Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “local spring effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Local spring effect in titanium-based layered oxides

Titanium-based layered oxides (TLOs) are one of the most promising electrode material families for sodium-ion batteries (NIBs) due to their smooth charge/discharge profiles and excellent cycle performance. However, the reaction mechanism of these materials, especially the reason for the disappearance of multiple voltage plateaus, is still not clear. Herein, two representative TLOs (Na 2/3 Ni 1/3 Ti 2/3 O 2 and Na 2/3 Co 1/3 Ti 2/3 O 2 ) with the same P2 crystal structure have been studied to scrutinize those unexplained issues. In situ synchrotron high-energy X-ray diffraction revealed a solid solution reaction mechanism for both, suggesting the absence of rigid phase transitions upon electrochemical cycling. An interesting “spring effect” of the TiO 6 octahedron, i.e., the reversible vibration of the central Ti atom inside the local octahedron upon electrochemical redox, was demonstrated by advanced X-ray absorption spectroscopy and theoretical calculations. Such an effect could suppress the rigid phase transitions, and result in smooth charge/discharge profiles and enhanced cycle stability. Finally, this work not only accounts for the disappearance of multiple voltage plateaus of TLOs for NIBs, but also provides an effective local-structure viewpoint to increase the cycle stability of electrode materials for other advanced battery systems.

25 ENERGY STORAGE↗
NASA NTRS2006

Low-Velocity Impact Response of Sandwich Beams with Functionally Graded Core

The problem of low-speed impact of a one-dimensional sandwich panel by a rigid cylindrical projectile is considered. The core of the sandwich panel is functionally graded such that the density, and hence its stiffness, vary through the thickness. The problem is a combination of static contact problem and dynamic response of the sandwich panel obtained via a simple nonlinear spring-mass model (quasi-static approximation). The variation of core Young's modulus is represented by a polynomial in the thickness coordinate, but the Poisson's ratio is kept constant. The two-dimensional elasticity equations for the plane sandwich structure are solved using a combination of Fourier series and Galerkin method. The contact problem is solved using the assumed contact stress distribution method. For the impact problem we used a simple dynamic model based on quasi-static behavior of the panel - the sandwich beam was modeled as a combination of two springs, a linear spring to account for the global deflection and a nonlinear spring to represent the local indentation effects. Results indicate that the contact stiffness of thc beam with graded core Increases causing the contact stresses and other stress components in the vicinity of contact to increase. However, the values of maximum strains corresponding to the maximum impact load arc reduced considerably due to grading of thc core properties. For a better comparison, the thickness of the functionally graded cores was chosen such that the flexural stiffness was equal to that of a beam with homogeneous core. The results indicate that functionally graded cores can be used effectively to mitigate or completely prevent impact damage in sandwich composites.

Apetre, N. A.↗
DOE OSTI2021

High-Latitude Stratospheric Aerosol Geoengineering Can Be More Effective if Injection Is Limited to Spring

Stratospheric aerosol geoengineering focused on the Arctic could substantially reduce local and worldwide impacts of anthropogenic global warming. Because the Arctic receives little sunlight during the winter, stratospheric aerosols present in the winter at high latitudes have little impact on the climate, whereas stratospheric aerosols present during the summer achieve larger changes in radiative forcing. Injecting SO 2 in the spring leads to peak aerosol optical depth (AOD) in the summer. We demonstrate that spring injection produces approximately twice as much summer AOD as year-round injection and restores approximately twice as much September sea ice, resulting in less increase in stratospheric sulfur burden, stratospheric heating, and stratospheric ozone depletion per unit of sea ice restored. Furthermore, we also find that differences in AOD between different seasonal injection strategies are small compared to the difference between annual and spring injection.

