Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “interfacial evolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Anodic Interfacial Evolution in Extremely Fast Charged Lithium-Ion Batteries

Interfacial reaction mechanisms at the anode/separator interface play a central role in the performance and safety of lithium-ion batteries during fast charging. We report a mechanistic study on the evolution and interactions of the aging mechanisms at the anode/separator interface in lithium cobalt oxide/graphite pouch cells charged with variable charging rates (1–6C) over 10 cycles. In situ electrochemical measurements, including voltage relaxation, Coulombic efficiency, and direct current internal resistance, indicated an incremental lithium loss until the C rates were ≤5C. A substantial capacity fade is observed in the first few cycles of fast charging, but the magnitude of capacity fade progressively diminishes with the number of cycles, indicating a suppression in the lithium deposition mechanism. Post-mortem film thickness, X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM) analyses were performed to elucidate the evolution of electrolyte decomposition, the solid–electrolyte interface (SEI), lithium plating, and film fracture mechanisms with C rate. XPS measurements confirmed an increasing lithium concentration in an SEI film with an increase in the C rate. SEM images showed a growth of dendritic lithium on the anode surface from 1C to 3C. Precrack formation leading to an interfacial film fracture was observed at higher C rates. Furthermore, a differential analysis of the discharge capacity indicated a possible two-phase delithiation from the anode and reduced cathodic lithiation due to lithium loss at high C rates.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Impact of Gold Thickness on Interfacial Evolution and Subsequent Embrittlement of Tin–Lead Solder Joints

Although gold remains a preferred surface finish for components used in high-reliability electronics, rapid developments in this area have left a gap in the fundamental understanding of solder joint gold (Au) embrittlement. Furthermore, as electronic designs scale down in size, the effect of Au content is not well understood on increasingly smaller solder interconnections. As a result, previous findings may have limited applicability. The current study focused on addressing these gaps by investigating the interfacial microstructure that evolves in 63Sn-37Pb solder joints as a function of Au layer thickness. Those findings were correlated to the mechanical performance of the solder joints. Increasing the initial Au concentration decreased the mechanical strength of a joint, but only to a limited degree. Kirkendall voids were the primary contributor to low-strength joints, while brittle fracture within the intermetallic compounds (IMC) layers is less of a factor. The Au embrittlement mechanism appears to be self-limiting, but only once mechanical integrity is degraded. Sufficient void evolution prevents continued diffusion from the remaining Au.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Sulfate-Controlled Heterogeneous CaCO 3 Nucleation and Its Non-linear Interfacial Energy Evolution

Unveiling the effects of an environmental abundant anion “sulfate” on the formation of calcium carbonate (CaCO 3 ) is essential to understand the formation mechanisms of biominerals like corals and brachiopod shells, as well as the scale formation in desalination systems. However, it was experimentally challenging to elucidate the sulfate–CaCO 3 interactions at the explicit first step of CaCO 3 formation: nucleation. In addition, there is limited quantitative information on the precise control of nucleation kinetics. Here, heterogeneous CaCO 3 nucleation is monitored in real time as a function of sulfate concentrations (0–10 mM Na 2 SO 4 ) using synchrotron-based grazing incidence X-ray scattering techniques. The results showed that sulfate can be incorporated in the nuclei, resulting in a nearly 90% decrease in the CaCO 3 nucleation rate, causing a 120% increase in the CaCO 3 nucleus size, and inhibiting the vaterite-to-calcite phase transformation. Moreover, this work quantitatively relates sulfate concentrations to the effective interfacial energies of CaCO 3 and finds a non-linear trend, suggesting that CaCO 3 heterogeneous nucleation is more sensitive at a low sulfate concentration. This study can be readily extended to study other additives and obtain quantitative relationships between additive concentrations and CaCO 3 interfacial energies, a key step toward achieving natural and engineered controls on CaCO 3 nucleation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Effects of Zr substitution on soot combustion over cubic fluorite-structured nanoceria: Soot-ceria contact and interfacial oxygen evolution

