Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “kinematic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

The roles of kinematic constraint and diffusion in non-equilibrium solid state phase transformations of Ti-6Al-4V

A solid state phase transformation of Ti-6Al-4V was studied using high speed in situ x-ray diffraction measurements made during rapid cooling of a cold metal transfer arc weld bead deposited onto a water cooled substrate. Analysis of body centered cubic (BCC) and hexagonal close packed (HCP) lattices revealed an abrupt, nonlinear shift in the lattice parameters of both phases just after the HCP phase had nucleated. Postmortem transmission electron microscopy confirmed that V diffusion was mostly suppressed during cooling. Together, these results indicate that at this cooling rate of approximately 10 4 K/s, which is representative of cooling rates of many additive manufacturing and welding processes, kinematic coherency of the BCC–HCP interfaces gives rise to the anomalous lattice expansion and contraction behaviors of both phases during the initial nucleation and growth stages of (mostly) martensitic transformation from BCC to HCP; the role of diffusion in such lattice anomalies is shown to be minimal.

36 MATERIALS SCIENCE↗

Spatially resolved gas and stellar kinematics in compact starburst galaxies

The kinematics of galaxies provide valuable insights into their physics and assembly history. Kinematics are governed not only by the gravitational potential, but also by merger events and stellar feedback processes such as stellar winds and supernova explosions. We aim to identify what governs the kinematics in a sample of SDSS-selected nearby starburst galaxies, by obtaining spatially resolved measurements of the gas and stellar kinematics. We obtained near-infrared integral-field K-band spectroscopy with VLT/SINFONI for 15 compact starburst galaxies. We derived the integrated as well as spatially resolved stellar and gas kinematics. The stellar kinematics were derived from the CO absorption bands, and Paα and Brγ emission lines were used for the gas kinematics. Based on the integrated spectra, we find that the majority of galaxies have gas and stellar velocity dispersion that are comparable. A spatially resolved comparison shows that the six galaxies that deviate show evidence for a bulge or stellar feedback. Two galaxies are identified as mergers based on their double-peaked emission lines. In our sample, we find a negative correlation between the ratio of the rotational velocity over the velocity dispersion (v rot /σ) and the star formation rate surface density. We propose a scenario where the global kinematics of the galaxies are determined by gravitational instabilities that affect both the stars and gas. This process could be driven by mergers or accretion events. Effects of stellar feedback on the ionised gas are more localised and detected only in the spatially resolved analysis. The mass derived from the velocity dispersion provides a reliable mass even if the galaxy cannot be spatially resolved. The technique used in this paper is applicable to galaxies at low and high redshift with the next generation of infrared-focussed telescopes (JWST and ELT).

79 ASTRONOMY AND ASTROPHYSICS↗

Kinematic Variables and Feature Engineering for Particle Phenomenology

Kinematic variables have been playing an important role in collider phenomenology, as they expedite discoveries of new particles by separating signal events from unwanted background events and allow for measurements of particle properties such as masses, couplings, spins, etc. For the past 10 years, an enormous number of kinematic variables have been designed and proposed, primarily for the experiments at the Large Hadron Collider, allowing for a drastic reduction of high-dimensional experimental data to lower-dimensional observables, from which one can readily extract underlying features of phase space and develop better-optimized data-analysis strategies. We review these recent developments in the area of phase space kinematics, summarizing the new kinematic variables with important phenomenological implications and physics applications. We also review recently proposed analysis methods and techniques specifically designed to leverage the new kinematic variables. As machine learning is nowadays percolating through many fields of particle physics including collider phenomenology, we discuss the interconnection and mutual complementarity of kinematic variables and machine learning techniques. We finally discuss how the utilization of kinematic variables originally developed for colliders can be extended to other high-energy physics experiments including neutrino experiments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Next-to-$\mathrm{MHV}$ Yang-Mills kinematic algebra

