Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “lobe height”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Turbofan forced mixer lobe flow modeling. 1: Experimental and analytical assessment

A joint analytical and experimental investigation of three-dimensional flowfield development within the lobe region of turbofan forced mixer nozzles is described. The objective was to develop a method for predicting the lobe exit flowfield. In the analytical approach, a linearized inviscid aerodynamical theory was used for representing the axial and secondary flows within the three-dimensional convoluted mixer lobes and three-dimensional boundary layer analysis was applied thereafter to account for viscous effects. The experimental phase of the program employed three planar mixer lobe models having different waveform shapes and lobe heights for which detailed measurements were made of the three-dimensional velocity field and total pressure field at the lobe exit plane. Velocity data was obtained using Laser Doppler Velocimetry (LDV) and total pressure probing and hot wire anemometry were employed to define exit plane total pressure and boundary layer development. Comparison of data and analysis was performed to assess analytical model prediction accuracy. As a result of this study a planar mixed geometry analysis was developed. A principal conclusion is that the global mixer lobe flowfield is inviscid and can be predicted from an inviscid analysis and Kutta condition.

Barber, T.↗
DOE OSTI2021

Arctic Soil Patterns Analogous to Fluid Instabilities: Supporting Data

This dataset characterizes solifluction lobe morphology and spatial patterns using pre-existing LiDAR-derived digital elevation models of 25 sites across Norway with accompanying long term climate data for each site. Data were collected as part of an effort to better understand controls on the formation of solifluction patterns and to test the idea that they are analogous to fluid instabilities. We also provide soil velocity profiles and estimates of effective viscosity from across the world, drawn from literature. They were collected to improve our understanding of the rheology of soliflucting soil. See this article for more information on the theoretical motivation behind this dataset see "Arctic soil patterns analogous to fluid instabilities" (Glade et al., 2021). Data files arranged in a hierarchy and include image files *.tif and *.png, GIS shapefiles and geopackages (*.gpkg), *.csv (with same file as *.xlsx), and *.py (Python scripts readable with a text editor). Files also bundled into *.zip files. Note (2021-10-20): unit corrections made on two files: RR.csv and snowfall.csv. The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2006

Non-spherical Lobate Chondrules in CO3.0 Y-81020: General Implications for the Formation of Low-FeO Porphyritic Chondrules in CO Chondrites

Non-spherical chondrules (arbitrarily defined as having aspect ratios greater than or equal to 1.20) in CO3.0 chondrites comprise multi-lobate, distended, and highly irregular objects with rounded margins; they constitute approx. 70% of the type-I (low-FeO) porphyritic chondrules in Y-81020, approx. 75% of such chondrules in ALHA77307, and approx. 60% of those in Colony. Although the proportion of non-spherical type-I chondrules in LL3.0 Semarkona is comparable (approx. 60%), multi-lobate OC porphyritic chondrules (with lobe heights equivalent to a significant fraction of the mean chondrule diameter) are rare. If the non-spherical type-I chondrules in CO chondrites had formed from totally molten droplets, calculations indicate that they would have collapsed into spheres within approx. 10(exp -3) s, too little time for their 20-micrometer-size olivine phenocrysts to have grown from the melt. These olivine grains must therefore be relicts from an earlier chondrule generation; the final heating episode experienced by the non-spherical chondrules involved only minor amounts of melting and crystallization. The immediate precursors of the individual non-spherical chondrules may have been irregularly shaped chondrule fragments whose fracture surfaces were rounded during melting. Because non-spherical chondrules and circular chondrules form a continuum in shape and have similar grain sizes, mineral and mesostasis compositions, and modal abundances of non-opaque phases, they must have formed by related processes. We conclude that a large majority of low-FeO chondrules in CO3 chondrites experienced a late, low-degree melting event. Previous studies have shown that essentially all type-II (high-FeO) porphyritic chondrules in Y-81020 formed by repeated episodes of low-degree melting. It thus appears that the type-I and type-II porphyritic chondrules in Y-81020 (and, presumably, all CO3 chondrites) experienced analogous formation histories. Because these two types constitute approx. 95% of all CO chondrules, it is clear that chondrule recycling was the rule in the CO chondrule-formation region and that most melting events produced only low degrees of melting. The rarity of significantly non-spherical, multi-lobate chondrules in Semarkona may reflect more-intense heating of chondrule precursors in the ordinary-chondrite region of the solar nebula.

