessment must be conducted. The purpose of this work was to conduct a training needs analysis and prepare a NASA Langley Catalog of On-Site Training programs. The work included developing a Training Needs Assessment Survey, implementing the survey, analyzing and researching the training needs, identifying the courses to meet the needs, and preparing and designing an On-Site Training Catalog. This needs analysis attempted to identify performance weaknesses and deficits; seek out and provide opportunities for improved performance; anticipate and avoid future problems; enhance and create new strengths. The end product is a user-friendly catalog of on-site training available. The results include: top-down approach to needs assessment; improved communication with training coordinators; 98 percent return rate of the Training Needs Assessment survey; complete, newly designed, user-friendly catalog; 167 catalog descriptions advertised; 82 new courses advertised; training logo; and request for the training application form.
An important part of NASA's mission involves the secondary application of its technologies in the public and private sectors. One current application being developed is The Adult Literacy Evaluator, a simulation-based diagnostic tool designed to assess the operant literacy abilities of adults having difficulties in learning to read and write. Using ICAT system technology in addition to speech recognition, closed-captioned television (CCTV), live video and other state-of-the art graphics and storage capabilities, this project attempts to overcome the negative effects of adult literacy assessment by allowing the client to interact with an intelligent computer system which simulates real-life literacy activities and materials and which measures literacy performance in the actual context of its use. The specific objectives of the project are as follows: (1) To develop a simulation-based diagnostic tool to assess adults' prior knowledge about reading and writing processes in actual contexts of application; (2) to provide a profile of readers' strengths and weaknesses; and (3) to suggest instructional strategies and materials which can be used as a beginning point for remediation. In the first and developmental phase of the project, descriptions of literacy events and environments are being written and functional literacy documents analyzed for their components. Examples of literacy events and situations being considered included interactions with environmental print (e.g., billboards, street signs, commercial marquees, storefront logos, etc.), functional literacy materials (e.g., newspapers, magazines, telephone books, bills, receipts, etc.) and employment related communication (i.e., job descriptions, application forms, technical manuals, memorandums, newsletters, etc.). Each of these situations and materials is being analyzed for its literacy requirements in terms of written display (i.e., knowledge of printed forms and conventions), meaning demands (i.e., comprehension and word knowledge) and social situation. From these descriptions, scripts are being generated which define the interaction between the student, an on-screen guide and the simulated literacy environment. The proposed outcome of the Evaluator is a diagnostic profile which will present broad classifications of literacy behaviors across the major areas of metacognitive abilities, word recognition, vocabulary knowledge, comprehension and writing. From these classifications, suggestions for materials and strategies for instruction with which to begin corrective action will be made. The focus of the Literacy Evaluator will be essentially to provide an expert diagnosis and an interpretation of that assessment which then can be used by a human tutor to further design and individualize a remedial program as needed through the use of an authoring system.
NASA's drive toward realizing higher levels of autonomy, in both its ground and space systems, is supporting an active and growing interest in agent technology. This paper will address the expanding research in this exciting technology area. As examples of current work, the Lights-Out Ground Operations System (LOGOS), under prototyping at the Goddard Space Flight Center (GSFC), and the spacecraft-oriented Remote Agent project under development at the Ames Research Center (ARC) and the Jet Propulsion Laboratory (JPL) will be presented.
Document fraud including unauthorized duplication of identification cards and credit cards is a serious problem facing the government, banks, businesses, and consumers. In addition, counterfeit products such as computer chips, and compact discs, are arriving on our shores in great numbers. With the rapid advances in computers, CCD technology, image processing hardware and software, printers, scanners, and copiers, it is becoming increasingly easy to reproduce pictures, logos, symbols, paper currency, or patterns. These problems have stimulated an interest in research, development and publications in security technology. Some ID cards, credit cards and passports currently use holograms as a security measure to thwart copying. The holograms are inspected by the human eye. In theory, the hologram cannot be reproduced by an unauthorized person using commercially-available optical components; in practice, however, technology has advanced to the point where the holographic image can be acquired from a credit card-photographed or captured with by a CCD camera-and a new hologram synthesized using commercially-available optical components or hologram-producing equipment. Therefore, a pattern that can be read by a conventional light source and a CCD camera can be reproduced. An optical security and anti-copying device that provides significant security improvements over existing security technology was demonstrated. The system can be applied for security verification of credit cards, passports, and other IDs so that they cannot easily be reproduced. We have used a new scheme of complex phase/amplitude patterns that cannot be seen and cannot be copied by an intensity-sensitive detector such as a CCD camera. A random phase mask is bonded to a primary identification pattern which could also be phase encoded. The pattern could be a fingerprint, a picture of a face, or a signature. The proposed optical processing device is designed to identify both the random phase mask and the primary pattern [1-3]. We have demonstrated experimentally an optical processor for security verification of objects, products, and persons. This demonstration is very important to encourage industries to consider the proposed system for research and development.