Kinematic numerators of Yang-Mills scattering amplitudes possess a rich Lie algebraic structure that suggest the existence of a hidden infinite-dimensional kinematic algebra. Explicitly realizing such a kinematic algebra is a longstanding open problem that only has had partial success for simple helicity sectors. In past work, we introduced a framework using tensor currents and fusion rules to generate BCJ numerators of a special subsector of NMHV amplitudes in Yang-Mills theory. Here we enlarge the scope and explicitly realize a kinematic algebra for all NMHV amplitudes. Master numerators are obtained directly from the algebraic rules and through commutators and kinematic Jacobi identities other numerators can be generated. Inspecting the output of the algebra, we conjecture a closed-form expression for the master BCJ numerator up to any multiplicity. We also introduce a new method, based on group algebra of the permutation group, to solve for the generalized gauge freedom of BCJ numerators. It uses the recently introduced binary BCJ relations to provide a complete set of NMHV kinematic numerators that consist of pure gauge.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Covariant color-kinematics duality

We show that color-kinematics duality is a manifest property of the equations of motion governing currents and field strengths. For the nonlinear sigma model (NLSM), this insight enables an implementation of the double copy at the level of fields, as well as an explicit construction of the kinematic algebra and associated kinematic current. As a byproduct, we also derive new formulations of the special Galileon (SG) and Born-Infeld (BI) theory. For Yang-Mills (YM) theory, this same approach reveals a novel structure — covariant color-kinematics duality — whose only difference from the conventional duality is that 1/$\square$ is replaced with covariant 1/D 2 . Remarkably, this structure implies that YM theory is itself the covariant double copy of gauged biadjoint scalar (GBAS) theory and an F 3 theory of field strengths encoding a corresponding kinematic algebra and current. Directly applying the double copy to equations of motion, we derive general relativity (GR) from the product of Einstein-YM and F 3 theory. This exercise reveals a trivial variant of the classical double copy that recasts any solution of GR as a solution of YM theory in a curved background. Covariant color-kinematics duality also implies a new decomposition of tree-level amplitudes in YM theory into those of GBAS theory. Using this representation we derive a closed-form, analytic expression for all BCJ numerators in YM theory and the NLSM for any number of particles in any spacetime dimension. By virtue of the double copy, this constitutes an explicit formula for all tree-level scattering amplitudes in YM, GR, NLSM, SG, and BI.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tracing the outflow kinematics in Type 2 active galactic nuclei

Here, we used a sample of 577 spectra of active galactic nuclei Type 1.8-2 (z < 0.25) taken from the Sloan Digital Sky Survey to trace the influence of the outflow kinematics on the profiles of different emission lines (Hβ, [O III], Hα, [N II], [S II]). All considered lines were fitted with two Gaussian components: one that fits the core of the line, and another that fits the wings. We provide a procedure for decomposition of the Hα+[N II] wavelength band for spectra where these lines overlap. The influence of the gravitational and non-gravitational kinematics on the line components is investigated by comparing the dispersions of the line components with stellar velocity dispersion. We find that wing components of all the considered emission lines have pure non-gravitational kinematics. The core components are consistent with gravitational kinematics for the Hα, [N II], and [S II] lines, while in the [O III] there is evidence for contribution from non-gravitational kinematics. We adopted the wing components as a proxy for the outflow contribution and investigated the outflow kinematics by analysing the correlations between the widths and shifts of the wing components of different lines. For this purpose, we used the subsets in which wing components are detected in both compared lines, and can be fitted independently. We find strong correlations between wing component shifts, as well as between wing component widths of all considered lines, with the exception of the Hβ wing component width. These correlations indicate that outflow dynamics systemically affect all emission lines in the spectrum. However, it reflects with a different strength in their profiles, which is observed as different widths of the wing components. This is investigated by comparison of the mean widths of the wing components in subsets where wing components are present in all lines. The strongest outflow signature is observed in the [O III] lines, which have the broadest wing components; weaker outflow signatures are found in Hα and [N II], and the weakest is found for [S II]. These results imply that the considered lines arise in different parts of an outflowing region.