58 GEOSCIENCES↗
NASA NTRS2006

Bearing-Load Modeling and Analysis Study for Mechanically Connected Structures

Bearing-load response for a pin-loaded hole is studied within the context of two-dimensional finite element analyses. Pin-loaded-hole configurations are representative of mechanically connected structures, such as a stiffener fastened to a rib of an isogrid panel, that are idealized as part of a larger structural component. Within this context, the larger structural component may be idealized as a two-dimensional shell finite element model to identify load paths and high stress regions. Finite element modeling and analysis aspects of a pin-loaded hole are considered in the present paper including the use of linear and nonlinear springs to simulate the pin-bearing contact condition. Simulating pin-connected structures within a two-dimensional finite element analysis model using nonlinear spring or gap elements provides an effective way for accurate prediction of the local effective stress state and peak forces.

Knight, Norman F., Jr.↗
DOE OSTI2024

Anthropogenic aerosols mask increases in US rainfall by greenhouse gases

A comprehensive understanding of human-induced changes to rainfall is essential for water resource management and infrastructure design. However, at regional scales, existing detection and attribution studies are rarely able to conclusively identify human influence on precipitation. Here we show that anthropogenic aerosol and greenhouse gas (GHG) emissions are the primary drivers of precipitation change over the United States. GHG emissions increase mean and extreme precipitation from rain gauge measurements across all seasons, while the decadal-scale effect of global aerosol emissions decreases precipitation. Local aerosol emissions further offset GHG increases in the winter and spring but enhance rainfall during the summer and fall. Our results show that the conflicting literature on historical precipitation trends can be explained by offsetting aerosol and greenhouse gas signals. At the scale of the United States, individual climate models reproduce observed changes but cannot confidently determine whether a given anthropogenic agent has increased or decreased rainfall.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2003

Alabama NASA EPSCoR Preparation Grant Program: Grant No. NCC5-391

The funded research projects under the Experimental Program to Stimulate Cooperative Research (EPSCoR) grant program and the student fellowship awards are summarized in this report. The projects include: 1) Crystallization of Dehydratase/DcoH: A Target in Lung Disease; 2) Measuring Velocity Profiles in Liquid Metals using an Ultrasonic Doppler Velocimeter; 3) Synthesis, Structure, and Properties of New Thermoelectric Materials; 4) Computational Determination of Structures and Reactivity of Phenol-Formaldehyde Resins; 5) Synthesis of Microbial Polyesters in the NASA Bioreactor; 6) Visualization of Flow-Fields in Magnetocombustion; 7) Synthesis of Fluorescent Saccharide Derivatives. The student fellowship awards include: 1) Distributed Fusion of Satellite Images; 2) Study of the Relationship between Urban Development, Local Climate, and Water Quality for the Atlanta, Georgia Metrop; 3) Computer Simulation of the Effectiveness of a Spring-Loaded Exercise Device.

Gregory, John C.↗
NASA NTRS1988

A micromechanics model of the stiffness and strength of laminates with fiber waviness

A mathematical model based on the Euler-Bernoulli beam theory is proposed for predicting the effective Young's moduli of piecewise isotropic composite laminates with local ply curvatures in the main load-carrying layers. Strains in corrugated layers, In-Phase layers, Out-of-Phase layers are predicted for various geometries and material configurations by assuming matrix layers as elastic foundations of different spring constants. The effective Young's moduli measured from corrugated aluminum specimens and aluminum/epoxy specimens with In-Phase and Out-of-Phase wavy patterns coincide very well with the model predictions. Moire fringe analysis of an In-Phase specimen and an Out-of-Phase specimen are also presented confirming the main assumption of the model related to the elastic constraint due to the matrix layers. The present model is also compared with the experimental results and other models, including the micro-buckling models, published in the literature. The results of the present study show that even a very small scale local ply curvature produces a noticeable effect on the mechanical constitutive behavior of a laminated composite.

Harris, Charles E.↗
NASA NTRS1990

A deformation-formulated micromechanics model of the effective Young's modulus and strength of laminated composites containing local ply curvature

A mathematical model based on the Euler-Bermoulli beam theory is proposed for predicting the effective Young's moduli of piecewise isotropic composite laminates with local ply curvatures in the main load-carrying layers. Strains in corrugated layers, in-phase layers, and out-of-phase layers are predicted for various geometries and material configurations by assuming matrix layers as elastic foundations of different spring constants. The effective Young's moduli measured from corrugated aluminum specimens and aluminum/epoxy specimens with in-phase and out-of-phase wavy patterns coincide very well with the model predictions. Moire fringe analysis of an in-phase specimen and an out-of-phase specimen are also presented, confirming the main assumption of the model related to the elastic constraint due to the matrix layers. The present model is also compared with the experimental results and other models, including the microbuckling models, published in the literature. The results of the present study show that even a very small-scale local ply curvature produces a noticeable effect on the mechanical constitutive behavior of a laminated composite.

