SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
From end of intro: ...We would like to show that for certain problems in systems and control theory, there exist algorithms for which corresponding (xi) can be viewed as a certain measure of robustness, e.g., stability margin.
In this paper we introduced and developed the theory of Modified Interior Distance Functions (MIDF's). The MIDF is a Classical Lagrangian (CL) for a constrained optimization problem which is equivalent to the initial one and can be obtained from the latter by monotone transformation both the objective function and constraints. In contrast to the Interior Distance Functions (IDF's), which played a fundamental role in Interior Point Methods (IPM's), the MIDF's are defined on an extended feasible set and along with center, have two extra tools, which control the computational process: the barrier parameter and the vector of Lagrange multipliers. The extra tools allow to attach to the MEDF's very important properties of Augmented Lagrangeans. One can consider the MIDFs as Interior Augmented Lagrangeans. It makes MIDF's similar in spirit to Modified Barrier Functions (MBF's), although there is a fundamental difference between them both in theory and methods. Based on MIDF's theory, Modified Center Methods (MCM's) have been developed and analyzed. The MCM's find an unconstrained minimizer in primal space and update the Lagrange multipliers, while both the center and the barrier parameter can be fixed or updated at each step. The MCM's convergence was investigated, and their rate of convergence was estimated. The extension of the feasible set and the special role of the Lagrange multipliers allow to develop MCM's, which produce, in case of nondegenerate constrained optimization, a primal and dual sequences that converge to the primal-dual solutions with linear rate, even when both the center and the barrier parameter are fixed. Moreover, every Lagrange multipliers update shrinks the distance to the primal dual solution by a factor 0 less than gamma less than 1 which can be made as small as one wants by choosing a fixed interior point as a 'center' and a fixed but large enough barrier parameter. The numericai realization of MCM leads to the Newton MCM (NMCM). The approximation for the primal minimizer one finds by Newton Method followed by the Lagrange multipliers update. Due to the MCM convergence, when both the center and the barrier parameter are fixed, the condition of the MDF Hessism and the neighborhood of the primal ninimizer where Newton method is 'well' defined remains stable. It contributes to both the complexity and the numerical stability of the NMCM.
This paper proposes a novel prediction method for online optimal control allocation that extends the volume of moments achievable with the Moore-Penrose generalized inverse to the entire Attainable Moment Set. This method formulates the control allocation problem using selected basis vectors and associated gains which reduces the optimization problem dimensions and provides physical insight into the resulting optimal solutions. The proposed algorithm finds the entire family of unique optimal control solutions along the desired moment vector from the origin to the boundary of the Attainable Moment Set. Numerical results for the Moore-Penrose prediction method show that the unique minimal controls obtained yield the desired moment with near machine precision accuracy while maintaining control effectors within specified position limits. This method has been fully validated against the unique solution obtained on the boundary of the Attainable Moment Set using the Durham Direct Allocation method. Minimal control solutions obtained for moments in the interior of the Attainable Moment Set, similarly yield the desired moment to near machine precision while providing control solutions that are smaller (i.e. 2-norm) than solutions found with traditional control allocation algorithms (e.g. interior point methods) applied to the minimal control problem. Numerical simulations using a Matlab® autocoded executable (MEX) for the representative real world problem of 3-moments with 20 individual control effectors and prescribed control position limits show a mean computation speed of approximately 125 Hz which is sufficient to enable real-time flight allocation.
The Split Coefficient Matrix (SCM) finite difference method for solving hyperbolic systems of equations is presented. This new method is based on the mathematical theory of characteristics. The development of the method from characteristic theory is presented. Boundary point calculation procedures consistent with the SCM method used at interior points are explained. The split coefficient matrices that define the method for steady supersonic and unsteady inviscid flows are given for several examples. The SCM method is used to compute several flow fields to demonstrate its accuracy and versatility. The similarities and differences between the SCM method and the lambda-scheme are discussed.