79 ASTRONOMY AND ASTROPHYSICS↗

Planets Across Space and Time (PAST). II. Catalog and Analyses of the LAMOST–Gaia–Kepler Stellar Kinematic Properties

The Kepler telescope has discovered over 4000 planets (candidates) by searching ~200,000 stars over a wide range of distance (order of kpc) in our Galaxy. Characterizing the kinematic properties (e.g., Galactic component membership and kinematic age) of these Kepler targets (including the planet candidate hosts) is the first step toward studying Kepler planets in the Galactic context, which will reveal fresh insights into planet formation and evolution. In this paper, the second part of the Planets Across the Space and Time (PAST) series, by combining the data from the Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST) and Gaia and then applying the revised kinematic methods from PAST I, we present a catalog of kinematic properties (i.e., Galactic positions, velocities, and the relative membership probabilities among the thin disk, thick disk, Hercules stream, and the halo) as well as other basic stellar parameters for 35,835 Kepler stars. Further analyses of the LAMOST–Gaia–Kepler catalog demonstrate that our derived kinematic age reveals the expected stellar activity-age trend. Furthermore, we find that the fraction of thin (thick) disk stars increases (decreases) with the transiting planet multiplicity (N {sub p} = 0, 1, 2 and 3+) and the kinematic age decreases with N {sub p}, which could be a consequence of the dynamical evolution of planetary architecture with age. The LAMOST–Gaia–Kepler catalog will be useful for future studies on the correlations between the exoplanet distributions and the stellar Galactic environments as well as ages.

47 OTHER INSTRUMENTATION↗

The kinematic properties of Milky Way stellar halo populations

ABSTRACT In the Gaia era, stellar kinematics are extensively used to study Galactic halo stellar populations, to search for halo structures, and to characterize the interface between the halo and hot disc populations. We use distribution function-based models of modern data sets with 6D phase space data to qualitatively describe a variety of kinematic spaces commonly used in the study of the Galactic halo. Furthermore, we quantitatively assess how well each kinematic space can separate radially anisotropic from isotropic halo populations. We find that scaled action space (the ‘action diamond’) is superior to other commonly used kinematic spaces at this task. We present a new, easy to implement selection criterion for members of the radially anisotropic Gaia–Enceladus merger remnant. Assuming a 1:1 ratio of Gaia–Enceladus stars to more isotropic halo, we find our selection achieves a sample purity of 86 per cent in our models with respect to contamination from the more isotropic halo. We compare this criterion to literature criteria, finding that it produces the highest purity in the resulting samples, at the expense of a modest reduction in completeness. We also show that selection biases that underlie nearly all contemporary spectroscopic data sets can noticeably impact the E−Lz distribution of samples in a manner that may be confused for real substructure. We conclude by providing recommendations for how authors should use stellar kinematics in the future to study the Galactic stellar halo.

79 ASTRONOMY AND ASTROPHYSICS↗

The role of breakup and coalescence in fine-scale bubble-induced turbulence. II. Kinematics

This second part of our research explores the kinematic aspect of fine-scale bubble-induced turbulence (BIT) to (i) present the effect of bubble breakup and coalescence and (ii) compare it against the universal kinematic fine-scale turbulence characteristics reported in the literature. To this end, we simulate a dilute bubbly system of 0.5% void fraction using two distinct numerical simulations. In the volume-of-fluid (VoF) simulation, bubbles undergo breakup and coalescence. In the immersed boundary method (IBM) simulation, however, they act as rigid spheres. We also perform a simulation of classical homogeneous isotropic turbulence (HIT). The first important outcome of this study is that BIT is radically different from HIT in terms of its kinematic fine-scale characteristics. In the vorticity-dominating regions, BIT exhibits a weak vortex stretching. This weak vortex stretching is due to (a) the intermediate strain-rate eigenvalues skewed weakly to positive and (b) the extensive strain-rate eigenvector aligning perpendicular to the vorticity vector. The BIT has, on average, not only a weak enstrophy production but also a weak strain production in strain-dominating regions. The weak strain production is due to (a) the presence of vortex stretching in highly strained fluid elements and (b) the absolute magnitude of compressive strain-rate eigenvalue being as close to the extensive strain-rate eigenvalue. Thus, none of the kinematic fine-scale HIT characteristics is noted for BIT. The second important conclusion is that bubble breakup and coalescence play little to no influence on the kinematics of fine-scale BIT as VoF and IBM simulations produce similar results.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Kinematics of Proal Chewing in Rats