Lee, Jong-Won↗
NASA NTRS1994

Heat transfer measurements for Stirling machine cylinders

The primary purpose of this study was to measure the effects of inflow-produced heat turbulence on heat transfer in Stirling machine cylinders. A secondary purpose was to provide new experimental information on heat transfer in gas springs without inflow. The apparatus for the experiment consisted of a varying-volume piston-cylinder space connected to a fixed volume space by an orifice. The orifice size could be varied to adjust the level of inflow-produced turbulence, or the orifice plate could be removed completely so as to merge the two spaces into a single gas spring space. Speed, cycle mean pressure, overall volume ratio, and varying volume space clearance ratio could also be adjusted. Volume, pressure in both spaces, and local heat flux at two locations were measured. The pressure and volume measurements were used to calculate area averaged heat flux, heat transfer hysteresis loss, and other heat transfer-related effects. Experiments in the one space arrangement extended the range of previous gas spring tests to lower volume ratio and higher nondimensional speed. The tests corroborated previous results and showed that analytic models for heat transfer and loss based on volume ratio approaching 1 were valid for volume ratios ranging from 1 to 2, a range covering most gas springs in Stirling machines. Data from experiments in the two space arrangement were first analyzed based on lumping the two spaces together and examining total loss and averaged heat transfer as a function of overall nondimensional parameter. Heat transfer and loss were found to be significantly increased by inflow-produced turbulence. These increases could be modeled by appropriate adjustment of empirical coefficients in an existing semi-analytic model. An attempt was made to use an inverse, parameter optimization procedure to find the heat transfer in each of the two spaces. This procedure was successful in retrieving this information from simulated pressure-volume data with artificially generated noise, but it failed with the actual experimental data. This is evidence that the models used in the parameter optimization procedure (and to generate the simulated data) were not correct. Data from the surface heat flux sensors indicated that the primary shortcoming of these models was that they assumed turbulence levels to be constant over the cycle. Sensor data in the varying volume space showed a large increase in heat flux, probably due to turbulence, during the expansion stroke.

Kornhauser, Alan A.↗
NASA NTRS1993

Exact element modal analysis of beam/oscillator systems

Exact modal analysis of a beam/many-oscillator system is presented. Each oscillator consists of a discrete mass having rotational inertia, and two locally-dependent springs: one being rotational and the other, translational. A constant longitudinal force is applied to the mass, and its effect is coupled with the dynamic modes. The beam's distributed mass and other material properties, and its geometric properties, do not vary within spans bounded by the oscillators, but may vary from span to span. The classical separation-of-variables technique is used to obtain a dosedform description of the dynamic matrix, and the modal frequencies are determined as the zeros of this determinant.

Broome, Taft H., Jr.↗
DOE OSTI2023

Reciprocal transplants reveal asymmetric local adaptation of Himalayan Rhododendron approaching elevational range limit