The steady flow in two-dimensional and axisymmetric nozzles was computed using a time-dependent method. In this method the interior mesh points were computed using the MacCormack finite-difference scheme, while a characteristic scheme was used to calculate the boundary mesh points. No explicit artificial viscosity term was included. The fluid was assumed to be a perfect gas. This method was used to compute the flow in a 45 deg - 15 deg conical, converging-diverging nozzle, a 15 deg conical, converging nozzle, and a 10 deg conical, plug nozzle. Good agreement between the numerical solution and experimental data was found. In contrast to previous time-dependent methods, the computational times were less than one minute on a CDC 6600 computer.
A user's guide is presented for ACCESS-3, a research oriented program which combines dual methods and a collection of approximation concepts to achieve excellent efficiency in structural synthesis. The finite element method is used for structural analysis and dual algorithms of mathematical programming are applied in the design optimization procedure. This program retains all of the ACCESS-2 capabilities and the data preparation formats are fully compatible. Four distinct optimizer options were added: interior point penalty function method (NEWSUMT); second order primal projection method (PRIMAL2); second order Newton-type dual method (DUAL2); and first order gradient projection-type dual method (DUAL1). A pure discrete and mixed continuous-discrete design variable capability, and zero order approximation of the stress constraints are also included.
The formulation and the implementation of boundary conditions within the context of the quadrature-free form of the discontinuous Galerkin method are presented for several types of boundary conditions for the Euler equations. An important feature of the discontinuous Galerkin method is that the interior point algorithm is well behaved in the neighborhood of the boundary and requires no modifications. This feature leads to a simple and accurate treatment for wall boundary conditions and simple inflow and outflow boundary conditions. Curved walls are accurately treated with only minor changes to the implementation described in earlier work. The 'perfectly matched layer' approach to nonreflecting boundary conditions is easily applied to the discontinuous Galerkin. The compactness of the discontinuous Galerkin method makes it better suited for buffer-zone-type methods than high-order finite-difference methods. Results are presented for wall, characteristic inflow and outflow, and nonreflecting boundary conditions.
Two methods are outlined for imposing interpatch curvature continuity in existing Bezier bicubic patch surfaces. Each method assumes that coordinates of the corners of the patches can not be altered but the interior Bezier control point can. Each method also preserves outer edge slope and outer corner twist derivatives. Neither method requires intersection or C0 continuity nor slope or C1 continuity at the start. A computer program for each method is given in the appendices.
The download on the wing produced by the rotor-induced downwash of a tilt rotor aircraft in hover is of major concern because of its severe impact on payload-carrying capability. A method has been developed to help gain a better understanding of the fundamental fluid dynamics that causes this download, and to help find ways to reduce it. In particular, the method is employed in this work to analyze the effect of a tangential leading edge circulation-control jet on download reduction. Because of the complexities associated with modeling the complete configuration, this work focuses specifically on the wing/rotor interaction of a tilt rotor aircraft in hover. The three-dimensional, unsteady, thin-layer compressible Navier-Stokes equations are solved using a time-accurate, implicit, finite difference scheme that employs LU-ADI factorization. The rotor is modeled as an actuator disk which imparts both a radical and an azimuthal distribution of pressure rise and swirl to the flowfield. A momentum theory blade element analysis of the rotor is incorporated into the Navier-Stokes solution method. Solution blanking at interior points of the mesh has been shown here to be an effective technique in introducing the effects of the rotor and tangential leading edge jet. Results are presented both for a rotor alone and for wing/rotor interaction. The overall mean characteristics of the rotor flowfield are computed including the flow acceleration through the rotor disk, the axial and swirl velocities in the rotor downwash, and the slipstream contraction. Many of the complex tilt rotor flow features are captured including the highly three-dimensional flow over the wing, the recirculation fountain at the plane of symmetry, wing leading and trailing edge separation, and the large region of separated flow beneath the wing. Mean wing surface pressures compare fairly well with available experimental data, but the time-averaged download/thrust ratio is 20-30 percent higher than the measured value. The discrepancy is due to a combination of factors that are discussed. Leading edge tangential blowing, of constant strength along the wing span, is shown to be effective in reducing download. The jet serves primarily to reduce the pressure on the wing upper surface. The computation clearly shows that, because of the three-dimensionality of the flowfield, optimum blowing would involve a spanwise variation in blowing strength.