Chewing kinematics are well-documented in several mammal species with fused mandibular symphyses, but relatively understudied in mammals with an unfused symphysis, despite the fact that more than half of extant Mammalia have an unfused mandibular symphysis. The Wistar brown rat (Rattus norvegicus) is widely used in human health research, including studies of mastication or neurological studies where mastication is the output behavior. These animals are known to have unfused mandibular symphyses and proal jaw (rostrocaudal) motion during occlusion, but the lack of high resolution, 3-dimensional analysis of rat chewing leaves the functional significance of symphyseal mobility unknown. We used biplanar fluoroscopy and the X-ray reconstruction of moving morphology workflow to quantify chewing kinematics in 3 brown rats, quantifying overall jaw kinematics, including motions about the temporomandibular joint and unfused mandibular symphysis. During occlusion, the teeth and the mandibular condyle translate almost exclusively anteriorly (proal) during occlusion, with little motion in any other degrees of freedom. At the symphysis, we observed minimal flexion throughout the chew cycle. Overall, there are fundamental differences in jaw kinematics between rats and other mammals and therefore rats are not an appropriate proxy for ancestral mammal jaw mechanics. Additionally, differences between humans and rat chewing kinematics must be considered when using rats as a clinical model for pathological feeding research.

59 BASIC BIOLOGICAL SCIENCES↗

Signatures of a Tidally Induced Spiral Arm at the Anticenter of the Milky Way and a Kinematically Extended Anticenter Stream Using DESI Data Release 2

Using the Dark Energy Spectroscopic Instrument (DESI) Milky Way Survey, we examine the six-dimensional space of the anticenter region of the Milky Way stellar disk (150° < Galactic longitude < 220°) using 61,883 main-sequence turnoff stars. We focus on two well-known stellar overdensities in the anticenter: the Monoceros Ring (MRi) and Anticenter Stream (ACS). We find that the MRi overdensity has kinematic signatures consistent with a tidally induced spiral arm, a type of dynamic spiral arm created by an interaction with a satellite galaxy, most likely the Sagittarius dwarf spheroidal galaxy (Sgr). We use the kinematics of the MRi to calculate the two most recent passage times of Sgr, finding 0.25 ± 0.09 Gyr and 1.10 ± 0.23 Gyr from the present day. We validate that the ACS is kinematically decoupled from the MRi because they are moving in opposite radial and vertical directions. We find that the kinematics associated with the ACS extends beyond our defined overdensity. The features we see in the ACS region are likely part of a broader distribution of stars with the same kinematic signature as detected in other places, like the vertical wave in the outer disk and phase spiral.

Lambert, Mika [University of California, Santa Cru↗

Inferring safety critical events from vehicle kinematics in naturalistic driving environment: Application of deep learning Algorithms

Advances in sensing technology has enabled the collection of countless terabytes of second-by-second kinematics data. Such data provides opportunities for real-time monitoring of driving behavior and identification of safety critical events (SCEs) including crashes and near crashes. The concept of volatility is relevant in this context, which identifies instability and erratic variations in driving behavior prior to involvement in SCEs. This study utilized vehicle kinematics from a large-scale naturalistic driving data to develop a deep learning approach based on 1D convolutional neural networks (CNN) for inferring SCEs. The data are unique in the sense that such accurate pre-crash data at high fidelity are not available in traditional crash repositories. This study contributes to the literature by providing a first attempt at predicting responses to SCEs by developing deep learning-based CNN architectures using novel driving volatility based kinematic thresholds for a sample of 9553 events. The key contribution lies in developing a volatility-based CNN input layout that is acceptable to CNN schemes and represents the motion kinematics such as speed, acceleration and volatility measures. Several 1D-CNN architectures were developed using layers, numbers of convolutions, layer patterns, and kernels. Shallow and deep architectures were tested, revealing higher accuracy of shallow architectures in detecting SCEs. The optimal number of epochs were identified using an early stopping method while the CNN performance was improved by increasing the number of epochs. The ensemble CNN had the highest predictive accuracy of 95.6% for detection of crashes and near crashes, which was 2.5% higher than the optimal CNN using 20% hold out test data. The ensemble CNN also outperformed classical machine learning models and model performance reported in past studies on detection of SCEs. Finally, these results have implications for identification of safety hotspots and providing real-time alerts and warnings in connected and highly automated vehicle environment including society of automotive engineers levels 3–5.

