Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “laser stripping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Laser System Design and Operation for SNS H- Beam Laser Stripping

Recently, a high-efficiency laser assisted hydrogen ion (H-) beam stripping was successfully carried out in the Spallation Neutron Source (SNS) accelerator. The experiment was not only an important step toward foil-less H- stripping for charge exchange injection, it also served as a first example of using megawatt ultraviolet (UV) laser in an operational high power proton accelerator facility. This talk reports the design, implementation, and commissioning results of the macropulse laser system, laser transport line, and laser operation for the laser stripping experiment. The macropulse laser consists of a mode-locked picosecond pulsed seed laser and a burst-mode Nd:YAG laser amplifier. The general design concept can be adapted to any temporal beam structures in most accelerators. We have achieved UV pulses with the pulse widths varying between 34 to 54 ps and a maximum peak power over 3.5 MW. A laser transport line is installed to deliver the UV beam to the laser stripping chamber at a transmission efficiency of 70%. Laser operation including remote control and monitor of laser parameters will be described.

Liu, Yun↗

STATUS OF LASER STRIPPING AT THE SNS

This paper presents an overview of experimental and theoretical studies on laser stripping that have been conducted up to the present time in the SNS project. The goal of this work is to develop techniques to achieve the experimental preconditions necessary for the successful realization of a future intermediate experiment on laser stripping. The experimental work consists of the tuning and measurement of H beam parameters in readiness for the intermediate experiment, and also takes into account the features and possibilities of the SNS accelerator.

Gorlov, Timofey V↗

Sequential excitation scheme for laser stripping of hydrogen ion beams

A novel laser stripping scheme based on sequential ex-citation has been proposed for foil-less charge-exchange injection of hydrogen ion (H-) beams. Our analysis indi-cates that the new scheme can save the laser power by an order of magnitude for certain particle beam energies. An application to 1.3-GeV hydrogen ion beams is described.

Liu, Yun↗

SNS Laser Stripping for H- Injection

The ORNL spallation neutron source (SNS) user facility requires a reliable, intense beams of protons. The technique of H<sup>-</sup> charge exchange injection into a storage ring or synchrotron has the potential to provide the needed beam currents, but it will be limited by intrinsic limitations of carbon and diamond stripping foils. A laser in combination with magnetic stripping has been used to demonstrate a new technique for high intensity proton injection, but several problems need to be solved before a practical system can be realized. Technology developed for use in Free Electron Lasers is being used to address the remaining challenges to practical implementation of laser controlled H<sup>-</sup> charge exchange injection for the SNS. These technical challenges include (1) operation in vacuum, (2) the control of the UV laser beam to synchronize with the H<sup>-</sup> beam and to shape the proton beam, (3) the control and stabilization of the Fabry-Perot resonator, and (4) protection of the mirrors from radiation.

43 PARTICLE ACCELERATORS↗

FUTURE PROSPECTS FOR LASER STRIPPING INJECTION IN HIGH INTENSITY MACHINES

With the increase of average power of present and future high intensity proton rings and rapid progress of laser technology, laser-assisted stripping become a real alternative for carbon foils that are used for charge-exchange injection. High efficiency laser stripping, achieved experimentally at Spallation Neutron Source in Oak Ridge, TN, paved the way to full scale devices of such type. This paper presents overview of machines and choices of parameters for future powerful accelerators with possible laser stripping use.

43 PARTICLE ACCELERATORS↗

Creating intense polarized electron beam via laser stripping and spin-orbit interaction

The recent advance in laser field make it possible to excite and strip electrons with definite spin from hydrogen atoms. The sources of hydrogen atoms with orders of magnitude higher currents (than that of the conventional polarized electron cathods) can be obtained from H{sup -} sources with good monochromatization. With one electron of H{sup -} stripped by a laser, the remained electron is excited to upper state (2P{sup 3/2} and 2P{sup 1/2}) by a circular polarization laser light from FEL. Then, it is excited to a high quantum number (n=7) with mostly one spin direction due to energy level split of the states with a definite direction of spin and angular momentum in an applied magnetic field and then it is stripped by a strong electric field of an RF cavity. This paper presents combination of lasers and fields to get high polarization and high current electron source.

08 HYDROGEN↗

LASER STRIPPING COMPUTING WITH THE PYTHON ORBIT CODE

The laser assisted hydrogen stripping becomes a widely discussed alternative for the existing stripping foil approach. The simulation tool for this new approach is presented. The created application is implemented in form of extension module to the Python ORBIT parallel code that is under development at the SNS. The physical model of the application deals with quantum theory and allows calculating evolution and ionization of hydrogen atoms and ions affected by superposition of electromagnetic and laser fields. The algorithm, structure, benchmark cases, and results of simulations for several future and existing accelerators are discussed.

Gorlov, Timofey V↗

FIRST STEPS TOWARD LASER STRIPPING IMPLEMENTATION

Thin carbon foils are used as strippers for charge exchange injection into high intensity proton rings. However, the stripping foils become radioactive and produce uncontrolled beam loss, which is one of the main factors limiting beam power in high intensity proton rings. Recently, the first laser-assisted high efficiency conversion of H- beam into protons was successfully demonstrated for a short laser pulse at Spallation Neutron Source project in Oak Ridge, Tennessee. The next step will be to build a stripping device to make 1-10 microsecond pulses stripping. The associated problems and possible solutions for projects with large ranges of H- beam energies are described.