Ceria is widely used as a catalyst for soot combustion, but effects of Zr substitution on the reaction mechanism is ambiguous. The present work elucidates effects of Zr substitution on soot combustion over cubic fluorite-structured nanoceria. The nanostructured CeO 2 , Ce 0.92 Zr 0.08 O 2 , and Ce0.84Zr0.16O2 composed of 5–6 nm crystallites display Tm-CO 2 (the temperature at maximum CO 2 yield) at 383, 355, and 375°C under 10 vol.% O 2 /N 2 , respectively. Additionally, the size of agglomerate decreases from 165.5 to 51.9–57.3 nm, which is beneficial for the soot-ceria contact. Moreover, Zr increases the amount of surface oxygen vacancies, generating more active oxygen (O2- and O-) for soot oxidation. Thus, the activities of Ce 0.92 Zr 0.08 O 2 and Ce 0.84 Zr 0.16 O 2 in soot combustion are better than that of CeO2. Although oxygen vacancies promote the migration of lattice O 2- , the enriched surface Zr also inhibits the mobility of lattice O 2- . Therefore, the Tm-CO 2 of Ce 0.84 Zr 0.16 O 2 is higher than that of Ce 0.92 Zr 0.08 O 2 . Based on reaction kinetic study, soot in direct contact with ceria preferentially decomposes with low activation energy, while the oxidation of isolated soot occurs through diffusion with high activation energy. The obtained findings provide new understanding on the soot combustion over nanoceria.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

In Situ Characterization of Interface Evolution in Argyrodite‐Based All‐Solid‐State Li Batteries

Interfacial stability is one of the critical challenges in all-solid-state Li metal batteries. Multiple processes such as solid electrolyte (SE) decomposition and lithium dendrite growth take place at the solid interfaces during cycling, leading to the overall cell failure. To deconvolute these complex processes, in situ characterization is of paramount importance to elucidate the interfacial evolution on the SE upon Li plating/stripping. Herein, an all-solid-state asymmetric in situ cell is developed that allows the direct visualization of the highly localized Li plating/stripping processes under the optical microscope. Moreover, this cell configuration enables reliable post-mortem chemical and morphological analysis of the intact SE/Li interface. Using combined scanning electron microscopy and energy-dispersive X-ray spectroscopy, the study reveals that the evolution of the Li argyrodite interface is strongly influenced by the current density, particularly in terms of chemical distribution and Li plating morphology. More specifically, the solid interface is LiCl-rich with the formation of Li cubes at low current densities, while high currents result in more uniform elemental distribution and filament morphology. These findings elucidate the dynamic evolution mechanism at solid interfaces and offer valuable guidance for developing stable solid interfaces in all-solid-state Li metal batteries.

Huang, Di↗
DOE OSTI2025

Unraveling Impurity-Dependent Morphological and Chemical Evolution of Ni–20Cr Alloy in Eutectic LiCl–KCl Molten Salt

Understanding the interfacial evolution of alloys in molten salt with different amounts of water (H 2 O) and oxygen (O 2 ) impurities is significant for applications in many fields, including concentrated solar power, molten salt reactors, and applications in pyrochemical reprocessing and electrorefining. Additionally, the impurity-driven corrosion mechanisms that lead to various morphological and chemical evolution characteristics at the interfaces of structural alloys and molten salts are not fully understood. In the present work, the three-dimensional (3D) morphological evolution of Ni-20Cr microwires in LiCl-KCl was studied at 500 °C under different moisture and oxygen conditions using in situ synchrotron transmission X-ray microscopy (TXM) and scanning transmission electron microscopy (STEM) techniques. No significant morphological changes were observed in Ni-20Cr microwires under vacuum conditions. However, the wires exhibited distinct morphological evolutions when exposed to molten salt containing H 2 O alone, as well as when both H 2 O and O 2 were present. Furthermore, Cr 2 O 3 precipitates were observed in the molten salt during corrosion with only H 2 O present, while Cr 6+ species were identified in the salt when O 2 was added. Further, these findings are crucial for understanding the corrosion mechanisms of molten salt with different amounts of H 2 O and O 2 contamination, providing insights for developing corrosion mitigation methods and improving the stability of containment alloys in molten salt applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Exploring Cr and molten salt interfacial interactions for molten salt applications