Since 1915, the National Advisory Committee for Aeronautics (NACA), transformed into NASA in 1958, has performed cutting-edge research to solve the problems of flight. Using a Grumman F4F-3 Wildcat during World War II, NACA engineers at the Langley Aeronautical Laboratory (now Langley Research Center) in Hampton, Virginia, used this aircraft to investigate the cuffs on the propeller blades to determine their efficiency. While not built to the full production standard of other Grumman Wildcats, research on this aircraft, the second F4F-3, proved most successful in advancing knowledge of the aerodynamics of this engine and propeller system. A close-up of the propeller blades with Curtiss Electric Propellers' logo is shown.
To reduce the cost of future spaceflight missions and to perform new science, NASA has been investigating autonomous ground and space flight systems. These goals of cost reduction have been further complicated by nanosatellites for future science data-gathering which will have large communications delays and at times be out of contact with ground control for extended periods of time. This paper describes two prototype agent-based systems, the Lights-out Ground Operations System (LOGOS) and the Agent Concept Testbed (ACT), and their autonomic properties that were developed at NASA Goddard Space Flight Center (GSFC) to demonstrate autonomous operations of future space flight missions. The paper discusses the architecture of the two agent-based systems, operational scenarios of both, and the two systems autonomic properties.
Requirements-to-Design-to-Code (R2D2C) is an approach to the engineering of computer-based systems that embodies the idea of requirements-based programming in system development. It goes further; however, in that the approach offers not only an underlying formalism, but full formal development from requirements capture through to the automatic generation of provably-correct code. As such, the approach has direct application to the development of systems requiring autonomic properties. We describe a prototype tool to support the method, and illustrate its applicability to the development of LOGOS, a NASA autonomous ground control system, which exhibits autonomic behavior. Finally, we briefly discuss other areas where the approach and prototype tool are being considered for application.
The project assigned this summer involves designing a lunar regolith mining robotics competition. This process involves consulting several assets available at the Kennedy Space Center. The process involves several steps. The first step is to determine the requirements for the competition. Once these requirements are determined, the dimensions of the playing field are drawn up, first by hand, and then using computer models. After these drawings are tentatively decided upon, the cost of materials must be determined, so as to fit within the allotted budget for the project. The materials are to then be ordered, assembled, broken down, and stored throughout the duration of the competition. We must also design the advertisements and logos for the competition. This is to market and publicize the competition to college level teams. We must also determine the rules for the competition so as to have uniform requirements for all teams. Once these processes are completed, the competition can be finalized and publicized for the public. The contributing parties are Greg Galloway, Robert Mueller, Susan Sawyer, Gloria Murphy, Julia Nething, and Cassandra Liles.
The Lunar Regolith Excavation Competition is a new competition that needs graphics, logos, rules, as well as an arena. Although this is the first year of the competition, the competition is modeled after an existing competition, the Centennial Lunar Excavator Challenge. This competition however is aimed at college students. This makes the challenge identifying key aspects of the original competition and modeling them to fit into an easier task, and creating exciting advertisement that helps encourage participation. By using a youth focus group, young insight, as well as guiding advice from experts in the field, hopefully an arena can be designed and built, rules can be molded and created to fit, and alluring graphics can be printed to bring about a successful first year of the Lunar Regolith Excavation Competition.
STEP is imported into Engineering Sketch Pad. Some bodies where slightly scaled and translated in OpenCSM to create a manifold solid for the downstream meshing process. The braces at the base and columns around the core are omitted because their solids are malformed or created nonmanifold intersections. EGADS provides an initial tessellation of the surface. refine adapted the surface mesh to a curvature and feature size metric. TetGen initially filled the volume. The TetGen mesh is adapted to the Spalding Law of the Wall u+ with refine to provide the initial mesh for flow solution. Solution-based mesh adaptation is performed where FUN3D-FV computes the flow solution with the Reynolds-averaged Navier-Stokes equations coupled to the Spalart-Allmaras turbulence model. The freestream Mach number is 4 approaching 40° from the central axis of the Space Needle. The volume and surface mesh is adapted with refine to reduce estimated interpolation error in Mach number via the multiscale metric. The adapted mesh implicitly resolves the boundary layers, shocks, and expansions. The surface mesh is shown for the lee side with a slice through the volume on the left. Computational schlieren in the lower right shows density variations. A slice of the mesh is colored with Mach number in the upper right where mesh with freestream Mach number is not rendered. The volume mesh contains 64 million vertices. A NASA worm logo is sketched and extruded into a solid in OpenCSM. The worm is unioned to the Space Needle roof to produce the inset mesh image.