42 ENGINEERING↗

Robust clustering of the local Milky Way stellar kinematic substructures with Gaia eDR3

Understanding local stellar kinematic substructures in the solar neighbourhood helps build a complete picture of the formation of the Milky Way, as well as an empirical phase space distribution of dark matter that would inform detection experiments. We apply the clustering algorithm HDBSCAN on the Gaia early third data release to identify a list of stable clusters in velocity space and action-angle space by taking into account the measurement uncertainties and studying the stability of the clustering results. We find 1405 (497) stars in 23 (6) robust clusters in velocity space (action-angle space) that are consistently not associated with noise. We discuss the kinematic properties of these structures and study whether many of the small clusters belong to a similar larger cluster based on their chemical abundances. They are attributed to the known structures: the Gaia Sausage-Enceladus, the Helmi Stream, and globular cluster NGC 3201 are found in both spaces, while NGC 104 and the thick disc (Sequoia) are identified in velocity space (action-angle space). Although we do not identify any new structures, we find that the HDBSCAN member selection of already known structures is unstable to input kinematics of the stars when resampled within their uncertainties. We therefore present the stable subset of local kinematic structures, which are consistently identified by the clustering algorithm, and emphasize the need to take into account error propagation during both the manual and automated identification of stellar structures, both for existing ones as well as future discoveries.

79 ASTRONOMY AND ASTROPHYSICS↗

On duality of color and kinematics in (A)dS momentum space

We explore color-kinematic duality for tree-level AdS/CFT correlators in momentum space. We start by studying the bi-adjoint scalar in AdS at tree-level as an illustrative example. We follow this by investigating two forms of color-kinematic duality in Yang-Mills theory, the first for the integrated correlator in AdS 4 and the second for the integrand in general AdS d +1 . For the integrated correlator, we find color-kinematics does not yield additional relations among n -point, color-ordered correlators. To study color-kinematics for the AdS d +1 Yang-Mills integrand, we use a spectral representation of the bulk-to-bulk propagator so that AdS diagrams are similar in structure to their flat space counterparts. Finally, we study color KLT relations for the integrated correlator and double-copy relations for the AdS integrand. We find that double-copy in AdS naturally relates the bi-adjoint theory in AdS d +3 to Yang-Mills in AdS d +1 . We also find a double-copy relation at three-points between Yang-Mills in AdS d +1 and gravity in AdS d– 1 and comment on the higher-point generalization. By analytic continuation, these results on AdS/CFT correlators can be translated into statements about the wave function of the universe in de Sitter.

gauge-gravity correspondence↗

Color-kinematics dual representations of one-loop matrix elements in the open-superstring effective action

Abstract Theα ′ -expansion of string theory provides a rich set of higher-dimension operators, indexed byζvalues, which can be used to study color-kinematics duality and the double copy. These two powerful properties, actually first noticed in tree-level string amplitudes, simplify the construction of both gauge and gravity amplitudes. However, their applicability and limitations are not fully understood. We attempt to construct a set of color-kinematics dual numerators at one loop and four points for insertions of operator combinations corresponding to the lowest fourζ 2 -free operator insertions from the open superstring:ζ 3 ,ζ 5 ,$$ {\zeta}_3^2 $$ ζ 3 2 , andζ 7 . We succeed in finding a representation for the first three in terms of box, triangle, and bubble numerators. In the case ofζ 7 we find an obstruction to a fully color-dual representation related to the bubble-on-external-leg type diagrams. We discuss two paths around this obstruction, both of which signal an incompatability between color-kinematics duality and manifesting certain desired properties. Using the constructed color-dual numerators, we find two different Bern-Carrasco-Johansson double copies that produce candidate closed-string-insertion numerators. Both approaches to the double copy match the kinematics of the cuts, with relative normalization set by either summing over both double copies including degeneracy or by including an explicit prefactor on the double-copy numerator definitions.