Molten salts play an important role in various energy-related applications such as high-temperature heat transfer fluids and reaction media. However, the extreme molten salt environment causes the degradation of materials, raising safety and sustainability challenges. A fundamental understanding of material–molten salt interfacial evolution is needed. This work studies the transformation of metallic Cr in molten 50/50 mol% KCl–MgCl 2 via multi-modal in situ synchrotron X-ray nano-tomography, diffraction and spectroscopy combined with density functional theory (DFT) and ab initio molecular dynamics (AIMD) simulations. Notably, in addition to the dissolution of Cr in the molten salt to form porous structures, a δ-A15 Cr phase was found to gradually form as a result of the metal–salt interaction. This phase change of Cr is associated with a change in the coordination environment of Cr at the interface. DFT and AIMD simulations provide a basis for understanding the enhanced stability of δ-A15 Cr vs. bcc Cr, by revealing their competitive phase thermodynamics at elevated temperatures and probing the interfacial behavior of the molten salt at relevant facets. This study provides critical insights into the morphological and chemical evolution of metal–molten salt interfaces. Finally, the combination of multimodal synchrotron analysis and atomic simulation also offers an opportunity to explore a broader range of systems critical to energy applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Unveiling the Role of Lithium Iodide in Stabilizing Solid Interfaces in All-Solid-State Li Metal Batteries

A critical challenge in all-solid-state lithium metal batteries (ASSLMBs) is achieving a stable interface between the lithium metal anode and the solid electrolyte. Leveraging its success in Li/I 2 batteries, lithium iodide has garnered significant attentions for its potential to enhance interfacial stability and overall cell performance in ASSLMBs. Here, we elucidate the role of lithium iodide in stabilizing the solid interface in all-solid-state Li metal batteries with a Li argyrodite electrolyte, particularly focusing on its influence on lithium deposition behavior and interfacial evolution. Through in situ optical imaging, we demonstrate more uniform lithium deposition on an iodide-contained argyrodite electrolyte compared to a chloride-based counterpart. Complementary density functional theory calculations attribute improved lithium plating behavior to the enhanced lithiophilicity and better ionic conductivity of lithium iodide at the solid interface, effectively reducing localized current density. In conclusion, these findings provide useful insights into the mechanisms through which lithium iodide enhances the interfacial stability in ASSLMBs.

Anions↗
DOE OSTI2025

Achieving Electrode Smoothing by Controlling the Nucleation Phase of Metal Deposition Through Polymer‐Substrate Binding

Polymer additives [like polyethylene oxide (PEO)] are widely used for smooth electrode deposition in aqueous zinc and many other battery systems. However, the precise mechanism by which they regulate morphology and suppress dendrite formation remains unclear. In this study, the knowledge gap is addressed by using in situ electrochemical atomic force microscopy to directly observe the interfacial evolution during Zn electrodeposition and polymer adsorption on Cu substrates in the presence of varying concentrations of ZnSO 4 and PEO. Contrary to previous literature assumptions, which emphasize the binding to the growing Zn crystal surfaces or Zn 2+ ions, the results demonstrate that PEO smooths Zn films by promoting nucleation of (002)-oriented Zn platelets through interactions with the Cu substrate. Density functional theory simulations support this finding by showing that PEO adsorption on Cu modifies the interfacial energy of Zn/Cu/electrolyte interfaces, favoring the stabilization of Zn (002) on the Cu substrate, as well as confines Zn electrodeposition to a narrow near-surface region. In conclusion, these findings elucidate a novel design principle for electrode smoothing, emphasizing the importance of substrate selection paired with polymer additives that exhibit an attractive interaction with the substrate but minimal interaction with growing crystals, offering a mechanistic perspective for improved battery performance.