Rubin, Alan E.↗
NASA NTRS2009

Optimization of OT-MACH Filter Generation for Target Recognition

An automatic Optimum Trade-off Maximum Average Correlation Height (OT-MACH) filter generator for use in a gray-scale optical correlator (GOC) has been developed for improved target detection at JPL. While the OT-MACH filter has been shown to be an optimal filter for target detection, actually solving for the optimum is too computationally intensive for multiple targets. Instead, an adaptive step gradient descent method was tested to iteratively optimize the three OT-MACH parameters, alpha, beta, and gamma. The feedback for the gradient descent method was a composite of the performance measures, correlation peak height and peak to side lobe ratio. The automated method generated and tested multiple filters in order to approach the optimal filter quicker and more reliably than the current manual method. Initial usage and testing has shown preliminary success at finding an approximation of the optimal filter, in terms of alpha, beta, gamma values. This corresponded to a substantial improvement in detection performance where the true positive rate increased for the same average false positives per image.

false alarm reduction↗
NASA NTRS2010

Modeling Harris Current Sheets with Themis Observations

Current sheets are ubiquitous in nature. occurring in such varied locations as the solar atmosphere. the heliosphere, and the Earth's magnetosphere. The simplest current sheet is the one-dimensional Harris neutral sheet, with the lobe field strength and scale-height the only free parameters. Despite its simplicity, confirmation of the Harris sheet as a reasonable description of the Earth's current sheet has remained elusive. In early 2009 the orbits of the 5 THEMIS probes fortuitously aligned such that profiles of the Earth's current sheet could be modeled in a time dependent manner. For the few hours of alignment we have calculated the time history of the current sheet parameters (scale height and current) in the near-Earth region. during both quiet and active times. For one particular substorm. we further demonstrate good quantitative agreement with the diversion of cross tail current inferred from the Harris modeling with the ionospheric current inferred from ground magnetometer data.

Kepko, L.↗
NASA NTRS1985

Impact studies of a 1/3-scale model of an air cushion vehicle

An experimental investigation was conducted to determine the effects of various parameters of the impact performance of a 1/3-scale dynamic model of an air cushion vehicle. Impact response was determined by measuring the maximum values of variables, including sidelobe, front lobe, and cavity pressures, normal acceleration, pitch and roll angles, and vertical displacement during impact, for various combinations of drop height, initial pitch and roll angles, and forward speed. Increasing initial pitch angle increased the maximum values of the front lobe pressure, normal acceleration, nose down pitch angle, and to some extent, vertical displacement, but it inversely affected the maximum cavity pressure. Increasing the drop height of the model increased the potential energy of the system and generally produced larger responses over the entire range of variables measured, except for the roll angle after impact, which remained constant. Forward speed had no effect on the impact performance of the model, except for essentially doubling the maximum nose down pitch angle after impact at the maximum speed tested.

Daugherty, R. H.↗
NASA NTRS1973

Geometric factors affecting noise suppresion and thrust loss of divergent-lobe supersonic jet noise suppressor

The thrust loss and noise suppression of a divergent-lobe supersonic jet noise suppressor were experimentally determined over a range of nozzle pressure ratios of 1.5 to 4.0. These small-scale cold flow tests were made to determine the effect on thrust and noise of: suppressor length, rearward facing step height, suppressor divergence angle, and ejector shroud length and location. Noise suppression was achieved at nozzle pressure ratios of 2.5 and greater. Maximum lobe jet noise attenuation of 15 db with thrust loss differences of 1.5 percent compared to the convergent nozzle were obtained at a nozzle pressure ratio of 3.5 with an ejector shroud two nozzle diameters long. Without the ejector the attenuation was 13 db with thrust loss differences of 11 percent. Short suppressors approximately one primary nozzle throat diameter long performed as well as longer suppressors. Rearward facing step height had a significant effect on noise suppression. Ejector shrouds two nozzle diameters in length are feasible.

Huff, R. G.↗
NASA NTRS2012

Photogrammetric and Global Positioning System Measurements of Active Pahoehoe Lava Lobe Emplacement on Kilauea, Hawaii