The new Structured Mapping At Reduced dimension Topology elements (SMART) method for the accurate calculation of derivatives at multiblock structured grid block interfaces is presented. In the SMART method, a ’local’ curvilinear mapping is defined at each interface point, giving a consistent multidimensional definition of the derivatives. The resulting system of equations is overdetermined, and a least squares method is used to determine the value of the derivatives in the local coordinate system. In the special case of a nonsingular interface point, the SMART method automatically recovers the spatial differencing stencils used at the interior points in the neighboring grid blocks.
It is pointed out that interior noise levels of propeller driven aircraft are substantially higher than levels measured for other types of CTOL aircraft. Reduction of interior noise of such aircraft requires a knowledge of the relative importance of the acoustic and structural noise transmission paths. Noise entering the aircraft interior via an acoustic path is the noise radiated by an external noise source (propellers, exhaust noise), which propagates through the acoustic medium (air) and is then transmitted through the aircraft fuselage. This type of incoming noise is referred to as airborne noise. Noise entering the aircraft interior via a structural path is the noise which has its source in the vibrational energy which has been transmitted through the structure from a remote vibrational energy source (engines, wind flutter). This type of incoming noise is referred to as structureborne noise. A new method for separating airborne and structureborne noise is presented. It is based on two-microphone cross spectral acoustic intensity measurements.
Implicit methods developed by Beam and Warming (1978 and Briley and McDonald (1977) make it possible to overcome the hyperbolic stiffness of the conservative compressible Navier-Stokes equations in the fine wall region computational mesh for high Reynold's number flow. Certain difficulties related to the use of these methods could be overcome by employing an approach reported by Roe (1981). In the present investigation Roe's conceptual framework has been adopted for constructing globally conservative finite difference methods. A globally conservative upwind finite difference method (CSCM) consisting of both implicit interior point and boundary point equations is constructed from a new characteristics based flux difference splitting. It is found that the employed upwind eigenvector split scheme which combines fully coupled implicit interior point and boundary point approximations has the desired properties of robust stability and accuracy.
The Rai (1984,85) patch-boundary scheme for the Euler equations is described. The integration methods used to update the interior grid points are are discussed. Stability of patch-boundary schemes and the use of these schemes in Navier-Stokes calculations are mentioned. Results for inviscid, supersonic flow over a cylinder, blast wave diffraction by ramp, and the motion of a vortex in a freestream are presented. These test cases demonstrate the quality of solutions possible with the scheme.
Three-dimensional orbits in the vicinity of the interior libration point of the sun-earth/moon barycenter system are currently being considered for use with a number of missions planned for the 1990s. Since such libration-point trajectories are generally unstable, spacecraft moving on these paths must use some form of trajectory control to remain close to their nominal orbit. The primary goal of this effort is the development of a stationkeeping strategy applicable to such trajectories. A method is presented that uses maneuvers executed impulsively at discrete time intervals. The analysis includes some investigation of a number of the problem parameters that affect the overall maneuver costs. Simulations are designed to provide representative stationkeeping costs for a spacecraft moving in a libration-point trajectory, and preliminary results are summarized.
A numerical method for simultaneously and efficiently coupling an external subsonic potential flow and an interior viscous flow such that the two flows match at an interfacing boundary is discussed. Both a panel method and a simple point compressible vortex model are used for the outer potential field. The interior flow solvers which were used are the Navier-Stokes and Euler codes of T. J. Coakley and the Euler code of A. Verhoff. In order to test compatibility, the panel method is coupled to the less expensive Euler codes since the coupling procedure is identical with the Navier-Stokes code. The results show significant efficiency improvements can be obtained over the uncoupled approach. Results also indicate the outer potential flow is best represented by the simple point compressible vortex model. The panel method couples smoothly to Coakley's implicit code but is numerically incompatible as coupled with the explicit Euler code. An improved Navier-Stokes code is under initial development which extends the Euler code to include the necessary viscous terms. Results are shown for all infinite length channel with one wavy periodic wall with and without laminar separation.