Electrodeposition↗
DOE OSTI2025

Decoding Gas Evolution Pathways and Interfacial Chemistry in Layered Oxide Cathodes for Safer Sodium‐Ion Batteries

Sodium-ion batteries (SIBs) are attractive for the low cost and abundance of sodium. Yet, gas evolution—a critical challenge in SIBs—remains underexplored. Here, online electrochemical mass spectrometry is used to probe gas evolution in layered oxide cathodes with various compositions, cutoff voltages, dopants, and particle morphologies. Compared to LiNiO 2 (LNO), NaNiO 2 releases more gas, even at lower states of charge, due to the higher covalency of Ni─O bond caused by the more ionic Na─O bond through the inductive effect. Among Co, Mn, Al, and Mg, Mn and Mg doping suppress gas release most effectively by enhancing the metal-oxygen bond strength. NaNi 1/3 Fe 1/3 Mn 1/3 O 2 (NFM) cathodes synthesized via coprecipitation (CP-NFM) and solid-state routes exhibit distinct particle morphologies; CP-NFM exhibits more gas evolution, yet secondary particle morphology helps reduce it through differential cathode-electrolyte reactivity between inner and outer primary particles. Among Li, Ti, Mg, and Cu doping in NFM, Li has the largest effect, reducing gas levels comparable to LNO. Nuclear magnetic resonance and X-ray photoelectron spectroscopies reveal that electrolyte solvent decomposition mainly produces organic-rich cathode-electrolyte interphase (CEI) rather than soluble species. NaPF 6 salt further exacerbates cathode-electrolyte reactions, forming surface Na 2 O species. The findings provide actionable guidance for designing safer, durable SIBs.

25 ENERGY STORAGE↗
DOE OSTI2020

Wettability and capillary effects: Dynamics of pinch-off in unconstricted straight capillary tubes

We study the interfacial evolution of immiscible two-phase flow within a capillary tube in the partial wetting regime using direct numerical simulation. We investigate the flow patterns resulting from the displacement of a more viscous fluid by a less viscous one under a wide range of wettability conditions. We find that beyond a wettability dependent critical capillary number, a uniform displacement by a less viscous fluid can transition into a growing finger that eventually breaks up into discrete blobs by a series of pinch-off events for both wetting and non-wetting contact angles. This study validates previous experimental observations of pinch-off for wetting contact angles and extends those to non-wetting contact angles. We find that the blob length increases with the capillary number. We observe that the time between consecutive pinch-off events decreases with the capillary number and is greater for more wetting conditions in the displaced phase. Here, we further show that the blob separation distance as a function of the difference between the inlet velocity and the contact line speed collapses into two monotonically decreasing curves for wetting and non-wetting contact angles. For the phase separation in the form of pinch-off, this work provides a quantitative study of the emerging length and time scales and their dependence on the wettability conditions, capillary effects, and viscous forces.

42 ENGINEERING↗
DOE OSTI2020

Imaging transient solidification behavior

Solidification processing offers the first opportunity to control microstructure, properties, and performance in metallic alloy components. Until recently, microstructural evaluations were limited to post-solidification characterization by destructive methods. We review the development of time-resolved, in situimaging techniques capable of capturing solid-liquid interfacial evolution in metallic alloys with high spatial and temporal resolution underdiverse solidification conditions relevant for applications ranging from conventional directional solidification, crystal growth, and casting,to welding and additive manufacturing. These experiments enable direct visualization of transient behaviors that would otherwise remain unknown, uniquely providinginsights into the physics that impact microstructure and defect development and strategies for microstructuralcontrol and defect mitigation. Understanding microstructural evolution and the characteristics that form under various solidification conditions is essential for the development of multiscale, experimentallyinformed predictive modeling. This is highlightedby solidification simulations that utilize in situmeasurements of solidification dynamics from state-of-the-art experimental techniques.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Machine-learning interatomic potentials for interfaces in all-solid-state batteries: Perspectives on training data, model selection, and validation