Basalt is the most common rock type on the surface of terrestrial bodies throughout the solar system and -- by total volume and areal coverage -- pahoehoe flows are the most abundant form of basaltic lava in subaerial and submarine environments on Earth. A detailed understanding of pahoehoe emplacement processes is necessary for developing accurate models of flow field development, assessing hazards associated with active lava flows, and interpreting the significance of lava flow morphology on Earth and other planetary bodies. Here, we examine the active emplacement of pahoehoe lobes along the margins of the Hook Flow from Pu'u 'O'o on Kilauea, Hawaii. Topographic data were acquired between 21 and 23 February 2006 using stereo-imaging and differential global positing system (DGPS) measurements. During this time, the average discharge rate for the Hook Flow was 0.01-0.05 cubic m/s. Using stereogrammetric point clouds and interpolated digital terrain models (DTMs), active flow fronts were digitized at 1 minute intervals. These areal spreading maps show that the lava lobe grew by a series of breakouts tha t broadly fit into two categories: narrow (0.2-0.6 m-wide) toes that grew preferentially down-slope, and broad (1.4-3.5 m-wide) breakouts that formed along the sides of the lobe, nearly perpendicular to the down-flow axis. These lobes inflated to half of their final thickness within approx 5 minutes, with a rate of inflation that generally deceased with time. Through a combination of down-slope and cross-slope breakouts, lobes developed a parabolic cross-sectional shape within tens of minutes. We also observed that while the average local discharge rate for the lobe was generally constant at 0.0064 +/- 0.0019 cubic m/s, there was a 2 to 6 fold increase in the areal coverage rate every 4.1 +/- 0.6 minutes. We attribute this periodicity to the time required for the dynamic pressurization of the liquid core of the lava lobe to exceed the cooling-induced strength of the lobe margins. Using DGPS-derived DTMs of the topography before and after pahoehoe lobe emplacement, we observed that the lava typically concentrated within existing topographic lows, with the lobe reaching a maximum thickness of approx 1.2 m above the lowest points of the initial topography and above reverse-facing slopes. Lobe margins were typically controlled by high-standing topography, with the zone directly adjacent to the final flow margin having average relief that is approx 4 cm higher than the lava-inundated region. This suggests that irregularities approx 25% of the height of the smallest breakout elements (i.e., toes) can exert a strong control on the paths of low-discharge pahoehoe lobes, with stagnated toes forming confining margins that allow interior portions of flow to topographically invert the landscape by inflation.

Hamilton, Christopher W.↗
NASA NTRSDate not supplied

Advanced Parametric Lobe Mixer Concepts for Internally Mixed Nozzles

A continuation of efforts to optimize a dual-stream lobe mixer for supersonic commercial flight are detailed, adding scarfing and scalloping features to a baseline lobe mixer previously optimized within a baseline parametric space. These "advanced features" are parameterized by four quantities: scarfing angle 𝜁, scallop height ℎ 𝑠 , scallop depth 𝑑 𝑠 , and scallop conic focal parameter 𝜌 𝑠 . Two baseline mixers, one parallel and one vortical, form the basis for an eighteen-case study to investigate the effects of each parameter in single-axis fashion. Aerodynamic performance is evaluated through velocity coefficient 𝐶 𝑉 . Moderate performance increases are seen with increasing scallop height and depth on the parallel mixer, and with increasing scarfing angle on the vortical mixer. Flowfield analysis is presented through visualization of axial and cross-stream vorticity development through the duct, as well as density variation. A correlation between axial vorticity and density variation decay was found, with earlier introduction of axial vorticity found to result in improved aerodynamic performance and potential noise suppression.

Lobe Mixer↗
NASA NTRS1999

Dual Spacecraft Observations of Lobe Magnetic Field Perturbations Before, During and after Plasmoid Release

This study examines a unique data set returned by IMP8 and Geotail on January 29, 1995 during a substorm which resulted in the ejection of a plasmoid. The two spacecraft (s/c) were situated in the north lobe of the tail and both observed a traveling compression region (TCR). From single s/c observations only the length of the plasmoid in X and an estimate of its height in Z can be determined. However, we show that dual s/c measurements of TCRs can be used to model all three dimensions of the underlying plasmoid and to estimate of its rate of expansion or contraction. For this event plasmoid dimensions of Delta(X) approximates 18, Delta(Y) approximates 30, and Delta(Z) approximates 10 R(sub e) are inferred from the IMP8 and Geotail lobe magnetic field measurements. The earthward end of the plasmoid was inferred to be near the mean location of the near-earth neutral line, X approximates -26 R(sub e). Its center was underneath IMP 8 at X approximates -34 R(sub e) and its tailward end appeared to be near X approximates -44 R(sub e). Furthermore, a factor of approximately 2 increase in the amplitude of the TCR occurred in the 1.5 min it took to move from IMP 8 to Geotail. Modeled using conservation of the magnetic flux, this increase in lobe compression implies that the underlying plasmoid was expanding at a rate of approximately 140 km/s. Such an expansion is comparable to recently reported V(sub y) speeds in "young" plasmoids in this region of the tail. Finally, the Geotail measurements indicate that a reconfiguration of the lobe magnetic field closely followed the ejection of the plasmoid which moved magnetic flux tubes into the wake behind the plasmoid where they would convect into the near-earth neutral line and reconnect.