Abstract As plant species expand their upper limits of distribution under current warming, some retain both traditional climate space and biotic environment while others encounter novel conditions. The latter is the case for Rhododendron campanulatum , a woody shrub that grows both above and below treeline at our study site in the Eastern Himalayas where a very conspicuous, stable treeline was defined by a nearly contiguous canopy of tall Abies spectabilis trees, many of which are over a century old. Prior work showed that treeline had remained static in this region while R. campanulatum expanded its elevational range limit. We tested local adaptation of R. campanulatum by performing reciprocal transplants between the species' current elevational range limit (4023 m above sea level [asl]) and just above treeline (3876 m asl). Contrary to expectation, the coldest temperatures of late winter and early mid‐spring were experienced by plants at the lower elevation: R. campanulatum at species' limit (upper site) were covered by snow for a longer period (40 more days) and escaped the coldest temperatures suffered by conspecifics at treeline (lower site). The harsher spring conditions at treeline likely explain why leaves were smaller at treeline (15.3 cm 2 ) than at species limit (21.3 cm 2 ). Contrary to results from equivalent studies in other regions, survival was reduced more by downslope than by upslope movement, again potentially due to extreme cold temperatures observed at treeline in spring. Upslope transplantation had no effect on mortality, but mortality of species limit saplings transplanted downslope was three times higher than that of residents at both sites. A general expectation is that locals should survive better than foreign transplants, but survival of locals and immigrants at our species limit site was identical. However, those species limit saplings that survived the transplant to treeline grew faster than both locals at treeline and the transplants at species limit. Overall, we found asymmetric adaptation: Compared with treeline saplings, those at species limit (147 m above treeline) were more tolerant of extremes in the growing season but less tolerant of extremes in winter and early mid‐spring, displaying local adaptation in a more complex manner than simply home advantage, and complicating predictions about impacts of future regional climate change.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRSDate not supplied

Design and Analysis of Shape Memory Spring Tires for Martian and Lunar Rover Vehicles

Shape memory alloys (SMAs) have played an important role in various innovative engineering and medical applications, such as aerospace actuators, vibration damping devices, and coronary stents. In applications, shape memory alloys are commonly utilized in two fundamentally different ways: (i) making use of the superelasticity/ pseudoelasticity (SE/PE) phenomena, as in applications in biomedical engineering, and (ii) taking advantages of the shape memory effect (SME), as is used for actuators. Their ability to act in such vastly different capacities is mainly due to their unique capability to recover large amounts of deformation produced by either applied stresses or temperature changes. One recent emerging application in use of SMAs has been in the area of non-pneumatic tire designs for Martian or Lunar roving vehicles. These vehicles require tires that are capable of traversing rugged terrain while withstanding extreme temperatures and atmospheric conditions. Inspired by the flexible wire mesh tires used on three Lunar Roving Vehicle (LRV) missions to the Moon on Apollo 15, 16, and 17, a new compliant tire technology was developed by the NASA Glenn Research Center (GRC) and Goodyear Tire & Rubber, known as the Spring Tire. The Spring Tire consists of several hundred coiled springs woven into a flexible mesh and formed into the shape of a tire. Like the LRV wire mesh tires, the original Spring Tires were made from spring steel and were prone to permanent deformation when undergoing high localized loads. Later, a new iteration of this technology was invented, known as the ‘Superelastic Tire’. This new technology incorporated the use of superelastic SMA springs, which could effectively undergo approximately 30 times more reversible deformation than the steel spring. It also provided even greater durability and allowed for more flexibility in design, such as the use of other structural forms to reduce mass or increase load carrying capacity. Because of the unique nature of both the SMA material and the complex interactions between the springs, designing Spring Tires for a specific application requires extensive effort. Historically, design decisions have relied on full-scale empirical testing; however, this is very expensive and time consuming, especially when multiple iterations are needed. Therefore, developing a large-scale, robust, and predictive numerical model entailing complex spring interactions and the shape memory material behavior within a tire construct is the first essential step towards a successful design program. The current work focuses on implementation of the user-defined Shape Memory Alloy (SMA) model, otherwise known as SMA-GVIPs, in the Finite Element analysis (FEA) program ABAQUS for large-scale simulations of the GRC-developed Spring Tires made of SMA. The novelty of this work lies in the thorough, detail-oriented, and computationally efficient finite element analysis of full-scale SMA tires. A well-thought material characterization plan followed by model validation and a systemic sensitivity study on SMA tires has never been reported in the previous literature. The main objective of this study is to help the team improve and optimize the structural design of the SMA tires through in-depth numerical analysis and sensitivity studies. Various design variables (wire diameter, coil diameter, pitch, bead angle, and number of springs) were varied to study their influence on the global load-displacement response of the tire construct. A detailed investigation of the three-dimensional stress states was also carried out to enhance our understanding of the local changes as the tire goes through global deformation. It was concluded that a robust numerical model with a good predictive capability, together with a thoughtfully crafted sensitivity study can result in improved design iterations required to reach a desired tire performance while, significantly reducing manufacturing, labor and testing expenses. A summary of the Finite Element (FE) model construction will be presented together with a description of the user-defined SMA model, characterization process, experimental results, model validation, and numerical sensitivity study results.