Interfaces play a pivotal role in dictating the performance and reliability of all-solid-state batteries (ASSBs), where complex electro-chemo-mechanical phenomena at grain boundaries (GBs) and interfaces can lead to degradation and failure. Traditional atomistic simulation methods, such as first-principles calculations and classical molecular dynamics, face limitations in modeling these interfaces due to either high computational cost or insufficient transferability to the diverse atomic environments evolving at interfaces. Machine-learning interatomic potentials (MLIPs) have emerged as a transformative approach, enabling large-scale, high-accuracy simulations of disordered and chemically complex systems by leveraging the predictability of machine learning models trained on first-principles data. Recent applications of MLIPs have demonstrated their ability to capture intricate behaviors at ASSB interfaces, including ion transport, interfacial evolution, and degradation mechanisms, with accuracy and efficiency unattainable by conventional methods. This prospective paper presents comprehensive analysis and practical guidance for MLIP development for GBs and interfaces in ASSBs, with a focus on three key pillars: data generation, model selection, and validation. Here, we review the current state of MLIP applications for GBs and interfaces in both general and ASSB-specific materials, highlighting best practices and challenges in constructing diverse and representative datasets, choosing appropriate machine learning architectures, and rigorously validating model performance. We also discuss emerging strategies and opportunities for improved reliability and efficiency of MLIPs to simulate realistic interfaces in ASSBs.

Energy - Storage↗
DOE OSTI2020

Correlation between the temperature evolution of the interfacial region and the growing dynamic cooperativity length scale

Here, we study experimentally the temperature evolution of the thickness of the interfacial layer, L int (T), between bulk matrices and the surface of nanoparticles in nanocomposites through broadband dielectric spectroscopy. Analyses revealed a power-law dependence between the logarithm of structural relaxation time in the interfacial layer, τ int (T), and the L int (T): ln τ i n t ( T ) / τ 0 ∝ L i n t β ( T ) / T , with τ 0 ~ 10 –12 s, and β index ~0.67 at high temperatures and ~1.7 at temperatures close to the glass transition temperature. In addition, our analysis revealed that the L int (T) is comparable to the length scale of dynamic heterogeneity estimated from previous nonlinear dielectric measurements and the four-point NMR [ξ NMR (T)], with L int (T) ~ ξ NMR (T). These observations may suggest a direct correlation between the L int (T) and the size of the cooperatively rearranging regions and have strong implications for understanding the dynamic heterogeneity and cooperativity in supercool liquids and their role in interfacial dynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Structural and electrochemical evolution of alloy interfacial layers in anode-free solid-state batteries

“Anode-free” solid-state batteries feature high energy density since there is no anode active material. Although the beneficial effects of interfacial layers at the anode-solid electrolyte interface have been demonstrated, the mechanisms through which they influence lithium plating/stripping are unclear. Here, in this study, we reveal the evolution of 100-nm silver and gold interfacial layers during lithium plating/stripping using electrochemical methods, electron microscopy, X-ray microcomputed tomography, and modeling. The alloy layers improve Coulombic efficiency and resistance to short circuiting, even though the alloys form solute regions or particulates that detach from the current collector during plating. In situ electrochemical impedance spectroscopy shows that the alloys return to the interface and mitigate contact loss at the end of stripping, avoiding a critical vulnerability of anode-free cells. Contact retention is driven by even Li thickness that promotes spatially uniform stripping, as well as local alloy delithiation in response to current concentrations that homogenizes current and diminishes voiding.