Slavin, J. A.↗
DOE OSTI2024

The rise and fall of stretched bond errors: Extending the analysis of Perdew–Zunger self-interaction corrections of reaction barrier heights beyond the LSDA

Incorporating self-interaction corrections (SIC) significantly improves chemical reaction barrier height predictions made using density functional theory methods. We present a detailed orbital-by-orbital analysis of these corrections for three semi-local density functional approximations (DFAs) situated on the three lowest rungs of Jacob’s ladder of approximations. The analysis is based on Fermi–Löwdin Orbital Self-Interaction Correction (FLOSIC) calculations performed at several steps along the reaction pathway from the reactants (R) to the transition state (TS) to the products (P) for four representative reactions selected from the BH76 benchmark set. For all three functionals, the major contribution to self-interaction corrections of the barrier heights can be traced to stretched bond orbitals that develop near the TS configuration. The magnitude of the ratio of the self-exchange–correlation energy to the self-Hartree energy (XC/H) for a given orbital is introduced as an indicator of one-electron self-interaction error. XC/H = 1.0 implies that an orbital’s self-exchange–correlation energy exactly cancels its self-Hartree energy and that the orbital, therefore, makes no contribution to the SIC in the FLOSIC scheme. For the practical DFAs studied here, XC/H spans a range of values. Here, the largest values are obtained for stretched or strongly lobed orbitals. We show that significant differences in XC/H for corresponding orbitals in the R, TS, and P configurations can be used to identify the major contributors to the SIC of barrier heights and reaction energies. Based on such comparisons, we suggest that barrier height predictions made using the strongly constrained and appropriately normed meta-generalized gradient approximation may have attained the best accuracy possible for a semi-local functional using the Perdew–Zunger SIC approach.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1976

Gas dynamics of semidetached binaries. II - The vertical structure of the stream

The letter considers the three-dimensional dynamics of the stream in semidetached binaries undergoing Roche-lobe overflow. Results of an earlier communication are generalized to include the dynamic effects in the direction perpendicular to the orbital plane. It is found that the scale height of the stream characteristically exceeds its corresponding hydrostatic value by a significant factor because the inertia of the gas prevents it from responding instantaneously to the changing gravitational field. This effect is important for the interpretation of observations relating to stream-disk impacts in cataclysmic variables and in binary X-ray sources of low total mass.

Lubow, S. H.↗
NASA NTRS2014

SDO and STEREO Observations of Prominence Dynamics During a Series of Eight Homologous Flares

Homologous flares are eruptive events that occur repetitively in the same active region, with similar structure and morphology. A series of at least eight homologous flares occurred in active region NOAA 11237 over 16 - 17 June 2011. A filament is rooted in the active region with an overlying coronal cavity. The active region appears on the southeast solar limb as seen from SDO/AIA, and on the disk as viewed from STEREO-B/EUVI; the dual perspective allows us to study in detail behavior of prominence/filament material entrained in the magnetic field of the repeatedly-erupting system. Each of the eruptions was mainly confined, with active-region prominence material being ejected from the core of the erupting region onto outer-lobe loops of the active region. The eruption series repeatedly disrupted material of a quiet-Sun extension of the prominence, and that material became suspended at progressively higher heights above the surface. Two final eruptions from the core region destabilized the field holding that material, instigating a coronal mass ejection (CME).

homologous flares↗
NASA NTRS2018

Far-Field Pattern Measurement and Simulation of VHF Antenna at 60 MHz for Europa Clipper Mission

This paper presents measurements and simulations of a linearly polarized VHF folded dipole operating at 60 MHz for NASA’s upcoming Europa Clipper mission. The spacecraft contains a ground penetrating radar, consisting of an array of four VHF antennas, that will characterize the surface of Jupiter’s icy moon Europa. Measured far-field radiation patterns and reflection coefficients above a 50×80m perfect ground plane are compared to predicted results using commercial software. Normalized Far-Field radiation pattern cuts are measured utilizing a biconical antenna and receiver mounted on a flying drone. Simulations of the radiation pattern show that the number of lobes increases with the distance of the antenna from the ground due to the ground-bounce phenomenon. In addition, the measured and simulated reflection coefficients stay unchanged for height above 2 meters, which matches the predicted calculation of the reactive-near field region of this antenna. However, the antenna electrical parameters are optimized for use on the spacecraft and become detuned in the presence of a ground plane. Simulated and measured return loss discrepancy less than 0.5 dB is presented. Radiation pattern comparisons show similar agreement when taking into account the effect of far-field measurement uncertainties.