shape memory alloys↗
NASA NTRS1989

Local-global analysis of crack growth in continuously reinfoced ceramic matrix composites

This paper describes the development of a mathematical model for predicting the strength and micromechanical failure characteristics of continuously reinforced ceramic matrix composites. The local-global analysis models the vicinity of a propagating crack tip as a local heterogeneous region (LHR) consisting of spring-like representation of the matrix, fibers and interfaces. Parametric studies are conducted to investigate the effects of LHR size, component properties, and interface conditions on the strength and sequence of the failure processes in the unidirectional composite system.

Ballarini, Roberto↗
DOE OSTI2025

Impacts of the Large Seasonal Cycle of Upwelling Zone Sea Surface Temperatures on the Atmosphere

Abstract The amplitude of the annual cycle of sea surface temperatures (SSTs) within the tropics is the largest in the eastern Atlantic and Pacific Oceans. Upwelling activity in these regions is maximum during late boreal summer and autumn, resulting in cool SSTs, and minimum in spring, leading to warm SSTs. The fundamental question of how this large seasonal cycle affects the atmosphere has received relatively little scientific attention. In this study, we use perturbed-SST experiments in an atmosphere model to identify the effects of the seasonal cycle of upwelling zone SSTs on the atmospheric state. Although annual-mean upwelling zone SSTs are cool, preventing their convective coupling with the free troposphere for much of the year, their boreal spring warmth can activate precipitating convection. We find that in this season, upwelling zone SSTs affect the atmosphere by 1) altering the intensity and position of the local intertropical convergence zone and 2) inducing a thermally forced Matsuno–Gill response, altering subtropical winds. On the seasonal time scale, the Atlantic upwelling zone is more effective than the Pacific in inducing this response. We also find that, consistent with prior work, the Pacific upwelling zone excites extratropical modes of internal atmospheric variability. Upwelling zone SSTs have remained poorly simulated through generations of climate models; our experiments allow us to diagnose the atmospheric biases that arise in response to upwelling zone SST biases. Our experiments show that upwelling zone SST biases are most impactful in boreal spring, particularly over the Atlantic.

Ramesh, Nandini↗
NASA NTRS1992

Actinometric measurement of j(O3-O(1D)) using a luminol detector

The photolysis frequency of ozone to singlet D oxygen atoms has been measured by means of a chemical actinometer using a luminol based detector. The instrument measures j(O3-O(1D)) with a precision of 10 percent. The data collected in winter and spring of 1991 is in agreement with model predictions and previously measured values. Data from a global solar radiometer can be used to estimate the effects of local cloudiness on j(O3-O(1D)).

Bairai, Solomon T.↗
NASA NTRS2001

Flow and Compaction During the Vacuum Assisted Resin Transfer Molding Process

The flow of an epoxy resin and compaction behavior of carbon fiber preform during vacuum- assisted resin transfer molding (VARTM) infiltration was measured using an instrumented tool. Composite panels were fabricated by the VARTM process using SAERTEX(R)2 multi-axial non- crimp carbon fiber fabric and the A.T.A.R.D. SI-ZG-5A epoxy resin. Resin pressure and preform thickness variation was measured during infiltration. The effects of the resin on the compaction behavior of the preform were measured. The local preform compaction during the infiltration is a combination of wetting and spring-back deformations. Flow front position computed by the 3DINFIL model was compared with the experimental data.