25 ENERGY STORAGE↗
DOE OSTI2024

Thermally induced structural evolution and nanoscale interfacial dynamics in Bi-Sb-Te layered nanostructures

Layered chalcogenides, including Bi-Sb-Te ternary alloys and heterostructures, are renowned as thermoelectric and topological insulators and have recently been highlighted as plasmonic building blocks beyond noble metals. Here, we conduct joint in situ transmission electron microscopy and density functional theory calculations to investigate the temperature-dependent nanoscale dynamics and interfacial properties, identifying the role of native defects and edge configurations in the anisotropic sublimation of Bi 2 Te 3 -Sb 2 Te 3 heterostructures and Sb 2-x Bi x Te 3 alloys. We report structural dynamics, including edge evolution, layer-by-layer sublimation, and the formation and coalescence of thermally induced polygonal nanopores. These nanopores are initiated by preferential dissociation of tellurium, reducing thermal stability in heterostructures. Triangular and quasi-hexagonal configurations dominate nanopore structures in heterostructures. Our calculations reveal antisite defects (Te Sb and Te Bi ) as key players in defect-assisted sublimation. These findings enhance our understanding of nanoscale dynamics and assist in designing tunable low-dimensional chalcogenides.

Bi2Te3-Sb2Te3 heterostructure↗
DOE OSTI2025

Probing the Impact of Vacancy Diffusion on Void Dynamics at the Lithium Metal–Solid Electrolyte Interface

Lithium (Li) metal-based solid-state batteries (SSBs) are considered promising candidates for next-generation energy storage due to their superior energy density and enhanced safety compared to conventional Li-ion systems. However, their practical application is limited by challenges such as void formation at the Li-solid electrolyte (SE) interface, which disrupts ion transport and accelerates interfacial degradation. This work investigates how the coupled effects of electro-dissolution kinetics and surface diffusion at the Li metal surface govern the evolution of interfacial morphology during stripping. This work examines the influence of three distinct surface diffusion modes, which are terrace diffusion, step diffusion, and interlayer diffusion, on maintaining interfacial stability. In addition, how the dominant surface diffusion mechanism can overcome the contact loss due to high reaction kinetics is explored. Furthermore, the roughness of the Li metal anode surface is quantified, and the influence of different diffusion mechanisms on the evolution of the dynamic solid–solid interface is examined. The critical role of temperature in enhancing Li surface diffusivity and expanding the regime of stable contact is highlighted. By identifying distinct regimes of interface stability, this study analyzes how non-uniform electrochemical dynamics dictate void morphology evolution and interfacial contact. These insights offer guiding principles for engineering robust Li–SE interfaces in SSBs.

lithium metal anode↗
DOE OSTI2021

In Situ ATR-FTIR Study of the Cathode–Electrolyte Interphase: Electrolyte Solution Structure, Transition Metal Redox, and Surface Layer Evolution

We present a study of the lithium nickel manganese cobalt oxide (LiNi 0.6 Mn 0.2 Co 0.2 O 2 , NMC622) cathode-electrolyte interphase (CEI) during galvanostatic charging and discharging using in situ attenuated total reflectance Fourier transform infrared (ATR-FTIR) methods to investigate the voltage dependent electrolyte solution structure changes at the interface, transition metal (TM) redox chemistry, and cathode/electrolyte interfacial layer evolution. Furthermore, our in situ cell design provides both reliable electrochemical device testing and strong FTIR vibrational absorption signals near the cathode surface. Specifically, advanced spectral analysis elucidates changes of near-surface Li+ ion (de)solvation by solvent molecules during galvanostatic cycling. Moreover, cathode metal-oxygen vibrational absorptions, sensitive to TM redox behaviors and subsequent local structural variations, were correlated to cathode de-lithiation (and lithiation) and electrolyte solution structure changes. In addition, we have detected the formation and evolution of a CEI surface layer on the NMC622 cathode that contributes to the cell's capacity fade.

25 ENERGY STORAGE↗