Physics↗

Higher-order kinematical effects in deeply virtual Compton scattering

We study the deeply virtual Compton scattering cross-section in twist-two generalized parton distribution (GPD) approximation, and show that different choices of light-cone vectors and gauges for the final photon polarization will lead to different higher-order kinematical corrections to the cross-section formula. The choice of light-cone vectors affects kinematic corrections at the twist-three level, accounting for the differences between the cross-section formulas in the literature. On the other hand, kinematical corrections from higher-twist GPDs should eliminate the light-cone dependence at twist three. Those light-cone dependencies are studied systematically at JLab 12 GeV and future EIC kinematics. They serve as the intrinsic systematic uncertainties in extracting the Compton form factors through the cross-section formula. More importantly, they are also necessary for understanding cross-section measurements with higher-twist precision and to reconstruct higher-order Compton form factors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The influence of kinematics of deformation on polycrystalline halite dynamic recrystallization: Full-field simulation of simple shear versus pure shear

Rock salt, composed mainly of halite, flows viscoplastically over a wide range of geological conditions, strongly impacting the dynamic evolution of sedimentary basins and orogens. Understanding how dislocation creep, which involves dislocation glide, intracrystalline recovery and dynamic recrystallization, influences the microstructure and rheology of halite under various deformation kinematics and temperatures is crucial for enhancing knowledge of salt flow dynamics. Here, this study employs a full-field numerical simulation method to compare the viscoplastic deformation of polycrystalline halite under simple shear and pure shear conditions up to a natural strain of ε = 1.5 at temperatures ranging from 100 °C to 300 °C. The results are presented in terms of crystallographic preferred orientation (CPO), grain shape preferred orientation (SPO), subgrain boundary direction, grain size and strain rate distribution. The results indicate that the crystallographic anisotropy of individual halite crystals is transferred to the polycrystalline scale, resulting in strain localization, particularly in simple shear simulations. The kinematics of deformation affect the evolution and distribution of high strain-rate bands, determining the direction of intragranular substructures and the morphology of strain-induced grain boundaries, with minimal impact on grain size. The intensity of grain boundary migration increases with temperature, significantly influencing grain morphology and size, thereby obscuring strain localization, while having little effect on CPOs. At low strain (ε < 1.0), CPOs relative to both the maximum shortening direction and the grain SPO are similar regardless of the deformation kinematics. At high strain (ε > 1.0), simple shear CPOs exhibit three stronger {100} maxima with a monoclinic symmetry relative to the grain SPO compared to the six {100} maxima with an orthotropic symmetry relative to the grain SPO generated under pure shear. Therefore, microstructures and CPOs can serve as indicators of the strain path in polycrystalline halite under various conditions, aiding in determining the shear sense and elucidating the deformation kinematics of salt structures.

58 GEOSCIENCES↗

Disentangling multiple gas kinematic drivers in the Perseus galaxy cluster

Galaxy clusters, the Universe’s largest halo structures, are filled with an X-ray-emitting gas with a temperature between 10 million and 100 million degrees. Their evolution is shaped by energetic processes such as feedback from supermassive black holes (SMBHs) and mergers with other cosmic structures. The imprints of these processes on gas kinematics remain largely unknown, restricting our understanding of energy conversion within clusters4. High-resolution spectral mapping with the X-Ray Imaging and Spectroscopy Mission (XRISM) observatory offers a way forward. Here we present XRISM kinematic measurements of the Perseus cluster, radially covering the extent of its cool core. We find direct evidence for at least two dominant drivers of gas motions operating on distinct physical scales: a small-scale driver in the inner approximately 60 kpc, probably associated with the SMBH feedback; and a large-scale driver in the outer core, powered by mergers. This finding suggests that, during the active phase, SMBH feedback drives gas motions, which, if fully dissipated into heat, could have a substantial role in offsetting radiative cooling losses in the Perseus core. Furthermore, our study underscores the necessity of kinematic mapping observations of extended sources to robustly characterize the velocity fields and their role in the evolution of massive halos. It further offers a kinematic diagnostic for SMBH feedback models.

Astronomy and AstroPhysics↗