NASA’s Agency-wide Safety Culture is implemented at the Kennedy Space Center (KSC) using a unique strategy due an unparalleled approach in making human spaceflight history. Kennedy Space Center, the world’s premier multi-user spaceport, enables U.S. government and commercial space access, while providing the world a resource to allow the exploration of and the ability to work in space. A consistently healthy safety culture at KSC is imperative for mission success: desired achievements, protection of space flight hardware, and ultimately, the preservation of human life requires the support of a healthy safety culture. Emphasis on the NASA Agency-wide development of Safety Culture began with the conception of the NASA Agency Safety Culture Working Group. After the devastating loss of life and mission of the Space Shuttle Colombia, a broken safety culture was identified as an organizational cause by the Columbia Accident Investigation Board Report. Thus, the Agency Safety Culture Working Group was developed in 2009 to assess the status of the Agency’s Safety Culture, while addressing safety culture concerns at the NASA Center-level. A Five-factor model was developed to serve as the guiding principles for Safety Culture: 1) Reporting Culture, 2) Just Culture, 3) Flexible Culture, 4) Learning Culture, and 5) Engaged Culture. These five factors are included in the NASA Safety Culture logo, which was intentionally designed as a DNA double helix to prompt the permeation of safety into day-to-day work. KSC specifically implements the NASA Agency-wide Safety Culture principles in a tailored approach that is relevant to the diversity of work being performed. An emphasis is placed on the implementation to include safety at home, not exclusively at work. This emphasis is a KSC-specific element that has been intentionally added to promote a closed loop Safety Culture. To advertise the safety culture, various safety and health events are held throughout the calendar year, providing innovative speakers and engaging activities, while also promoting a wide range of curated safety initiatives. Development and continuous improvement of the KSC safety tracking database, allows for advanced tracking-to-closure, along with providing data sets used to identify areas of emphasis. Other safety initiatives rely solely on employee participation, such as the photo challenges; participants are encouraged to identify and capture themselves, coworkers, or family members participating in safe or healthy activities to share with others within the Center and at Agency levels. Fabrication of exclusive videos and graphics are utilized to advertise and inform employee of safety initiatives, upcoming safety events, and general dispersion of safety information. In addition, an anonymous Agency-wide Safety Culture Survey is advertised, administered, and analyzed at Kennedy Space Center, with the purpose of receiving basic feedback on Safety Culture perceptions to help prevent future incidents from occurring. Through these briefly identified means, and many other forms of employee engagement, Kennedy Space Center aims to maintain safety in the forefront, while creating an environment where everyone trusts that safety is a priority.
Sending human life past the Low Earth Orbit (LEO) to explore the Moon and Mars will be challenging. The Earth’s magnetic field naturally protects life from deep-space particle radiation such as Galactic Cosmic Rays (GCR) and Solar Particle Events (SPE); these will pose health risks to humans in deep space. Research has been done to investigate these effects, like BioSentinel, the first biological CubeSat to fly beyond the LEO, designed to culture yeast in a microfluidic device and record optical measurements of growth and metabolism. However, experiments can only report cell damage as bulk growth curves, while deep-space radiation causes damage that is heterogeneous among individual cells. AMMPER is an open-source, agent-based, computational model coded in Python to simulate the effects of deep-space radiation on individual yeast cells (Saccharomyces cerevisiae) to facilitate interpretation of biological radiation experiments. Version 1.0 of the code ran in a command line interface (CLI), limiting use to those familiar with modularization, object-oriented programming, and computational models. Here we present a graphical user interface (GUI) for AMMPER to increase its accessibility. GUI development included converting input points and UI files, designing an application and logo, and expanding program packages. Additionally, we added optical assistance that corresponded with simulation parameters, which included simulation type, cell type, ROS model, and radiation dosage, as well as customizable display and file exportation features. Following a pilot testing period, its structure was updated further to enhance abilities, adding increased runs, video visualization, data plotting, and an educational/tutorial component. Future work will include creating a bit installer and runtime environment for AMMPER. Ultimately, the creation of the GUI has two main goals: to facilitate the integration of computational models into the work of researchers in microbial radiobiology, and to act as an interactive and visual resource for space biology education.