The admissible boundary conditions for the unsteady Navier-Stokes equations are insufficient to determine completely the flow variables at grid points on the boundaries of a finite computational domain. A general method is presented in which the boundary conditions are supplemented by conservatively differenced forms of the flow equations. For implicit algorithms, the method provides a fully implicit coupling between boundary and interior points. Implicit boundary-point computation schemes are given for most types of flow boundary encountered in internal and external flow problems. Convergence to steady state is generally faster than with locally explicit boundary-point schemes.
A multigrid-mask method for solution of incompressible Navier-Stokes equations in primitive variable form has been developed. The main objective is to apply this method in conjunction with the pseudospectral element method solving flow past multiple objects. There are two key steps involved in calculating flow past multiple objects. The first step utilizes only Cartesian grid points. This homogeneous or mask method step permits flow into the interior rectangular elements contained in objects, but with the restriction that the velocity for those Cartesian elements within and on the surface of an object should be small or zero. This step easily produces an approximate flow field on Cartesian grid points covering the entire flow field. The second or heterogeneous step corrects the approximate flow field to account for the actual shape of the objects by solving the flow field based on the local coordinates surrounding each object and adapted to it. The noise occurring in data communication between the global (low frequency) coordinates and the local (high frequency) coordinates is eliminated by the multigrid method when the Schwarz Alternating Procedure (SAP) is implemented. Two dimensional flow past circular and elliptic cylinders will be presented to demonstrate the versatility of the proposed method. An interesting phenomenon is found that when the second elliptic cylinder is placed in the wake of the first elliptic cylinder a traction force results in a negative drag coefficient.
The motivation of this work is the ongoing effort at the Center for Turbulence Research (CTR) to use large eddy simulation (LES) techniques to calculate the noise radiated by jet engines. The focus on engine exhaust noise reduction is motivated by the fact that a significant reduction has been achieved over the last decade on the other main sources of acoustic emissions of jet engines, such as the fan and turbomachinery noise, which gives increased priority to jet noise. To be able to propose methods to reduce the jet noise based on results of numerical simulations, one first has to be able to accurately predict the spatio-temporal distribution of the noise sources in the jet. Though a great deal of understanding of the fundamental turbulence mechanisms in high-speed jets was obtained from direct numerical simulations (DNS) at low Reynolds numbers, LES seems to be the only realistic available tool to obtain the necessary near-field information that is required to estimate the acoustic radiation of the turbulent compressible engine exhaust jets. The quality of jet-noise predictions is determined by the accuracy of the numerical method that has to capture the wide range of pressure fluctuations associated with the turbulence in the jet and with the resulting radiated noise, and by the boundary condition treatment and the quality of the mesh. Higher Reynolds numbers and coarser grids put in turn a higher burden on the robustness and accuracy of the numerical method used in this kind of jet LES simulations. As these calculations are often done in cylindrical coordinates, one of the most important requirements for the numerical method is to provide a flow solution that is not contaminated by numerical artifacts. The coordinate singularity is known to be a source of such artifacts. In the present work we use 6th order Pade schemes in the non-periodic directions to discretize the full compressible flow equations. It turns out that the quality of jet-noise predictions using these schemes is especially sensitive to the type of equation treatment at the singularity axis. The objective of this work is to develop a generally applicable numerical method for treating the singularities present at the polar axis, which is particularly suitable for highly accurate finite-differences schemes (e.g., Pade schemes) on non-staggered grids. The main idea is to reinterpret the regularity conditions developed in the context of pseudo-spectral methods. A set of exact equations at the singularity axis is derived using the appropriate series expansions for the variables in the original set of equations. The present treatment of the equations preserves the same level of accuracy as for the interior scheme. We also want to point out the wider utility of the method, proposed here in the context of compressible flow equations, as its extension for incompressible flows or for any other set of equations that are solved on a non-staggered mesh in cylindrical coordinates with finite-differences schemes of various level of accuracy is straightforward. The robustness and accuracy of the proposed technique is assessed by comparing results from simulations of laminar forced-jets and turbulent compressible jets using LES with similar calculations in which the equations are solved in Cartesian coordinates at the polar axis, or in which the singularity is removed by employing a staggered mesh in the radial direction without a mesh point at r = 0.