Decrossas, Emmanuel↗
NASA NTRS1983

Stacked-disc structure for fluid filter or valve silencer

A stacked-disc structure is comprised of a stack of annular discs (13) scalloped along the outer edge to provide lobes (13a) and etched on one side to provide lands (13a). A web (13d) is retained in the lobes to strengthen the discs so that they will not collapse due to high fluid pressure. The stack of discs is retained by a housing (10) having a fluted interior wall to retain the ends of the lobes. End plates (11 and 12) secure the stack of discs with a spacer (14) at one end having lands (14a) on lobes which match the lobes of the stacked discs to allow fluid to flow into, or out of, the spaces between the lobes of the stacked discs. The spaces between the lands on the etched discs provide passages for fluid flow into or out of the hollow core of the stack. The height of the lands (i.e., depth of the etch) determines the size of the smallest particle that will be permitted to flow through. The stacked-disc structure may be connected to the inlet of a valve, or be incorporated into the valve housing on the inlet side of the valve seat to assure substantially constant fluid velocity, and thereby reduce valve noise when the valve is operated.

Hagler, Jr., Ray↗
NASA NTRS1988

Interference by rain scatter

The data from Japan and the U.S. (the Virginia Precipitation Scatter Experiment) show excellent agreement between the two-component rain scatter model predictions and bistatic scatter measurements. In employing the model, all the scattering geometries should be classified as backscattering as defined by Crane (1974). The forward scatter model should only be used for great circle paths with both antennas pointed at the horizon and at each other in a typical troposcatter communication system geometry. The forward scatter model can also be used for main-lobe, side-lobe coupling when one antenna is pointed toward the other along the great circle path. The forward scatter observations made over the Prospect Hill - Mt Tug path show that the two-component model is incomplete. Much stronger signals were observed at Ku-band than expected based on simultaneous C-band measurements. The discrepancies may be due to: (1) scattering by ice/snow at height (posssible in April) at the 1 km height of the scattering volume), (2) the coherent effects of turbulent fluctuations in the hydrometeor number densities and (3) errors in the modeling of the statistical relationship between attenuation along the path and scattering in the common volume.

Crane, Robert K.↗
NASA NTRS1980

Martian rampart and pedestal craters' ejecta-emplacement Coprates quadrangle

A study of the Martian rampart and pedestal craters in the Coprates quadrangle is presented. Relationships between crater size and ejecta-blanket areal extents imply a maximum ejecta-blanket thickness or maximum rim height for Martian rampart craters; the limiting thickness is encountered only for craters exceeding 6 km diameter. The larger craters have an additional component of internal flow of the ejecta caused by the greater weight of their thicker ejecta deposits, although smaller rampart craters have ejecta which appears to have undergone flow during emplacement; pedestal craters most likely result from impacts into less volatile-rich substrates which produce a less fluidized ejecta and no flow lobes.

Mutch, P.↗
NASA NTRS2012

Hands-Free Transcranial Color Doppler Probe

Current transcranial color Doppler (TCD) transducer probes are bulky and difficult to move in tiny increments to search and optimize TCD signals. This invention provides miniature motions of a TCD transducer probe to optimize TCD signals. The mechanical probe uses a spherical bearing in guiding and locating the tilting crystal face. The lateral motion of the crystal face as it tilts across the full range of motion was achieved by minimizing the distance between the pivot location and the crystal face. The smallest commonly available metal spherical bearing was used with an outer diameter of 12 mm, a 3-mm tall retaining ring, and 5-mm overall height. Small geared motors were used that would provide sufficient power in a very compact package. After confirming the validity of the basic positioning concept, optimization design loops were completed to yield the final design. A parallel motor configuration was used to minimize the amount of space wasted inside the probe case while minimizing the overall case dimensions. The distance from the front edge of the crystal to the edge of the case was also minimized to allow positioning of the probe very close to the ear on the temporal lobe. The mechanical probe is able to achieve a +/-20deg tip and tilt with smooth repeatable action in a very compact package. The enclosed probe is about 7 cm long, 4 cm wide, and 1.8 cm tall. The device is compact, hands-free, and can be adjusted via an innovative touchscreen. Positioning of the probe to the head is performed via conventional transducer gels and pillows. This device is amendable to having advanced software, which could intelligently focus and optimize the TCD signal.

Chin, Robert↗