Grimsley, Brian W.↗
DOE OSTI2023

Improving snow albedo modeling in the E3SM land model (version 2.0) and assessing its impacts on snow and surface fluxes over the Tibetan Plateau

With the highest albedo of the land surface, snow plays a vital role in Earth's surface energy budget and water cycle. Snow albedo is primarily controlled by snow grain properties (e.g., size and shape) and light-absorbing particles (LAPs) such as black carbon (BC) and dust. The mixing state of LAPs in snow also has impacts on LAP-induced snow albedo reduction and surface radiative forcing (RF). However, most land surface models assume that snow grain shape is spherical and LAPs are externally mixed with the snow grains. This study improves the snow radiative transfer model in the Energy Exascale Earth System Model version 2.0 (E3SM v2.0) Land Model (ELM v2.0) by considering non-spherical snow grain shapes (i.e., spheroid, hexagonal plate, and Koch snowflake) and internal mixing of dust–snow, and it systematically evaluates the impacts on the surface energy budget and water cycle over the Tibetan Plateau (TP). A series of ELM simulations with different treatments of snow grain shape, mixing state of BC–snow and dust–snow, and sub-grid topographic effects (TOP) on solar radiation are performed. Compared with two remote sensing snow products derived from the Moderate Resolution Imaging Spectroradiometer, the control ELM simulation (ELM_Control) with the default configurations of spherical snow grain shape, internal mixing of BC–snow, external mixing of dust–snow, and without TOP as well as the ELM simulation with new model features (ELM_New) can both capture the overall snow distribution reasonably. Additionally, ELM_New overall shows smaller biases in snow cover fraction than ELM_Control in spring when snowmelt is important for water management. The estimated LAP-induced RF in ELM_New ranges from 0 to 19.3 W m -2 with the area-weighted average value of 1.5 W m -2 that is comparable to the reported values in existing studies. The Koch snowflake shape, among other non-spherical shapes, shows the largest difference from the spherical shape in spring when snow processes related to the surface energy budget and water cycle have high importance. The impacts of the mixing state of LAP in snow are smaller than the shape effects and depend on snow grain shape. Compared to external mixing, internal mixing of LAP–snow can lead to larger snow albedo reduction and snowmelt, which further affect the surface energy budget and water cycle. The individual contributions of non-spherical snow shape, mixing state of LAP–snow, and local topography impacts on the snow and surface fluxes have different signs and magnitudes, and their combined effects may be negative or positive due to complex and nonlinear interactions among the factors. Overall, the changes in net solar radiation in spring due to individual and combined effects range from -28.6 to 16.9 W m -2 and -29.7 to 12.2 W m -2 , respectively. This study advances understanding of the role of snow grain shape and mixing state of LAP–snow in land surface processes and offers guidance for improving snow simulations and RF estimates in Earth system models under climate change.

58 GEOSCIENCES↗
DOE OSTI2025

Tonoplast Sucrose Transporter SUT4-Dependent Sugar Partitioning Modulates Phenological Transitions and Reproductive Success in Poplar

Climate uncertainty is intensifying the need for greater plasticity in carbohydrate reserve utilization to support winter survival and spring growth in woody perennials. In poplar, the single-copy SUT4, which encodes a tonoplast-localized sucrose transporter, and the SUT5/SUT6 genome duplicates, which encode plasma membrane-localized transporters, are expressed year-round, with SUT4 showing the highest expression during cool seasons. Given its role in vacuolar sucrose efflux and winter-predominant expression, SUT4 may play a key role in modulating seasonal carbohydrate dynamics. While SUT4-knockdown and knockout effects have been studied under greenhouse conditions, their impact under field conditions remains unexplored. Here, we report a field-based study comparing CRISPR knockout mutants of winter-expressed SUT4 and SUT5/SUT6 in Populus tremula x alba. We show that sut4, but not sut5/6, mutants exhibited earlier autumn leaf senescence, delayed spring bud flush, reduced stem growth, and altered sugar partitioning in winter xylem and bark relative to controls. After 2 years in the field, all genotypes flowered before leaf flush in early spring; however, sut4 mutants produced sterile ovules despite developing normal-looking catkins. Metabolic profiling revealed disrupted sucrose and raffinose dynamics in elongating sut4 catkins. This was accompanied by transcriptomic signatures of elevated stress and downregulation of proanthocyanidin biosynthesis and circadian clock genes. These findings highlight the critical role of SUT4 in coordinating sugar allocation, stress responses, and seasonal development in poplar.

09 BIOMASS FUELS↗