43 PARTICLE ACCELERATORS↗

Laser Stripping of Hydrogen Atoms by Direct Ionization

Direct ionization of hydrogen atoms by laser irradiation is investigated as a potential new scheme to generate proton beams without stripping foils. The time-dependent Schrödinger equation describing the atom-radiation interaction is numerically solved obtaining accurate ionization cross-sections for a broad range of laser wavelengths, durations and energies. Parameters are identified where the Doppler frequency up-shift of radiation colliding with relativistic particles can lead to efficient ionization over large volumes and broad bandwidths using currently available lasers.

43 PARTICLE ACCELERATORS↗

Modified Fabrication for InGaAsP Strip Laser

Improved fabrication of InGaAsP stripe lasers involves replacement of oxide stripe in quaternary laser by an n-type layer of InP grown on top of quaternary cap layer. Process allows use of stop etch that selectively removes InP and does not etch InGaAsP, making fabrication especially convenient.

Ladany, I.↗

Design and development of equipment for laser wire stripping

Three laser wire strippers have been built for the stripping of Kapton-insulated wire, the baseline wire of the space shuttle orbiter. The strippers are: (1) a bench-model stripper powered with a cw CO2 10.6-micron laser, (2) a hand-held stripper powered with a cw 1.06-micron Nd-YAG laser with an output of 5-7 watts, and (3) a hand-held stripper with a five-inch-long CO2 laser inside the stripping head.

Iceland, W. F.↗

Strip Velocity Measurements for Gated X-Ray Imagers Using Short Pulse Lasers

Strip velocity measurements of gated X-ray imagers are presented using an ultra-short pulse laser. Obtaining time-resolved X-ray images of inertial confinement fusion shots presents a difficult challenge. One diagnostic developed to address this challenge is the gated X-ray imagers. The gated X-ray detectors (GXDs) developed by Lawrence Livermore National Laboratory and Los Alamos National Laboratory use a microchannel plate (MCP) coated with a gold strip line, which serves as a photocathode. GXDs are used with an array of pinholes, which image onto various parts of the GXD image plane. As the pulse sweeps over the strip lines, it creates a time history of the event with consecutive images. In order to accurately interpret the timing of the images obtained using the GXDs, it is necessary to measure the propagation of the pulse over the strip line. The strip velocity was measured using a short pulse laser with a pulse duration of approximately 1-2 ps. The 200nm light from the laser is used to illuminate the GXD MCP. The laser pulse is split and a retroreflective mirror is used to delay one of the legs. By adjusting the distance to the mirror, one leg is temporally delayed compared to the reference leg. The retroreflective setup is calibrated using a streak camera with a 1 ns full sweep. Resolution of 0.5 mm is accomplished to achieve a temporal resolution of ~5 ps on the GXD strip line.

detectors, x-ray, short pulse lasers↗

Selected developments in laser wire stripping

The operation of mechanical and thermal strippers and the early development of laser wire strippers are reviewed. NASA sponsored development of laser wire stripping for space shuttle includes bench-type strippers as well as an advanced portable hand-held stripper which incorporates a miniaturized carbon dioxide laser and a rotating optics unit with a gas-jet assist and debris exhaust. Drives and controls girdle the wire and slit the remaining slug without manual assistance. This unit can strip wire sizes 26 through 12 gage. A larger-capacity hand-held unit for wire sizes through 1/0 gage was built using a neodynium-doped yttrium aluminum garnet (Nd:YAG) laser. The hand-held units have a flexible umbilical cable to an accompanying cart that carries the power supply, gas supply, cooling unit, and the controls.

Source record↗

Flow in Rotating Serpentine Coolant Passages With Skewed Trip Strips

Laser velocimetry was utilized to map the velocity field in serpentine turbine blade cooling passages with skewed trip strips. The measurements were obtained at Reynolds and Rotation numbers of 25,000 and 0.24 to assess the influence of trips, passage curvature and Coriolis force on the flow field. The interaction of the secondary flows induced by skewed trips with the passage rotation produces a swirling vortex and a corner recirculation zone. With trips skewed at +45 deg, the secondary flows remain unaltered as the cross-flow proceeds from the passage to the turn. However, the flow characteristics at these locations differ when trips are skewed at -45 deg. Changes in the flow structure are expected to augment heat transfer, in agreement with the heat transfer measurements of Johnson, et al. The present results show that trips are skewed at -45 deg in the outward flow passage and trips are skewed at +45 deg in the inward flow passage maximize heat transfer. Details of the present measurements were related to the heat transfer measurements of Johnson, et al. to relate fluid flow and heat transfer measurements.

Tse, David G.N.↗

Towards Operational Scalability for H⁻ Laser Assisted Charge Exchange

The experimental development of H⁻ laser assisted charge exchange, a.k.a. laser stripping, has been ongoing at the SNS accelerator since 2006 in a three-phase approach. The first two phases associated with proof-of-principle and proof-of-practicality experiments have been successfully completed and demonstrated >95% H⁻ stripping efficiency for up to 10 us. The final phase is a proof-of-scalability stage to demonstrate that the method can be deployed for realistic beam duty factors. The experimental component of this effort is centered on achieving high efficiency stripping through the use of a laser power amplification scheme to recycle the macropulse laser light at the interaction point of the H⁻ stripping. Such a recycling cavity will be necessary for any future operational laser stripping system with at least millisecond duration H⁻ pulses. A second component of the proof-of-scalability phase is to develop a conceptual design for a realistic laser stripping scheme. The status of these efforts and challenges associated with deploying the recycling cavity into the laser stripping experiment will be described in this talk.

43 PARTICLE ACCELERATORS↗

Laser wire stripping

Bench-mounted and hand-held laser units cut insulation from wires without nipping or scraping conductor. Process eliminates quality control problems and is fast, clean, precise, and repeatable.

Heisman, R. M.↗